Samples request(XLM & DropDown)

ALL
Can anyone please provide complete sample and step-by-step instruction of:
1.xlm populating form fields(I am unable to understand text explanation in help files).
when I follow, preview works, but saving to Static or Dynamic PDF fails.
2.Dependant dropdowns- multiple dropdowns each dependant on the previous, and finally filling a text field(s).
3.Copy excel column and pasting to dropdown Palette value ADD(+).
help file says to copy past, but
-Allan

Kyle
We appreciate the feedback. We will evaluate customer feedback and consider some of the requests for future versions of Photoshop. It would be great if you could post your feature requests to the feedback link at http://feedback.photoshop.com. It may allow it to be heard better as this is primarily a forum for issues with the Photoshop CS6 beta.
Thanks,
Pattie

Similar Messages

Some or all of the samples requested have not yet been acquired?

Hi,
I'm running the labview codes (8.5) on Mac platform. The Daq part number is USB-6211. Here are more details:
Mode: differential, continuous sample
Samples per channel: 250,000
Sample rate: 250 kHz
Channel: A1, A9
The data acquisition goes well in the first hour and suddenly it shows error-200284, Some or all of the samples requested have not yet been acquired. The timeout is much higher than samples / sample rate, which is 100 s. Is anyone can help me with this? I attached the labview codes.
Attachments:
Screen Shot 2012-10-31 at 6.20.22 PM.png ‏265 KB

1. As said, you should not be using the Run Continuously button. Use a while loop to acquire your data. Setup the task before the loop and close it out after the loop.
2. When you have the while loop, put a wait in there (1 second might be good). This will help avoid the timeout issue.
3. Propagate your errors. Have the while loop stop on the error or your stop button. Use the Simple Error Handler at the end.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

MSI sample request?

Hi,
Just wondering if any mods or admins could let me know how or who should i contact in MSI to request a sample for testing / reviews, at SPCR been tracking a lot of GTX750ti and MSI seems to have one of the best design in cooling in terms of noise. I personally would love to see SPCR review it to backup other sites that have placed this card and one of the quietest in the market, but not sure how to continue?
Thanks for your time,

I would recommend to contact MSI and ask to be contacted by their Promotions or other applicable department. Admin and moderators here are all non MSI employees, and this is a non official MSI user to user support forum.
> How To Contact MSI <

Need Sample Request for Proposal(RFP) for Weblogic Server

Hi,
I need Request for Proposal (RFP) document of Weblogic server 11g preferably. please guide.
Regards,
Noman

I encourage you to contact your local account team. Depending on your location, you should be able to find out that is by using the support sales number.
http://www.oracle.com/us/corporate/contact/index.htm

Sample requested - search view text

I am trying to do some analysis of a database that I have inheritted. Does anyone have some pre-written SQL that will search the text of a view for a particualr table name.
Sorry iof this is easy in 8i or up.... haven't had to reverse engineer anything since O71

You can look in dba_dependencies to see which tables are used by a view.
Alternative you could spool SQL*Plus output to a file, and enter the commands
set long 20000 (any large number sufficient for the largest view text you need to see)
select text from dba_views where view_name like 'XXX%' ;
Then use any editor to search inside the spool file.

Bugs in BC CRM web service need to be fix (Server was unable to process request ERROR: A server error has occured)

I'm using the following code to retrieve order list is working fine but it give me an error Server was unable to process request ERROR: A server error has occurred when I trying to retrieve order total paid with same code: and the output when retrieve order total paid is [object Object]
var wsUrl = "https://mysite.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx?WSDL";
                      var RetrieveTotalPaidXML =
                      '<?xml version="1.0" encoding="utf-8"?>\
                      <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">\
                      <soap12:Body>\
                      <Order_RetrieveTotalPaid xmlns="http://tempuri.org/CatalystDeveloperService/CatalystCRMWebservice">\
                      <username>user</username>\
                      <password>pass</password>\
                      <siteid>111222</siteid>\
                      <orderId>112345</orderId>\
                      </Order_RetrieveTotalPaid>\
                      </soap12:Body>\
                      </soap12:Envelope>';
                       $.ajax({
                        type: "POST",
                        url: wsUrl,
                        Host: "mysite.worldsecuresystems.com",
                        contentType: "application/soap+xml; charset=utf-8",
                        data: RetrieveTotalPaidXML,
                        dataType: "xml",
                        success: processSuccess,
                        error: function(){alert("Error: Something went wrong");}
                       function processSuccess(ResData) {
                       var RetrieveTotalPaidParse = $.parseXML(ResData);
                       var $xmlRetrieveTotalPaidParse = $(RetrieveTotalPaidParse);
                       var $Order_RetrieveTotalPaidResult = $xmlRetrieveTotalPaidParse.find('Order_RetrieveTotalPaidResult');
                               $Order_RetrieveTotalPaidResult = $(this).find('Order_RetrieveTotalPaidResult').text();
                               $('#RetrieveTotalPaidResult').text(Order_RetrieveTotalPaidResult);
I think there a bug in BC CRM Web Service when trying to make a request for Order_RetrieveTotalPaid using soap need to be fix

Perhaps it would be good to update the sample request as shown on the Developer reference page for this method (and, actually ALL of the SOAP samples)
The sample shows siteid (all lower case)

How to pass authentication token with the request. Error in executing

Hi,
I am trying to do a service call. This service is provided by a third party. I used SOAP UI tester to test the service and it gives proper response for a request.
I tried to create a client proxy and execute the method call, but it fails. In SICF recorder, I found that the request that goes into the service does not contain the authentication token. But in the SOAP UI tool when I input the WSDL file, it created a sample request, with authentication token in header section.
But the proxy class generated in the system, contains a input structure, which does not have this authentication structure in it.
Please guide me if there is any different method used to pass this authentication information. The structure of authentication structure is
<web:licenseKey>?</web:licenseKey>
        <web:password>?</web:password>
        <web:username>?</web:username>
I thought that this authentication information should be given in settings of logical port. But the logical port has only user name and password. There is no place holder for License key.
In summary: My query is that, there is no structure generated for SOAP header where I can pass authentication information, hence the request that goes into the service from SAP does not contain the authentication token. This results in a error non-soap message/error type 500.
Sample request that worked in SOAP UI tester is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://webservices.smc.com">
   <soapenv:Header>
      <web:AuthenticationToken>
         <web:licenseKey>XYZA</web:licenseKey>
        <web:password>ABC123</web:password>
        <web:username>suresh<AT>gmail<DOT>com</web:username>
      </web:AuthenticationToken>
   </soapenv:Header>
   <soapenv:Body>
      <web:isReady/>
   </soapenv:Body>
</soapenv:Envelope>
The request that goes out of the SAP system does not contain, the AuthenticationToken part.
Thanks and best regards,
Suresh.

You would need to write a webservice handler for your physical data service to implement the security.
http://download.oracle.com/docs/cd/E13162_01/odsi/docs10gr3/datasrvc/How%20To%20Create%20SOAP%20Handlers%20for%20Imported%20WSDLs.html

"Data Samples Overwritten before being Read" Error?

I have been working on this issue for over 3 weeks, I am getting an overflow error (Data overwritten before read), and I can't seem to get rid of it. I tried sevral suggestions, but still can't get rid of it. I am using two counters Gated by PFI7 and PFI4 to measure RPM. Ctr1 is Once Per Rev counter, and Ctr0 reads time reference at every edge. In our application, we average RPM after certain # of Revs, say every 100 Revs, we average them and we get an RPM reading. But the problem is before the averaging, the buffer seems to occur with speed exceeding 1000 RPM which is not nearly close to what we are looking for. I am using 16E-4 series and it supposed to handle high RPM ( I am looking for RPM at around 5000. I appreciate any feedback or suggestions on this issue, or a way may be I can handle the buffer to make it stop overflowing. Here is a snipet of the code:
DAQmxErrChk (DAQmxCreateTask("Counter Task1",&taskHandle[1]));
DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle[1],"Dev1/ctr0","Counter0",DAQmx_Val_Falling,0,DAQmx_Val_CountUp)); // Counter 0
DAQmxErrChk (DAQmxSetCICountEdgesTerm(taskHandle[1],"Dev1/Ctr0","/Dev1/20MHzTimebase")); // Sets 20MHz as source clock
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle[1],"/Dev1/PFI7",40000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,10000)); // using PFI7 as gate
DAQmxErrChk (DAQmxCreateTask("Counter Task2",&taskHandle[2]));
DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle[2],"Dev1/ctr1","Counter1",DAQmx_Val_Falling,0,DAQmx_Val_CountUp)); // Counter 1
DAQmxErrChk (DAQmxSetCICountEdgesTerm(taskHandle[2],"Dev1/Ctr1","/Dev1/20MHzTimebase")); // Sets 20MHz as source clock
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle[2],"/Dev1/PFI4",40000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,10000)); // using PFI4 as gate
DAQmxErrChk (DAQmxStartTask(taskHandle[1]));
DAQmxErrChk (DAQmxStartTask(taskHandle[2]));
DAQmxErrChk (DAQmxReadCounterU32(taskHandle[1],360*RevsToAverage,TimeOut,TimeBuffer,BufferSize,&NumberReadOnTimeCounter,NULL));
DAQmxErrChk (DAQmxReadCounterU32(taskHandle[2],RevsToAverage,TimeOut,OncePerRevBuffer,BufferSize,&NumberReadOnOncePerRevCounter,NULL));
Reading Counter0 is producing BufferOverflow error, I did try doubling the BufferSize even 4X, it didn't help. So, I making the buffer for 72000 samples for example, so it gets the 72000 samples requested in the first iteration of the loop, but when it comes in the next iteration, I don't think the buffer is empty. I do free up the memory on the way out from each iteration too, I am wondering if there is any addiotional housekeeping that I have to dod for the buffer, as I thought NIDAQmx takes care of the flushing.
Thanks for your feedback

Hi NewBe,
Thank you for posting on the National Instruments forums.
Is this the code that you are using in your application? One thing that I see off hand is that you are setting up and starting the task, then reading channels, but there is not stop or clear. Do you have a loop around your read section of code? You should not be configuring or starting the task after you do your read. If you want to do that, then make sure you have a close or clear task, depending on if you want to restart the task or reconfigure the task.
Another thing you can try is to for the numSampsPerChan to -1, which reads all of the data from the buffer each time you call the read function. If that fixes your issue, then it means that you are not reading off of the buffer fast enough so it fills up and you get that overflow error.
Please let me know what you find after trying this.
Thank You,
Nick F.
Applications Engineer

Web Service Request Xml

Hi,
I have an web service deployed. I wanted to write a client which will show me an sample request xml for any particular operation. Is there any way by that we can generate the request xml by querying the WSDL file.
Thanks.

I have used XML BEANS option for generating client in my webservvices. In that there is
System.err.println(document.xmlText()); which is basically a request Object for calling stub.
Any way there should be option to get XML text in most of the clients (client types).
Secondly for knowledge purpose if you want that XML then you may even try with default test utility provided in ECLIPSE.

SOAP HTTP header in SOAP request

Hi,
How to add the soap HTTP additional header in the SOAP request?
I want to add the headers not through coding. I want to add it manually.
I can able to add the HTTP headers through SOAPUI. But i need to add the same inside the request.
Could someone please help me?

I am sending the SOAP request through SoapUI.
Here is the sample request which i have used.
<?xml version="1.0"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:req="http://requisition.api.newscale.com">
<soapenv:Header>
<req:AuthenticationToken>
<req:Username>***</req:Username>
<req:Password>***</req:Password>
</req:AuthenticationToken>
</soapenv:Header>
<soapenv:Body>
<req:getRequisitionStatus>
<req:loginUserName>***</req:loginUserName>
<req:requisitionId>123456</req:requisitionId>
</req:getRequisitionStatus>
</soapenv:Body>
</soapenv:Envelope>
Here i have to add the additional HTTP header with this request.

Access request form fields changing if request is self or other

Hi SAP experts,
When open a new Access Request all the fields from the EUP work as expected with designated mandatory fields and visible fields (attachment "AC other") but for some reason when I change the "Request For:" dropdown to some other value (in this example "Self") all the fields become visible and Mandatory disappears (attachment "AC Self") what can I do to correct this behavior?
Note: If I assign the default value as "Self" and then change the field to "Other" I get the same results (all visible fields) so is something that happens when changing "Request For:" dropdown.

Hi Jonathan,
Can you check webdynpro component : GRAC_UIBB_ACCESS_REQUEST once because i think there might be code written to hide fields in onselect( ) action of request type.
PFB the snapshot for reference.
If not, pls check WDDOINIT( ) method of view V_SELECT_USER as shown below
PS : Compare your code with the attached file code.
If still the issue exists, Pls refer to this note : 1670922.
Hope this helps you.
Thanks
KH

IProcurement Non Catalog Request Type Field

Greetings to All,
Currently, having an issue in iProcurement. Under Shop-Non Catalog Request, there is an option to have "Request Type" field to be available.
This field and LOV is not showing up.
Per iProcurement Implementation Guide Release 11i Part No. A85361-05 December 2004
Specifically:
Section 4-52
Page 158
This is section describing "Setting Up Non-Catalog Request Templates"
There is a 'Request Type' dropdown at the top of the page, just above 'Item Type'
Request Type is not coming about.
Is there a smart form setup / preference or a Profile Option value that controls this feature.
Any help would be greatly appreciated.
Thanks

You are right Mr. CK..
If you check stores --> Smart Form --> Personalize "Default Item Information", you will find ${oa.NonCatalogRequestVO.IsTemplateBased} inside the personlization form.. It indicates "Request Type" is dependant on a template i.e. non-catalog request template.
Thanks for your answer.. Indeed it is helpful.
Regards,
S.P DASH

Visual Studio Integrate REST Api - WIQL request returns status 400 (Bad Request)

Hi,
I'm attempting to submit a WIQL (Work Item Query Language) request to the Visual Studio Online REST api but receiving a status code 400 (Bad Request).
I'm using the sample request of the first example "Run a query" of the reference documentation listed here: http://www.visualstudio.com/en-us/integrate/reference/reference-vso-work-item-wiql-vsi
I've taken the sample request: https://fabrikam.visualstudio.com/DefaultCollection/Fabrikam-Fiber-Git/_apis/wit/wiql?api-version=1.0-preview.2 and substituted "fabrikam" with our account and "Fabrikam-Fiber-Git" with our team project
name.
I've used the exact same query listed for the sample request:
"query": "Select [System.WorkItemType],[System.Title],[System.State],[Microsoft.VSTS.Scheduling.Effort],[System.IterationPath] FROM WorkItemLinks WHERE Source.[System.WorkItemType] IN GROUP 'Microsoft.RequirementCategory' AND Target.[System.WorkItemType]
IN GROUP 'Microsoft.RequirementCategory' AND Target.[System.State] IN ('New','Approved','Committed') AND [System.Links.LinkType] = 'System.LinkTypes.Hierarchy-Forward' ORDER BY [Microsoft.VSTS.Common.BacklogPriority] ASC,[System.Id] ASC MODE (Recursive, ReturnMatchingChildren)"
Couple of things that I've tried:
1. I've tried both "api-version=1.0-preview.2" and "api-version=1.0-preview.1"
2. I've left out the project name from the request url: Based on the query format listed in the example "https://{account}.visualstudio.com/defaultcollection/[{project}/]_apis/wit/wiql?api-version={version}" I'm assuming that the wrapping of the
project section in the url in square brackets ([{project}/]) indicates that this section is optional.
3. I've tried a simpler query:
"query": "Select [System.WorkItemType],[System.Title],[System.State],[Microsoft.VSTS.Scheduling.Effort],[System.IterationPath], [Microsoft.VSTS.Common.BacklogPriority] From WorkItems"
Any help would be greatly appreciated.
Kind Regards,
Morné

Hello Morne,
Visual Studio Integrate forum is for questions about Visual Studio extension development. Yours seems to be about Visual Studio Online REST API to query something. Maybe
Visual Studio Online forum is better, I'm not sure.
I move it to [where is this forum for ...] forum, where the moderator will direct you to the right forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot submit route requests using lat/long to Oracle RouteServer

I have version 10g of Oracle RouteServer running under OAS, and a backend 10g database loaded with some NAVTEQ data. The route server handles ordinary requests with un-geocoded addresses -- most of the time. Whenever I attempt a route request using latitude and longitude, even using the sample requests at http://<myhost>/routeserver/route_requests/lat_long.html, I get the following response:
<RouteServerException>
[RSE-0206: Unexpected output format from Geocoder!!!]
</RouteServerException>.
What does this mean? How can the Oracle-provided sample request fail?

Here's the XML for the original lat/long routing request to the Oracle RouteServer.
<?xml version="1.0" standalone="yes"?>
<route_request id="8"
route_preference="shortest"
road_preference="highway"
return_driving_directions="true"
distance_unit="meter"
time_unit="second"
return_route_geometry="true">
<start_location>
<input_location id="1" longitude="-122.39382" latitude="37.79518" />
</start_location>
<end_location>
<input_location id="2" longitude="-122.4054826" latitude="37.7423566" />
</end_location>
</route_request>
When I run a reverse geocoding query using the input location coordinates in the underlying database with
SELECT SDO_GCDR.REVERSE_GEOCODE('ODFUSER',
SDO_GEOMETRY(2001, 8307,
SDO_POINT_TYPE(-122.39382, 37.79518, NULL), NULL, NULL),
'US') FROM DUAL
and
SELECT SDO_GCDR.REVERSE_GEOCODE('ODFUSER',
SDO_GEOMETRY(2001, 8307,
SDO_POINT_TYPE(-122.4054826, 37.7423566, NULL), NULL, NULL),
'US') FROM DUAL
I get
SDO_GEO_ADDR(0, SDO_KEYWORDARRAY(), NULL, 'THE EMBARCADERO', NULL, NULL, 'SAN FRANCISCO BAY AREA', 'SAN FRANCISCO', 'CA', 'US', '94111', NULL, '94111', NULL, NULL, 'THE EMBARCADERO', NULL, 'F', 'F', NULL, NULL, 'R', 1, 916027581, '', 1, 'DEFAULT', -122.39382, 37.79518, '????1141114??404?')
and
SDO_GEO_ADDR(0, SDO_KEYWORDARRAY(), NULL, 'FLOWER ST', NULL, NULL, 'SAN FRANCISCO', 'SAN FRANCISCO', 'CA', 'US', '94124', NULL, '94124', NULL, '21', 'FLOWER', 'ST', 'F', 'F', NULL, NULL, 'L', .596104898, 199223581, '', 1, 'DEFAULT', -122.40546, 37.7424313, '????4141414??404?')
respectively. I'm fairly novice at reading this, but it appears that the reverse geocoding was successful. That makes it all the more puzzling as to why the routeserver, using the same data source, returns the following (in my browser window - IE7, FF 3.0.12, Chrome 2.0.172.33):
<RouteServerException>
[RSE-0206: Unexpected output format from Geocoder!!!]
</RouteServerException>
By the way, the database version is 10g Enterprise Edition Release 10.2.0.4.0.
Edited by: lowlyscrub on Jul 23, 2009 11:21 AM

Plz send me this code

my requrement is on run time how to call all tables in dropdownlist
2)if i select particular table on 2nd dropdown display all the columns of that table
3)if i select particular column in grid show the data
4)plz give me replay on
[email protected]

Hi,
Please check if there is one available project or sample on Microsoft’s site.
Here is the link
https://code.msdn.microsoft.com/windowsapps
You can filter some conditions what you want or just put some keywords in search engine. If there is no any project meet your requirement, please redirect to submit
a sample request to http://code.msdn.microsoft.com/windowsapps/site/requests.
In addition, I am sorry to tell you that we don't provide email support services.
As IWolbers said, this forum is meant for help with specific questions. If you have issues about C#, please feel free to post in this forum next time. Thanks for your understanding.
Also take a note of the following thread.
Where
is the correct place to make posts regarding ASP.NET, SQL or another topic that is not related to C#?
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Samples request(XLM & DropDown)

Similar Messages

Maybe you are looking for