Sample xorg.conf files not found

Hi, everyone
I'm installing xorg, and need to refer some sample xorg.conf, but some of the links on the xorg wiki are not found. I think they should be updated.

Thank you for reply!
I have set up gnome, but using open source driver (vesa) for my graphic card (VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300])

Similar Messages

Process.conf file not found after installing Sun One Portal Server 6.0

This extract is from the Sun One Portal Server development guide for logging error or logs in log file. This says that to generate the log, entry should be done to enable logging in process.conf file. I could not find any such file after installing Sun One Portal Server 6.0.
Any help will be appreciated...
Reporting Errors to the Robot Log File
When problems occur, robot application functions should return an appropriate response status code (such as REQ_ABORTED), and they should also log an error inthe error log file.
To use the error-logging functionality, you must include the file log.h in thesdk/robot/include/libcs directory. After you have ensured that log.h exists in the correct place, you can use the cslog_error macro to report errors. The prototype is in the following format:
cslog_error(int n, int loglevel, char* errorMessage)
The first parameter is not currently used (may be used in the future) You can pass
this as any integer.
The second parameter is the log level. When the log level is less than or equal to the log level setting in the file process.conf, the error message is written in the robot.log.

Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

Configuration file jdbcpds.conf is not found.

Hi,
My problem is: Configuration file jdbcpds.conf is not found
When: I've this problem when I try to run a report with rwrun. The file is in the reports/conf folder. We try execute this reports at the client side.
I think that reports doesn't find the conf files because folder's name have changed. In wich configuration files/registry/env. path i can put the access to the reports/conf folder?
Under 10g
Thx very much

I've found my problem
in ORACLE_HOME\cauprefs.ora I've to add this line
Reports.PluggableDataSourceFactories = "oracle.reports.plugin.datasource.jdbcpds.JDBCDataSourceFactory"
in ORACLE_HOME\reports\conf\rwbuilder.conf I've to add this line
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
that it!

EXS Factory Samples - File Not Found

After moving my EXS Factory samples to an external HD, many of the patches will not load and I get File Not Found Result Code=-43. I've moved them back to the original folder again. What have I done? Are these sounds gone forever?

Hey Thomas. I recently moved the EXS samples to my external harddrive and had similar problems. I posted on this board and got everything worked out. Follow this thread... it might help:
Craig Bryant, "Copying EXS samples and Apple loops to external drive", 04:31pm Oct 19, 2005 CDT
Good luck

Http404-File not found - again

First let me say I've scoured this forum and cannot solve my problem.
I was attempting to expose my server to the internet and appear to have done a fine job of messing things up. I have been using AppEx 1.6, 10g db and the Http server from the companion cd since January. Now all I get is the 404- file not found error.
Here's my DAD which I just created because it originally was blank:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "D:\oracle\product\10.2.0\db\htmldb\images/"
<Location /htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword <mypassword>
PlsqlDatabaseConnectString localhost:1521:orcl ServiceNameFormat
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.WE8MSWIN1252
</Location>
my most recent access_log:
192.168.1.20 - - [26/Apr/2006:20:04:38 -0500] "GET / HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:38 -0500] "GET /ohs_images/portals.css HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:38 -0500] "GET /ohs_images/home_banner_2.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:38 -0500] "GET /ohs_images/space.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:38 -0500] "GET /Tab_files/asytlse.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/asytrsm.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/asytrnse.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/green-green.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/asysrt.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/asylrhs.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/asybase.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /ohs_images/tree_document.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:39 -0500] "GET /Tab_files/lowerbox.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /ohs_images/relatedapps_cctitle.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /ohs_images/slieghright.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /Tab_files/blue-content.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /Tab_files/green-content.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /ohs_images/bisspace.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /ohs_images/art3.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /ohs_images/welcomeHTTP.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /Tab_files/upperbox.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /ohs_images/rhshadow.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:40 -0500] "GET /Tab_files/asysrtb.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:41 -0500] "GET /Tab_files/asylttb.gif HTTP/1.1" 304 -
192.168.1.20 - - [26/Apr/2006:20:04:45 -0500] "GET /pls/htmldb/f?p=4550:1:6413350672579291785 HTTP/1.1" 404 338
my most recent error_log:
[Wed Apr 26 19:56:24 2006] [notice] FastCGI: process manager initialized
[Wed Apr 26 20:04:45 2006] [error] [client 192.168.1.20] [ecid: 1146099885:192.168.1.20:2844:1976:3,0] File does not exist: d:/oracle/product/10.2.0/db/apache/apache/htdocs/pls/htmldb/f
When I try to access http://valued-cb7d4c82:7777/pls/htmldb all I get is the 404 message. I can access the Http Server Welcome page.
Could someone please look at these. I'm at a loss after two days. Thanks.
Message was edited by:
calysto10

Usually if an image in a page cannot be retrieved, Firefox does not redirect the entire page to an error message; the area of the image is just left blank. So this is not normal.
On the error page, what do you see in the address bar, if anything?
To test whether one of your extensions might be the culprit, could you test some problem pages in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Xorg.conf file idea..

i had an idea: would it be possible to make a large database of xorg.conf files for certain laptops? i found a list of "howto linux" on different models of lappys...
for example, i have a sony vaio pcg-tr3a, and i'm struggling to get my xorg file to work right, so i would head on over to the data base and search for my computer model...
would this work?
sv

<soapbox>
ok. so i guess this idea would not work.. now i am seeing but how bout if laptop users just wrote a wiki entry for there laptop? like... hardware specific stuff...
for example: i figured out that i have an intel wireless card and i needed a closed source intel2200-fw or something to get it to work. i went to the wireless networking wiki, but how bout it if i could have found a wiki on my model lappy (fat chance maybe...?)
that said : "ok, for this lappy you need 915resolution hack, intel firmware driver for your wirless, and i810driver for your graphics, also you may want to add this to your xorg.conf to get trackpad scrolling to work" and then also "and btw, to get Fn keys working go here"
so it would be small tutorials helpful to few people with same laptops and it would be extremly confinient... and for someone just getting into linux... a quick guide to get everything set up right step by step would be helpful.. granted, arch does not hold your hand... and i think it shouild be that way... we learn a lot trying different things and reading wikis over and over again...
</soapbox>
ok, thats all
sv

How to embed audio to my website using quicktime when I get "file not found

hi,
i've been trying to embed audio into my website all night and I get a file not found message even though I;ve checked 100 times and all files are where links say they should be..
but even just linking to audio (mp4) files won't work...
everything is o.k. with non-audio links on my website - only the mp4 audio can't be found.
can anyone help me? or post the correct code?
I've tried using these formats..
<EMBED SRC="anymovie.mov" HEIGHT=176 WIDTH=136>
<embed
src="http://www.crossandthrone.com/.samples/qt/sample-reference2.mov"
width="242" height="199" autoplay="false" loop="false"
controller="true" bgcolor="#666666"
pluginspage="http://www.apple.com/quicktime/"></embed>
the pages that should play audio just have a quicktime file with a question mark on them
help would be much appreciated!

Start here:
http://www.mediacollege.com/video/streaming/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"subdued2u" <[email protected]> wrote in
message
news:gbg2th$r13$[email protected]..
> Hello ,guys, i have a website,, and i would like to add
upload vidoes on
my
> website i have tried but did not work can anyone please
tell me how to
embed my
> videos in my website using dreamwever ?
> thank so much
>

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

File Not Found Error on Fresh MX7 Installation

After spending days getting CFMX 7.0.2 installed on a CentOS5.3 (production) server running Apache 2.2.3 and WHM/cPanel 11, by religiously following Bill Mitchell's lifesaving guide, CF is up and running but I cannot access the administrator or anything else in user public_html directories.
If I place a simple foo bar test file in the /usr/local/apache/htdocs/testfile.cfm directory, I can call it at http://[IPaddress]/testfile.cfm and it parses properly.
However, if I place the same file at /home/cfusion/public_html/testfile.cfm and call it at http://[IPaddress]/~cfusion/testfile.cfm, I get a CF-generated 404 "File Not Found" error.
cfusion is a cPanel account I created via WHM prior to installing ColdFusion as a repository for my CFIDE directory.
If I place a symlink for /usr/local/apache/htdocs/CFIDE -> /home/cfusion/public_html/CFIDE:"File Not Found". If I cp -R my CFIDE into htdocs: "File Not Found." These files are physically there. I can easily verify that of course. But CF is still saying File Not Found. In fact, if I disconnect Apache - JRun, Apache finds the files all by itself no problem. They are definitely there.
I thought this might be a permissions issue, but all my .cfm files are nobody:root 775.
Here's what I'm seeing in the exception.log:
coldfusion.runtime.TemplateNotFoundException: File not found: /~cfusion/filetest.cfm
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:83)
    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
    at coldfusion.CfmServlet.service(CfmServlet.java:107)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I guess maybe I need to know where the config for webroots is set from the CF/JRun perspective? I'm a decent hand with web server admin stuff, but despite being a CF dev for 10 years, CF admin stuff is still a bit over my head. Any help would be GREATLY appreciated. I'm at my wit's end!

Thanks Mack. I set verbose to true in my httpd.conf, restarted Apache, restarted CF, but I can't see any difference in the logging. Errors seem the same, and no additional info.
The Apache error_log file is filled with cryptic stuff that looks like it's referencing JRun. Does any of this mean anything to you? Is there another log file I should be looking at?
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filterRequest:   no match
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: r is 0x9d1aa98, server is 0x99df290, virtual 1
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: no handler, return DECLINED
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] jrun_trans: r is 0x9d169d8, server is 0x99df290, virtual 1
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910]     HOST: <null>
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474]     HOST: <null>
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: no handler, return DECLINED
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] jrun_trans: r is 0x9f96cc8, server is 0x99df290, virtual 1
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314]     HOST: <null>
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filterRequest:   no match

File Not Found Error running JSP demos

I'm not sure what is going on, but it appears that every time I try to run a jsp, the server looks in the document root where it errors out with a file not found error. I've seen others with this type of problem but I haven't seen a solution. Anyone have any ideas?
Thanks.

1: Double check the port number that your Tomcat Server is using. (TOMCAT_HOME/conf/server.xml).
2: check you IP. This is not the 'localhost' IP (not sure if it is LAN or real IP). So it may change dynamically.
3: Check for Firewalls. Also, since you are not using localhost, you will have to make sure you traverse all the firewalls built around your system. If you have a router (home), windows XP, or some other firewall, make sure the appropriate ports are opened. If you are behind a corporate firewall, or your ISP closes ports... your kinda out of luck until you find a way to cheat around them.
2: Try just using just "/ValidateUser.jsp" as long as it is one the same domain as the Form. This will make it less likely to break, should your IP change.

Getting "QueueConnection" file not found error in IOS

Hi All,
Iam using SUP 2.1 ESD #1, in have tried the sample SUP101Sample in IOS, but it is showing the "QueueConnectionu201D file not found error. can anyone help to resolve this.
Thanks,
B.Ushasri

Can I ask what version of iOS you are using? Have you been able to compile youre code?
Thanks
Ian

File Not Found Error in JSP

hi..i m developing one application in JDeveloper...now from html file i am directing to jsp page. using Form tag
<form action="http://128.127.100.51:8990/ValidateUser.jsp" name="login" method="post"> but it shows me error. "http://128.127.100.51:8990/ValidateUser.jsp" file not found..though html file and ValidateUser.jsp file both are in Public_html file
Now wht is wrong with this
Regards
Chintan

1: Double check the port number that your Tomcat Server is using. (TOMCAT_HOME/conf/server.xml).
2: check you IP. This is not the 'localhost' IP (not sure if it is LAN or real IP). So it may change dynamically.
3: Check for Firewalls. Also, since you are not using localhost, you will have to make sure you traverse all the firewalls built around your system. If you have a router (home), windows XP, or some other firewall, make sure the appropriate ports are opened. If you are behind a corporate firewall, or your ISP closes ports... your kinda out of luck until you find a way to cheat around them.
2: Try just using just "/ValidateUser.jsp" as long as it is one the same domain as the Form. This will make it less likely to break, should your IP change.

File not found error for php

Today i installed php and nginx at my laptop. I found there is always a error "File not found." when I visit 127.0.0.1/index.php if I put index.php in /tmp or subfolder of /tmp.
But if i put index.php in other folder, there is no such problem
Is there anyone who know why?
[hongy19@Archlinux http]$ cat /etc/nginx/nginx.conf |grep -C 3 -i tmp
location ~ \.php$ {
#root /usr/share/pear;
#root /srv/http;
root /tmp/http;
fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
try_files $uri =404;
fastcgi_index index.php;
[hongy19@Archlinux http]$ cat /etc/php/php.ini |grep -i open_base
; open_basedir, if set, limits all file operations to the defined directory
open_basedir = /srv/http/:/home/:/usr/share/pear/:/tmp/:/tmp/http/
[hongy19@Archlinux http]$ ls
index.php
[hongy19@Archlinux http]$ pwd
/tmp/http

Hi Dan,
If you had searched you would have found out how to make this work.
Search on "crdb_adoplus.dll" or "useLegacy" and you'll find the answer. As well as setting your framework to full and not the client.
Don

File Not found error when calling Form Post Method to a JSP from JSP Portlet

I have built a set of JSP forms using post method to call other JSPs. Normally, the code looks like
<form name="MyForm" action="MyJsp.jsp" method="post">
I migrated the calling form containing this code to a portlet, but not the MyJsp.jsp. When I submit the form, I get a file not found in Jserv.log
Exception:javax.servlet.ServletException: java.io.FileNotFoundException: D:\servlet\RegisterCompany.jsp (The system cannot find the file specified)
[14/06/2001 13:59:59:679 PDT] JspServlet: unable to dispatch to requested page: Exception:javax.servlet.ServletException: java.io.FileNotFoundException: d:\oracle\isuites\apache\apache\MyJsp.jsp (The system cannot find the file specified)
I notice that launching the calling jsp from a portlet, my opriginal context that uses ../Apache/Apache/htdocs is not being searched for the JSp. Why is this? Moreover, I try to set up an Alias in httpd.conf file to the this director and use it with the jsp in the action tag, but still get an error that my jsp servlets/Myjsp can't be found. Why is it insiting on looking at servlets context instead of htdocs.
I have none of these issues outside of Portal30 using IAS.
regard

Initially, I couldn't do this unless I moved tghe jsp's up to the root directory of IAS, i.e ../Apache/Apache. Nomrally, htdocs is my doc directory for IAS. I could not do http:\\myUrl\htdocs\myJsp. If I tgried this, I got an error in Apache error logg that said can't find file ..\htdocs\htdocs\MyJsp.jsp.
If I just tried the the URL http:\\myUrl\MyJsp.jsp with Jsp file in htdocs, I would get an error in the Jserve log that file d:\oracle\isuites\apache\apache\MyJsp.jsp could not be found. Once I moved the file MyJsp to Apache/Apache directory, it could be found using http:\\myUrl\MyJsp.jsp. Later, I delted these files and kept the ones in htdocs and they continued to work.
I'm confused why launching pages through portal isn't consistant with Apache Standards. Where is the documentation that tells me how to configure context and aliases for pages launched from portal pages?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sue Vickers ([email protected]):
David,
Passing information using Portal is different than just using Apache/Jserv. Does it work in portal if you use the absolute path?
<form name="MyForm" action="http://host.domain/MyJSP.jsp" method="post">
Portal will not be on the same relative path as your Apache, so you may need to adjust your action somehow.
Thanks,
Sue<HR></BLOCKQUOTE>
null

Sample xorg.conf files not found

Similar Messages

Maybe you are looking for