Samsung 206BW, 931BW, or something else?
Hey
I was hoping to get a display for my 15" C2D. I really like the Samsungs and was looking for a 19-20". Hence the 206BW or 931BW
931BW http://www.samsung.com/Products/Monitor/LCD_Digital/LS19MEWSFXAA.asp
206BW
http://www.samsung.com/Products/Monitor/LCD_Digital/LS20MEWSFVXAA.asp
or is there another one that is better? i hear dell is pretty good but I have never actually seen a Dell monitor. It will be used mainly for games, movies and the great resolution.
Hence the 2000-3000:1 Contrast ration and 2ms
Help and advice would really be nice.
Thank you guys.
I wil vote for something else, to give you an answer. I am amazed you waited 7 months for an answer as there are oodles of sites with LCD opinions out there.
Just buy one at a store with a refund policy, use DV--DV cable vs. VGA and unless you buy some oddball LCD no-one else in the universe uses it will work.
22" are cheap so go with a 22" one. 19 and 20 inchers are for amateurs at this point. Girls will quit going out with you and teachers will fail you with something so out of style. 24" are better. 30" are way too big to work on and type so 22-24 is the limit. Unless you are really, really nearsighted.
Similar Messages
-
now that I just re-newed my photoshop photography ....I have not been using that for some reason I have been using something else. they had changed me a couple
of times last year from one thing to another ...so I never go photoshop photography downloaded. I used the other one very little because I wasn't sure I should...gee
I hope that makes sense.
I need to download photoshop photography.
Sherri nicholasYou need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take.
In addition, you should see if the iPhone is supported. -
Downloading a file would normally bring up an option to open the file with the appropriate program or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else? It's very frustrating - sometimes you want the file opened first so it can be discarded or saved to a different location.
Hey. that's great! Thanks for posting back with the outcome.
-
On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.
That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys -
I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
The Web Role in question doesn't seem to be a web application type project.
I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
cloud service project I picked Roles and
chose Add
-> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
of which the first one seem to be exactly the GUID that defines a web application type.
However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
it starts and runs as one would expect, normally.
Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
failing to prompt the aforementioned message? Can anyone shed light into this?
Sudet ulvovat -- karavaani kulkeeSudet,
Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
You might want to compare the csproj of your C# and F# web projects which might give some pointers.
Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
Here are some other tips which you can refer or see If you are yet to do those settings
1. Turn on the IIS Express - You can do it by navigating to project properties
2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
Also I will suggest to refer this nice article about how to create a F# web Api project
http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
Hope this helps you.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale -
I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten
1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi. -
The only thing I did was get down to 5GB HDD space, had a half-import, & something else
By that I mean here's what I got:
Both Libraries are the same path....
As in the title, I was/am running out of HDD drive space, I recently (and last time) had my last iPhone (IOS 7.*.*) iPhoto import go snafu (for first time between this MBP and 3 other iphones....ever), and I think I did something else like at the least a CHECKSUM or VERIFIED or REPAIRED permissions which seemed to make some other stuff squirlley.
Anyway, I have a mid-late 2010 (OCT) 7,1 MacBook Pro 2.4 GHz Intel Core 2 Duo running Mac OS X Version 10.7.5 with 8 GM 1067 MHz DDR3 RAM and a 250GB 2.5" startup disk
*******I have a 1TB SSD/HDD here waiting to replace my boot drive, with the adapter kit from OWC and all, but want to back up all my stuf and make it reduntant a few times first. Problem is I have 1000 great photos since our snowfall here in the NE and don't to lose them and the ones of my daughter and baby daughter.
Any help is much appreciated.
Best Regards,
GJSorry but I do not even know what your question is
as a side note you must always have a minimum of 10GB of free space on your hard drive and more is better
If your photos are on your iphone then backup to iCloud in case of issues
I you could post a simple question with only the revelant context it would be good
LN -
Black macbook: not sure if its the fan, or something else (noise)
I got this macbook is september. I had no issues with it, when suddenly it began making noises. Now, I'm a gadget-blog reader, so I've been aware of Macbooks making the "moooo" sound from the fan; however, I'm not sure if my noise is the fan or something else. I get more of a "whrrrrrrrrrrrrrrrr" noise.
1) I have the macbook plugged in
2) I leave it on all the time
3) It began to hear the "whrrrrrrrrrrrrrrrrr" when:
a) activate visualizer in iTUNES
b) download shows off iTUNES
c) have a bunch of windows open and the 512MB Memory is struggling to access each window, if I say, I want to close them.
Considering this is the uncrashable, flexible, awesome OSX, and should be pesk-free, like say WINXP...I would expect such problems to not exist on the glossy OSX.
I'm currently studying abroad in the United Kingdom. I bought this macbook in San Francisco just before I left. I have plenty of warranty left. Is this a big issue? It annoys the **** out of me. None of the macbooks demoed in the store had this problem. So in a way, this is false advertising, since I'm reading that a lot of people have this noise issue.
I've fully updated my firmwares with software updater, but I still get the noise. So I'm at situation that needs some outside help as to what I should do.
Thanks.hard to say if it is serious or not. have you tried resetting the pmu? http://docs.info.apple.com/article.html?artnum=303319 that could very well help the matter.
-
I bought an apple TV but my TV has only oine HDMI outlet, so I have to unplug it when I want to watch regular TV. I bought a four plug hub at Bestbuy but can't get it to work.
Is there something else I can use?hdmi spillers and switches are hit or miss some work some don't
-
How can I do mirroring of a screen from new iPad to hdtv using apple tv and still work on something else in my ipad
You don't. Mirroring is duplicating your ipad screen on another projector - so you can't have another app going on your iPad without it also showing up on the projected image. Some apps are designed so that you see a different image in the iPad than the mirrored out display, but even then you're within the app itself.
-
Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?
Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe -
i want to switch my user id with my rescue email address, how can i change my rescue email address to something else to free that up?
Hi EllaBella0902,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to change your rescue email address:
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/kb/HT5620?viewlocale=en_US
Before you make any changes, you may want to review the information in the Frequently Asked Questions section of this article:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
This article explains how to update the information in the various services that use the Apple ID if you change it:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
Cheers,
- Judy -
How can I change the BlackBerry Link Network Drive mapping from Z: to something else?
Hello,
I generally have a mapping to my NFS server on Z:, and my iTunes library has a relative path to Z: for all of my music - the fact that Link is automatically picking Z: as my network sync target for my device does not work for me to sync music, or anything really. I can't figure out how to change this value to something else.
I found the registry key: \HKEY_CURRENT_USER\Software\Research In Motion\Device Manager\Device Settings\<DEVICENAME>\VolumeMapping with a default blank REG_SZ - can I use this key at all to manually change drive mappings for my device? If so, what is the key/value pair I need and will this mess up any assumptions taken inside the Link software for synching?
... Also, I have a Feature Enhancement Request to go along with this issue: Add a "Change drive map letter" button beside the "Turn on wireless connections to my computer" button in Link, and add the same option in the context menu to the 'Device Manager' for the mapping (which currently just says 'Explore').
Thanks for the help,
- JeffI do not know a lot about this subject but since Device Manager is not a Device and the BlackBerry Phone is not recognized as a Device in Disk management unless Mass Storage is turned ON it looks as if by design you cannot change the Drive Letter.
Also if Mass Storage is turned On in the Phone Settings File Manager and BB link will not work but the BB Phone will then be recognized as a Device in Disk Management and the Drive Letter can be changed, this has no effect on the Drive Letters for Device Manager.
Normally to change the Drive Letter and Paths of a Device once the Device is plugged you would go to Administrative Tools, Computer Management, Disk Management, right click the Device and choose "Change Drive Letter and Paths"
Changing the Registry or Uninstalling Device Manager but keeping BB Link or looking for a Utility that can change the Drive Letter such as the one that many XP users had called TweakUI (only worked in XP) or changing the Drive Letter for your Network may be the only way. -
How to render animation to a MP4 format or something else?
Hello. I usually render my animation to uncompressed AVI because after it I have to render it again with different software for video motage. So there wasn't any problem. But today I have to render my animation directly from After Effects. So I can't render it to uncompressed AVI anymore. I try render to MP4 format but that doesn't exsist. Even after wathich that tutorial below, I don't have that option what we can see in this video:
So I try to do something else. And I found different format as QUICKTIME with H.264. But after render, I can't see my animation (I can see only voice, there is no video). What is strange because movies from Adobe Premiere rendered to H.264 codec work perectly! The same codec but if I render videos from After Effects I can't see it in Windows. But from Adobe Premeire I can. Strange!
So I render my animation to QUICKTIME -> Motion-A format. And it works, I can see a whole rendered video now. But... 5 sec is over 150MB! And this is way to heavy.
Please, tell me what I have to do to render my animation in a good preset.MP4 is the best format for what you describe.
After Effects never did a good job of rendering to that format.
Instead of wasting development time trying to make AE better at it, the After Effects team chose to let the Adobe Media Encoder team work on encoding things and they would work on making After Effects perform better and have better features.
So, either render an intermediate file from AE and use that in the Adobe Media Encoder or send your AE comp directly to AME. Either way, you will use the Adobe Media Encoder to make an MP4. That's how I did it even when AE could make MP4's because AE wasn't good at making them. You can get better quality at smaller file sizes with AME. Go with it.
Here's the Adobe team's official word on it: using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects
They explain the proper workflow and they explain why they removed H.264 and WMV encoding from AE.
Maybe you are looking for
-
GIF Img in Photoshop CS3 Extended
Hello. I have searched and searched for an answer to my question and have tried many given solutions to no avail. My problem is the famous white line around my Gif image. I run a website for moms and women in general basically. I am making glitter gr
-
BAPI_DOCUMENT_CHANGE2 and BAPI_DOCUMENT_CREATE2 in background
Hi, Can anyone please tell me whether the BAPIS 'BAPI_DOCUMENT_CHANGE2 ' and 'BAPI_DOCUMENT_CREATE2 can be executed in background?. In foreground mode I can able to create and change the document successfully. but in background mode I am getting a
-
When dialing a number from my "contacts" the picture shows up underneath the overlay. Everyone else's phones I have seen (including the ones in the Apple Stores) show the contact picture at the top of the screen next the name. How can I get my iPhone
-
Hi, can any one help me or share the materials and tutorials of Planning 11. I have installed and Configured EPM 11.1.1.3 in my laptop and i already completed all the tutorials that were published in oracle website. Thanks! Siva.
-
Addon Installation Error on 2008 Server (64Bit)
I have installed an Add-On of our development on various PCs' without any problem. However on a specific server during the installation process we get an error: "Error: An attempt was made to load a program with an incorrect format (Exception from HR