Samsung 205BW with MacBook Pro, lost resolution...

When arriving home after work I have a home station with an extra Samsung 20" 205BW external monitor next to my MacBook Pro 2.4 Intel Duo. The Samsung has always shown up in the System prefs>displays at 1680 x 1050 / 60 Hz... Taught a master class this weekend where they had an Epson projector. I connected to it for the class. This projector had a default resolution reset. Returning home and setting up this morning the highest resolution available for this Samsung monitor in System Prefs≥displays is 1440x900. Where did my higher resolution go? It was there before! Is there a reset that I am missing? Samsung's support is no help.
Message was edited by: rwstudio

Hey rw.
I have the same display and setup and my Macbook Pro (albeit 2.2) and exhibits the same issue.
Apple is aware of the issue and there's a Bug ticket open on it to resolve. There are quite a few threads on the subject here.
I know that doesn't help but I suppose it's good that there's a solution coming (hopefully)

Similar Messages

  • I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

    i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

    Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
    To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
    If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
    Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

  • Lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

    lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

    I'm not sure how this is an iTunes issue, but anyway, other than buying the apps from the Mac App Store (note that iDVD and iWeb are not available via the App Store), the only alternative is to call Apple support and give them the serial number of your Mac. They can usually sell you a new disk set for a reasonable fee.
    Regards.

  • Compatibility of Past-Years Cinema Display with Macbook Pro Late 2011, and other displays.

    Hello.
    I'm inquiring about the compatibility of Apple cinema displays from years past with Macbook Pro 15" Late 2011.
    For instance, will all Apple Cinema Displays from, say, 2008 onwards work with my mbook?
    They can be had fairly cheaply on the used market.
    What is the earliest model that will be compatible?
    I've never had an external monitor for my lappies, so I am very clueless. I know DVI is a common connection, but there is no DVI port on my lappie.
    I would also be very curious as to what would be suitable displays from other manufacturers, particularly Samsung and Dell.
    The size doesn't have to be big, 20-23 inch is fine, I am more worried about good resolution [no obvious pixellation]
    If a screen is big, but has good resolution that's even better of course, but I'm not ****-bent on a big thing.
    The mbook 15" screen is just a bit squashy for home use really.
    Thank you very much in advance for any advice.
    Feel free to link me to other threads as an answer, I have done a bit of searching around, but still confused.

    I have the same MBP and recently bought a 23" cinema display on Craigslist for $140.  It works great.  I had a display port to DVI adapter and it worked fine.  Built a stand to hold the laptop vertically so it's out of the way.  Don't know about older displays but anything with DVI should work fine.
    The screen size and resolution are great for photo editing.  I now have the best of both worlds, a display that rivals my wife's iMac and portability.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Samsung Monitor for MacBook Pro

    My husband just purchased a Samsung Monitor, model # 226BW for my MacBook Pro. The instructions for the monitor only refer to Windows with no mention of Mac OS X. Can this monitor be used with the MacBook Pro? My husband researched monitors that were supposed to be compatible with MacBook Pro and this one came up as one that would be. Thanks.

    That is completely normal behavior. How do you want to use the monitor?
    Most of what you want to adjust is in System Preferences -> Displays. If the display is on and connected, you get a separate control window on each monitor. You can control how the external display appears to connect to the laptop screen (right, left, above, below, etc.) You can also turn the display on to "mirroring" which will show the same thing on both screens.
    If you want to use the external display alone, you'll have to attach a mouse and keyboard (USB or bluetooth). Then, you can close the MBP and it'll just use the external screen.
    There shouldn't be any compatibility issues at all.

  • Blue tooth issues with macbook pro late 2011

    I purchased the new beats pill and havinng issues with connectivity with macbook pro. My Iphone works well. Any suggestions

    I have a similar issue.  Have you had any luck with a fix, yet?  I have a Samsung sound bar, and my Ipad and Iphone both connect with no issues. The playback is uninterrupted with fine sound quality.  My 2011 13" Macbook Pro connects, however playback often sounds like a scratched CD.  Last year I called both, Samsung and Apple, and when all was said and done it was recommended that I bring the then brand new sound bar and my Macbook to an Apple Store.  Any suggestions I are appreciated.

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    Read through this:
    http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

  • What TV's are compatible with Macbook pro using HDMI in the capacity off a monitor?

    What TV's are compatatable with Macbook pro to use as a monitor using HDMI?

    Hi Ralph,
    More information about using HDMI displays with your MacBook Pro is available here -
    Mac computers: Frequently asked questions about using HDMI
    http://support.apple.com/kb/HT4214
    Thanks for using Apple Support Communities.
    Best,
    Brett L

Maybe you are looking for

  • Not able to see full output when run in backgroun

    This is a continuation of my question I previously asked: I was trying to write a simple list with lot of headings. For example: WRITE: /6 'TitleA', 29 'TitleB', 55 'TitleC', 80 'TitleD', 106 'TitleE', 131 'TitleF', 157 'TitleG', 172 'TitleH', 198 'T

  • IPad calendar app day view does not update to "Today"

    Everyday when I open my calendar app in day view, it always show the last date when I view the calendar. It does not automatically switch to Today's date. In other words, if I open the calendar yesterday dec 24, when I open this morning dec 25 the da

  • ITunes doesnt recognise any iphone since upgrade to 10.5

    I am on windows 7 using Toshiba Satelitte L770 I have an iPhone 3GS, my wife has an iPhone 4 and we have an iPad. All 3 worked fine with the Toshiba on itunes 10.4 I then wanted to upgrade the devices to iOS 5.0.1 (from 4.3) - so iTunes 10.5.2 had to

  • FaceTime login problem

    I am not able to log into FaceTime after multiple attempts. I am logging in from India. Is there any country specific setup or activation required? Does anyone know about it?

  • Anyone who switched their iTunes account associated country cannot update their apps anymore?

    I know Apple has been claiming its iTunes Stores are country specified and so are the apps. However, I was told by a staff from iTunes Store Support that this is not the case (which is a false statement!), thus made the jump from United State to Hong