Sample quantity consumption in QA11

Dear All,
I have come across a scenerio where in sample unit of measure is other than inspection lot unit of measure and we want to post sample stock in the other uom only.
Scenerion-
Inspection lot is created in the base unit of measure 'BT'. At the time of testing we are taking the tablets from the packed product. Now produced material base UOM is BT but I am taking samples in tabletes because we dont want to waste entire bottle.
Now at the time of sample posting we want system to consume sample quantity in 'Tablets' and not in bottles. But system is not giving such kind of flexibility over there.
Is this requirement can be fulfilled by some of workaround ? Pls. suggest.
Regards
Amit Patil

You need to maintain a conversion between your bottle and tablets in your material master.  Then create your inspection plan for tablets and assign the material to it.
In hindsight, your BUOM really should be tablets and not a bottle.  Typically it is recommended that the smallest utlized UOM is what you want to use for your BUOM.
Craig

Similar Messages

  • Mapping Physical Sample Quantity - Inspection Plan Characteristics Quantity

    Hello,
    There is a requirment to map Physical Sample Quantity QPRS-MENGE (Size of the Physical Sample) with PLMK-PRUEFEINH (Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.)) based upon Inspection Lot.
    Thanks and Regards,
    Prabhjot Singh
    Moderator message: OK, so please start working on your requirement.
    Edited by: Thomas Zloch on Apr 1, 2011 1:56 PM

    why can't we use Physical sample drawing process (T.code:QPV2 ) for auto creation of physical samples.

  • Decision required for sample quantity in foreground processing

    Hi,
    I'm trying to do a GR using LB11 but when I try do execute TO in background I receive this error in the log.
    "Decision required for sample quantity in foreground processing"
    Trying in foreground I have in following message: Inspection sample quantity must be greater than 0 for this processing.
    May I have a missing configuration in the strategies?
    I need to do this on background.

    I just found that the interface QM-WM was not fully configured in SPRO.
    The interface control WM-QM was not set correctly for the storage Type search sequences.

  • Change of Sample quantity.

    Dear all,
    We are using inspection plan (task list type Q) for result recording for all the inspection lots. Prepared individual inspection plan for each material, hence the specs are different for each material. To reduce the number of MIC we have kept all the MIC as “Incomplete Copy model”. So set the details for the MIC like Control Indicators, Sampling Procedures, Specification Limits, Selected Set, Sample Size etc. in the inspection lot itself.
    Now as per some business process changes the sample quantity is required to be changed for all the MICs in all the inspection plans.
    So, is there any way to changes the sample size in the inspection plan in Bulk (Mass Change)?
    Regards,
    Shyamal.

    Hi,
    Try this out.
    In CWBQM , In current working screen area , you will have options - Header level and operation level.
    Select operation level working area & proceed.
    (At header level , it is not allowing to do changes )
    Select the matls using multiple selection , you will get the operation wise list.
    From there , you can go to inspection char level.
    Here it will allow to do mass change the sampling procedure by selecting rows and sampling proc column.
    I could do mass change only at the char level & not at that operation level. I am not sure , whether it can be done at the operation level.
    Hope this will helps you.
    Regards
    K.M.Arun

  • QM Sample quantity (TR to TO)

    Hi Friends,
        I am getting a problem while creating TO for TR automatically. There are four options for sample quantity in LT04.
    1. Insp.sample qty remains in GR area
    2. Transfer qty to inspection bin
    3. Place quantity into stock
    4.Skip TR item
    By default first option is getting selected but I need to select third option by default . From which config setting it is possible?
    Regards,
    Neel
    Edited by: Neel_QM on Aug 17, 2011 8:05 PM

    Hi,
      While doing GR , TO should be created automatically. But due to config missing "Place quantity into stock"(as per previous mail) is not getting selected automatically so bin is not getting updated for Quality Stock automatically. While doing MIGO TR is creating in WM tab but it should not create. Please let me know if you need screen shot for better understanding.
    Regards,
    Neel
    Edited by: Neel_QM on Aug 18, 2011 1:57 PM

  • Sample Quantity to be in alternative Uom

    Dear QM Gurus,
    We have a material which has basic uom as KG. We will be maintaining the alternative uom as PCS and conversion factor as 1KG = 1330 PCS in Material master. Now we want sample quantity in the inspection lot to be created in alternative uom instead of basic uom. Already we maintained PCS in inspection plan header level & MIC. But still the sample quantity is coming in KG.
    Kindly guide me to solve this issue.

    Refer
    Sample size to maintain in gram when base qty in Tons

  • Base sample Quantity

    Dear Experts,
    While creating Inspection plan system is not allowing to enter more than 3 digits of the sample base quantity in the inspection characteristics overview screen . What is the maximum number of digits we can enter .
    Thanks.

    Hi SAP LOVER,
    This is SAP STD you can't change.

  • Adding excess quantity field in QA11

    Hello experts,
    I have a requirement to add one more field "extra recieved" in tcode QA11 below the field "short received" on screen "Record usage decission:stock" under tab "inspection lot stock".
    Is it possible to add this new field in this tcode,if yes, what is the corresponding user exit or badi for this.
    I tried to search for exits and badi for this tcode but didn't found any.
    Moreover, I found enhancement-points in the abap code of this corresponding screen but already code is added in all enhancement points, also please tell me is it possible to create new enhancement point in standard abap code.

    Hi Shubh,
    I do not think it is possible to add fields in existing tabs.If you want extra custom fields add a custom tab and check.See the documentation of this badi QEVA_SUBSCREEN_1101.
    Regards,
    Madhu.

  • Sample quantity

    Dear Friends
    We have a audit requirement wherein we have to mention Sample quanity for inspection.
    How to incorporate this in 01 & 04 type inspection?
    Kindly reply
    Thanks
    Vidyadhara Basri

    Dear Sami,
    Pls elobrate your sampling scheme again. It seems from here that schema is not working over here in this case, may be because your Lot sice is not corresponding to it or due to some ohter reason, but what I can derive, your scheme is not wroking, because,,,,,,,
    The conversion factor for gal to lit is some,, 1gal=3.785412 Lit, according to it 50gal (your Lot size) = 189.2706 lit. And yor total number of physical same is 3 (from your SDP) so system is deviding the lot size / number of physical samle,
    This is the picture I can assume from your thread.
    Now pls let me know,
    What is the sample size u'ave defined in the tasklist?
    What is the sample type you have defined the Sampling Type? It must reperesent the Scheama, but as per the sample calculation you have described it seems that it may have "FIXED SAMPLE".
    Update us to help you more!!!. And reward points (if helpfull) to help you better!!!!
    Regards,
    Shyamal Joshi

  • QA11 - Quantity Posting

    HI All,
    Iam posting some quantity through the QA11 BDC by considering the Materials having the quality stock(having the inspection lot origin = 09 only). But for some materials the qauality inspection stock is maintined in both the 08 and 09 types. In that case my bdc is failing with an error message "The Sum of the Quantities that still must be posted is    100".
    Could u suggest me how to post the quantity through the QA11 successfully(with 09 only). Is there any BAPI or alternative to post it ?
    Thank you.
    Regards,
    Padmasri.
    Edited by: Padmasri on Jul 30, 2009 2:36 PM

    Check BAPI_INSPLOT_SETUSAGEDECISION
    Kanagaraja L

  • QM-WM Sample Error

    Dear QM gurus ,
    We are facing the error of sample quantity posting to a storage type (In background),although we have posted all stock (Including sample qualntity) to untrstricted stock.
    Hope to hear from you soon
    ~ Ram

    Hi Rene,
    The QM-WM interfacing settings are already done for inspection sample control.
    We are facing following problem as,we posted total (100 %) quantity to unrestricted stock during usage decision.After this posting,system automatically generates transfer order and confirms it.Now when we check the stock at storage type level its showing 99% of stock in high rack storage and 1% (quantity = sample size defined in inspection plan) of the stock to sample storage type.We wonder how it happens.
    Please note that in WM/QM interface for sampling procedure,we maintaied the inspection sample handling in WM as 3 for respective warehouse type
    Hope to hear from you soon
    ~ Ram

  • Availability of Standard Physical Sample Report

    QPR3 Tcode provides Physical Sample details for only one Inspection Lot at a time
    Instead I need below details
    Input Data :
    Material                From     To
    Batch               From     To
    Plant               From     To
    Inspection Lot          From     To
    Physical Sample Number     From     To
    Sample-Drawing Number     From     To
    Sample Category          From     To
    System status          From     To     (Internal Status of Physical-Sample Record)
    Physical Sample Release Date     From     To
    QM mat. auth.          From     To
    Creation Date of Physic Sample     From     To
    Output :
    1) Material No
    2) Material name
    3) Batch
    4) Inspection Lot
    5) Physical Sample No
    6) Plant
    7) Sample Category
    8) Status (Internal Status of Physical-Sample Record)
    9) Vendor ( No & Name )
    10) Manufacturer ( No & Name )
    12) Drawing number
    13) Created by
    14) Creation Date of Physical Sample
    15) Released By
    16) Physical Sample Release Date
    17) Time of Physical Sample Release
    18) Sample Quantity
    19) Unit of Measure for Physical Sample Size
    20) Sample-Drawing Procedure
    21) QM mat. auth.
    22) Insp. Lot Qty
    23) SampleSize
    24) No. Containers
    25) Lot Cntnr.
    26) Group
    27) Group Counter
    28) System Status ( Inspection Lot )
    Is there any provision for accessing same above details via SAP Standard Report
    Kunal Sheth

    Get Solved

  • How to consider sample qty of raw material's quality inspection during mrp.

    hi expert.
    i have to consider sample qty of raw material's quality inspection during mrp.
    i am wondering how to implement it.
    is this possible?
    thank you~~!!

    Hi Seung Hyun,
    I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
    If it is fixed quantity, then there are several alternatives to follow:
    Include the sample quantity to your safety stock
    Create another material number to distinguish the sample from the original raw material number and include it in the BOM
    Regards,
    Julian

  • Reduction of Samples from all SUs

    Dear QM experts,
    A goods receipt is done for , say 5 Containers each with a SU number (Warehouse Management is active).
    The samples are drawn one each from each of the containers
    After Usage decision ,Posting to Sample usage is carried out.
    In the Transfer Order that is created and confirmed automatically, system reduces the entire Sample quantity from the first SU number.
    How can we make the system reduce the quantity from each of the SU numbers as physically one sample will be taken from each SUs.
    Regards,
    Sudhakar

    Are you using HU managed inventory? If so, this documentation should help - [http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/584bcba70f11d2b44e006094b9b9dd/content.htm]. In particular refer the section on "sample calculation".

  • Inspection lot sample Qty change manual

    Dear Friends ,
    Is there any T Code or procedure to change inspeciton lot sample size in inspection lot
    like how we change the Inspection lot Qty
    Thanks & Regards
    Raj

    Hi
    You can only reset the sample Quantity using qa02>enter inspection lot>click on sample ->save>This will reset the sample(remove task list)
    Now you can change the task list an attach modified sample
    Or
    Assign manual sapme calculation in Inspection type (without inspection task list)
    This will allow you to maintain/enter the manual sample size during lot creation.
    try this

Maybe you are looking for

  • Item having 0 price is going through credit check

    Hi, We are facing following issue- Our sales order is having multiple line items including a line item which creates network. When we enter the line items with price in sales order, the sales order goes into credit check. Then we review & release the

  • Using async in an AIR application?

    After reading this FlexUnit tutorial: http://www.adobe.com/devnet/flex/articles/flashbuilder4_tdd.html I downloaded the files here: http://download.macromedia.com/pub/developer/flashbuilder4_tdd_source.zip ...and changed the project, FlexUnit4Example

  • Need to delete specific Months Data from SQL Server Table

    Greetings Everyone, So i have one table which contains 5 years old data, now business wants to keep just one year old data and data from qurter months i.e. (jan, mar, June, sep and December), i need to do this in stored procedure. how i can achive th

  • How do i get "locked" items out of my trash  OsX 10.7.5

    I have some items my trash that are locked.  I've tried unlocking them via preferences but still cannot delet or restrore to clear the trash.  Any help would be greatly appreciated. Mulletboy

  • Changes in PO

    Hi all Can I make changes to PO after GR/IR? Can I change the tax code in PO after the GRN is made? What will be the effects on GR/IR if PO is changed?