Sample size does'not appear in QA02 of created Inspection lot Number.

Hi Experts,
I have created a production order of a material and its Inspection lot is automatically created but the inspection lot created does'not have sample size from the stock as a result I am unable to perform result recording of a inspection lot.
Please correct me if i am wrong.
Thanks
Saurabh

Dear Saurabh Mishra.
Kumar & Barjatya's said is right. and more you can consider for solve this problem as below step;
- You must change the sampling procedure in the inspection plan. After you have reset the sample
in QAC3
    1. First you must change the sampling procedure to fixed sample (assuming you have 100%
        inspection at present) in QDV2 or
        create a new sampling procedure (as Naik remarked) with fixed sample in QDV1
    2. Then assign the changed sampling procedure in the inspection plan through QP02
    3. Then assign a sample quantity in the inspection plan in the same transaction (QP02) for the
        inspection characteristic to be inspected
    4. Save the inspection plan, and run QA02 where you re-assign the updated inspection plan and
       re-do sample calculation.
       For GR based lot i have already stated what has to be done. In case of an inspection lot caused
       due to the GR from a process or purchase order, cancel the GR. The inspection lot is also
       cancelled. Then follow steps 1 to 3. In the 4th step after saving the inspection plan, simply do the
       GR again, It should work out.
Regards,
Jeong, Yeong-Chul

Similar Messages

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Forms 10.1.2.0.2: Web Form does not appear at Runtime with CALL_FORM

Hello there,
We have a number of forms we're executing as web forms using Oracle JInitiator 1.3.1.22. We have one form in particular that, when a button is pressed, is supposed to call another form via the CALL_FORM built-in.
We are passing a parameter list to the new form, and executing the CALL_FORM built-in with these Setting Parameters:
CALL_FORM( formmodule_name => '<OUR_FORM_NAME>',
           display         => NO_HIDE,
           switch_menu     => NO_REPLACE,
           query_mode      => NO_QUERY_ONLY );When we run the starting form as a web form (via JInitiator 1.3.1.22), and press the button to call the other form, all buttons on the starting form are greyed-out/disabled. The called form does not appear.
I have carried out a number of checks with my own debugging tool (stored procedure writing messages to a table via an autonomous transaction), and forms focus is definitely been transferred to the called form. For example, the WHEN-NEW-FORM-INSTANCE trigger in the called form is definitely being executed.
I suspect this problem is JVM-related rather than Forms-specific. My current plan of attack is to request the Application Server Logs tomorrow morning (I don't currently have access to them) and see if I can find any Java-related error messages. However, if any of you reading this have experience of this type of problem and can offer any assistance, please don't hesitate to let me know your suggestions/advice.
Cheers.
James

You could check the settings of the window in the calling form. If its set to "Modal" or "Dialog", and the window in the called form has other settings, the new window might be opened "behind" the old window.

Edu Version does not appear in order history

Hello,
I'm Stephanie and I ordered the educational version of the creative cloud for students, but it does not appear in my order history or somewhere else.
I don't have uploaded any proof of my educational status as a student, could this be the problem? I tried, but I don't have an order number.
please help me
Yours Sincerly
Stephanie
P.S.
there also came no confirmation email for the purchase, just the verify email for the email adress

Hello Ankit,
I placed my order yesterday on www.adobe.com <http://www.adobe.com> , I assume that my credit card isn’t charged yet.
Could it be possible that my order didn’t gone thru?
Yours Sincerely
Stephanie
Von: Ankit Khurana [email protected]
Gesendet: Dienstag, 4. Juni 2013 20:23
An: Virusmood
Betreff: Edu Version does not appear in order history
Re: Edu Version does not appear in order history
created by Ankit Khurana <http://forums.adobe.com/people/Ankkhura%40adobe.com> in Adobe Creative Cloud - View the full discussion <http://forums.adobe.com/message/5378898#5378898

Font size button does not appear when I read imported PDF books (in ibooks)

I imported several books in PDF forman in my iPad 2, and I can read them fine, but the Font size button (A A on the uper right corner) does not appear. I only have the brightness button (that only controls the brightness and nothing else), the Search and the Bookmark buttons. Any idea? Thanks.

Thanks King_Penguin, I suspected that this would be the case but I wanted an expert oppinion. Thanks again.

On certain sites, some lines have the lower half missing. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.

MiniTOC does not appear in translated source file

RoboHelp 8.0.2
WebHelp Output
I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
I have no clue how to resolve this issue. Sample code and screens are listed below.
Donna
English Source
<h1><a name="Top"></a>Working with Web Ordering</h1>
<p>This topic explains how to generate and maintain NAPA and Factory orders.
(Special orders and Non NAPA orders will be available in a future release).
You perform these tasks on the <span style="font-weight: bold;">Order
Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
> Web Ordering</span> from TAMS II BackOffice.</p>
<p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
</span><span>topic</span> for instructions on common functionality such
as sorting data.</p>
<?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
<p> </p>
<h2>Adding a New Order</h2>
<p>Follow these instructions to create a new purchase order:</p>
French Source
h1><a name="Top"></a>Utiliser le module de commande en ligne</h1>
<p>Cette rubrique explique comment créer et gérer des commandes NAPA et
d'envoi direct. (Les commandes spéciales seront disponibles dans une version
future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;">Gestion
des commandes</span>. Cette rubrique suppose que l'utilisateur est connecté
et que la <span style="font-weight: bold;">Gestion des commandes</span>
a été lancée à partir de la page de renvoi de TAMS II. </p>
<p>Voir : La rubrique <span style="font-weight: bold;">Survol de l'interface
Web de TAMS II</span> pour des instructions sur les fonctions courantes
comme le tri des données.</p>
<h2>Ajouter une nouvelle commande</h2>
<p>Suivre les instructions ci-dessous pour créer un nouveau bon de commande :</p>

The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

Spry menu bar does not appear over flash elements in I.E. 8

Hi, My spry menu bar does not appear over any flash elements in I.E. 8. Every other browser it workd fine. Can anyone please help? Thanks
A link to one of the pages is http://www.innervisionfilms.tv/pages/showreel.html
My spry code is
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
    font-family: Verdana;
    color: #000033;
    font-weight: bold;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 130px;
    float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
ul.MenuBarHorizontal ul li a
    width: 10.2em;
    background-color: #4E81B4;
    left: auto;
    background-image: none;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border-top-width: 0px;
    border-right-width: 0px;
    border-bottom-width: 0px;
    border-left-width: 0px;
    border-top-style: solid;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
    border-top-color: #FFFFFF;
    border-right-color: #FFFFFF;
    border-bottom-color: #FFFFFF;
    border-left-color: #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    background-color: #EEE;
    padding: 0.5em 0.75em;
    color: #000033;
    text-decoration: none;
    font-family: Verdana;
    font-size: 11px;
    background-image: url(../pagelayout/menubg.jpg);
    font-weight: bold;
    border: 1px solid #003366;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    background-color: #003366;
    color: #FFFFFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #003366;
    color: #FFFFFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(../pagelayout/menubg.jpg);
    background-repeat: repeat;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(../homepagelayout/greenbarbg.jpg);
    background-position: 95% 50%;
    background-repeat: repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

I still can't find a solution. Changing the parameter wmode:transparent works for .swf files but .flv files do not have the option to add this parameter. If you add it in the script manually it doesn't do anything. Any help would be greatly appreciated. I cn't find any solution online.
Thanks,
Adam

This file does not appear to be a photoshop file error.

Hello,
I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
Ok so here is what i did:
Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
Thanks in advance :-)

Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
Good luck, and hope that this helps,
Hunt
Here are looks at the structure, using the Library Menu Business>Clock:
The Menu in PSD with the Layers Palette Open
Same Image With Layers Flattened to Save As a JPEG
What the JPEG Looks Like As a Flattened JPEG
The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
Message was edited by: Bill Hunt - Added graphics

This file does not appear to be a Photoshop file - Menu won't import

I was searching on the forums and found that some other people have had this problem, but I didn't see any solutions.
When I try to build my DVD from Encore, I get this error "This fiel does not appear to be a Photoshop file.
I created my menu in Photoshop CS4, imported it as a menu. When I preview in Encore it works fine?
The photoshop file is 8 bit color...should it be 16? I tried that to, but it doesn't seem to change anything?
Any help is greatly appreciated!!!

The 2 bit image object that shows up to the right of the buttons on the highlighted state still was a little too crisp, but
I'm going to try a little vertical blur like you said to see what happens.
Well, the Vertical Blur will not work there. The Sub-picture Highlights cannot have any Styles, or Filters added to them. What I do to "simulate" a "glow" is to to create a second Sub-picture Highligh, in the next Layer down (in the same Button Layer Set)t, ever so slightly larger. I then set it's Transparency in Encore to be about 50%-30% of what the "original" Sub-picture Highlight's Transparency was. You can also assign another number from the Menu Color Set (this is done in PS), and then adjust that number's value in Encore to be a shade lighter of the original Sub-picture Highlight's. You will end up with maybe a 2 and a 3, and need to pick those colors from a Custom Color Set in Encore - cannot be done in PS, at least through CS3 and I do not believe in CS4 either. That might bear checking out, with someone like Jeff Bellune, or Jbowden. See this LINK for some tips, and this one for the full ARTICLE. The link to the version posted on Adobe has been lost, with the changeover in the forum. You can post and read at Muvipix.com, without a subscription, or even the free signup. Because of the wealth of Functional Content, stock music and Menus, etc., you might want to spend a bit of time poking around there.
Though most of the article and discussion revolve around removing part of the Sub-picture Highlight, the final steps are for adding what appears to be a Blur. Remember, you only have ON, OFF, COLOR (limited to 4, including the background) and TRANSPARENCY, for each pixel in a Sub-picture Highlight. That's why you cannot have Styles, or similar. You have to create the illusion.
Also, I created my lower third in Photoshop and saved out a .PNG file to import into Premiere.
When I play the DVD, there seems to be some noise in the title. Do you think that's because of how
I saved the video out or because I used a .PNG?
I do not know. I have never used the PNG format. Instead, I create all of my Titles (the ones that I do outside of Titler) in PS, often using AI for shapes, that will be Rasterized in the process. I do my Titles there, and then Save_As .PSD. If I wish to animate some of the Layers, I'll Import as a Sequence, if not, I Import as Footage. I always start from the image Preset to match my Project, so frame size and PAR are right to begin with. The only reason that I can think of for using PNG is the Transparency, but PSD offers that, and so much more.
There is much that one can do with the animation of PSD Layers in PrPro. It's not as powerful, or as full-featured, as is AE, but many are surprised at how good it is.
Best news is that you are almost there, and that things looked good on the DVD. If you have any trouble following the steps for the simulated Glow in the second Sub-picture Highlight, just let me know. It's been a whle, since I wrote that, and might need to re-visit it myself.
Good luck,
Hunt

Content type problem for 'does not appear to be a proper arcive'

Hi all,
The following code will create a ZipOutputStream using ByteArrayOutputStream (not FileOutputStream) and attach the outputstream to a MIME multipart email using ByteArrayDataSource (so the file never exists physically).
It works and sends the email but the zip 'does not appear to be a valid archive' even though it looks about the right size. If I do the same and use FileOutputStream to create a physical file it works OK. I think it is an issue with the content type, or maybe this just isn't possible!
I have tried:
byteArray.toByteArray(),
byteArray.toString().getBytes() and application/zip & application/unknown.
Can anyone help or suggest an alternative way to create a 'in-memory' zip file that can then be emailed?
Many thanks
    // Specify files to be zipped
                                                             String[] filesToZip = new String[3];
                                                             filesToZip[0] = "C:\\Program Files\\NetBeans3.6\\firstfile.txt";
                                                             filesToZip[1] = "C:\\Program Files\\NetBeans3.6\\secondfile.txt";
                                                             filesToZip[2] = "C:\\Program Files\\NetBeans3.6\\thirdfile.txt";
                                                             byte[] buffer = new byte[18024];
                                                             // Specify zip file name
                                                              String zipFileName= eq_rt.getReportName() + ".zip";
                                                             try {
                                                               // Create ZipOutputStream to store the FileOutputStream
                                                               //ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFileName));
                                                               ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
                                                               ZipOutputStream out = new ZipOutputStream(byteArray);
                                                               // Set the compression ratio
                                                               out.setLevel(Deflater.DEFAULT_COMPRESSION);
                                                               // iterate through the array of files, adding each to the zip file
                                                               for (int a = 0; a < filesToZip.length; a++) {
                                                                 System.out.println(a);
//                                                                 // Associate a file input stream for the current file
                                                                 FileInputStream in = new FileInputStream(filesToZip[a]);
                                                                 // This ROCKS as it is passing a array into the text file .getBytes() seems
                                                                 // to be the KEY in getting ByteArrayInputStream to WORK
                                                                 String strSocketInput = "TAIWAN";
                                                                 ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
                                                                 //ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc() ) );
                                                                 // Add ZIP entry to output stream.
                                                                 out.putNextEntry(new ZipEntry(filesToZip[a]));
                                                                 // Transfer bytes from the current file to the ZIP file
                                                                 int len;
                                                                 while ((len = baIn.read(buffer)) > 0)
                                                                 out.write(buffer, 0, len);
                                                                 // Close the current entry
                                                                 out.closeEntry();
                                                                 // Close the current file input stream
                                                                 baIn.close();
                                                              // DataSource sourcezip = new FileDataSource(zipFileName);
                                                               //DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/octet-stream");
                                                                DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/octet-stream" );
                                                               // Create a new MIME bodypart
                                                               BodyPart attachment = new MimeBodyPart();
                                                               attachment.setDataHandler(new DataHandler(sourcezip));
                                                               attachment.setFileName(zipFileName);
                                                               /* attach the attachemnts to the mail */
                                                               multipart.addBodyPart(attachment);
                                                               // Close the ZipOutPutStream
                                                               out.close();

Many thanks Dr Clap. Moving the Closing the ZipOutputStream before I attached it to the email solved my problem.
                                      /* Close the ZipOutPutStream (very important to close the zip before you attach it to the email) Thanks DrClap */
                                                                out.close();
                                                                /* Create a datasource for email attachment */
                                                                // DataSource sourcezip = new FileDataSource(zipFileName);
                                                                DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/zip" );
                                                                /* Create a new MIME bodypart */
                                                                BodyPart attachment = new MimeBodyPart();
                                                                attachment.setDataHandler(new DataHandler(sourcezip));
                                                                attachment.setFileName(zipFileName);
                                                                /* attach the attachemnts to the mail */
                                                                multipart.addBodyPart(attachment);

This XML file does not appear to have any style information...

hello,
i am a new oracle spatial developer and also i am new in XML. i want to see the demos in oracle 10g enterprise edition. i imported the necessary dump files and i created the necessary user defined as mvdemo/mvdemo. when i want to see the demos in mapviewer, i come accross this error:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
     <oms_error>
Message:[XMLHelper] xml eÅleme isteÄi incelenirken hata.
Fri Feb 25 01:37:39 EET 2005
Severity: 0
Description:
Message:[XMLHelper] xml eÅleme isteÄinde geÃ§ersiz geometri.
Fri Feb 25 01:37:39 EET 2005
Severity: 0
Description:
Message:GML Geometry type Point not suppoted.
Description:
     at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
     at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
     at oracle.lbs.mapserver.oms.doPost(oms.java:314)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
</oms_error>
for now, i dont know what to do.. if someone recommend any useful idea, i would be greatful.
best regards..

hello,
thank you for your reply..
i made some changes and i dont see the errors that i mentioned above any more. but still some problems..
firstly, i decided to change the settings in the mapViewerConfig.xml file in order to add a new datasource. i copied it and that is the reason why you see the '!' in my explanation. the new situation in the mapViewerConfig.xml file like this:
<map_data_source name="mvdemo"
jdbc_host="c-0y5wp0jvd2bf8"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="nzKVD/KFZYkGc0uF7EL7/vPibuAPpQ9j"
jdbc_mode="thin"
number_of_mappers="3"
/>
"c-0y5wp0jvd2bf8" is my computer name. jdbc password was encrypted when i started the mapviewer. this is the new screen of the mapviewer after starting:
05/03/01 17:49:58 INFO [oracle.lbs.mapserver.oms] oms root path: C:\mapviewer10
12_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\web\
05/03/01 17:49:58 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
initialized
05/03/01 17:49:58 INFO [oracle.lbs.mapserver.core.MapperConfig] using default co
nfig file: C:\mapviewer1012_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\we
b\WEB-INF\conf\mapViewerConfig.xml
05/03/01 17:49:58 WARN [oracle.lbs.mapserver.core.MapperPool] destroying ALL map
maker instances.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Regi
on=SDOVIS_DATA.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] max_cache_size=32 MB.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_mvdemo
_jdbc:oracle:thin:@c-0y5wp0jvd2bf8:1521:orcl created in cache.
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperConfig] Map Recycling th
read started.
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.oms] *** Oracle MapViewer started.
when i open the page ( http://localhost:8888/mapviewer/ ) and press the submit button of the "sample map request" section to see the result of the demo, i come accross this error:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
     <oms_error>
Message:[XMLHelper] xml eÅleme isteÄi incelenirken hata.
Tue Mar 01 17:53:51 EET 2005
Severity: 0
Description:
Message:[XMLHelper] xml eÅleme isteÄinde geÃ§ersiz geometri.
Tue Mar 01 17:53:51 EET 2005
Severity: 0
Description:
Message:GML Geometry type Point not suppoted.
Description:
     at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
     at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
     at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
     at oracle.lbs.mapserver.oms.doPost(oms.java:314)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
</oms_error>
in addition, i use firefox as my default browser. however, i tried it in the iexplorer also but gave the same error again.
i look forward to taking a response. thank you very much for your care again.
regards

Background does not appear after applying template

CS4
template defined and saved in template folder.
when applying template to new html page, all transfers but background image does not appear, url is in code but does not find file. any ideas???
body {
background-image: url(file:///F|/projects/BBMD Projects/bbmd site v2/images/bridgelv2.jpg);
background-repeat: no-repeat;
background-color: #D2D2D2;
background-attachment: fixed;
background-position: 75px top;
height: 400px;
width: 600px;
position: inherit;
overflow: scroll;
top: auto;
left: auto;
right: inherit;
font-family: "Lucida Console", Monaco, monospace;
font-size: small;
font-style: normal;
color: #000;
border-top-style: none;
text-align: left;
vertical-align: top;
bottom: auto;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;

template defined and saved in template folder.
when applying template to new html page, all transfers but background image does not appear, url is in code but does not find file. any ideas???
If this is a new site and a newly created template, you DON'T need to 'apply' the template.
The best way to create new child pages is to :
FILE>New>Page from Template
There will be a list of any templates you've created, select the correct one and press create. Child page created :-)
Save as newpagename.html (not inside the Template folder though !)
PS; as others have pointed out, the link to the background image is incorrect it's pointing to your harddrive. Is the file within the defined site working folder?
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Vertical Scroll bar does not appear in table control

Hi ,
I have a table control with both vertical and horizontal scroll bars.
The data which comes is always more than 50 and the visible line size is 8.The vertical scroll bar
does not appear at times..but if i run the program again, it appears..
Sometimes it appears and sometimes no vertical scroll bar comes thought the data is more than the visible lines.
Any suggestions ? why is this happening?
Regards,
Sharadha

You have inserted data in the internal table and not "informed" the table control
In the PBO, use a statement like
DESCRIBE TABLE <itab> LINES <control>-lines.
Regards

Crystal 8.5 (Minimum function in the function tree does not appear to work)

HI I would greatly appreciate some help with this problem I am having.
I am creating a report in which there is a group of records printed . Within each record there could be any number of results related to that record of which I want to extract both the maximium and minimum value and print these. This bit is fine as I do this using the maximum and minimum function available within the summary function.
However with each of these max and min values calculated and printed I then want to create a footer that adds all these max and min values up. (This is not immediately possible using the 'summary function' max and min values as they are not presented on the 'Field explorer' dialog box for selection.
However I can individually using the maximum 'tree function' get the report to store these values so that I can do the calculations once I have got to the footer (as the fields defined are accessible through the field explorer. But the same minimum function does not appear to extract a result (and no I do not have zeros in the data).
Is there a known problem with the minimum function?
Is there another way of getting this data?
Thank you in advance
seyviv

Hi Debi, it would be easier for mean to demonstrate what I wnat/am doing in the report by use of data.
I have a file with a list of sample results. There may be many results for one sample. ie
Sample      Result Number      Result
98-01          1                           3
98-01          2                           5
98-01          3                           6
98-02          1                           3
98-02          2                           7
98-02          3                           9
98-03          1                           4
98-03          2                           5
98-03          3                           11
On the first page I want to see the max and min values across all samples listed for each result number. Then as a total value (once all the result numbers max and mins are displayed I want to perform a calculation on the max and min values displayed in the list (ie. max 4 + 7 -11 and for min 3 + 5 - 6)
                      Result
                      Number        Max           MIn
                      1                    4                3
                      2                    7                5
                      3                    11              6
Result of                             0                2
Calculation
I have been able to do this for the max values but the minimum function does not work.
How I currently extract this data is that I use a 'Summary field ' to calculate the max and min values in the list. However to get the data for the calculation at the bottom I use the 'Formula fields' to extract the values listed for all the results for 'result number 1, 2 & 3' and then use the 'Function tree' to get the 'Maximum value for each individual result number and then finally do a calculation on the max values. However, the same minimum function does not appear to work.
I hope this explains what my problem is.
Thank you in advance of any suggestions you may have
Regards
Viv

Sample size does'not appear in QA02 of created Inspection lot Number.

Similar Messages

Maybe you are looking for