Sample Size is Zero

Hi all,
I have created a Material (ROH) with BUOM as EA. I have created a Sampling Procedure with % Inspection and Manual Valuation.
Also I have created a MIC and assigned a Quality Plan for the same raw material.
My problem is, when I do manually create an Inspection Lot, Sample size is coming as Zero. Task List specification is properly assigned to the Inspection Lot from QP01.
As it automatically takes the Task List, Sample size is displyed as 0 and Grayed out automatically.
My client requirement is to display Sample size in each Inspection report (as per their standards). In Valuation screen (QE11/QA32), inspect qty is displayed properly as per Sampling Procedure.
Experts, please guide me.
Best Regards
Sam

Hi Hemant and Ashok,
Thnx a lot for your replies. I have set the Characteristics as Optional in QS21.
Once I have changed that to Required Characteristics in QS23, Sample size started appearing in Inspection Lot also.
But then in the Inspection Report, its appearing as Zero. How can I trace the Sample size for the optional Characteristics in Inspection Report.
Please guide
Sam

Similar Messages

Sample size '0' in inspection lot

Hi,
While we are trying to determine the sample size of the inspection lot, we use dynamic modification rules. We have been created a sampling procedure with use of sampling scheme and we assign the sampling procedure to a dynamic modification rule. Also in the characteristic level of a quality plan we have defined the sampling procedure. However, the system does not calculate the sample size in the inspection lot. We see the sample size in the characteristic level, but in the inspection lot (QA03) the system does not calculate the sample size. We see '0' as a result.
Thanks&Regards,
Begü

Hi
As per my understanding you have used sampling Procedure & Dynamic modification rule at char Level.
Here You might have applied the DMrule at the Header of Task list.
Now when you apply DMR at char level at header then it will skip all char in the task list.
your lot is skipped .so sample size becoems zero & char statuses will be 4:skipped.
This is how sap is.
Regards
Sujit

How do I find, at-a-glance, the sample size used in several music files?

How do I find, at-a-glance, the sample size used in several music files?
Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
Running 10.8.5 on an iMac i5.
I did search through a couple of communities but came up empty.
Thank you,
Craig

C-squared,
There is no View Option to allow display of a column of sample size.
For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know). For MP3 and AAC it is not available at all.
You can roughly infer it from the files that are larger than expected for their time.
99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority. However, if you want to make a suggestion to Apple, use this link:
http://www.apple.com/feedback/itunesapp.html

Can you adjust the Sample Size in LR?

In Photoshop, you can set the size of the eyedropper to sample a single pixel, 3x3 average of 9 pixels, 5x5, 11x11, etc. It can make a big difference when sampling a single pixel as opposed to the average of a larger area.
Can the sample size be set in LightRoom?
If not, what is the sample size in LR when you run your cursor over the image? Does this vary depending on the displayed magnification of the image?
Thanks,
Lou Dina

White Balance and the Color Sampler are not the same unless things have changed. White Balance is always 5x5 image pixels while the Color Sampler is 5x5 screen pixels. Therefore, one can increase the
accuracy of the color sampler by zooming in beyond 1:1. In the case of White Balance, I don’t think that’s true, again, unless that's been recently changed. Yes, kind of confusing. Bottom line though, zoom in to do precise work.

Sample Size Calculation based on the results

Dear all
I have a scenario as below
for a product the upper and lower specification is given as below
Upper spec 19.00mm
Standard 18.00mm
Lower spec 17.00mm
my client is having ranges as below
Range 1
Upper spec 19.0 to 18.75
Lower spec 17.0 to 17.25
Range 2
Upper spec 18.75 to 18.50
Lower spec 17.25 to 17.50
Range 3
Upper spec 18.50 to 18.25
Lower spec 17.50 to 17.75
Range 4
Upper spec 18.25 to 18.00
Lower spec 17.75 to 18.00
a) Initially the sample size is 50%. Starts with range 4 .
b) if consecutive 5 receipts are ok we want to switch to range 3 - sample size 25%.
c) if consecutive 5 receipts are ok we want to switch to range 2 sample size 10%
e) and range 1 sample size 5%.
f) if there is any rejection at any range, then reset to range 4.
g) if out of specification noticed then the next incoming material will be inspection in the next lowest range. ie in range 1 out of specification noticed shift to range 2 in the next Goods receipt.
I know that Sampling scheme can be used but how to link the specifications in it.
How to link this in SAP QM.
awaiting for your valuable feed back Please.
Regard
P.Srihari

Hi Sri,
As per your requirement you have to create 4 MIC as well as 4 DMR follow the below step.
1. Create MIC1,MIC2,MIC3,MIC4
2. Create DMR1,DMR2,DMR3,DMR4
3. Assign the DMR at MIC level.
a) Go to QP01 In Header data screen choose Dynamic mod. level DMR at character level. (Don't assign any DMR here)
b) In Characteristics screen assign DMR to MIC
(Range1) MIC1 - DMR1
(Range2) MIC2 - DMR2
(Range3) MIC3 - DMR3
(Range4) MIC4 - DMR4
Save the Inspection plan.
DMR detail explaination
As per your requirement MIC4 will be initially inspected (ie: range 4) and remaing MIC all are after 5 consecutive lots if any rej at any stage again inspect the Range4.
DMR1: Create 2 Stage (1st is SKIp 2nd is Inspection)
Stage1: Start with Initial stage, Tick in SKIP, and Maintain No Skip as 15 (Bcz your case You need this MIC1 after 15 lot (555)), Skip duration 999 (Bcz your case days not consider) New Stage 2 (Bcz after complete the 15 lot it will go to 2nd stage for Inspection.), Rej 1 , New Insp 1 (Bcz rejected means MIC1 is not required)
Stge:2, Insp Sev 4, Ist Enter Description as Inspection required and press enter.
In another small popup screen enter no of Inspection 5 , New Stage as 2, Rej 1, New 1,
DMR2: Create 2 Stage (1st is SKIp 2nd is Inspection)
Stage1: Start with Initial stage, Tick in SKIP, and Maintain No Skip as 10 (Bcz your case You need this MIC2 after 10 lot (5+5)), Skip duration 999 (Bcz your case days not consider) New Stage 2 (Bcz after complete the 10 lot it will go to 2nd stage for Inspection.), Rej 1 , New Insp 1 (Bcz rejected means MIC2 is not required)
Stge:2, Insp Sev 4, Ist Enter Description as Inspection required and press enter.
In another small popup screen enter no of Inspection 5 , New Stage as 1, Rej 1, New 1,
DMR3: Create 2 Stage (1st is SKIp 2nd is Inspection)
Stage1: Start with Initial stage, Tick in SKIP, and Maintain No Skip as 5 (Bcz your case You need this MIC3 after 5 lot ), Skip duration 999 (Bcz your case days not consider) New Stage 2 (Bcz after complete the 5 lot it will go to 2nd stage for Inspection.), Rej 1 , New Insp 1 (Bcz rejected means MIC3 is not required)
Stge:2, Insp Sev 4, Ist Enter Description as Inspection required and press enter.
In another small popup screen enter no of Inspection 5 , New Stage as 1, Rej 1, New 1,
DMR4: Create 2 Stage (1st is Inspection 2nd is Skip)
Stge:1, Insp Sev 4, Start with Intial stage Ist Enter Description as Inspection required and press enter.
In another small popup screen enter no of Inspection 5 , New Stage as 2, Rej 1, New 1,
Stage2: Tick in SKIP, and Maintain No Skip as 999 , Skip duration 999 (Bcz your case days not consider) New Stage 2, Rej 1 , New Insp 1 (Bcz rejected means again inspect the MIC4)
Note: Read step by step.
Revert further clarification.
Regards,
S.Babusingh

How do you find the frequency of a small sample size and a square wave.

I am collecting data from ten 12v pulses that are seperated pretty uniformly. The pulses make a square wave. I need to know how to input this small sample size and find it frequency. I need this frequency to be output in a readable file. Im not very knowledgeable in labview so if you try and help me please be very descriptive.
I know i need some sort of trigger because of uknown wait times before the sensor will be triggored but other than that im pretty lost. Any help would be appreciated.

What have you tried so far? What parts are giving you trouble? Please be as specific as possible. Post the code you have written.
You ask about frequency measurement and then you are talking about triggering.
If you always have 10 pulses, just measure the time from the beginning of the first pulse to the beginning of the last pulse. The frequency is 10/time.
Break down the problem to smaller parts. Acquire the data. Measure the frequency. Save the result to a file. Get each part working separately, then put them together.
Lynn
Sorry about duplicate post. My internet connection is very slow today.
Message Edited by johnsold on 05-31-2010 12:05 PM

Default Sample Size in ODM

The default sample size for Summary Statistic (Show Summary Single Record) is 1000 cases. We understand that we can change the default sample size at Tools --> Preferecnes --> Sampling. However, we would like to know what is the limitation on sample size/maximum cases a user can key in?
Hope someone can provide me the answer. Thank you.

I believe that you can enter as many rows as the number of rows in the data. The larger the sample size the more expensive it is to compute the stats as it needs to do more work.
Regards,
-Marcos

Does default sample size affect modeling?

when i tried to apply data contained in a table to a model, I noticed that the data table was sampled and sampled data was applied to model instead of applying all data to a model. THis is decided by Default Sample Size specified in Preferences. I wonder when we build a model, does oracle also sample part of original data and only use sampled data to build the model?
thanks

Hi,
Are you referring to using Data Miner 10.1?
If so, the Preferences, sample setting is used only for statistics gathering.
There are two ways to build or apply a model in Data Miner 10.1.
1. Using build or apply wizard.
2. Using build or apply activity.
The build activity does have a sample step but it is up to you whether to run it or not.
Neither the apply activity or apply wizard perform sampling.
Can you explain what makes you think that the apply process is sampling data?
Thanks, Mark

Default sample size?

Hi all,
what is the default sampling percentage or size for gathering statistics?
and where is this parameters stored? (how to display this value?)
thanks
andrew Kain

victoria2 wrote:
Hi all,
what is the default sampling percentage or size for gathering statistics?
and where is this parameters stored? (how to display this value?)
thanks
andrew KainIts good to mention the db version that you are referring to. With 10g, the sample size has been automated and oracle picks up the value on the fly by itself. Mention the version please before e comment.
HTH
Aman....

Does Reinit To Default set an Array size to zero?

Does the function Reinit To Default set a 2D Array size to zero? The Help is not explicit on this.
If not, what is the best way to set a 2D Array size to zero?
Solved!
Go to Solution.

Yes, it sets the size of an array to zero elements, unless the default value is defined otherwise (right click, make current value default.).
There are several ways to empty an array indicator/control.Normally I write it's value to the terminal or to a local variable. I have never used 'Reinit values to default'
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Iphoto making the photo sizes to Zero.

I've a photo library on an external harddrive (WD digital Passport drive) which is always connected to my MacPro laptop. I've been storing photos on this since 2008. When I launch iPhoto, it automatically opens the library on the external drive. Lately I have been seeing that some of the events are being shown with no thumbnail photo in iPhoto. So I further investigated and went into the file system (Originals folder) and looked into the folder. I was shocked to see the file sizes were zero . The names of the files are intact. The last modified time seems to from past. Not sure what is going on here. There are lot of files in lot of other events folders with file size zero. Not sure what happened. My understanding is that the data might be still there but the matadata is currupt. It could be something to do with the upgrade or something else I recently did. Not sure how to fix it.
Did anyone else run into this problem? Did you know the fix for this problem? Any ideas how I can recover my photos?
Thanks
EZ.

The file system is fat32.
IPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
Without a back up I'm afraid you have a bad situation.
Regards
TD

Database file sometimes gets to zero size and zero file flags

I have a problem that on my system sometimes single database file gets to a state where it has zero size and zero file flags ( as if set chmod 0 file ).
My database runs 24/7 and there are multiple agents running at the same time. My database files are backed up and removed from time to time to protect stored data. So I guess that this error could come up when two agents get to backup or recover the database file at the same time. Though, it is hard to find if it is caused by this problem, so I'd like to ask if there is anyone who stumbled on same problem - where one database ends up in state of 0 flags and 0 size.

Hello, anyone has any tip about this issue?

Inspection lot sample size is always = 1

All, I have an scenario I've seen in here but with no correct answer.
Here is the case:
(1) material has Buom = LK (link), production uom = M, unit of issue = M
(2) the Unit of Measure table in the additional Data area is :
1 LK LINK <=> 1 LK LINK
3,048 M m <=> 80,000 LK LINK
1 BOX Box <=> 80 LK LINK
(3) There is no sample procedure for this mfg item in the routing, so the production order qty should be the inspection lot sample size
(4) In the QM view of the material master, Buom is LK, Unit of issue = M, and the manual sample entries are not set
(5) For every production order released, the inspection lots for this material have a sample size of 1 M. It doesn't matter how big or small the production order qty is, sample size is always 1 M.
All other materials with uom the same in all areas, have the correct sample size equal to the production order qty.
I'm assuming this has to do with uom conversion but I can't find where the problem is.
(6) in Cuni, LK is in the AAAADL (no dimensions) option with Numerator and denominator = 1; M is in the Length option with the same numerator and denominator = 1
Please any help on this will be great.
Thanks and Regards...
Aida

Hello Aida,
Yes, This post is open for all .
Anyways, Please refer SAP Note 213505 - Sample size 1 for 100% inspection
I think, this note explains reason and solution for your query.
Amol.

What is meant by "Video Sample Size = 24 bit"?

In the video properties for a XVID file you can see "Video Sample Size 24 bit" included with bitrate, frame size, but "file size in MB or GB" omitted.
What is this Video Sample Size? Is it the same as "bit depth, also known as color depth" that relates to the number of bits used to represent the color of a single pixel in an image?
I know how to calculate/estimate the file size of a single image from bit depth information such as 12 bit, 24 bit and frame size, but can you calculate the file size of a video from it frame size, bit depth? Question is based on Video Sample Size really being equal to bit depth.

Yesterday seems to have been a bad day for the Adobe fora. I had three very similar instances of what Tony experienced. I'd be reading/posting in the Premiere CS3 forum, and when I'd hit Post, after the screen came back, I'd be in the CS2 forum, and that's where my post would appear. Similar behavior in several other Adobe fora too.
Some of the screen displays got very wonky, and I had one of those today. When I went to open an article in one of the fora, there was one reply. I posted to that, and when the screen came back, about 8 replies displayed! All were from days before, but had not shown up, until I posted.
I might have helped Tony out in the forum that he intended to post to. Maybe Jeff, or someone can clean up a bit. I think there will be a lot of this, and I'm not sure it's working smoothly yet.
Hunt

QM: Sample Size is 32767 if freely defined inspection point is used

Hi,
I am using Inspection plan with freely defined inspection point (100).
Inspection type: 04
I want to do 100% inspection. Material master setting is done for early lot creation.
If I use freely defined inspection point in the plan and create an order of any quantity > 32767, I get a sample size of 32767. If create a order of 100000 qty still sample size is 32767 and I can't even change it during result recording. If I don't use freely defined inspection point I get a sample size which is equal to the order quantity.
My Requirement:
I want to use freely defined inspection point in the plan... and also I want to get a sample size equal to production quantity (not 32767 always when production quantity exceeds the this quantity).
Please let me know how to control this fix sample size 32767 when my plan is with freely defined inspection point.
Regards,
Abir.

Hi,
Sample size under 'Inspect' column in result recording screen is always 32767, if order quantity >32767.
I use EARLY lot creation (through material master setting), because I want one lot for one production order... do partial confirmation. Lot is created with production order release, before actual GR takes place.
Say I have an order with qty 100,000 and if I open the lot after REL of order I see,
inspection lot quantity: 100,000
Actual Lot Qty:             0
Sample Size:                100,000
Even if I do confirmation and GR for say 100,000 qty and open the Lot I can see,
inspection lot quantity: 100,000
Actual Lot Qty:             100,000
Sample Size:                100,000
When I go to result recoding screen, against every MIC there is column 'Inspect' (there I get 32767), there is another entry field 'Inspected' (here system don't allow to enter more that 32767)
Sampling procedure I have used:
Sample Type:     200    100% Inspection
Valuation Mode: 500    Manual Valuation
Free Inspection Point
May be I made mistake in pointing out the issue; the problem is with 'Inspect' quantity in result recording - which always appearing 32767. For smaller quantity order its equal to order quantity. How change the 'Inspect' quantity.
Also not if I remove Inspection Point from the plan I get "Inspect' quantity equal to Production order quantity.
Best regards,
Abir.

Sample Size is Zero

Similar Messages

Maybe you are looking for