Sample iOS files?

I'm looking for a sample FLA file so I can just do a quick publish and preview on iPhone to see how the whole process goes. I just bought CS5.5 and I can't seem to find any tutorial FLA files anywhere. Either I'm not looking in the right place or they do not exist. Also couldn't find any via Googling.
Help?

I've found Flah files available wih some books helpful. Admittedly they aren't CS5.5 but the following might be helpful because both have downloadable sample files available...
"IOS Development with Flash" by Julian Dolce
"Professional Flash Mobile Development" by Richard Wagner
Hope that's of help
David

Similar Messages

  • How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

    How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

    Thank you!
    Disabling firewall and AV did the trick!
    Kudos.
    Alex

  • BPC 5 - Best practices - Sample data file for Legal Consolidation

    Hi,
    we are following the steps indicated in the SAP BPC Business Practice: http://help.sap.com/bp_bpcv151/html/bpc.htm
    A Legal Consolidation prerequisit is to have the sample data file that we do not have: "Consolidation Finance Data.xls"
    Does anybody have this file or know where to find it?
    Thanks for your time!
    Regards,
    Santiago

    Hi,
    From [https://websmp230.sap-ag.de/sap/bc/bsp/spn/download_basket/download.htm?objid=012002523100012218702007E&action=DL_DIRECT] this address you can obtain .zip file for Best Practice including all scenarios and csv files under misc directory used in these scenarios.
    Consolidation Finance Data.txt is in there also..
    Regards,
    ergin ozturk

  • Sample .PDF files from Adobe versions 9, 10, 11, etc.

    I'm a software developer/tester and I'm currently testing a new software we are using to manipulate/upload PDF files to our website.  The software opens the PDF, counts the number of pages, displays the page numbers in a listbox, then lets users select which pages from the original document they would like to upload as a new document.
    That is working just fine.
    Where I could use some help is getting sample .PDF files created in Adobe 9, 10, 11, etc (1.7 ext 1, 3, 5 ,etc).  I want to test each version because we've had issues with a previous 3rd party software where it would not handle later versions (anything past 8, I believe).  I have Adobe 8.1 on my development machine right now and unfortunately I need to keep it the same version to handle PDF creation for other projects which can't handle the later versions.
    I've googled and googled and there doesn't seem to be a site that just has sample PDF files formatted in the various versions.  Can anyone point me in the right direction or host a few small PDF files?  If possible it would be better if they were at least 2 pages so I can test the extract pages feature.
    Thanks,
    James

    You refer to the extension levels, but they're nothing to do with the version of Acrobat - they relate to what's in the file. If you have 3D or Rich Media, you get an EL3 file - doesn't matter if you author it in A9 or AXI. Genuine EL5 PDF files are very rare, as the spec only introduced a couple of little-used options such as ColorDodge transparency blending. Most of them are actually XFA files from LiveCycle, as that's the version tag used to wrap XFA3 code.

  • HT4792 So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version i

    So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
    Thanks

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • How can i get sample CSV files for Demo BI Content

    Hello Experts. Documentation say that there is sample CSV files for modules that come with delivered BI content. I am planning to work with the demo content which i have already installed. I then need to populate the objects with the relevant demo data that is said to be in the CSV files that come with the demo content. Please let me know from where i can get these CSV files. Good day.

    Hi Huggins,
    There are sample csv data in AL11 in the work directory.  You may want to look through here to see if the csv files you require are there.
    Thanks,
    Nick.

  • Sample Data Files for P Card Testing

    Is there a utility available that can be used to easily create sample data files for use when testing P Card functionality? We will be using the USBank/Visa file format. Generating enough sample data is time consuming especially in the volumes we need.
    Thanks,

    the plan is to cover all the training materials.. BPC420, 430,440 in next 2-3 weeks if possible. Though Immediate need is to learn planning .
    Looking at SAP training support files (I have course material) or any complete case study data which I can do from scratch.. I have just been doing it for 3-4 days.. already understand the basic stuff.. Pretty comfortable with SAP ECC & BW (both technical and function stuff)..
    Lukesh

  • WLC Custom Web Auth Bundle sample .tar file is not on WCS

    The WLC documentation would make it appear (or maybe previously) you should download a sample web auth bundle code from the WCS Templates. I was never able to find a sample .tar file on the WCS 7.0.172.0 templates.
    However I found on Cisco.com under Support > Downloads > Products >Wireless> Wireless LAN Controller Standalone Controllers> Cisco 5500 Series Wireless Controllers > Cisco 5508 Wireless Controller > Wireless Lan Controller Web Authentication Bundle-1.0.2  > webauth_bundle-1.0.2.zip
    It was updated in June 2011, some pretty good sample html code.
    The readme.html in the sample webauth_bundle-1.0.2.zip file has been very helpful , almost as good as the suppport community web page on custom web auth.
    https://supportforums.cisco.com/docs/DOC-13954

    WCS config guide 7.0.172 is correct
    http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/temp.html#wp1129979
    The bundle in WCS is downloaded through :
    configure->controller
    "select a command"-> download customized webauth bundle.
    Just tested it and it was there.
    The one on cisco.com is better though

  • Testing of IR without sample XML file

    Hi Experts, Is there any way to test the Design part (IR) without using the sample XML file. and also Please let know How to test the Configuration part (ID) only, whether my setup in ID is correct or not?
    Thanks in advance
    - Manoj

    Hii MaNoj !!
    1) If mapping is thier Without XML u cant test IR design....
    XI will always convert any input format to XML format (SOAP with attachments) for its own internal processing.
    So text file will be converted to XML in XI and after mapping if you want the output again to be text file then you will have to use file content conversion to convert this XML back to text format using FCC in the receiver file adapter.
    2) If you are not looking at doing any mapping (transformation) but just want to move a text file from one location to another in that case xml conversion can be avoided.
    XI in the role of a FTP

  • Sample CSV file for Master Schema Upload in CCM

    Hi All,
    Can some please send me a sample CSV file for Master Schema Upload in CCM to my ID <i>[email protected]</i>. Points will be awarded for the same
    Regards
    Hari

    Hi
    Sent the same to your email id. )
    Regards
    - Atul

  • Process to migrate an mode LWAPP to IOS File in Aironet 1310

    I like to know a process for migrate LWAPP to IOS File.
    Thank

    Hi Friend,
    have a look here
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    This paragraph in the document describes the
    conversion of a LWAPP enabled to an IOS enabled AP.
    Best reagrds,
    Frank

  • Flash MX 2004 Sample *.fla files

    I'm just learning flash using Flash MX pro 2004. The Flash
    "help" refers to sample files such as "document_start.fla" Where
    can I download these samples from?

    After including 'hidden and system" files in my search, I was
    able to locate the *.fla sample tutorial files for MX 2004 on my
    computer.

  • I want to configure per-app vpn . can i get a sample mobileconfig file

    how do i configure or make a payload for per-app vpn configuration. can someonw provide me with a sample mobileconfig file please

    sorry couldnt find any way to appeand info to my qt hence adding in reply:
    my problem is similar to the one discussed in this forum https://forums.openvpn.net/topic13887.html

  • Photoshop Elements 8 - Need IOS file

    I have a copy of Photoshop Elements 8, which I am trying to install on my new laptop (no drive).  Looking to download from the website, but only the Windows file is available.  Any ideas?  Don't want to buy a Creative Cloud subscription (or any other Adobe one for that matter) to do what I need.

    You don't need the iOS file, you need the mac file, which you can find here:
    http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    (iOS is the operating system for ipads and iphones. It's not the same as OS X, which is what macs use.)

  • "iOS Files" Folder, what's it doing here?

    Hello! Ok my desktop was such a mess, I had to organise all my files and put them in the correct places. And now I'm stuck with the last folder on my desktop which is called "iOS Files". And I have absolutely no idea where it comes from, what it is, or what to do with it. I'm affraid of deleting it because it might mess up my computer even more. I've had this iMac since beginning of september. What shall I do with this folder now?
    Here's a screenshot:
    Hope you guys can help me out! Cheers

    Nobody?

Maybe you are looking for

  • Sudden x10 increase in iPhone data use

    I've got an iPhone 4, with O2 in the UK.  I normally use about 300MB per month.  That's suddenly gone through the roof; this month I've used 950MB in 2 ½ weeks, including 450 MB in 3 days.  That's a rise from about 10MB a day to about 120MB.  My phon

  • Url to call Integration engine from Webserver

    Hi All, Please let me know what is the url to call INtegration engine from Webserver I know below is url which we will use to call Adapter engine..But i need direct call to Integration engine http://server:50100/XISOAPAdapter/MessageServlet?channel=:

  • Set up a group list in e.mail ???

    How can I set up a "group list" (in my e.mail) in my 4s like I have on my big Mac?  When I want to send a message to a large group of friends?  

  • How do i transfer photos from my camera roll to my own folders

    i cant seem to work out how to put the photos from my camera roll to my own personilised folders does anyone no how to laura

  • Understanding Transfer Structure Application Tables

    Hello Gurus, We have implemented the 0COPC_C07 Cube beginning of last year. Basis recently questioned us about the increasing size in the /BIC/B0000116000 ("Transfer Structure Application 0CO_PC_ACT_10") table. The table currently holds 32Gb of infor