Sample rate too high for swf or PowerPoint export

Hi,
I have a few presentations that need to be exported to swf or PowerPoint. Each of the slides use audio Voice Over. The problem is that when I go to export I'm told that because the audio uses a sample rate of 48khz it can't be exported.
Anyone know if there is a way around this?
Thanks

Yes I meant to say AC3 (Dolby Digital) instead of
AAC.
Sorry for the confusion.
OK, thanks for clearing that up.
What bitrate (avg./max.) are you using for the video? With three angles, the maximum combined bitrate for each track (including audio) cannot exceed 8Mbps.

Similar Messages

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

PGC has an error--data rate of this file is too high for DVD

Getting one of those seemingly elusive PGC errors, though mine seems to be different from many of the ones listed here. Mine is telling me that the data rate of my file is too high for DVD. Only problem is, the file it's telling me has a datarate that is too high, is a slideshow which Encore has built using imported jpg files. I got the message, tried going into the slideshow and deleting the photo at the particular spot in the timeline where it said it had the problem, now getting the same message again with a different timecode spot in the same slideshow. The pictures are fairly big, but I assumed that Encore would automatically resize them to fit an NTSC DVD timeline. Do I need to open all the pictures in Photoshop and scale them down to 720x480 before I begin with the slideshows?

With those efforts, regarding the RAM, it would *seem* that physical memory was not the problem.
I'd look to how Windows is managing both the RAM addresses and also its Virtual Memory. To the former, I've seen programs/Processes that lock certain memory addresses upon launch (may be in startup), and do not report this to Windows accurately. Along those lines, you might want to use Task Manager to see what Processes are running from startup on your machine. I'll bet that you've got some that are not necessary, even if IT is doing a good job with the system setup. One can use MSCONFIG to do a trial of the system, without some of these.
I also use a little program, EndItAll2 for eliminating all non-necessary programs and Processes, when doing editing. It's freeware, has a tiny footprint and usually does a perfect job of surveying your running programs and Processes, to shut them down. You can also modify its list, incase it wants to shut down something that IS necessary. I always Exit from my AV, spyware, popup-blocker, etc., as these progams will lie to EndItAll2 and say that they ARE necessary, as part of their job. Just close 'em out in the Tasktray, then run EndItAll2. Obviously, you'll need to do this with the approval of IT, but NLE machines need all available resources.
Now, to the Virtual Memory. It is possible that Windows is not doing a good job of managing a dynamic Page File. Usually, it does, but many find there is greater stability with a fixed size at about 1.5 to 2.5x the physical RAM. I use the upper end with great results. A static Page File also makes defragmenting the HDD a bit easier too. I also have my Page File split over two physical HDD's. Some find locating to, say D:\ works best. For whatever reason, my XP-Pro SP3 demanded that I have it on C:\, or split between C:\ and D:\. Same OS on my 3 HDD laptop was cool having it on D:\ only. Go figure.
These are just some thoughts.
Glad that you got part of it solved and good luck with the next part. Since this seems to affect both PrPro and En, sounds system related.
Hunt
PS some IT techs love to add all sorts of monitors to the computers, especially if networkded. These are not usually bad, but are usually out of the mainstream, in that most users will never have most of these. You might want to ask about any monitors. Also, are you the only person with an NLE computer under the IT department? In major business offices, this often happens. Most IT folk do not have much, if any, experience with graphics, or NLE workstations. They spend their days servicing database, word processing and spreadsheet boxes.

ORA-25307: Enqueue rate too high, flow control enabled

I am stuck. I have my stream setup and they were previously working on two of my dev environments well. Now when I get the streams setup the CAPTURE process has a state of "CAPTURING CHANGES" for like 10 seconds and then changes to state "PAUSED FOR FLOW CONTROL". I believe this is happening because the PROPAGATION process is showing an error of "ORA-25307: Enqueue rate too high, flow control enabled".
I don't know what to tweak to get rid of this error message. The two environments are dev databases and there is minimal activity on them so i don't think it's a case of the APPLY process is lagging behind the PROPAGATION process. Has anyone run into this issue?? I've verified my db link works, my stream admin user has dba access. Any help or advise would be greatly appreciated.
thanks, dave

As rule of thumb, you don't need to set GLOBAL_NAME=TRUE as long as your are 100% GLOBAL_NAME compliant.
So, setting GLOBAL_NAME=TRUE will not have any effect if your dblink is not global_name compliant
and if your installation is global_name compliant, you don't need to set GLOBAL_NAME=TRUE.
The first thing when you diagnose is to get the exact facts.
Please run this queries both on source and target so that to see what are in the queues and where.
Run it multiple time to see if figures evolves.
- If they are fixed, then your Streams is stuck in its last stage. As a cheap and good starting point, just stop/start the capture, propagation and target apply process. Check also the alert.log on both site. when you have a propagation problem, they do contains information's. If you have re-bounced everything and no improvement then the real diagnose work must start here but then we know that the message is wrong and the problems is elsewhere.
- if they are not fixed then your apply really lag behind for what ever good reason, but this is usually easy to find.
set termout off
col version new_value version noprint
col queue_table format A26 head 'Queue Table'
col queue_name format A32 head 'Queue Name'
select substr(version,1,instr(version,'.',1)-1) version from v$instance;
col mysql new_value mysql noprint
col primary_instance format 9999 head 'Prim|inst'
col secondary_instance format 9999 head 'Sec|inst'
col owner_instance format 99 head 'Own|inst'
COLUMN MEM_MSG HEADING 'Messages|in Memory' FORMAT 99999999
COLUMN SPILL_MSGS HEADING 'Messages|Spilled' FORMAT 99999999
COLUMN NUM_MSGS HEADING 'Total Messages|in Buffered Queue' FORMAT 99999999
set linesize 150
select case
when &version=9 then ' distinct a.QID, a.owner||''.''||a.name nam, a.queue_table,
              decode(a.queue_type,''NORMAL_QUEUE'',''NORMAL'', ''EXCEPTION_QUEUE'',''EXCEPTION'',a.queue_type) qt,
              trim(a.enqueue_enabled) enq, trim(a.dequeue_enabled) deq, x.bufqm_nmsg msg, b.recipients
              from dba_queues a , sys.v_$bufqm x, dba_queue_tables b
        where
               a.qid = x.bufqm_qid (+) and a.owner not like ''SYS%''
           and a.queue_table = b.queue_table (+)
           and a.name not like ''%_E'' '
   when &version=10 then ' a.owner||''.''|| a.name nam, a.queue_table,
              decode(a.queue_type,''NORMAL_QUEUE'',''NORMAL'', ''EXCEPTION_QUEUE'',''EXCEPTION'',a.queue_type) qt,
              trim(a.enqueue_enabled) enq, trim(a.dequeue_enabled) deq, (NUM_MSGS - SPILL_MSGS) MEM_MSG, spill_msgs, x.num_msgs msg,
              x.INST_ID owner_instance
              from dba_queues a , sys.gv_$buffered_queues x
        where
               a.qid = x.queue_id (+) and a.owner not in ( ''SYS'',''SYSTEM'',''WMSYS'') order by a.owner ,qt desc'
   end mysql
from dual
set termout on
select &mysql
/B. Polarski

PGC...data rate too high

Hallo,
message
nunew33, "Mpeg not valid error message" #4, 31 Jan 2006 3:29 pm describes a certain error message. The user had problems with an imported MPEG movie.
Now I receive the same message, but the MPEG that is causing the problem is created by Encore DVD itself!?
I am working with the german version, but here is a rough translation of the message:
"PGC 'Weitere Bilder' has an error at 00:36:42:07.
The data rate of this file is too high for DVD. You must replace the file with one of a lower data rate. - PGC Info: Name = Weitere Bilder, Ref = SApgc, Time = 00:36:42:07"
My test project has two menus and a slide show with approx. 25 slides and blending as transition. The menus are ok, I verified that before.
First I thought it was a problem with the audio I use in the slide show. Because I am still in the state of learning how to use the application, I use some test data. The audio tracks are MP3s. I learned already that it is better to convert the MP3s to WAV files with certain properties.
I did that, but still the DVD generation was not successful.
Then I deleted all slides from the slide show but the first. Now the generation worked!? As far as a single slide (an image file) can not have a bitrate per second, and there was no sound any more, and as far as the error message appears AFTER the slide shows are generated, while Encore DVD is importing video and audio just before the burning process, I think that the MPEG that is showing the slide show is the problem.
But this MPEG is created by Encore DVD itself. Can Encore DVD create Data that is not compliant to the DVD specs?
The last two days I had to find out the cause for a "general error". Eventually I found out that image names must not be too long. Now there is something else, and I still have to just waste time for finding solutions for apparent bugs in Encore DVD. Why doesn't the project check find and tell me such problems? Problem is that the errors appear at the end of the generation process, so I always have to wait for - in my case - approx. 30 minutes.
If the project check would have told me before that there are files with file names that are too long, I wouldn't have had to search or this for two days.
Now I get this PGC error (what is PGC by the way?), and still have no clue, cause again the project check didn't mention anything.
Any help would be greatly appreciated.
Regards,
Christian Kirchhoff

Hallo,
thanks, Ruud and Jeff, for your comments.
The images are all scans of ancient paintings. And they are all rather dark. They are not "optimized", meaning they are JPGs right now (RGB), and they are bigger then the resolution for PAL 3:4 would require. I just found out that if I choose "None" as scaling, there is no error, and the generation of the DVD is much, much faster.
A DVD with a slide show containing two slides and a 4 second transition takes about 3 minutes to generate when the scaling is set to something other than "None". Without scaling it takes approx. 14 seconds. The resulting movies size is the same (5,35 MB).
I wonder why the time differs so much. Obviously the images have to be scaled to the target size. But it seems that the images are not scaled only once, that those scaled versions of the source images are cached, and those cached versions are used to generate then blend effect, but for every frame the source images seem to be scaled again.
So I presume that the scaling - unfortunately - has an effect on the resulting movie, too, and thus influences the success of the process of DVD generation.
basic situation:
good image > 4 secs blend > bad image => error
variations:
other blend times don't cause an error:
good image > 2 secs blend > bad image => success
good image > 8 secs blend > bad image => success
other transitions cause an error, too:
good image > 4 secs fade to black > bad image => error
good image > 4 secs page turn > bad image => error
changing the image order prevents the error:
bad image > 4 secs blend > good image => success
changing the format of the bad image to TIFF doesn't prevent the error.
changing colors/brightness of the bad image: a drastic change prevents the error. I adjusted the histogram and made everything much lighter.
Just a gamma correction with values between 1.2 and 2.0 didn't help.
changing the image size prevents the error. I decreased the size. The resulting image was still bigger than the monitor area, thus it still had to be scaled a bit by Encore DVD, but with this smaller version the error didn't occur. The original image is approx. 2000 px x 1400 px. Decreasing the size by 50% helped. Less scaling (I tried 90%, 80%, 70% and 60%, too) didn't help.
using a slightly blurred version (gaussian blur, 2 px, in Photoshop CS) of the bad image prevents the error.
My guess is that the error depends on rather subtle image properties. The blur doesn't change the images average brightness, the balance of colors or the size of the image, but still the error was gone afterwards.
The problem is that I will work with slide shows that contain more images than two. It would be too time consuming to try to generate the DVD over and over again, look at which slide an error occurs, change that slide, and then generate again. Even the testing I am doing right now already "ate" a couple of days of my working time.
Only thing I can do is to use a two image slide show and test image couple after image couple. If n is the number of images, I will spend (n - 1) times 3 minutes (which is the average time to create a two slides slide how with a blend). But of course I will try to prepare the images and make them as big as the monitor resolution, so Encore DVD doesn't have to scale the images any more. That'll make the whole generation process much shorter.
If I use JPGs or TIFFs, the pixel aspect ratio is not preserved when the image is imported. I scaled one of the images in Photoshop, using a modified menu file that was installed with Encore DVD, because it already has the correct size for PAL, the pixel aspect ratio and the guides for the save areas. I saved the image as TIFF and as PSD and imported both into Encore DVD. The TIFF is rendered with a 1:1 pixel aspect ratio and NOT with the D1/DV PAL aspect ration that is stored in the TIFF. Thus the image gets narrowed and isn't displayed the way I wanted it any more. Only the PSD looks correct. But I think I saw this already in another thread...
I cannot really understand why the MPEG encoding engine would produce bit rates that are illegal and that are not accepted afterwards, when Encore DVD is putting together all the stuff. Why is the MPEG encoding engine itself not throwing an error during the encoding process? This would save the developer so much time. Instead they have to wait until the end, thinking everything went right, and find out then that there was a problem.
Still, if sometime somebody finds out more about the whole matter I would be glad about further explanations.
Best regards,
Christian

Another Data Rate Too High Error Question

Hi all,
I have seen quite a few posts about pgc errors, but most of them deal with slideshows and not video; and I can't find anything with the REF=KApgc error.
I'm just putting all of my home movies onto an authored DVD, not rocket science. I'm using the 'Film Submenu' preset with only 5 main movies, things like Easter, Birthday, etc. My transition for each button is a slate (for lack of a better word) that says exactly what it is and when it happened, before each movie plays.
After I had everything set up, I realized I didn't have an ability to "play all" that would include these slates. Simple solution, make a 'play all' button that links to a timeline that has everything in it - the slate, then the movie, next slate, next movie and so on. (When I say movie - they are all .mov files rendered out from After Effects, even the slates)
My transcode settings are NTSC DV High Quality 7mb VBR 2 Pass and the "maximum quality" box is checked.
When I run the 'Check Disc' all is fine. Preview the disc, all is fine.
Build Disc: Hours of Transcoding then the error: Data Rate Too High at *timecode* REF=KApgc.
When this movie is by itself with a button click, it's fine. It's only in the "play all" timeline that it produces the error.
If the data rate isn't too high in one place, why is it too high in another? It's the same thing, just a longer timeline.
Please Help!
Thanks.

Thanks Jeff,
I feel kind of silly for not thinking of that as a solution to my play all dilemma. That's why you're the expert I guess.
A better solution would be to create a playlist of all of your other timelines; that way, only one copy of each gets burned to disc.
Hopefully the "data rate" error will go away with these changes.
-Jeff
Can I place my slates that are just assets (.mov) in the playlist or can I only put timelines in there?
Thanks again,
-Jim

HT5848 What is the sampling rate and codec for iTunes Radio. Is it lossless encoded?

What is the sample rate and codec for iTunes Radio? Is it lossless encoded?

I have to agree with you. There are several forum discussions on bit rate being as high as 256 kbps but I don't see how it could be more than 96 kbps based on the poor sound quality I'm hearing. I'm comparing it to an internet radio station that is 128 kbps and sounds much better.
Am I missing something?

PCM problem - Muxer Bit Rate Too High

I'm continually receiving the error "Muxer error Bit Rate Too High." I've narrowed it down to the PCM audio that I'm using. I know many would recommend that I switch to .AC3. Unfortunately, that is not an option.
I received audio from 3 sources. From an audio post house, the quicktimes produced on my mac and the encoded PCM files from the Maestro real time mpeg encoder. The weird thing is that the PCM files from the real time encoder work fine. If I remove all the audio, but leave the PCM from Maestro...there are no issues.
I have even gone as far as outputting from FCP to dbeta and then re-encoding with Maestro and that didn't work.
Any help would be greatly appreciated.

Erik, you may be about to hate me, but I am just making sure I understand the process of elimination, you deleted all audio from all tracks and ONLY left the PCM audio on the main track and it did not build? And the same thing for each of the menus (all audio out of the project except for a menu at a time?)
1.) Not sure how you made the menus or you default preferences within DVD SP, but if the encoding rate for menus was high and it was a motion menu the spike could still happen.
2.) If the steps were as above, take a look at the build file on your computer to see where it is crashing out and/or watch the log to see what is being muxed when the projects crashes
3.) If in fact that leaving just the PCM audio in the track by itself (not the 5.1) you may want to delete preferences and the MPEG/PAR files that DVD SP creates and also repair permissions. Then take the PCM and try rexporting from Quicktime to AIF and use a different name for the file such as "SecondTry.aif" so it is clear it is the other file.
BTW which version of DVD SP are you running and which version of QT?

MUXER Bit rate too high

I am in the process of creating a PAL version of an existing NTSC DVD
I created PAL-compliant video files from iMovie.
Then, I took the existing NTSC DVDSP project, and:
- deleted the existing video files from the clips and the Assets
- Set the video standard to PAL
- Saved the DVDSP project under a new name
- Imported the PAL video files as assets and attached them to the clips.
I left the audio files as is (all AC3)
I kept the same menus (Menu1 has a PAL video as a background)
When I try to build, I get an Muxer Bit Rate too High error message right after the Auto play segment is processed (see log below)
The Autoplay segment is a slideshow made up of jpeg pictures with a "cube" transition. There are two audio streams and two subtitles streams (one in English, the other in French).
I never had that problem when burning the NTSC version. What do I need to change?
Here is the log of the build:
Building Project Tibétains bilingue PAL
01/03/07 08:45:52
Build Folder /Volumes/MAXTOR HD/PAL videos
Starting DVD Build 5TIBTAINS_BIL...
Compiler Initializing...
Precompiling Project 5TIBTAINS_BIL
Parsing Assets...
Encoding Assets...
Compiling VMG Information...
Created 13 PGCs in VTSM1
Created 13 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM3
Created 5 PGCs in VTSM3
Created 9 PGCs in VMG.
4 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Rendering Menu:Menu 1,Language:2...
Compiling Menu#2 (Menu 2)...
Rendering Menu:Menu 2,Language:1...
Rendering Menu:Menu 2,Language:2...
Compiling Menu#3 (Menu 2a)...
Rendering Menu:Menu 2a,Language:1...
Rendering Menu:Menu 2a,Language:2...
Compiling Menu#4 (Menu 1a)...
Rendering Menu:Menu 1a,Language:1...
Rendering Menu:Menu 1a,Language:2...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
Compiling Menu PGCs...
Writing VTS030.VOB
3 VTSs and 9 Titles will be created...
Compiling VTS#1 (5 Tibetains21)...
Preparing Subtitles...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (auto Play)...
Writing VTS020.VOB
Generating Transition: auto Play, Clip 1...
Generating Transition: auto Play, Clip 2...
Generating Transition: auto Play, Clip 3...
Generating Transition: auto Play, Clip 4...
Generating Transition: auto Play, Clip 5...
Generating Transition: auto Play, Clip 6...
Generating Transition: auto Play, Clip 7...
Generating Transition: auto Play, Clip 8...
Preparing Subtitles...
Muxing VTS021.VOB
Muxer Bitrate Too High
Thanks,
Pierre
Dual 1.25 G4 Mac OS X (10.3.9) DVDSP 3.3

While waiting for an answer, I tried a few things.
I solved the problem by re-doing the slideshow for the Autoplay segment.
I believe that the issue was the fact that I had converted the slideshow into a track in the NTSC version.
That track had to be removed and re-created in the PAL version (just like any other video asset).
Hoping that this will help someone else.
Pierre

PE2 Data Rate too high

I am trying to burn a 15 minute video straight to the DVD. During the burning process (after rendering for about 10 hours) I got the following message: "The data rate of this file is too high for DVD. You must replace the file with one of a lower data rate. -PGC Info: name=, ref=Apgc, time= 00:07:44:23"
I successfully burned the same project a week ago; my only changes were adding some transitions and a few stills.
My project is video (most converted from VHS), music (ripped from CD or itunes), Audio (narrative recorded at home) and stills (almost all reduced to ~300Kb).
I am in the middle now of trying to burn to a file, but the error spooks me.
Any thoughts

Ned,
Some place, you have set the Data-rate above the DVD-spec. of 10 MB/s for ALL Assets, or have spikes above that. Now, since this is for all streams, Audio + Video, something below 8 works best. Then, if there is a momentary spike, it falls below the threshold of 10. In your Export settings, this has been set to high, either by you, or the program. PE is pretty smart about spikes, but can get fooled by the Assets, sometimes.
Check your output settings. I find that a setting of ~7 max. is better for player compatibility, though PE does allow one to go to 8 max.
Hunt

Why do I get data rate too high error after capture and save? (using AJA Kona)

I record(capture) about an 70 min program with Adobe premiere CS5 once a week. About a year ago I got the error *data rate too high" when stopping "capture" when saving program to Video HD(2TB). The video recorded was OK but after about 15 min the audio was out of sync and garbled. I thought I had found the problem by defragging the video drive. I have not had any problems for about 50 weeks.. until this week-it happened again. I know the video drive(2TB) was defragged and only half full. I was able to recover the program since I back up the program on a DVD but had to go through a lot of problems massaging it since I send the program to a local ABC broadcast station in 16/9 SD and the DVD is rescored in 4/3 .
I have the CS5 program on a separate 2.5 GB drive. I am running Win7pro and have a RAID series of Intel Xeon ES410 processors.
Any help as to why I get this "Data Rate too High" when saving program would be appreciated.
Thanks much!

I have three Mitsubishi broadcast quality cameras (two HD -waiting on money for switcher and 3rd HDcamera). They feed to their camera control untints and then to a switcher and then into video computer and the C5S. I probably am not answering your question. I can access the computers from my home(I also have a CG computer). Is there some way I can tell you from the C5S program which the info you need? I have it ready to record for next week.
I know how to manipulate various functions but I do not know all the ins and outs of the Premiere settings-an IT man set those up for me two years and he is no longer available.
Thanks

ORA-25307: Enqueue rate too high

dba_queue_schedules;
SCHEMA   |QNAME      |DESTINATION     |SCHEDULE_DISABLED|FAILURES|LAST_ERROR_MSG
STRMADMIN|CAPT_SRC |target.domain.COM |N                |0       |ORA-25307: Enqueue rate too high, flow control enabled
STRMADMIN|CAPT_SRC |target.domain.COM |N                |0       |ORA-25307: Enqueue rate too high, flow control enabledV$BUFFERED_PUBLISHERS;
QUEUE_SCHEMA|QUEUE_NAME |UNBROWSED_MSGS|OVERSPILLED_MSGS|MEMORY_USAGE|PUBLISHER_STATE
STRMADMIN   |CAPT_SRC      |15043         |0               |30          |IN FLOW CONTROL: TOO MANY UNBROWSED MESSAGESV$BUFFERED_SUBSCRIBERS;
SUBSCRIBER NAME|CNUM_MSGS|TOTAL_DEQUEUED_MSG|TOTAL_SPILLED_MSG
               |20401    |0                 |0
APP_SRC        |0        |0                 |0Anyone pls? whats wrong? is this normal to have a blank subscriber name win cnum_msgs 20401?
Edited by: user13640691 on May 11, 2011 9:38 PM

Sound like you have a propagation problem. Let's check it. I expect to see figures in propagation sender but nothing into receiver or reader.
-- Propagation senders : to run on source site
prompt
prompt ++ EVENTS AND BYTES PROPAGATED FOR EACH PROPAGATION++
prompt
COLUMN Elapsed_propagation_TIME HEADING 'Elapsed |Propagation Time|(Seconds)' FORMAT 9999999999999999
COLUMN TOTAL_NUMBER HEADING 'Total Events|Propagated' FORMAT 9999999999999999
COLUMN SCHEDULE_STATUS HEADING 'Schedule|Status'
column elapsed_dequeue_time HEADING 'Total Dequeue|Time (Secs)'
column elapsed_propagation_time HEADING 'Total Propagation|Time (Secs)' justify c
column elapsed_pickle_time HEADING 'Total Pickle| Time(Secs)' justify c
column total_time HEADING 'Elapsed|Pickle Time|(Seconds)' justify c
column high_water_mark HEADING 'High|Water|Mark'
column acknowledgement HEADING 'Target |Ack'
prompt pickle : Pickling is the action of building the messages, wrap the LCR before enqueuing
prompt
set linesize 150
SELECT p.propagation_name,q.message_delivery_mode queue_type, DECODE(p.STATUS,
                'DISABLED', 'Disabled', 'ENABLED', 'Enabled') SCHEDULE_STATUS, q.instance,
                q.total_number TOTAL_NUMBER, q.TOTAL_BYTES/1048576 total_bytes,
                q.elapsed_dequeue_time/100 elapsed_dequeue_time, q.elapsed_pickle_time/100 elapsed_pickle_time,
                q.total_time/100 elapsed_propagation_time
FROM DBA_PROPAGATION p, dba_queue_schedules q
        WHERE   p.DESTINATION_DBLINK = NVL(REGEXP_SUBSTR(q.destination, '[^@]+', 1, 2), q.destination)
AND q.SCHEMA = p.SOURCE_QUEUE_OWNER
AND q.QNAME = p.SOURCE_QUEUE_NAME
order by q.message_delivery_mode, p.propagation_name;
-- propagation receiver : to run on target site
COLUMN SRC_QUEUE_NAME HEADING 'Source|Queue|Name' FORMAT A20
COLUMN DST_QUEUE_NAME HEADING 'Target|Queue|Name' FORMAT A20
COLUMN SRC_DBNAME HEADING 'Source|Database' FORMAT A15
COLUMN ELAPSED_UNPICKLE_TIME HEADING 'Unpickle|Time' FORMAT 99999999.99
COLUMN ELAPSED_RULE_TIME HEADING 'Rule|Evaluation|Time' FORMAT 99999999.99
COLUMN ELAPSED_ENQUEUE_TIME HEADING 'Enqueue|Time' FORMAT 99999999.99
SELECT SRC_QUEUE_NAME,
       SRC_DBNAME,DST_QUEUE_NAME,
       (ELAPSED_UNPICKLE_TIME / 100) ELAPSED_UNPICKLE_TIME,
       (ELAPSED_RULE_TIME / 100) ELAPSED_RULE_TIME,
       (ELAPSED_ENQUEUE_TIME / 100) ELAPSED_ENQUEUE_TIME, TOTAL_MSGS,HIGH_WATER_MARK
FROM V$PROPAGATION_RECEIVER;
-- Apply reader : run on target system
col rsid format 99999 head "Reader|Sid" justify c
COLUMN CREATION HEADING 'Message|Creation time' FORMAT A17 justify c
COLUMN LATENCY HEADING 'Latency|in|Seconds' FORMAT 9999999
col deqt format A15 head "Last|Dequeue Time" justify c
COLUMN DEQUEUED_MESSAGE_NUMBER HEADING 'Last dequeued|scn ' FORMAT 999999999999 justify c
SELECT APPLY_NAME, sid rsid , (DEQUEUE_TIME-DEQUEUED_MESSAGE_CREATE_TIME)*86400 LATENCY,
        TO_CHAR(DEQUEUED_MESSAGE_CREATE_TIME,'HH24:MI:SS MM/DD') CREATION, TO_CHAR(DEQUEUE_TIME,'HH24:MI:SS MM/DD') deqt,
        DEQUEUED_MESSAGE_NUMBER FROM V$STREAMS_APPLY_READER;

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.

I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade

Hi Guru,
I' am doing prepare : upgrade from R/3 entrerprise 47X100 to ECC6.0 SR3.
PREPARE
02)                       Initialization     failed        yes
the checks.log report the following error :
SAPup> WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this
upgrade (> 2005_1_700).
                To avoid loss of data it is necessary to include the latest avai
lable version for the Add-on
                in the IS_SELECT phase.
                Please refer to Add-on note 69455 for further information.
I can't go on , How can I include the add-on in the upgrade ? the phase for include the add-on upgrade is 04) Extension   but i cannot skip phase 2    ? ! ? !
OSS note 69455 does not contain valid information.
thank's for the answer.
Regards Antonio.

Hi
I got the same error and it actually prevents from getting further, because its treated as an error.
"ERROR: To be able to use ASU Toolbox, your system requires at
       least Support Package Level 8 for the ST-PI software component
       For more information, see the upgrade documentation
WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade (> 2005_1_700).
         To avoid loss of data it is necessary to include the latest available version for the Add-on
         in the IS_SELECT phase.
         Please refer to Add-on note 69455 for further information."
2008_1_620 does not have a level 8, so it must be refering to the 2005 version of ST-PI.
Update SAPup.exe (in <upgrade dir>/bin) to newest version.
Regards
Kim
Edited by: Kim Hynek on Mar 30, 2010 11:36 AM
Edited by: Kim Hynek on Mar 30, 2010 11:40 AM

Dvd studio says bit rate too high

I have created a video from motion and used compressor, best quality 90 min, my audio is ac3 dvd studio says bit rate too high, any ideas?

It's probably telling you the truth. If the only thing on your track is a single video assett and a single audio assett, try the 120 min setting or manually reduce the avg & max bitrate in the inspector.
~D

Sample rate too high for swf or PowerPoint export

Similar Messages

Maybe you are looking for