Sample Sales Content Guide for OBIEE11g

Hi,
For OBIEE 10g we had a Sample Sales Content Guide document based on which we could practice and recreate the repository, dashboards etc. Can we find out any similar document for OBIEE11g ?

Hi Balaa,
The link provided contains various guides like user guides , admin guides etc.
But what i was looking was there was a sample sales content guide which was given in the following link, but it was only for OBIEE10g. Do we have similar to that in OBIEE11g ?
http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html

Similar Messages

Portal Content Guide for understanding the MDM Configuration.

hi friends,
I need Portal Content Guide for understanding the MDM Configuration pdf file..
please send that file in pdf format
thanks
ramu

Hi,
You can access the below link.
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c87d0243e56f75e10000000a1553f6/frameset.htm]
Regards,
Jitesh Talreja

OBIEE - Documentation or tutorial for the Sample Sales example

HI,
Do we have any documents or tutorials for the sample sales example that comes with the OBIEE installation.
I have completed the Oracle By Example trainings. Now I am exploring the Sample Sales rpd and am finding it difficult to understand the different mappings and their functional implications as well as the steps to create them.
So I was wondering if there are any documents which explains the sample sales example. I am using OBIEE 10g.
Thanks for your help.
Regards,
Anand

Hi Anand,
Check the 'Sample Sales Content Guide'on; http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Finding Sales Analytics Content Guide

Hi All,
I am trying to find Sales Analytics Content Guide to see the reports we would get out of the box.
Can someone suggest me where to find it
Thanks
Rahul

Hi Rahul,
Check "My Oracle Support" for DocId; 832690.1.
This is the 'Oracle® Business Intelligence Applications Content Guide Release 7.9.6,7.9.6.1' and should give you all the info you need.
Cheers,
Daan Bakboord
http://obibb.wordpress.com

Sales Analytics Content Guide

Hi All,
I am trying to find Sales Analytics Content Guide to see the reports we would get out of the box.
Can someone suggest me where to find it
Thanks
Rahul

Below is the link.
You need metalink (aka. oracle support) login for this.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=846917.1

Creation of Excise Invoice for Sample Sales

Hi Gurus,
When i create excise invoice for sample sales against the invoice the excise duties are not capturing it is showing as zero value. Can you give suggestions to solve this.
Regards
Kiran

If the excise values flowing in billing document but not in excise document, then you need to check in the following IMG
Logistics-General --> Tax on Goods Movements --> India --> Account Determination.
There you have to maintain the respective G/L accounts for excise and also in the next tab you have to specify the G/L Accounts per Excise Transaction.
For information, for outgoing excise invoice, the excise transaction type would be DLFC.
thanks
G. Lakshmipathi

GUID for relation between BP and Sales Org?

Hi,
I need a GUID for the relation between a business partner and the sales org. I already have a GUID for the sales org, and one for the BP, but I also need one for the relation itself in addition to the field RelNr in BUT050.
What table are these stored in?
Regards
Thomas

Hello Manuel,
in neither of these tables is a field for a GUID for the relation, there is only one GUID for the business partner set.
Since my GUID does not really need to be globally unique, but rather locally, I will now use the FM BUPA_MWXT_RELKEY_TO_RELGUID (which basically concats both partner numbers and the partner relationship number).
Thanks for your help, though.
Thomas

Looking for Implementation Guide for Sales and Distribution

From where can I download "Implementation Guide" for Sales and Distribution or can anybody mail me the guide?
Thanks in advance for the answers.

HI
REFER BELOW LINK DOWNLOAD
<a href="http://sapbrainsonline.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html">SD (Sales and Distribution) Tutorials</a>
<a href="http://www.esnips.com/_t_/SAP+SD">SAP SD</a>

Configuration guide for BW , Business content

Where can I find a step by step configuration guide for BW specifically for Business contents
I would also like to know what steps are to be done in R/3 also.
If you could give me a link for configuration guide like what we get in Best Practices for R/3 MM or SD, I would be extremely grateful.
I am trying to find it for last 5 days but could not get it.
Pls help..

Hi Sandeep
SAP_BW 700 9 SAPKW70009 SAP NetWeaver BI 7.0

System Content Copy Guide For 2004s

Hi,
Can any one help me out how to perform System Content Copy for netweaver 2004s From Oracle 10.2 database ,windows 2003 servers to MaxDB 7.0,windows 2003 sever.
Thanks
Venu

this is not a system copy, this is migration
follow https://websmp102.sap-ag.de/osdbmigration
Cheers,
-Sunil

Edit GUID for Group? ACLs from old server no good

Hi, we're trying to upgrade from an old server running OSX Server 10.4.11 to a new Mac Mini running Lion Server. Our 'hopes & dreams' were to be able to keep everything the same so we could just switch over and keep working with no interuption.
Our needs are pretty basic, with only using 6-8 local user accounts (no network accounts), 2-3 main groups, and mostly file sharing and VPN.
So I tried to setup the users and groups with the same long names, shortnames, passwords and UID/GIDs as our old server. Then for our main old shared files drive, we cloned the entire contents to our new RAID drive using SuperDuper, making sure to check 'retain ACLs'. We were 'hoping' to retain all of the ACLs so we wouldn't have to reapply them to thousands and thousands of files/folders. Even with only a couple groups and not too many ACLs, it would still be a pain.
Unfortunately, when I examing the permissions for files & folders on the new drive, instead of the group short names for the ACE's it is listing a long number which I believe is a GUID?!? (instead of the group name 'sales' it might say 'A4688EB67-6478-AADE-AA97-006545897979' for the User or Group). But the actual ACE's applied are correct, so those did in fact stay intact.
- So am I understanding correctly that setting the same GIDs for the groups was not enough, there was a hidden 'GUID' that I was not aware of that is now out-of-sync?
- If so, is there any way to edit this number for a group so that the ACLs will find the proper groups again?
- If THIS is possible, how would I find the GUIDs for the old groups in Tiger Server so I could port them over???
- Any other options other than resetting all of the ACLs from scratch???
THANKS!

Sorry, was easier than I thought. Just haven't worked on the server in a while.
If it helps anyone for whom this isn't obvious, I exported the users & groups from the Tiger server using Workgroup Manager, then imported them into our Lion Server. This brings all the proper GUIDs with it and now all of our ACLs look correct.
Note to self: somtimes the easy method actually works (with all the differences, I wouldn't have been certain the Tiger users could be imported directly in).

Student Guide for Dev/2000 Build Forms II.

Does anyone know if/how I can purchase the Oracle University Student Guide for Dev/2000 Build Forms II.
I've gone out to the Oracle site and found a product (A80607) but I'm not sure if this is what I'm looking for.
I called Oracle and was told to call a different number twice and I ended up with a prerecorded msg.
Any help would be appreciated.
Thanks
Jim M
null

Oracle Forms is used by many companies who are using the Oracle Database and are looking for a fast and easy solution for application development based on the PL/SQL language. There are a lot of those around (You can find some samples at http://www.oracle.com/ip/develop/ids/customers/index.html?content.html )
Oracle Forms is also used for the development of parts of the Oracle e-business suite, so any organization that has this suite (again thousands of those) and wants to do customization is using Oracle Forms too.

Could you Please Send me the Step by Step guide for the BADI

Hi ABAPers,
Could you Please Send me the Step by Step guide for the BADI.It is very Urgent
Thanks & Regards,
Ashok.

Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction .
YOu can go through these links...
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
just refer to the link below. it will of great help to u.
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
(SAP link- ultimate material )
suppose your working for XK01 then for that the BADI being VENDOR_ADD_DATA then this implemetation procedure.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. VENDOR_ADD_DATAand press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_VENDOR_ADD_DATA
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. VENDOR_ADD_DATA) and double click on the method name
for example within VENDOR_ADD_DATA contract is a method
8. When changes have been made activate the implementation
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
IF l_s_eban-estkz NE 'B'.
CLEAR v_mtart.
SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
ENDIF.
ENDIF.
IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
IF l_s_eban-knttp NE 'A'.
IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Reward if it helps..

CIN Config Guide for MM

Hello Gurus,
Can any one provide me the Best Practice Config guide for CIN.
Thanks N Regards,
Venu M Gannu
SAP MM Consultant

Dear Venu
You can get material from forum itself for your information
Please find some details mention below:
What is CIN?
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenariou2019s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
u2022 JINFAC (Sales from manufacturing plants)
u2022 JINEXP (Export sales)
u2022 JINDEP (Sales from depots)
u2022 JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
u2022 Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
u2022 For each excise registration in your business create a registration ID, and state:
u2022 Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
u2022 The maximum number of items to be printed on each excise invoice
u2022 Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
u2022 You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
u2022 Specify whether it is a manufacturing site or a depot.
u2022 Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
u2022 Number of goods receipt per excise invoice.
u2022 Multiple GR for one excise invoice, Single credit
u2022 Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
u2022 GR Per Excise Invoice
u2022 Multiple GR for one excise invoice , Multiple credit
u2022 Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
u2022 Blocked stock
u2022 Stock transport order
u2022 Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
u2022 Define excise series groups based on type of outgoing document
u2022 Assign series group to excise registration ID
u2022 If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
u2022 If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
u2022 No account postings for CENVAT in sales cycle
u2022 No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
u2022 If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
u2022 If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
u2022 Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
u2022 Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
u2022 Specify the conditions in the sales order that are used for excise rates.
u2022 Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics u2013 General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and u2026-> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
u2022 Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
u2022 Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type u2013 for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
u2022 Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
u2022 Material master data
Each material is assigned a chapter ID.
u2022 Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Letu2019s assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
u2022 Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
u2022 Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
u2022 For taxes on purchases, use the condition types contained in the tax procedure.
u2022 For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
u2022 Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
u2022 VS1 (basic excise duty)
u2022 VS2 (additional excise duty)
u2022 VS3 (special excise duty)
u2022 VS5 (sales tax setoff)
u2022 MWS (central sales tax)
u2022 MW3 (local sales tax)
u2022 ESA (service tax)
u2022 ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
u2022 Excise TT DC ind Account name
u2022 GRPO CR CENVAT clearing account
u2022 GRPO CR RG 23 BED account
u2022 GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
u2022 Excise group
u2022 Company code
u2022 Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
u2022 Defined the G/L accounts
u2022 Defined the excise groups
u2022 Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
u2022 Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is u201CForeign Trade: Import Datau201D. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 u2013 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
u2013 Import, Excise related sub screen appears.
***CIN CONFUGURATION***
1.1 Maintain Excise Registration
SPRO BasicSAP Ref. IMG Maintain Logistics general  tax on Goods MovementsIndia setting Excise Registrations
APPLICABLE
1.2 Maintain Company Code Settings
SPRO Maintain Company Code SAP Ref. IMG  Logistics general tax on Goods Movements SettingsIndia Basic setting
APPLICABLE
1.3 Maintain Plant Settings
 tax on Goods MovementsIndia  Basic setting SPRO SAP Ref. IMG Maintain Plant SettingsLogistics general
APPLICABLE
1.4 Maintain Excise Groups
 Logistics general  tax on Goods MovementsIndia SPRO Basic setting Maintain Excise GroupsSAP Ref. IMG
APPLICABLE
1.5 Maintain Series Groups
SAP Ref. Logistics general  tax on Goods MovementsIndia  Basic settingSPRO Maintain Series GroupsIMG
APPLICABLE
1.6 Maintain Excise Duty Indicators
SAP Ref. Logistics general tax on Goods MovementsIndia  Basic setting SPRO Maintain Excise DutyIMG Indicators
APPLICABLE
1.7 Maintain Sub transaction Type with Text
SPRO SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic settingMaintain Sub transaction Type with Text
APPLICABLE
1.8 Determination of Excise Duty
SPRO SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  Determination of Excise DutySelect Tax Calculation Procedure
APPLICABLE
1.9 Maintain Excise Defaults
SPROSAP Ref. IMG Logistics general  tax on Goods MovementsIndia Determination of Excise DutyMaintain Excise Defaults
APPLICABLE
1.10 Condition-Based Excise Determination
SPRO Define Tax SAP Ref. IMG  Logistics general tax on Goods Movements PurchasingIndia  Condition-Based Excise DeterminationCode for Documents
APPLICABLE
1.11 Condition-Based Excise Determination
tax SPRO Assign Tax Code to SAP Ref. IMG  Logistics general on Goods Movements CompanyIndia Condition-Based Excise Determination Codes
APPLICABLE
1.12 Classify Condition Types
SPROSAP Ref. IMG Logistics general  tax on Goods MovementsIndia Condition-Based Excise DeterminationClassify Condition Types
APPLICABLE
1.13 Maintain Chapter IDs
SPRO Maintain SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  Master dataChapter ids
APPLICABLE
1.14 Assign Users to Material Master Screen Sequence for Excise Duty
MasterSPRO  SAP Ref. IMG Assign Logistics general  tax on Goods MovementsIndia data Users to Material Master Screen Sequence for Excise Duty
APPLICABLE
1.15 Specify Excise Accounts per Excise Transaction
SPRO Specify SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  Account determinationExcise Accounts per Excise Transaction
APPLICABLE
1.16 Specify G/L Accounts per Excise Transaction
SPRO Specify G/L SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  Account determinationAccounts per Excise Transaction
APPLICABLE
1.17 Incoming Excise Invoices
SPROSAP Ref. IMG Incoming Logistics general  tax on Goods MovementsIndia Business TransactionsExcise Invoices
APPLICABLE
1.18 Define Processing Modes Per Transaction
SPRO Define Processing SAP Ref. IMG  Logistics general  tax on Goods Movements PerIndia  Business TransactionsModes Transaction
APPLICABLE
1.19 Define Reference Documents Per Transaction
SPRO Define Reference SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  Business TransactionsDocuments Per Transaction
APPLICABLE
1.20 Maintain Rejection Codes
SPROSAP Ref. IMG Maintain Logistics general  tax on Goods MovementsIndia Business TransactionsRejection Codes
APPLICABLE
1.21 Specify Which Movement Types Involve Excise Invoices
SPRO Specify Which SAP Ref. IMG Logistics general Movement Types tax on Goods MovementsIndia Business Transactions Involve Excise Invoices
APPLICABLE
1.22 Outgoing Excise Invoices
Outgoing ExciseSPRO Assign SAP Ref. IMG  Logistics general tax on Goods Movements Billing Types to DeliveryIndia  Business TransactionsInvoices Types
APPLICABLE
1.23 Maintain Default Excise Groups and Series Groups
 Outgoing Excise Invoices SPRO  SAP Ref. IMG  Logistics general  tax on Goods Movements Maintain Default ExciseIndia Business Transactions Groups and Series Groups
APPLICABLE
1.24 Subcontracting Attributes
SPRO Subcontracting SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  Business TransactionsSubcontracting Attributes
APPLICABLE
1.25 Maintain Movement Type Groups
SPRO SAP Ref. IMG Logistics general  tax on Goods MovementsIndia Business Transactions Attributes SubcontractingSubcontracting
APPLICABLE
1.26 Utilization Determination
 tax on Goods MovementsIndia SPRO BusinessSAP Transactions UtilizationRef. IMG UtilizationLogistics general Determination
APPLICABLE
1.27 Specify SAP script Forms
tax on GoodsIndia SPRO Business ExciseSAP Ref. IMG Specify SAP script Logistics general Movements Transactions FormsRegisters
APPLICABLE
1.28 Number Ranges
SAP Logistics general tax on Goods MovementsIndia  ToolsSPRO NumberRef. IMG Ranges
APPLICABLE
1.29 Message Control
SPRO SAP Ref. IMG  Logistics general tax on Goods MovementsIndia  ToolsMessage Control
APPLICABLE
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challan
J1IFR
List subcontracting challan
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
Regds
shailesh

Is there a way to create a plan guide for this query?

How can i create a plan guide for this query，suppose i can't change the query text:
USE AdventureWorks2008R2;
GO
SET NOCOUNT ON;
GO
-- query plan statement starts
DECLARE @Group nvarchar(50), @Sales money;
SET @Group = N'North America';
SET @Sales = 2000000;
SET NOCOUNT OFF;
SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;
-- query plan statement ends
AdventureWorks2008R2's parameterization option is simple, i want this type of query can reuse plan:
DECLARE @Group nvarchar(50), @Sales money;
SET @Group = N'Other Country';
SET @Sales = 88;
SET NOCOUNT OFF;
SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;
I tried many times ,but it didn't work:
declare @xml nvarchar(max) -- the plan i want to reuse
set @xml = (select cast (query_plan as nvarchar(max))
from sys.dm_exec_query_plan (0x060006001464570B405D92620200000001000000000000000000000000000000000000000000000000000000))
-- create plan guide
exec sp_create_plan_guide
@name ='Test'
,@stmt=N'SELECT FirstName, LastName, SalesYTD
FROM Sales.vSalesPerson
WHERE TerritoryGroup = @Group and SalesYTD >= @Sales;'
,@type =N'sql'
,@params =N'@Group nvarchar(50), @Sales money'
,@hints = @xml;
Thanks.

I guess you don't wanna fire these queries "adhoc" but prepared instead to reuse the plan:
exec sp_executesql N'SELECT FirstName, LastName, SalesYTD FROM Sales.vSalesPerson WHERE TerritoryGroup = @Group and SalesYTD >= @Sales',
N'@Group nvarchar(50), @Sales money', N'Other Country',88
exec sp_executesql N'SELECT FirstName, LastName, SalesYTD FROM Sales.vSalesPerson WHERE TerritoryGroup = @Group and SalesYTD >= @Sales',
N'@Group nvarchar(50), @Sales money', N'North America',2000000
Bodo Michael Danitz - MCT, MCITP - free consultant - performance specialist - www.sql-server.de

Sample Sales Content Guide for OBIEE11g

Similar Messages

Maybe you are looking for