Samsung Blu-ray Disc Player model BD-P4600

I just bought a Samsung Blu-ray Disc Player model BD-P4600. I was told by the store salesperson that it would work with my Mac on my home wireless network.
I set everything up as directed and cannot get it to join my network. I even went online and looked for information from others who had successfully connected to their home Mac system, however it did not seem to work for me.
I have a brand new Apple iMac running Mac OS version 10.6.2 (Snow Leopard). For my home network, I am using a Comcast cable modem connected to a Linksys Cisco WRT160N wireless N router. I am able to access all 3 home Mac computers, an Xbox 360 and an HP printer through the wireless network, but cannot connect the Blu-Ray player.
The message I receive says "No shared PCs were found."
I am usually pretty good with computer equipment, but I cannot get the Blu-Ray player to recognize the network. I even tried to connect directly to the router via ethernet cable with no luck.
Any thoughts on how I can get this to work?

You might also try turning off the wireless on your laptop and connecting it to the ethernet cable that is going to the DVD player. If you can connect to the internet, you know that you have a good ethernet cable and the port on the router is operational.
If you can't connect using your laptop, it's either a bad cable or connection, or you may have possibly setup Access Control on your router to only allow specified devices to connect on the basis of their MAC address.

Similar Messages

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

How to get my iPod Classic 160 to work with my blu ray disc player

How do I get my iPod Classic 160 to work with my blu ray disc player?

Whats the model of the blu ray player?
I'm assuming you would have to to buy a dock or AV cables that connects to ipod and correspond with the model of player.

Encoded video doesn't work on Toshiba Blu-ray disc player

I have a problem that I am trying to encode a sequence of frames in a video container , but the encoded video doesn't work on toshiba blu ray disc player .. I am using the following ffmpeg command to encode frames and convert them to a video:
ffmpeg -i "C:\ManVsWigan\Frames\%d.png" -vcodec libx264 "C:\ManVsWigan\encoded.mp4"
I tried multiple video codecs but no luck yet
"-vcodec mpeg4"
"-vcodec mpeg2video"
If you have any idea please help me

The BluRay player leverages parts of Windows DirectShow but won't serve very well as a general player since Windows will load other players for the majority of media formats.
You can get away with a limited amount of tampering of the BluRay's players tolerance of media files until you violate some far away written DRM safeguard and kneecapping the BluRay player from doing anything.
If you're trying to validate your ffmpeg composed tests of your content as part of the editing process, you're better to avoid relying on the BluRay player that is purposed for narrow replay of licensed content and equipped with oversensitive safeguards susceptible to malfunctioning from the invasions of video pirates like you defined by studio executives.
You and I understand you're not a pirate but chances aren't being taken.
Whether you just dowloaded FFmep in the macho exe format or part of the millions of other packages that include it, you can tune your players to codecs pretty easily with the KLite Codec Manager or the Registry.
Chances are you already know about KLite since editing video on Windows eventually requires it and its hard to walk down the street without eventually kiceking over a copy. But just in case you've been living on a Martian cave with your hands over your ears, snag a mirrored copy from: http://codecguide.com /download_kl.htm
I like KLite more than others because it is fairly unobtrusive and avoids stomping over other media tools the way Adobe Premiere or Sony Vegas enslaves Windows and can neuter BluRay codecs without always adequately replacing them. I can cite threads on the matter but just googling for anything such as "Adobe Premier killed my BluRay" or "Sony Vegas ruined Windows" will usually return desperate strings of posts long enough to wrap around Jupiters equator.
For general maintenance of Windows poor codec management, grab this noninstalling executable http://www.nirsoft.net/utils/installed_codec.html to determine if Windows believes it has the same codecs you thought it did and you'll likely be surprised by the fine tuning you'll need to perform.

Could the Panasonic 5.1 3D Home Theater System Blu-ray Disc Player be used as speakers on a windows

Could a
Panasonic - 5.1 3D Home Theater System - 600 W RMS - Blu-ray Disc Player be used as only speakers on a windows 8.1 desktop? And if so would it use bluetooth?

Hello coltyn-
Based on the product description, it certainly looks like it may be able to be used as the speakers for your desktop set up. Most likely you will need to buy some additional materials. Unfortunately, I’m not an expert on this, so I would either recommend waiting to see if one of our community members comments on this or you can check with the experts at your local Best Buy store.
Thanks for posting!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Do this device have Wifi connectivity ? Insignia - Blu-ray Disc Player: NS-WBRDVD

http://www.bestbuy.com/site/Insignia&%23174%3B+-+Blu-ray+Disc+Player+with+Wi-Fi+and+1080p+Output/938...
"Built-in Wi-Fi support For future streaming and product updates."
What does this mean "future streaming" -- does this mean it's does currently work due to a software issue but it has an built-in antenna
that might be enabled with a future update? I'm confused...
I just want to know if this device will connect to my home wireless network.. my network router / hub is no where near the TV and running a ethernet cable is not feasible.
THanks.
Larry

sorry I can't type sometimes
this is what I meant:
What does this mean "future streaming" -- does this mean it's does NOT currently work due to a software issue but it has an built-in antenna
that might be enabled with a future SOFTWARE update? I'm confused...

TOSHIBA Blu-ray Disc Player not compatible with USB speakers

I have a P850, using Logitch Z305 USB speakers. The speakers work fine with all other multimedia software such as WMP, iTunes or MPC, but not with TOSHIBA Blu-ray Disc Player. The Toshiba program either won't work or will crash if the speakers are plugged in. Is anyone aware of a way to fix this?
Thanks

This Logitech speakers are plug and play device that uses standard driver and are installed as any other plug and play device. I dont have it but I saw interesting movie on You Tube about it.
To be honest I dont understand why it cannot works with TOSHIBA Blu-ray Disc Player. I think you are the first one who has reported about this issue.
Problem is that Toshiba doesnt support third part software or hardware so it is not easy to find solution for this.
I really hope there are other users who have fixed it or can offer some useful tip for this pretty strange issue.

Satellite P855-33X - canno past the first menu on Blu-Ray Disc Player

Hello,
I have a Toshiba Satellite P855-33X . Whenever I try to play a Blu-ray Disc (3d or 2d) on the Toshiba Blu-ray Disc player, I can never get past the first menu (either language selection or main menu depending on disc). I'm unable to click on the menu or use the keyboard to select the options on the menu, the bluray is unresponsive.
It has worked fine in the past so I'm wondering if there's been a recent update which could have made this an issue?
I have Windows 8, recently updated to 8.1.
Thanks for your help.

> I have Windows 8, recently updated to 8.1.
Im wondering if you have updated the Toshiba Blu-ray Disc player after the update from Win 8 to Win 8.1?
On the Toshiba EU driver page you will find all the Toshiba drivers tools and utilities for Win 8.1.
Usually after the Win 8.1 upgrade, the software should be updated as well.

Question re set up: Samsung Blu Ray Disc - 55" Samsung LED 3DHDTV - Denon Receiver

We brought this package home yesterday. We have it hooked up as follows, pursuant to Best Buy's recommendations at the store where we bought it: We have the Bresnan cable box hooked into the Denon receiver in the appropriate place with an HDMI cord. We have the Blu Ray Disc hooked up to the Denon receiver in the appropriate place using an HDMI receiver. We have an HDMI cord in the spot marked "Monitor" on the Denon receiver running to the HDMI1 spot on the Television. Everything works fine, except for one problem. We can't watch cable television without the Blu Ray disc ON. If we are watching something on cable, and we turn off the Blu Ray disc, we get fuzzy white and black "ant races", but we can still hear the program. We have to unplug the Blu Ray Disc if we don't want it running all the time. I assume this could be bad for a Blu Ray. This does not make any sense at all. They should all operate independently of each other. I have also called technical support and they are stumped. Waiting for a call back from a sales person at the local store. Anyone out there have any ideas. The store sales people suggested that the best way to connect the components was with HDMI cords. I have already spent $300.00 on HDMI cords alone. Hopefully, someone out there has some ideas. THanks.

Hi again - I thought I would report back to you on the status of my issue. I stopped by our Best Buy store and talked to another person again. We wanted to see if we could bring back the Denon receiver and switch it out for another one. After explaining our situation, the guy talked to his manager. The manager had a suggestion that we try before switching out the receivers. I don't necessarily understand it, but you probably will. He said (and this is NOT verbatim - just kind of what I picked up out of the conversation) that because we were using two Samsung compenents (BD and TV), that they were trying to work with one another, but we had some kind of interference with the Denon receiver and the Bresnan cable box, and that something was getting caught up and trying to work back through the BD. Like I said, I don't understand it completely. He suggested we go to our TV menu and find where it says Anynet+. We were to check to see if that was turned on. He wanted us to turn it off. Once we did that, everything started working great. So we are up and running with a simple menu fix. Thank goodness it was that easy. I thought I would just report this to you so that in case you see any more similar problems, you can try this fix.
Thanks again for your help yesterday. Have a great day.
Lori

Apple TV as network input for Samsung Blue-Ray DVD player

I've been using a Airport Express to connect my Blue-Ray player to my wireless network. Can I instead use the Apple TV that sits in almost the same spot? If so how?

do you mean connect the blueray player to the appletv?
if yes, then no you can't.
the appletv is a client device and can't give network access to anything.

Qosmio F750 M14L blu ray disc player problem

when i use toshiba bluray disc player . . after just 10 seconds may be less it starts to hang up and to have problems it still plays the movie but hangs up too much . . .i tried to update and even re install but still the problem !

your model does not appear to be a U.S. model and this site is for U.S. models only. I'd suggest you repost your question in the appropriate regional support forum.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Is there Any Blu-Ray Media player out for Mac?

hello everyone,
I just recently installed Pioneer BDC-202 Optical drive, which I ordered from OWC. It does come with a installation Disc, but not for Mac. I mean everything works, but I can't seem to get the Blu-ray Movies to work? Why is that? Is it because of the non supporting media player? I mean I can't seem to find it anywhere on the web. Is it because its not available yet? If not when are they making it available? I mean it would suck to spend 200 dollars on an internal Blu-ray disc player in hoping to watch some high quality movies. I think OWC should not have it available for sale on a Mac site when it doesn't have any supporting programs out there to make the darn thing work.

It's not clear if the nvidia 8800GT is HDCP. See: http://discussions.apple.com/thread.jspa?messageID=7442757 .
My monitor (a Gateway XHD3000 30" display) is HDCP compliant, so I was wondering myself if the nvidia card is. Fortunately, not too big a deal for me, since I don't plan on watching protected movies in my sytem (I have a 52" LCD and 100" projection).

Workflow asked: 70min hd project (PAL 1080i50)to blue ray disc with toast 11

i tried to render a final cut Pro HD project (PAL 1080i50) into a blue ray disc with toast 11.
At the end camera pans juddered in a fast rhythm
My steps are:
build a HD timeline in FCP
export timeline to a quicktime movie
load the quicktime movie in Toast 11
toast dit convert the qtm-file again
and burned the blue ray with the result described above.
Thanks for answers

Please examine my workflow. Perhaps you quickly find out any error:
footage: PAL 1080i50 field order : lower field
70 minutes sequence: the same options
exported timeline into a Quicktime Movie - same option
loaded the resulting QTM into Toast 11
Tost started to rerender during 2 hours and burned blue ray disc
at last
medium: verbatim double layer blue-ray disc
Player: tested on two Philips blue ray players
Result
on tv-screen (hd flat screen philips) camera pans judder in a regular rhythm, perhaps twice in a second: the actor seems making little jumps when he walks silently from the right to the left or vice versa.
earlyer we tried to burn a blue ray disc directly from FCP 7.0.3 by using the option "send to blue ray"
The result was the same.

Blue ray disc players

I recently bought Vizio blue ray disc player and it has BD live capability. What type of cable do I need to access BD live on my blue ray disc and how do I connect the cable so that I can access the BD live content on my blue ray disc.

We received an Insignia blu-ray player for Christmas. I hooked it up to our Insignia widescreen HDTV and followed the onscreen prompts regarding setup (it's currently in 16:9 widescreen). However, when I play a blu-ray disc, it does not utilize the full screen--it's got vertical bars at the right and left hand sides of the screen. I did not select the "pillar-box" option and really am at a loss as to why the player doesn't utilize the full width of the screen. Any suggestions?
Thanks!

Can videos from my dropbox be played on sony blu ray dvd player BDP S580?

can videos from my dropbox be played on sony blu ray dvd player BDP S580?

Hello ptsotsos, thank you for your message. Welcome to SONY Community!
Unfortunately the Blu-ray disc player cannot play videos from dropbox. When the Internet video device is connected to an active network connection, you can browse web sites or surf the Internet. However, the built-in browser is not designed to replace the web browsing functionality of a computer.
NOTE: Web pages may not display correctly and some web functions such as downloading or saving Internet content may not work properly.
Hopefully this post helps you!

Samsung Blu-ray Disc Player model BD-P4600

Similar Messages

Maybe you are looking for