Samson Go Mic Is Not Installing

HI, I have a Samson GoMic, It says on their website that the native drivers on your computer are enough to make the usb mic work,but it doesnt. I have tried to update driver ,but it says that there is no available driver. I have an HP Envy 6Gb Windows
8 m6 Sleekbook , ive seen forum posts that say GoMic Really doesn't work on Win8, you have to upgrade it to 8.1. What I wanna ask is , Do I have any chance of getting this mic to work at all, and Do I have to Upgrade my laptop to 8.1? I really need
your help, Thanks.

Has anyone found a solution either on Microsoft or Samson's website? This problem seems to exist for Windows 8 and 8.1. I'm using Windows 8.1 and I'm having problem where Windows 8.1 tries to install the driver (it's "plug and play")
and the device is not recognized. In the Devices and Printers, the Samson GoMic has a yellow exclamation mark. If you right-click, you have the option to Troubleshoot but this does not result in a solution. Samson does not have drivers because
they state the device should be recognized. The Samson GoMic works on my Windows 7 computer.

Similar Messages

Suyin Webcam "Not installed or in use by another" error on windows 7 64 Home Premium. I have tried all advice found, nothing works. Can you help me?

Hello,
I have an integrated webcam that has not been working for approx 6 months! I have updated the Suyin driver/software from Gateway.com. It installs with no problems. I have the webcam icon on
my toolbar and I am able to open the help menu for the software and directions on how to use the camera. However I can't open the preview window and get an error message "camera not installed or in use by another." In device manager, it shows 1.3
M webcam under imaging devices with no errors and the driver being updated. The driver is not Suyin but a Microsoft usb video driver
6.1.7601.17514 from 6/21/ 2006? I have done driver scans from multiple sites that show the webcam driver is up to date?
I have a NV53A Gateway laptop with an AMD 4200 Radeon HD Graphic Card which is updated from AMD.com with a 13.1 Cataylst Vision Engine Control Driver for my AMD VGA card. The webcam worked before with AMD updates such as 12.6.
I have windows 7 64 Home Premium SP1 Processor
AMD Phenom(tm) II N830 Triple-Core Processor, 2100 Mhz, 3 Core(s), 3 Logical Processor(s)BIOS Version/Date
Gateway V2.04, 10/25/2010
SMBIOS Version 2.6
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Hardware Abstraction Layer Version = "6.1.7601.17514"
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.74 GB
Available Physical Memory 1.61 GB
Total Virtual Memory 7.49 GB
Available Virtual Memory 4.74 GB
DirectX:11
Device Manager Info:USB\VID_064E&PID_A219&REV_0215&MI_00
USB\Class_0e&SubClass_03&Prot_00
usbvideo{6bdd1fc6-810f-11d0-bec7-08002be2092f}\0000-driver key
\Device\00000087
000000A4
CM_DEVCAP_REMOVABLE
CM_DEVCAP_SILENTINSTALL
CM_DEVCAP_SURPRISEREMOVALOK
{9d7debbc-c85d-11d1-9eb4-006008c3a19a}-bus type guide
DevNode Status:
0180600A
DN_DRIVER_LOADED
DN_STARTED
DN_DISABLEABLE
DN_REMOVABLE
DN_NT_ENUMERATOR
DN_NT_DRIVER
USB\VID_064E&PID_A219\HF1315-S32B-OV01-VA-R02.01.05- Parent:usbvideo.inf:Microsoft.NTamd64:USBVideo:6.1.7601.17514:usb\class_0e
00FF2002- rank of installed driver
I hope I provided enough info for you to help me? Everywhere I go I have done what I read, such as uninstall, reinstall, update driver, download from inf file, go to gateway.com,etc...
I don't know if AMD is controlling my webcam? When I click on flash it states no webcam found, the mic is found though. Skype and other sites also say no webcam found. I don't know why I can't install Suyin through device manager?
The software installed is
UVC 0.6.47.1:VIDEO Web Camera
I have multiple registry entries for suyin from the download such as regedit 5.0 Suyin which by default has this error message in many languages? There is also a USB registry that flashes when installed and
a echo@ registry entry too. These are located in the folder in Windows/ Programs/86 under Video Web Camera. What has taken over my webcamera?????
I don't know if I need a BIOS update to fix this from gateway.com??? I haven't done that because I am unsure and don't want to make this worse. I do find at the gateway site the only update is the webcam
which is 1/21/11. The others are the same from 6/24/2010, which I already have. I bought the computer in 12/2010 new. The webcam was working in 12/13 , for I had a 2 year warranty and no issues . I think this is a simple fix but I am not an expert,
only good at following logical,proper instructions to fix an error.
I'd be grateful and shocked if anyone can help me. I have no viruses and have Norton 360 running all the time and done check-ups with Malware and Superspy.
I have another user on my computer which is myself but logged off. If I deleted the other user, would my webcam work or is it my registry, AMD??? I am sooooo frustrated !!!!!! I am confused why
device manger states no errors and driver sites find no webcam updates or errors, either. There is no Suyin driver in the driver store and the inf file won't install per device manager?
Thank-you for your time and if you are unable to assist me , please advice where to go. Please let me know if you need more information.
Kindly,
Victoria

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

I have a Mid 2009 Macbook Pro 13 with no restore disk; it has OS 10.8.4 I believe there is something wrong with the OS due to I can not install flash player to view Youtube videos and the when we plug in a Bose headset the sound out will work sometimes

I bough a used Macbook Pro mid 2009 that came with OS 10.8.9 it didn't have a backup restore disk with S/N W8******66D
When trying to view some youtube videos; a window would pop up saying "it needs adobe flash player is required for video play back get the latest flash player" but after downloading the file and during installation would have errors and will not installed.....tried to reboot and install again.....but still the same.
The othe thing I had noticed is when using a good Bose headset with mic the sound output would noticed the headset and then switch from headset to Internal speekers and headset.....thinking that there might be something wrong with the plug in port of the computer or the headset.....the headset works with no issues on my iPad so there must be something wrong with the computer.....tried to move the plugin around the port but no change....while the headset is plug in can hear a short clicking noise and the sound would get lost and back again......but with nothing plugin to the port there is no issue with the sound or mic.
Thanks for your feed back......it looks like I have two different issues one is a software issue and the outher is a hardware issue
<Edited By Host>

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Video Works but Mic Does Not

I have a Creative Livecam Socialize HD(VF0616) installed in my PC. My OS is Win7 Ultimate 64 Bit. The camera was working before but I have not used it lately. I upgraded my Skype but when I tested it with the camera, the mic did not work. The camera video and the speaker seemed OK but the microphone did not work. Any simple way to test the mic feature of the camera?

In Skype go to Tools -> Options -> Audio settings. What device do you see there selected as your Microphone? Is there more than one option available in the selection box? Can you see any respponse on the Volume bar when you make any sound?

Bluetooth headset's mic does not work

I have NB205-312BL netbook and bought Acoustic Research ARWH1 bluetooth headset.
I am able to pair it with the netbook easily. However, the mic does not work! Only audio playback works. I know it is not the fault of the headset because the mic works pretty well with a cell phone.
When I look at Device's properties, I see that the device is identified as a 'headset' but an audio-sink device.
The mic does not work even if I explicitly select "Bluetooth Wave" as the sound/voice input device.
The netbook runs Windows XP. It has the latest Toshiba Bluetooth software 6.40.xx installed on it.
Any help is greatly appreciated. Thanks.

First you need to get your keyboard fixed. The caps lock appears to be stuck.
What have you tried, and what symptoms do you observe? "Does not work" does not tell us much.

Speakers Hiss when Mic is not muted

#Speakers Hiss when Mic is not mutedi WinXP Pro SP3
Drivers 6.00.000.368
First problem
I have a Sound Blaster X-Fi XtremeGamer Fatalty Pro card and 7. speakers and I just noticed that the speakers will hiss when the Mic is not muted, if I mute the mic, than the hiss will go away, but soon as I unmute it, hiss is back.
Second problem
I been trying to get my mic working, I have a simple plug in play mic and it is plugged directly into the Mic plug at the back of the Sound card but I have to rise my voice very loud or tap the Mic for it to pick up any audio and even than, the sound output from me speaking or tabbing is very low.
Mic Volume is turned to max, boost is on, I've checked every option for Sound and the Mic and everything is set correctly, when I had Vista installed, the Mic worked without any problems.
I'm at a lost on what to do, I have re-installed the drivers many times to try to fix the issue, my only solution is to use my X-Fi Go and use headphones through them, but I lose all the benafits of having 7. sound when playing games.

Hi..yeah..can anyone help on this please..
im also experiencing the same problem..ive also tried realtek R249..
thanks...

Samson USB mic issue

Hi All,
I purchased a Samson USB mic C01U which is a pretty sweet mic. I used it USB once on my Mac Book Pro but only for a quick verse or two on a friends song.
I came back to my home MacMini and tried to get it worked and after setting up aggregate devices etc... got it going but after about 5-10 minutes the audio started to chatter and clip.
I fiddled with it alot. If I unplug it, plug it back in it works for another 5-10 then chatters.
So I figure its a driver or conflict problem.
Well the other day my new MacPro arrived. I installed Logic, setup the aggregate device and I suddenly have the same problem. No bad drivers or anything (trial software etc) But still I get 5 mins then chatter and clip.
Any thoughts? Anyone using USB mics with Logic Pro?
Thanks in advance.

I saw that thread albeit after I posted this. The thread address some technical issues but didn't give any opinions on the sound quality. I wouldn't expect too much from an $80.00 mic but I was wondering if it was at least a decent value.
I should have been more specific.

Sound Flower is not installed

Hi
I've donwloaded SoundFlower sofware but then in the taskbar (where the Volume is, on the top of the screen) I see this message :
SoundFlower is NOT installed.
So I cannot use it !!!!
How can I use it, does anyone have an ideao please ?
Thanks a lot !!

I confirm you andyBall_uk that you are "right" the beta version is far much better ....
....because everything works well now !!! So it is really needless to buy any mic.
It sounds like now the Windxxxxx Recorder and much better of course !!
I m impressed for the accurency of the iMAC Support Community
TO BE KNOWN MAC OS 10.8.4 users
THANK YOU VERY MUCH FOR YOUR HELP (and the guy at the AppleStore)

My logitech mic does not work with Audition anymore

My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
Go ahead and delete thread if you like.

The T61 internal mic does not work when docked

The internal mic does not work when docked. However works fine when undocked.
Does anyone know how to fix this?

I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.
I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype.

CIT200 Internal mic does not work??

I am using the CIT200 under WIndows 7. It connects fine to Skype and drivers are installed OK. When I call, the internal mic does not work (phone's internal speaker is fine), but when I plug in a headset, the headset mic (and speaker) works just fine. Does this mean the internal mic is physically damaged, or is there anything I can do software vise to get it to work?

Hmmm, well never tried to make the CIT200 software on a Virtual PC, but you can give a try and check if that solves your problem or not.

Line In 1 / Mic In not registering in windows xp 64 professio

Hello there all - i upgraded my OS to Windows XP Pro 64. I have a SoundBlaster Audigy 4 Pro.
i Installed the drivers using:?SBAX_WBUP2_LB_2_09_006.exe?the soundblaster is working, except that the Line In /Mic In is not registering. I can hear the microphone check through the computer speakers, which are a standard self powered Behringer Truth B2030A, but no programs read the sound. I have adjusted all the advanced audio properties on the Soundblaster in Windows, including making sure "What you Hear" is checked, "Line In/Mic" is checked, the volume levels are acceptable. Has anyone else had a similar problem? Any suggestions?i did not install the creative EAX program, only the SoundBlaster Audigy Drivers. thanksmatt

Try this:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=683

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp officejet 6100 eprinter will not install on windows 7 64bit

I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number: [edited by Moderator]
Product Number: VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution:
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback
close
close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OK

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

A few weeks ago I had to reinstall itunes on my PC because the latest itunes update did not install properly. Ever since doing that something called Mobile Me keeps popping up whenever I open email (outlook) and slowing it down. How do I remove MobileMe

A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it. I was able to reinstall itunes and it works fine including syncing with my ipod. However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program. This a nusance and really slows down getting to my email. From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes. I can't find a way to remove this MobileMe from my PC. I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it. Any suggestions on how this can be removed?

Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

Samson Go Mic Is Not Installing

Similar Messages

Maybe you are looking for