Sampling lot not reflecting in inspection Lot

Hi
We set up the QM master data (QI info- record / QI PLAN / QI Inspection / QI sampling schema / inspection chars / Dynamic modification rule etc..
The inspection lot was creating automatically . I coudn't find any samples in the inspection lot ( out of 50 - GR ,we are expecting 1 samples.
Why and how to correct it ?
Thanks , Any help will be highly appreciated
JJ

Hi
I assume you have sampling procedure which is assigned to all MIC in the inspection plan
Check the lot status? if if is CRTD
Check your inspection Plan Usage and Inspection type Usage
If both are same then your inspection will become REL when u make GR
sample size will be automatically calculated.
already created lots - QA02 just clickon sample --ur lot status will changed to REL
THanks
Sami

Similar Messages

Process order batch number not reflecting in corresponding inspection lot

Hi QM gurus,
I am working on inprocess inspection for production. I am creating process order during that time batch no is generated automatically by the system. Now process order is released during this time Inspection lot generated with inspection type 03. Now the problem is in the inspection lot, process order batch number is not reflecting. I have checked all the master data seetings. All seems to be fine. what could be the problem. any settings missed can anybody help me out.
Thanks
Vinameath

Hi Vinameath,
Go to the Master Recipe (C202) of this Process order/Material. Go to Recipe Header tab and click on the Quality Management Header button.
Now,go to the Partial Lot Assign field and maintain the value " 0 Partial Lots not supported " and save.
Then create a new process order and in all probabilities, the batch should appear on the in-process inspection lot.
Hope this helps you!
Regards,
Vinodh

Sampling Point / Storage Location in Inspection Lot

Hello,
We are looking for sampling point / storage location entry in Quality Certificate while dispatching it to customer, but these two fields are not available in inspection lot. Is there any possibility of making either of these two to enter while creating manual inspection lot so that same can be used as a link for the purpose of dispatch of Quality Certificate with the Sampling point / storage location information to the Customer.
Regards,
Puneet

Hi
Use User Exit
QPL10004 in QA01
This enhancement allows you to display or change additional data on the
screens for the inspection lot transactions.
maintain Sampling point / storage location here
Regards
Sujit

Sampling Lot & Inspection Lot.............

Hi there ,
Can any one please tell me that whether there is any diffrence between the sampling lot & the inspection lot.......
As per my understanding the sampling lot is the subset of the inspection lot which is created on the basis of the sampling procedure ........
Please let me know whether am I right or not ?
Thanks
Kaushik

Hi,
For Eg: You can do inpection while you receive a raw material or when you do GR after production.
Here the stock does not directly move into the unrestricted use type, instead it a inspection lot is created for the stock qty.
This inspn lot in inspected based on the inspn characteristics & the sampling procedure.
Sampling can be done using fixed lot, eg. 1 pc per lot or 100 % inspn.
Regards,
SDS

Displaying inspection lot (not posted in inspection stock) as mrp element

Hi guys,
we are implementing SAP QM. Our problem is that we are not using the inspection stock because we are also implementing a non-sap warehouse system. So we are not posting our goods receipt which have to be inspected in inspection stock but the inspection lot for the material is generated. Now we want to display this inspection lot in the transaction MD04. We suspect that we have to injoin in coding which we want to avoid. Has anybody of you experience or information with this issue? If yes I would appreciate your help a lot.
Thanks for your help and answers in forward. Of course I reward all answers with points.
BR,
Bernd
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder

Hi Ymreddy,
thanks a lot for your answer. Unfortunately the situation is as i had explained. We are implementing SAP QM and we also have to link a external warehouse-management-system with our SAP-system-landscape. So if we want to post the goods receipt, which has to be inspected by quality department, in our warehouse manangement system, we cant post anything if the goods are on inspection stock. Goods in inspection stock can only be posted out with usage of the UD (usage decision). But the goods receipt place in reality is too small for waiting of this decision from quaility and so the goods have to be posted in the warehouse. Because of this situation we can not use the inspection stock. If we would use SAP WM we would not have this problem. We handle this problem in using restricted batches for the goods receipts. So we can post the GRs in the warehouse system but you can not use it if the usage decision is not made. I hope i have made the situation a bit clearer to you now.
My problem now is, that the material requirements planning team wants to see in MD04 the goods which are in a inspection lot as you can see it in standard if you use inspection stock for these goods. But if the goods are not posted in inspection stock with the inspection lot you can not see it in MD04, unfortunately. My question is, are there any user exits, customizing settings or any experiences/ideas of you to handle this problem?
I appreciate your help a lot. So thanks for your help in forward.
BR,
Bernd

Sample size calculation for Source Inspection

Dear Gurus,
I have an issue regaring sample size calculation for Source Inspection.
I created a PO for 500 nos.
The sampling procedure assigned in the Quality Plan is %age based (10%).
When Inspection lot is created, system is caluating the Sample size as 500 and not 50.
Moreover, when I go to Result Recording, the Inspection qty for the MIC is shown as 1. If the system is calculating sample size as 500, then the inspection qty for the MIC should also be 500. Moreover, the sample size should be 50 only.
Please provide your inputs on this.
Regards,
Nitin

Thanks Sujit!
Your are correct. It works in the same way as u told.
Assigned you the points for the answer.
Closing the thread.
Regards,
Nitin

Changes made in LR 1.3 to psd files are not reflected in ACR 4.3, Bridge 2.1.1.9, or Photoshop CS3

I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
If anyone has any help - I would greatly appreciate it!
Thanks,
Ann
System=
160 GB hard drive
Intel core duo T7500
2 GB Ram
Windows Vista 32 bit
ACR 4.3
LR 1.3
Bridge 2.1.1.9
PS CS3 (updated last week)

I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes.

Photo name not reflecting in iPhoto

Hi everyone... Forgive me for this question while I am on a learning curve w/ my Mac. I have a question about photo names not reflecting in iPhoto. I recently loaded some pictres from a compact flash card, and iPhoto started and pulled them right in. I went to the Finder, navigated to Pictures, then the iPhoto library. I found the pictures, and used Automator to change the name of the photos. I opened iPhoto, and went to the Album I created, and all the photos have the old name as given by my camera. I cannot find what I am doing wrong. Thanks for any help. Chris

Chris,
You would open Image Capture (in your Application folder) and set your preference there (weird, huh!)
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.
Lori

SAP BI CKF,RKF descrptions are not reflecting in the universe

Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh Ambati

Hello Jagadeesh,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Master data changes not updated in Inspection Plan- QP01

Hi
We created all the QM master data . After that we did some changes in inspection chars and in the sampling master data.but the values are not reflecting in the Inspection plan . How to update the changes in the inspection plan. We are trying to find indIvidual as well as Mass update
Any input will he highly appreciated
Thanks
JJ

Dear JJ
Another easy method will be maintaining MIC as referenced mic. instead of maintaining it as complete copy model you can make it referenced. any changes in the mic can be updated automaticalyin the inspection plan using the referenced functionality.
The issue being wherever the mic goes will be changed,
Regards
gajesh

[svn] 4377: Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey

Revision: 4377 Author: [email protected] Date: 2008-12-22 16:16:25 -0800 (Mon, 22 Dec 2008) Log Message: ----------- Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey QA: Yes Doc: No Checkintests Pass: Yes Details: * Regression due to some refactoring of user-agent handling that was failing to set up defaults if no explicit <properties> were defined for the <channel-definition>. This meant that for IE, no kick-start bytes were being pushed down the streaming connection at setup time... Ticket Links: ------------ http://bugs.adobe.com/jira/browse/BLZ-292 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/endpoints/BasePollingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/util/UserAgentManager.java

Hi,
Thanks for your feedback!
This feature has been going through a lot of changes with the BlazeDS and Flash Builder builds.
We request you to pick up the BETA2 build of Flash Builder and BlazeDS 4.0.0.10654, hopefully you should see things working fine.
Kindly let us know if you still encounter problems.
Thanks,
Balaji
http://balajisridhar.wordpress.com

The local date format is not reflected in firefox

Hai all
I want to display the date according to regional setting of the client user in my jsp file.The following code works fine in IE i,e if i change the regional setting it is reflected but firefox does not reflect the change.
What is the problem.Is it with firefox/my jsp code.Can any one help me
Here is my codeDate now=new Date();
          Locale currentLocale=request.getLocale();
       DateFormat df2 = DateFormat.getDateInstance(DateFormat.MEDIUM,currentLocale);
      String s2 = df2.format(now);Have a nice day
Aniesh U.K

Hai
Thanks for ur reply.
I am using firefox 1.5.1.Its is not reflecting the changes.I mean changing the regional setting in the control panel.But If i change the language option in the browser then the changes are reflected.So is it problem with mozilla.
Thanks a lot have a nice day.
Aniesh U.k
Have a nice day

I purchased a Pixma Pro-100. My prints do not reflect the edited images from CS6/LR5.

I just got a Canon Pixma Pro-100 printer. I'm running CS6 and LR5. My monitors are calibrated, my color space is Adobe RGB (1998). I want the Photoshop /LR to manage my color. I (believe) am using the correct profile for the Canon paper (Pro Luster). However, my prints do not reflect the edited versions I am viewing on my monitors. The colors are darker, dull, a bit on the reddish side, and not as vivid as what I am expecting. Is there anyone out there who can guide me to the proper way to set the up my printer and color space? I this is very confusing to me.

You don't need any additional gadgets to set up your monitor(s) and the printer. Mostly you will just frustrate yourself and waste a lot of ink and paper. Stop wasting your time with them, too.
You do need to get three things set carefully. You need the brightness, the contrast and the grey-scale set right for the printer.
Big point to remember you are dealing with two completely different types of color. One is light and the other is dyes. They will never match exactly except for maybe one or two colors at a time. I generally shoot for flesh tones as that is what people notice mostly.
Always check the details and never let the printer do any color managing. All Canon printers I have worked with have a reddish bias. You can not or at least it is very difficult to get rid of it. Canon engineers seem to prefer a warm tone in their printers.
I curently use three of the Canon Pro printers form the 9000, 9500 II amd the 100. All are great printers. But right now what you are seeing and what you are sending to the printer is different. These need to match or you need to know what to adjust in PS to make them match. Don't use LR to print, it isn't as good as PS and it will be different. If you must, stick to either/or but not both. I prefer PS.
Always shoot RAW and use ACR to convert in either LR or PS but I always print from PS.
Let me know how you get along.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

VAT & CST Not reflecting in Pric Proc

Hi All,
Iam using TAXINN, Copied ZINFAC to KINFAC,
I have created JIVP and JIVC for VAT and CST,
I have maintained Condition Records for JIVP and JIVC.
Both these condition records are not reflecting in my sales order, i.e. the records are not coming.
Please help me in this regard
Siva Narayana.B

Hi,
Please goto Contion tab select ur condition record .
Click on analysis tab at the bottom .
U will find lot of condition type , select the one for which u want to do analysis .
click on it u will find the data which is missing .
Yellow mark suggest u have not maintained that data please maintained that and check again
Hope u can solve ur problem urself

DataGrid not reflecting changes after INSERT into Table. Delete from Table does.

Wow, it's been a while.
Hope you guys can help.
This is my DataGrid:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
<DataGrid.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="BorderThickness" Value="0"/>
</Style>
</DataGrid.CellStyle>
<DataGrid.Columns>
<DataGridTextColumn x:Name="NodeColumn" Binding="{Binding node}" Header="VS Number" Width="*"/>
<DataGridTextColumn x:Name="SerialColumn" Binding="{Binding serial}" Header="Serial Number" Width="*"/>
<DataGridTextColumn x:Name="NameColumn" Binding="{Binding name}" Header="Asset Name" Width="*"/>
<DataGridTextColumn x:Name="TypeColumn" Binding="{Binding type}" Header="Asset Type" Width="*"/>
<DataGridTextColumn x:Name="_dateColumn" Binding="{Binding date}" Header="Date Allocated" Width="*"/>
<DataGridTextColumn x:Name="PoColumn" Binding="{Binding po}" Header="Purchase Order" Width="*"/>
</DataGrid.Columns>
</DataGrid>
This is where I add a new Row to the Table:
Private Sub Button_Click_1(sender As Object, e As RoutedEventArgs)
Dim cbblocation As ComboBox = Me.FindName("LocationComboBox")
Dim row As DataRowView = DirectCast(cbblocation.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
Dim cbbtype As ComboBox = Me.FindName("comboBoxType")
Dim cbbtext2 As String = cbbtype.Text
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.AddNewAsset(cbbtext, txbSerial.Text, txbName.Text, cbbtext2, Date.Today, txbPO.Text)
node = cbbtext
Dim mp As New MainPage
mp.RefreshGrid(node)
Me.Close()
End Sub
The RefreshGrid method:
Public Sub RefreshGrid(node As String)
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.FillByNode(RETAILISOAMDDataSet.tableAssets, node)
Dim TableAssetsViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("TableAssetsViewSource"), System.Windows.Data.CollectionViewSource)
Dim be As BindingExpression = BindingOperations.GetBindingExpression(TableAssetsViewSource, CollectionViewSource.SourceProperty)
be.UpdateTarget()
End Sub
And this is what I use to delete a row from the table (and without doing anything special, the DataGrid auto-updates with the changes):
Private Sub Button_Click_4(sender As Object, e As RoutedEventArgs)
If TableAssetsDataGrid.SelectedIndex = -1 Then
MsgBox("You have selected nothing to Delete!", MsgBoxStyle.OkOnly, "Nothing Selected")
Else
Dim dgv As DataGridTextColumn = Me.FindName("NodeColumn")
Dim row As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText As String = row.Item("node")
Dim dgv2 As DataGridTextColumn = Me.FindName("SerialColumn")
Dim row2 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText2 As String = row.Item("serial")
Dim dgv3 As DataGridTextColumn = Me.FindName("NameColumn")
Dim row3 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText3 As String = row.Item("name")
Dim dgv4 As DataGridTextColumn = Me.FindName("TypeColumn")
Dim row4 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText4 As String = row.Item("type")
Dim dgv5 As DataGridTextColumn = Me.FindName("_dateColumn")
Dim row5 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText5 As String = row.Item("date")
Dim dgv6 As DataGridTextColumn = Me.FindName("POColumn")
Dim row6 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText6 As String = row.Item("po")
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.RemoveAsset(dgvText, dgvText2, dgvText3, dgvText4, dgvText5, dgvText6)
Dim cbb As ComboBox = Me.FindName("cbbLocation")
Dim row7 As DataRowView = DirectCast(cbb.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
RefreshGrid(cbbtext)
End If
End Sub
--------- End of Edit
It is bound to a Dataset which gets it's data from a SQL Database.
Loading the Data and Filtering the data based on certain conditions work 100%. The problem I am having is as follows:
I have a form on the Page that takes input and inserts a row into the Database. When this happens, the DataGrid won't automatically reflect the changes (even if I recall the Fill Method of the Dataset). No matter what I do, I have to refresh the entire page
and THEN Fill the Dataset to see any changes.
This is what strikes me as odd...
When I do a delete row operation on the Database (Custom Method on the Dataset with conditions), and just Fill the Dataset again (without doing anything special), the row deletes and the changes is reflected IMMEDIATELY.
What am I doing wrong here? Why would Delete Row reflect the changes on the DataGrid but no Insert Row?
Thanks in Advance.
(P.S. I am very rusty with my developing skills, I haven't done this in YEARS)

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

Sampling lot not reflecting in inspection Lot

Similar Messages

Maybe you are looking for