Sampled Runstats

Hi,
If we are running the RUNSTATS automatic, it is running completely on the tables and hence on large tables it is taking
too much of time.
Please advise me the procedure to run the RUNSTATS automatic with sampling enabled i.e., the RUNSTATS should
run automatically with specified sampling.
Thanks & Regards,
Venkata

Hi,
does the following help ?
At database level, you can define individual options for statistics collection for a table which are used
by automatic statistics collection in a statistics profile. Automatic statistics collection respects statistics
profiles that were defined in a way that the profile options are used instead of the default. To define a
statistics profile for a table, issue a RUNSTATS command with the appropriate statistics collection
options and with the option SET PROFILE (as shown in the following example that collects statistics
on a 10% sample of the table data only using Bernoulli sampling):
RUNSTATS ON TABLE tableschema.tablename
WITH DISTRIBUTION AND SAMPLED DETAILED INDEXES ALL
TABLESAMPLE BERNOULLI (10) SET PROFILE

Similar Messages

Issue with DataApp Sample in JavaFX.

Okay so I downloaded the Samples pack here http://jdk8.java.net/download.html or here http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html at the bottom.
Inside is one called DataApp which requires setting up an SQL DB, and connecting to it.
In Netbeans8 I get an error about not having RestLib api inside the DataAppClient which according to the setup DataAppClient - The JavaFX 2.0 client application. inside there you can see a package with packages that wont import such as
import com.sun.jersey.api.client.Client;
import com.sun.jersey.api.client.UniformInterfaceException;
import com.sun.jersey.api.client.WebResource;
import com.sun.jersey.api.json.JSONConfiguration;
So why am I in a Java 8 samples pack needing FX 2? Though I'm not sure if it's FX8 yet, I just didn't think the 2.0 client would work.
So I tried Netbeans 7.3 to see if it would work. At first the DataAppClient was fine, but I see the DataAppPreloader will not run because it uses Package javafx.something which apparently is new in Java 8.....
So now I'm stuck, wondering why Restlib doesn't exist... I looked it up, and it says it's used for Web services, but I don't have it, nor does it say to install it in the readme.
not existing, which I guess has to do with the RestLib?
Anyone have any ideas?
EDIT: So I just downloaded the version for FX2, and I am still getting the same error when I run it, though nothing shows "errors" in the packages. Maybe I just needed to run it correctly for it to work, so not what is this error tellingme
Creating "dataapp" user and "APP" database...
Executing commands
Failed to execute: INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL)
C:\Users\Konrad\Downloads\javafx_samples-2_2_7-windows\javafx-samples-2.2.7\src\DataApp\DataAppLoader\build.xml:84:
java.sql.SQLException: Column count doesn't match value count at row 1
     at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1073)
     at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3609)
     at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3541)
     at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:2002)
     at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2163)
     at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2618)
     at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2568)
     at com.mysql.jdbc.StatementImpl.execute(StatementImpl.java:842)
     at com.mysql.jdbc.StatementImpl.execute(StatementImpl.java:681)
     at org.apache.tools.ant.taskdefs.SQLExec.execSQL(SQLExec.java:775)
     at org.apache.tools.ant.taskdefs.SQLExec.runStatements(SQLExec.java:745)
     at org.apache.tools.ant.taskdefs.SQLExec$Transaction.runTransaction(SQLExec.java:1043)
     at org.apache.tools.ant.taskdefs.SQLExec$Transaction.access$000(SQLExec.java:985)
     at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:653)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
     at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:601)
     at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
     at org.apache.tools.ant.Task.perform(Task.java:348)
     at org.apache.tools.ant.Target.execute(Target.java:392)
     at org.apache.tools.ant.Target.performTasks(Target.java:413)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
     at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:283)
     at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:541)
     at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:153)
BUILD FAILED (total time: 6 seconds)I have put the 1.18 derby file into glassfish, download and set up MySQL using a netbeans reference,I had set my root password and such as well.
The only thing I haven't done is created a DB, but I don't think I need one, and the instructions don't say anything.
I have Netbenans 7.3, 8, and Java vers 7_15 and 8 build 82.
GlassFish 3.1.2 as well as 4.0 build 76 which I haven't installed.
I hav e MySQL 5.6
Java FX 2.0 and 8 build 82.
The instructions are
DataApp Installation Guide
Table of Contents
Prerequisites
Setting Up the DataApp Sample
Running the Sample
NetBeans Projects for the Sample
Licensing
Prerequisites
You must have the following software installed to run the DataApp sample:
Java SDK 1.6.0_24 or later
Available at http://www.oracle.com/technetwork/java/javase/downloads/index.html.
JavaFX 2.0 SDK or later
Available at http://javafx.com/downloads/all.jsp.
MySQL 5.5 or later
Available at http://dev.mysql.com/downloads/.
You need to know the root password for your installation.
Netbeans 7.1 with Java EE and GlassFish 3.1.1 or later
Available at http://netbeans.org/downloads/.
Run the NetBeans installer to install NetBeans and GlassFish to the default locations.
Setting Up the DataApp Sample
Install the MySQL drivers into GlassFish.
Manually copy the mysql-connector-java-5.1.13-bin.jar file from the netbeans-install-dir\ide\modules\ext\ to the glassfish-install-dir/glassfish/lib directory, where netbeans-install-dir and glassfish-install-dir are the directories into which the products were installed. For example, on Windows the install directory for products is typically in the C:\Program Files\ or C:\Program Files (x86)\ directories.
Open the following DataApp projects in NetBeans by selecting File ->Open Project and navigating to the location of the DataApp sample:
DataAppClient
DataAppLibrary
DataAppLoader
DataAppPreloader
DataAppServer
Configure and create the database (only needs to be done once):
In NetBeans, right-click the DataAppLoader project.
Select Run.
Enter your MySQL root password when prompted.
Wait until you see the message that the build has successfully finished, which takes approximately 5 to 15 minutes.
Running the Sample
Start the server:
In NetBeans, right-click the DataAppServer project.
Select Run.
Wait until a browser window opens that says: YOU ARE DONE!
(Optional) Start the standalone client:
In NetBeans, right-click the DataAppClient project.
Select Run.
NetBeans Projects for the Sample
DataAppLibrary - Contains the following data:
Database tables
ORM model to database tables
DataAppLoader - Application that is run once to perform the following tasks:
Creates the database.
Loads all of the static data for the data app.
Creates some historical data.
DataAppServer - Web server that performs the following tasks:
Simulates auto sales and persists them to the database.
Provides access to the database through web services.
DataAppClient - The JavaFX 2.0 client application.
Licensing
The license for the DataAppLoader/zip_code_inserts.sql file is the Creative Commons Attribution-ShareAlike license, which is available at http://creativecommons.org/licenses/by-sa/2.0/.
The license for all other files is the BSD style license:
* Copyright (c) 2008, 2011 Oracle and/or its affiliates.
* All rights reserved. Use is subject to license terms.
* This file is available and licensed under the following license:
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
* - Neither the name of Oracle Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright © 2011, Oracle and/or its affiliates. All rights reservedEdited by: KonradZuse on Mar 27, 2013 9:39 AM
Edited by: KonradZuse on Mar 27, 2013 9:51 AM
Edited by: KonradZuse on Mar 27, 2013 9:58 AM

I found the same issue but resolved it by myself. The user table of the MySQL changed, my guess. You need to add another 'Y' or 'N' to the end of this statement in the build.xml of DataAppLoader:
INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL,'N');
The original one is like this:
INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL);
The new column added is password_expired. Y or N to indicate the password is good or not.

How do I access RunState via the C interface?

I'm utilzing TestStand by controlling it via a C++ program and TestStand as a COM module. I haven't been able to find how to access the RunState property. Thanks.
-G-

Hey Grasshopper,
I'm not certain, but it sounds like you are building a User Interface in C++ to operate your sequences, much like the one you can find at C:\Program Files\National Instruments\TestStand 3.1\OperatorInterfaces\NI\Full-Featured\C++ using MFC. If this is the case, then the way to get access to the RunState property is by utilize UIMessages. You should be able to do a search on the forums or in the Developer Zone and find some more information and sample code about UI Messages, but in a nutshell, you'll send a message to the User Interface that you are building by utilizing the ActiveX adapter (Action Step) in a TestStand sequence (The Method is PostUIMessageEx and can be found in the Thread class). When you send the data you will want to send ThisContext via the ActiveX parameters. You will then use the ApplicationMgr Control in your UI to register the UserMessage event and then create a function to be called when this event does occur. In this function, you can get the Sequence Context from the ActiveX parameter and at that point can handle it just like any other code module to get and set items within your locals, runstate, or whatever you want. That should give you a start, let me know if you into major issues.
Adam B.

How do I find, at-a-glance, the sample size used in several music files?

How do I find, at-a-glance, the sample size used in several music files?
Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
Running 10.8.5 on an iMac i5.
I did search through a couple of communities but came up empty.
Thank you,
Craig

C-squared,
There is no View Option to allow display of a column of sample size.
For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know). For MP3 and AAC it is not available at all.
You can roughly infer it from the files that are larger than expected for their time.
99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority. However, if you want to make a suggestion to Apple, use this link:
http://www.apple.com/feedback/itunesapp.html

COGS update on other GL Account at the time of Free goods or Sample goods

Hello,
In sales process, Usually the at the time of Delivery, material document is created as
DR COGS
CR INVENTORY
But in the case of free goods or bonus goods or samples: the account should not determines COGS instead it should determine another GL Account called as Free good -COGS expense A/c.
How can we solve the issue.
Regards,
SK

Hi Yasar,
You need to create a new routine for calculate type.
Do as below:
1. Go to VOFM>Formulas>calc.rule Rebate InKd to create a new routine for calculate type. for example 601.
2. add the following code in this routine 601 and then save.
USING L_FRM STRUCTURE KONDN_FRM.
DATA: VORKOMMA LIKE KONDN-KNRMM,
NACHKOMMA LIKE KONDN-KNRMM.
L_FRM-NRMENGE = 0.
L_FRM-NRRUND = 0.
L_FRM-NRMENGE = ( L_FRM-MGLME / L_FRM-KNRNM * L_FRM-KNRZM ).
business rounding
VORKOMMA = FLOOR( L_FRM-NRMENGE ).
L_FRM-NRRUND = L_FRM-NRMENGE - VORKOMMA.
L_FRM-NRMENGE = VORKOMMA.
3. Select routine 601 in field "Calc.Rule" when you create free goods condition record.
Hope it helps.

Error in compiling Photoshop CC 2014 sample project

Hi,
I am trying to compile SDK sample project "outbound". but it is showing errors, as "Parse Issue: Unknown type name 'DialogPtr' " in DialogUtilities.h .
DialogUtilities.h file is in "Adobe Photoshop CC 2014:photoshopsdk:pluginsdk:samplecode:common:includes".
even if I add this path in project settings it still shows the errors.
how can I make this work?
I am using Photoshop CC 2014 and Xcode version is 4.6.3 (4H1503)
If you have any idea regarding project settings then please let me know.
Thanks and regards,
Priyanka.

Are you using the CC 2014 release of the SDK?
The DialogUtilities.h for mac do not work. They are the old Carbon API's. See the Dissolve example for an Objective-C UI.
I would comment out the DialogUtilities.h include and other associated headers for Carbon UI. Some Carbon calls still work that are unrelated to UI.

How to log in to Service Desk to create sample message to SAP?

Dear all,
How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
Regards
GN

Hi GN,
You have different options to create messages in test component SV-SMG-SUP-TST:
1. if you are on 7.1 you can create message using CRM_UI
2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
Thanks
Regards,
Vikram

SSO java sample application problem

Hi all,
I am trying to run the SSO java sample application, but am experiencing a problem:
When I request the papp.jsp page I end up in an infinte loop, caught between papp.jsp and ssosignon.jsp.
An earlier thread in this forum discussed the same problem, guessing that the cookie handling was the problem. This thread recommended a particlar servlet , ShowCookie, for inspecting the cookies for the current session.
I have installed this cookie on the server, but don't see anything but one cookie, JSESSIONID.
At present I am running the jsp sample app on a Tomcat server, while Oracle 9iAS with sso and portal is running on another machine on the LAN.
The configuration of the SSO sample application is as follows:
Cut from SSOEnablerJspBean.java:
// Listener token for this partner application name
private static String m_listenerToken = "wmli007251:8080";
// Partner application session cookie name
private static String m_cookieName = "SSO_PAPP_JSP_ID";
// Partner application session domain
private static String m_cookieDomain = "wmli007251:8080/";
// Partner application session path scope
private static String m_cookiePath = "/";
// Host name of the database
private static String m_dbHostName = "wmsi001370";
// Port for database
private static String m_dbPort = "1521";
// Sehema name
private static String m_dbSchemaName = "testpartnerapp";
// Schema password
private static String m_dbSchemaPasswd = "testpartnerapp";
// Database SID name
private static String m_dbSID = "IASDB.WMDATA.DK";
// Requested URL (User requested page)
private static String m_requestUrl = "http://wmli007251:8080/testsso/papp.jsp";
// Cancel URL(Home page for this application which don't require authentication)
private static String m_cancelUrl = "http://wmli007251:8080/testsso/fejl.html";
Values specified in the Oracle Portal partner app administration page:
     ID: 1326
     Token: O87JOE971326
     Encryption key: 67854625C8B9BE96
     Logon-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
     single signoff-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout
     Name: testsso
     Start-URL: http://wmli007251:8080/testsso/
     Succes-URL: http://wmli007251:8080/testsso/ssosignon.jsp
     Log off-URL: http://wmli007251:8080/testsso/papplogoff.jsp
Finally I have specified the cookie version to be v1.0 when running the regapp.sql script. Other parameters for this script are copied from the values specified above.
Unfortunately the discussion in the earlier thread did not go any further but to recognize the cookieproblem, so I am now looking for help to move further on from here.
Any ideas will be greatly appreciated!
/Mads

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

Sample source code for fields mapping in expert routine

Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliaz

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

SAMPLE RECEIVING OPEN INTERFACE SCRIPT(ROI 이용자를 위한 SCRIPT)

제품: MFG_PO
작성날짜 : 2006-05-11
SAMPLE RECEIVING OPEN INTERFACE SCRIPT(ROI 이용자를 위한 SCRIPT)
================================================================
PURPOSE
Receiving Open Interface(ROI)를 좀더 쉽게 사용할 수 있도록 만들어진
tool이라고 할 수 있다. 이 script를 이용을 통해 user는 PO no, user id,
Org id를 입력하면 script는 PO에서 최소한의 data를 가져와 receiving
transaction을 생성하기 위해 ROI에 data를 입력한다.
Receiving Transaction Processor는 insert 된 data를 실행한다.
Explanation
Instructions:
1.Script exroi.sql을 local computer에 copy 하거나 sqlplus 환경의 text
edior에 script 내용을 cut&paste 한다.
2.사용가능한 PO no, User id, Org id를 결정한다.
3.sqlplus prompt에서 아래와 같이 입력한다.
SQL> @ezroi.sql
4.PO no, User id, Org id를 입력하라는 prompt를 볼 수 있을 것이다.
5.exroi.sql script를 관련된 PO data를 가져와 rcv_headers_interface 및
rcv_transactions_interface tables에 insert 한다.
만일 PO shipment lind이 closed, cancelled, fully received 되었다면
ROI table에 data를 insert 하지 않는다.
Note: 이 script가 data를 validate 하진 않으며,ROI API 자체 validation
이 실행될 뿐이다.
6.Script가 끝나면 Receiving Transaction Processor를 실행하여 insert 된
lines을 처리할 수 있다. Transaction Status Summary 화면을 통해 실행된
line이 pending 인지 error 상태인지 확인할 수 있다.
Notes:
1.Org_id parameter 값을 찾는법:
a) Application에 접속, Help> Diagnostics> Examine으로 이동.
Block:$Profile$, Field: ORG_ID 를 선택한다.
b) ORG_ID 값을 note 해 놓고 ORG_ID prompt시 이 값을 입력한다.
2.User_Name parameter 값을 찾는법:
a) Application에 접속, Help> Diagnostics> Examine으로 이동.
Block:$Profile$, Field: USER_NAME 를 선택한다.
b) USER_NAME 값을 note 해 놓고 USER_NAME prompt시 이 값을 입력한다.
Example
"eZROI.sql' script...
--*** eZROI ***
--*** by ***
--*** Preston D. Davenport ***
--*** Oracle Premium Applications Support ***
--*** Oracle Worldwide Global Support Services ***
--*** Date: 23-JUL-2003 - Beta release ***
--*** Date: 09-SEP-2003 - Rev A Added multi- ***
--*** shipment line capability ***
--*** Parameters: ***
--*** ORG_ID Organization ID ***
--*** USER_NAME FND User Name ***
--*** PO_NUMBER Purchase Order Number ***
--*** This script intended for a standard Purchase ***
--*** Order document to be inserted into the Oracle ***
--*** Receiving Open Interface (ROI) via the standard ***
--*** Oracle open interface api for a simple Receive ***
--*** transaction. ***
--*** Note: This script only considers open Purchase ***
--*** Orders. This script will not allow over- ***
--*** receipt, cancelled or closed PO's to be ***
--*** inserted into the ROI and received ***
CLEAR BUFFER
SET VERIFY OFF
SET LINESIZE 140
SET PAGESIZE 60
SET ARRAYSIZE 1
SET SERVEROUTPUT ON SIZE 100000
SET FEEDBACK OFF
SET ECHO OFF
DECLARE
X_USER_ID NUMBER;
X_PO_HEADER_ID NUMBER;
X_VENDOR_ID NUMBER;
X_SEGMENT1 NUMBER;
X_ORG_ID NUMBER;
X_LINE_NUM NUMBER;
BEGIN
DBMS_OUTPUT.PUT_LINE('***ezROI RCV API Insert Script***');
SELECT PO_HEADER_ID , VENDOR_ID , SEGMENT1 , ORG_ID
INTO X_PO_HEADER_ID , X_VENDOR_ID , X_SEGMENT1 , X_ORG_ID
FROM PO_HEADERS_ALL
WHERE SEGMENT1 = '&PO_NUMBER'
AND ORG_ID = &ORG_ID;
SELECT USER_ID INTO X_USER_ID
FROM FND_USER
WHERE USER_NAME = UPPER('&USER_NAME');
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID ,
GROUP_ID ,
PROCESSING_STATUS_CODE ,
RECEIPT_SOURCE_CODE ,
TRANSACTION_TYPE ,
LAST_UPDATE_DATE ,
LAST_UPDATED_BY ,
LAST_UPDATE_LOGIN ,
VENDOR_ID ,
EXPECTED_RECEIPT_DATE ,
VALIDATION_FLAG
SELECT
RCV_HEADERS_INTERFACE_S.NEXTVAL ,
RCV_INTERFACE_GROUPS_S.NEXTVAL ,
'PENDING' ,
'VENDOR' ,
'NEW' ,
SYSDATE ,
X_USER_ID ,
0 ,
X_VENDOR_ID ,
SYSDATE ,
'Y'
FROM DUAL;
DECLARE
CURSOR PO_LINE IS
SELECT PL.ITEM_ID , PL.PO_LINE_ID , PL.LINE_NUM ,
PLL.QUANTITY , PL.UNIT_MEAS_LOOKUP_CODE ,
MP.ORGANIZATION_CODE , PLL.LINE_LOCATION_ID ,
PLL.CLOSED_CODE , PLL.QUANTITY_RECEIVED ,
PLL.CANCEL_FLAG, PLL.SHIPMENT_NUM
FROM PO_LINES_ALL PL ,
PO_LINE_LOCATIONS_ALL PLL ,
MTL_PARAMETERS MP
WHERE PL.PO_HEADER_ID = X_PO_HEADER_ID
AND PL.PO_LINE_ID = PLL.PO_LINE_ID
AND PLL.SHIP_TO_ORGANIZATION_ID = MP.ORGANIZATION_ID;
BEGIN
FOR CURSOR1 IN PO_LINE LOOP
IF CURSOR1.CLOSED_CODE IN ('APPROVED','OPEN')
AND CURSOR1.QUANTITY_RECEIVED < CURSOR1.QUANTITY
AND NVL(CURSOR1.CANCEL_FLAG,'N') = 'N'
THEN
INSERT INTO RCV_TRANSACTIONS_INTERFACE
INTERFACE_TRANSACTION_ID ,
GROUP_ID ,
LAST_UPDATE_DATE ,
LAST_UPDATED_BY ,
CREATION_DATE ,
CREATED_BY ,
LAST_UPDATE_LOGIN ,
TRANSACTION_TYPE ,
TRANSACTION_DATE ,
PROCESSING_STATUS_CODE ,
PROCESSING_MODE_CODE ,
TRANSACTION_STATUS_CODE ,
PO_LINE_ID ,
ITEM_ID ,
QUANTITY ,
UNIT_OF_MEASURE ,
PO_LINE_LOCATION_ID ,
AUTO_TRANSACT_CODE ,
RECEIPT_SOURCE_CODE ,
TO_ORGANIZATION_CODE ,
SOURCE_DOCUMENT_CODE ,
DOCUMENT_NUM ,
HEADER_INTERFACE_ID ,
VALIDATION_FLAG
SELECT
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL ,
RCV_INTERFACE_GROUPS_S.CURRVAL ,
SYSDATE ,
X_USER_ID ,
SYSDATE ,
X_USER_ID ,
0 ,
'RECEIVE' ,
SYSDATE ,
'PENDING' ,
'BATCH' ,
'PENDING' ,
CURSOR1.PO_LINE_ID ,
CURSOR1.ITEM_ID ,
CURSOR1.QUANTITY ,
CURSOR1.UNIT_MEAS_LOOKUP_CODE ,
CURSOR1.LINE_LOCATION_ID ,
'RECEIVE' ,
'VENDOR' ,
CURSOR1.ORGANIZATION_CODE ,
'PO' ,
X_SEGMENT1 ,
RCV_HEADERS_INTERFACE_S.CURRVAL ,
'Y'
FROM DUAL;
DBMS_OUTPUT.PUT_LINE('PO line: '||CURSOR1.LINE_NUM||' Shipment: '||CURSOR1.SHIPMENT_NUM||' has been inserted into ROI.');
ELSE
DBMS_OUTPUT.PUT_LINE('PO line '||CURSOR1.LINE_NUM||' is either closed, cancelled, received.');
END IF;
END LOOP;
DBMS_OUTPUT.PUT_LINE('*** ezROI COMPLETE - End ***');
END;
COMMIT;
END;
SET VERIFY ON
Reference Documents
Note 245334.1

I have the same problem on ESXI 5.5 for over a month now, tried the patches, tried the LTS kernel which others say results in an immediate result without patches, nothing seems to work and nobody seems to be able to offer a solution.
Did you make any progress ??
Error! Build of vmblock.ko failed for: 3.10.25-1-lts (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
make[2]: *** No rule to make target '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/linux/inode', needed by '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/vmblock.o'. Stop.
Makefile:1224: recipe for target '_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock' failed
make[1]: *** [_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock] Error 2
make[1]: Leaving directory '/usr/src/linux-3.10.25-1-lts'
Makefile:120: recipe for target 'vmblock.ko' failed
Last edited by crankshaft (2014-01-10 11:32:32)

Can anybody recommend me on the strain gauges which are attached along a steel bar, say, 3 mm in diameter, and can respond at a sampling rate of 100 kHz?

Or anybody has similar application, it would be very grateful if you can share your experience.

Many thanks for your information. We are about to investigate the dynamic performance of soil anchorage subject to dynamic impulse in a geotechnical centrifuge. Basically, 5 model anchorages (3 mm in diameter) are to be constructed. Each model anchorage is instrumented with 1 accelerometer, 1 load cell and 6 strain gauges. Therefore, the minimum instrumentation would be
1) 30 strain gauges
2) 5 accelerometers
3) 5 load cells
It is worth noting that all the instruments would eventually reside in a geotechnical centrifuge operating in a 10g gravitational field. Whilst the DAQ system would experience much less 'g force' since they are to be placed close to the rotation axis of the machine.
These model anchorages would be tested one by one dyn
amically on each individual basis, whilst the other four are also preferably to be monitored during the tests. For an active model anchorage which is under testing, simultaneous sampling is preferred for its 8 sensors to be measured at the same instant in time (Besides, it is also understood that the natural frequency of the model anchorage is estimated to be in the range of several kHz). For the other four model anchorages, simultaneous sampling could be less demanding. It would therefore be ideal that simultaneous sampling can be switched among the active testing model anchorages.
I am greatly appreciated if you can further advise me on this. Thanks in advance.

How do I find music I want by sample?

There is a sample of music in YouTube. I want to find more of the same by that sample. So how do I find more?
The sample is of laser harp play, but I am interested in the sound of it. The sound is deep and metallic, vibrating, almost menacing, mysterious at least. It is kind of space music, but I want that deep metallic vibrating sound, not just whatever space music. The music doesn't need to be as happy as in the sample, I would like it more deep, mean, and mysterious too. The music can be ambient or then have more detail to it. But it shouldn't be bass booming, which I hate.
Sample: http://uk.youtube.com/watch?v=sLVXmsbVwUs

Well, he does all kinds of space music songs like below in the link. That doesn't help much, because I want only music that has the metallic vibrating sound. The sound should play major role in the songs. I want to be able to find music by the sample, not searching through music I don't need. Also I would like to get other artists' music too, not only this one's.
Link: http://uk.youtube.com/watch?v=x8dqzTl0vUI
Message was edited by: ThunderHorse

How to Delete a Specific Cell in a Matrix + plz Give sample code for Lost F

hello there !!!!
i m in Great Trouble please help me out..
i have to search for a specific Column n then i have to validate that portion, similarly after validating i have to add update delete all the fuction apply... so please help me i m very upset.
Public Sub HandleEventts_Allowance(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByRef BubbleEvent As Boolean)
        Try
            Dim Count As Int32
            If FormUID.Equals("Allowance") Then
                If (pVal.BeforeAction = True) And (pVal.ItemUID = "1") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) Then
                    If pVal.Row = 0 Then
                        'BubbleEvent = False
                    End If
                    o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                    Count = o_Matrix.RowCount()
                    SBO_Application1.MessageBox("Matrix Count is " & o_Matrix.RowCount)
                    Validate(pVal, EventEnum, FormUID, BubbleEvent)
                End If
            End If
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub
    Public Sub Validate(ByRef pval As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByVal FormUID As String, ByRef BubbleEvent As Boolean)
        Dim Row, ii As Integer
        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
        o_Matrix.FlushToDataSource()
        Try
            For Row = 2 To o_Matrix.RowCount
                StrName = Convert.ToString(DBtable.GetValue("CardCode", Row - 1)).Trim()''' i got Error over there n rest of my code is also not working pls...
                StrUId = Convert.ToString(DBtable.GetValue("U_AlwID", Row - 1)).Trim()
                StrEnter = Convert.ToString(DBtable.GetValue("U_SupEnter", Row - 1)).Trim()
                StrExist = Convert.ToString(DBtable.GetValue("U_SupExist", Row - 1)).Trim()
                If Row - 1 < DBtable.Rows.Count - 1 Or (Not (StrName.Equals(String.Empty) And StrUId.Equals(String.Empty) And (StrEnter.Equals(String.Empty) Or StrExist.Equals(String.Empty))) And (Row - 1 = DBtable.Rows.Count - 1)) Then
                    If (Not StrName.Equals(String.Empty)) And ((StrUId.Equals(String.Empty) Or StrEnter.Equals(String.Empty)) Or StrExist.Trim.Equals(String.Empty)) Then
                        SBO_Application1.StatusBar.SetText("Invalid values provided!Blank values not vllowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                        BubbleEvent = False
                        Exit Sub
                    End If
                    For ii = Row To DBtable.Rows.Count - 1
                        If Convert.ToString(DBtable.GetValue("ColName", ii)).Trim().Equals(StrName.Trim()) Then
                            SBO_Application1.StatusBar.SetText("Invalid Allowance ID: Duplication Not Allowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                            oForm.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
                            BubbleEvent = False
                            Exit Sub
                        End If
                    Next
                    If CDbl(StrName) < 0 Then
                        SBO_Application1.StatusBar.SetText("Invalid values provided!Blank values not vllowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                        BubbleEvent = False
                        Exit Sub
                    End If
                End If
            Next Row
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub

Hello there
sir i want to Add Update and delete these three basic operation onto the Matrix, Sir u game me a Sample code of Delete a specific Column...
Sir can u do me a favour pls leave every thing n just told me how to update a matrix ,like i have to fill the matrix field through the DATABASE table now i want to update the DataBase table from the matrix..
i just only know thta i have to fill back database table with the help of FLUSHTODATABASE()
here is my Sample Code...n i have to update in the validate portion...
Public Sub HandleEventts_Allowance(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByRef BubbleEvent As Boolean)
        Try
            Dim oCellValue As SAPbouiCOM.EditText
            If FormUID.Equals("Allowance") Then
                If (pVal.ItemUID = "MatAllow") Then
                    If pVal.Row = 0 Then Exit Sub
                    o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                    If (pVal.Row > o_Matrix.RowCount) Then Exit Sub
                    oForm = SBO_Application1.Forms.Item(FormUID)
                    If (pVal.ItemUID = "1" Or EventEnum = SAPbouiCOM.BoEventTypes.et_CLICK) Then
                        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                        If pVal.ColUID = "ColName" And pVal.BeforeAction = True Then
                            If pVal.Row = 0 Then Exit Sub
                            oCellValue = CType(o_Matrix.Columns.Item(pVal.ColUID).Cells.Item(pVal.Row).Specific(), SAPbouiCOM.EditText)
                            If (oCellValue.Value.Trim().Equals(String.Empty) And o_Matrix.RowCount <> pVal.Row) Then
                                SBO_Application1.StatusBar.SetText("Invalid Allowance ID: Blank Value Not Allowed", )
                                oCellValue.Active = True
                                BubbleEvent = False
                                Exit Sub
                            End If
                        End If
                    End If
                End If
            End If
            Validate(pVal, EventEnum, FormUID, BubbleEvent)
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub
Public Sub Validate(ByRef pval As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByVal FormUID As String, ByRef BubbleEvent As Boolean)
        Dim str, str1 As String
        Dim checkbox1, Checkbox2 As SAPbouiCOM.CheckBox
        Dim o_Matrix As SAPbouiCOM.Matrix
        Dim Sum As Integer
        Dim oRecordset As SAPbobsCOM.Recordset
        Dim Container As Integer
        Dim Count As Int32
        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
        oRecordset = o_CompanyObj.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
        Try
            For Count = 0 To DBtable.Rows.Count - 1
                CodeFill = Convert.ToString(DBtable.GetValue("Name", Count).Trme())
                NameID = Convert.ToString(DBtable.GetValue("ColUID", Count).Trim())
                Price = Convert.ToString(DBtable.GetValue("ColPrice", Count).Trim())
                Quantity = Convert.ToString(DBtable.GetValue("ColQuant", Count).Trim())
                Total = Convert.ToString(DBtable.GetValue("ColTotal", Count).Trim())
                checkbox1 = o_Matrix.Columns.Item("ColSEnter").Cells.Item(Count).Specific
                Checkbox2 = o_Matrix.Columns.Item("ColSExist").Cells.Item(Count).Specific
                If (checkbox1.Checked = True) And (Checkbox2.Checked = True) Then
                    Dim Sql As String
                    Sql = "Update [@Supplier] Set U_Price=' " & Price & " ',U_ID=" & NameID & "Where Name ='" & CodeFill & " '"
                    oRecordset.DoQuery(Sql)
                End If
            Next Count
            SBO_Application1.MessageBox("Record was Updated")
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub

Error while running a sample code

Hello,
I 'm getting the following error while i'm trying to run a
sample code which I have imported into Flex 3.
===================================================================
Severity and Description Path Resource Location Creation Time
Id
unable to open 'C:\Documents and Settings\sn55179\My
Documents\Flex Builder
3\FlexForDummies_Chapter3_Code\libs'FlexForDummies_Chapter3_Code
Unknown 1237909480511 215
===================================================================
Can anyone help me in resolving this issue.
Many thanks in advance.

It's very frustrating that FB stops working when the libs
folder is missing. If you are checking in project files to a source
control app like Perforce, empty folders don't get added, so if you
don't add an initial dummy file, the next time you do a clean sync,
the libs folder may not be there, and even though there is nothing
there, FB complains. :-(

Error while running the sample program in Oracle CEP

Hi I am New to CEP. I have installed Oracle CEP 11g. I am trying to run the example available in sample folder. I am getting the below error.
Exception in thread "Main Thread" java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.wlevs.Server.main(Server.java:185)
Caused by: java.lang.IllegalArgumentException: Bundle <file:/D:/bea/modules/com.bea.core.apache.commons.logging.api_1.1.0.jar> has no known start level label
     at com.bea.backplane.launcher.Launcher.getStartLevelLabelFromJarLabel(Launcher.java:1663)
     at com.bea.backplane.launcher.Launcher.updateStartLevelViaJarLabel(Launcher.java:1714)
     at com.bea.backplane.launcher.Launcher.adjustStartLevel(Launcher.java:1625)
     at com.bea.backplane.launcher.Launcher.prepareConfig(Launcher.java:1169)
     at com.bea.backplane.launcher.Launcher.run(Launcher.java:539)
     at com.bea.backplane.launcher.Launcher.main(Launcher.java:149)
     ... 5 more
Please let me know the reason for getting the error.

I'm gussing you installed OCEP in an existing ORACLE_HOME. You should create a new home otherwise the modules may conflict with other products.
andy

Sampled Runstats

Similar Messages

Maybe you are looking for