Samsung CLP-310N: web configuration?

I've just bought a Samsung CLP-310N printer. I installed the software and plugged the printer via a crossover ethernet cable to the 2nd port of a 2007 MacPro. Printer is found by OS X. Yet, I can't print...Unable to connect to the printer. Can't even reach the printer's web admin interface.
The ethernet port is configured with automatic DHCP. Can someone help me?

Fixed it by plugging the printer to the VDSL router instead of the built-in port.

Similar Messages

Samsung CLP-315W to wirelessly work with OS 10.8.2?

I know this printer CAN work with my network, it has worked with the current firmware and network printer settings, however it doesn't want to connect recently. Can someone please explain how best to set up a stable static network connection with the printer? Here's what's happened thus far. I have uninstalled the smart panel and the driver and reinstalled it fresh with the newest ones. Both are installed. When I plug in a USB I get a modern app dialog that allows me to access the settings, when I connect it via a wired ethernet connection I can access the Sync Thru setup dialog through any web browser. Other websites say that if I connect via either of those methods and change the setup to Static IP, switch the address, save it and then disconnect the blue light wireless capability should turn on within 20 seconds. The problem is it does not.
Please help me! You would be a hero to many people who got suckered into purchasing this wonderful printer with the WORST customer support ever.
OK here's all the details.
Computer - MacBook Pro Mid 2012 2.6GHz Intel Core i7, 8 GB 1600 MHz DDR3 RAM, OS X 10.8.2
Network - Netgear WNDR3700 - IP 192.168.1.1
Printer - Samsung CLP-315W Serial 1497BAFZ100574H - Firmware - V4.01.08(CLP-310W)
Printer Network Configuration Readout - IP STATIC, IP ADDRESS 192.168.1.15, Subnet 255.255.255.0, Gateway 192.168.1.1
No firewalls are enabled.
Please help and thank you!

Thank you for your reply.
The PDF I am having trouble with when using Safari is a "Weight Workout" that www.activtrax.com automatically creates as an URL and automatically opens using Reader. When I used Adobe Reader 10.1.5, the print symbol showed up. However, when I installed Reader version 11.0.01, only a black screen appeared and no print symbol showed up when I moved my mouse cursor. So, I went back to using version 10.1.5.
ActivTrax states "Your default pdf viewing program will open and display the Workout form." Someone suggested making Preview my default PDF viewing program? Do you know how to do this? If I could make Preview my default PDF viewing program, would doing so prevent me from accessing materials from websites that say that you must have Reader installed to view the item?
In additon, when I open email PDF email attachments, they open in Preview and not Reader. But PDFs that websites create automatically open in Reader.
Thanks for your assistance!

How do I install a samsung clp-315 printer under Lion?

I have upgraded to Lion. This morning I uninstalled my Samsung CLP-315 printer (I was trouble shooting & thought it would be easy to re-install). When I try to re- install via the system preferences my computer recognises the printer is there and tries to get the software to drive it from
When I click Add I get this message:
I have also tried downloading the driver from Samsung's Web site but I still can't re-install the printer.
Would appreciate comments/help to get it going again.
Thanks

I had this problem with my Samsung CLX3185, For some other reason I had to restart. After that restart when I got around to it again, I could install it. Hope it helps. Also, Samsung printer software update is available via software update. Suggest run the SW update, restart and try again.

Can't Print B&W Only With Samsung CLP-300N

I recently purchased an iMac to replace my XP CD. I've been a Windows XP user for a while, and had a Samsung CLP-300N attached to my network. I was able to fine-tune the printer driver settings (quality, number of copies, bw/color, etc) in Windows XP. However, i recently attached the Samsung to my Mac (Leopard 10.5.4) and the printer gets added just fine, and I'm able to print.
However, I'd like to be able to **just print B&W** to cut down on cost. I did this in Windows by defining one printer (and adjusting the settings) for Color and one for B&W. But I can't set the B&W only on the Mac.
I went to samsung's website and downloaded the driver - this doesn't give me a utility. When I click the Utility icon in the print queue, it takes me to the configuration webpage of the printer itself (http://192.168.1.5).
I also installed their SPanel took which is nothing more than the configuration webpage right on your desktop; the configuration webpage gives you no options for printing B&W only.
I tried adding the printer a second time with just a Generic Driver (hoping it would only print in B&W). No luck... the green light just flashes on the printer.
I was wondering if a) anyone had similar issues with this printer or b) anyone knows of a suitable generic driver I can use to just print B&W.
Thanks.

Yes. I have similar issues. My "solution" is Bootcamp. Sounds silly, maybe, but like you I want B&W only most of the time.
Really only takes a couple of minutes to reboot from OS X to OS XP. I assume you still have your Windows software, so you can operate as usual. I am resigned to the fact that some of the software I use has no real Mac equivalent, or I cannot afford to repurchase.
If you come up with a B&W driver for the CLP-300, could you please post. It would probably help a few people in the same boat. Best of luck.

Samsung CLP 510 and OS Tiger Classic

My Samsung CLP 510 usb printer just prints fine in OS Tiger with the driver provided by Samsung. However when i try a printout in classic, it does not work. The printer is connected via usb. The chooser option with the laserwriter 8 does not work. If i try to print there is the message, that the printer is not available. The desktop printer utility in classic does not find the CLP as an usb device.
So i tried the LPD option with the TCP adress from my mac and the printer queue name provided by OS Tiger. If i try to print there is the following error message: error -8873 printer is busy or switched off.
Powermac G5 dual 2.0 Mac OS X (10.4.9)

Thanks Greg,
finally I found out what is going wrong. The firewall in os x tiger should be configured with active printer sharing. The print monitor for classic should be deactivated.
The desktop printer utlility is not able to recognize some usb printers. So I decided to configure it as LPD Printer with the adress of my G5. The printer queue should be the exact name as in OS Tiger. So I created two desktop printers, one for the Samsung CLP, the other one for my HP Laserjet 3015. All print jobs are now transfered to the Cups OS X drivers. Works like a charm.

Samsung clp 315 not printing with os 10.5.8

i have a samsung clp printer that i bought with my mbp a year and a half ago. after working nearly flawlessly for all this time, suddenly i'm having problems printing. nothing shows up in the print que after i sent it and of course nothing prints. i have re-installed both the drivers and the printer itself many times and i still can't print. i don't have access to printing on my campus because my tech support "doesn't support macs" and my mbp is apparently incompatible with every single printer on campus and the whole system. my printer is conected through my time capsule, which i connect to my mbp via ethernet cable. the wireless stopped working when i upgraded to the 1tb model. previously this configuration worked great. even when i directly connect my printer to my mbp i cannot print. are there any fixes yet??? i would happily roll back to a previous version if the issue is the latest update, however i have no idea how to do this. i purchased a mac because "it just works" and am afraid of messing something up. can anyone help!!?? i have stuff that needs to be printed for school and i'm at a total loss.

I have the same issue. The current Samsung print driver has a bug whereby it will not print a document if the application from which you are printing is different from the application you used last time you printed. The workaround is to restart the printer whenever it does this. I have written to Samsung about this.

Samsung clp not printing with os 10.5.8

i have a samsung clp printer that i bought with my mbp a year and a half ago. after working nearly flawlessly for all this time, suddenly i'm having problems printing. nothing shows up in the print que after i sent it and of course nothing prints. i have re-installed both the drivers and the printer itself many times and i still can't print. i don't have access to printing on my campus because my tech support "doesn't support macs" and my mbp is apparently incompatible with every single printer on campus and the whole system. my printer is conected through my time capsule, which i connect to my mbp via ethernet cable. the wireless stopped working when i upgraded to the 1tb model. previously this configuration worked great. even when i directly connect my printer to my mbp i cannot print. are there any fixes yet??? i would happily roll back to a previous version if the issue is the latest update, however i have no idea how to do this. i purchased a mac because "it just works" and am afraid of messing something up. can anyone help!!?? i have stuff that needs to be printed for school and i'm at a total loss.

sorry, just saw that i was accidently in the snow leopard section....i reposted under the correct section. here's the link.
http://discussions.apple.com/message.jspa?messageID=12340796#12340796
sorry for the inconvenience, i was looking at other posts using search and didn't realize that i was reading the 10.6 board.
thanks again!!
Message was edited by: Elisabeth Hogrefe

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to restore the default web configuration in Lion

Hi guys so I was messing around with apache/php/mysql, and after trying to enable openssl I think i made a mistake because when I try to enable web sharing by checking off the checkbox under system preferences it just turns back off right away. If i go to 127.0.0.1 it doesn't work and neither does the localhost. I could try going through the httpd.conf files to fix it if someone could help me with that but I'd rather just try starting over, so i was wondering if there's a command to restore the web configuration back to factory settings. I know there's one for lion server which is $ sudo serveradmin command web:command=restoreFactorySettings Is there anything similar i could do in Mac OS X Lion 10.7.4??
Thanks

No I haven't, could you explain how that works?? i can try it, it's something like this right? http://support.apple.com/kb/HT5289

Where is the Lougout button on CISCO E3200 web configuration page

I do not see a Logout button on the web configuration interface. Should not there be one?

There is really no logout/signout for the web interface. You just simply close your browser. When you open the web interface, it will always ask you for the password.

Samsung CLP-300 attached to Airport Express Base Station: Issues

I have found that my Samsung CLP-300 printer, which is connected to my Airport Express Base Station via USB, refuses to print after printing one document. After restarting my Airport Express Base Station, I found that the printer would start printing again, but only one document - afterwards, I required a base station restart before the printer could print again.
Does anybody know how to rid this problem? I would like to be able to print consecutive documents without needing a reboot.

Hi Eric. I've had the same troubles for quite some time. I've had limited success setting the printer up as an IP Printer. Here's a link to another discussion that might help you out. Good luck!
http://discussions.apple.com/thread.jspa?messageID=8804705#8804705

Need driver for OS 10.9 for Samsung clp-365w Printer

Trying to conect may Samsaung CLP-363W printer to me Mac Book Pro Running Maverick.
Please help
Need driver for OS 10.9 for Samsung clp-365w Printer

Try entering the model here > http://www.samsung.com/us/support/downloads
If you can't locate a v10.9 Mavericks compatible driver, try resetting the pring function.
Open System Preferences > Printers & Scanners > Print
Hold down the Option key while clicking the "-" (Remove printer) button.
If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (
Add printer) button, then choose Reset printing system… from the contextual menu.

Accessing the online web-configuration page

I own a Linksys-G WRV200 wireless router, and I have tried to access the online configuration page and a page comes up that says
401 Bad Request
cannot use wireless interface to access web.
Now, I do not have the disk that came with the router but I do have the software for my router, downloaded from this website. I have done the process where you go into command prompt and type "ipconfig /release" then "ipconfig /renew", and it did not work, unless I have to restart my PC again after I did this process, which i have not.
Are there any other ways to open this web-configuration? The only reason I want to do this is so I can edit my NAT settings and Port Forward, is there any other way to do this without the online web-page?
Thanks in advance

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router (often, an attempt to connect wirelessly will fail).
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the Linksys router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Duplex printing on a Samsung CLP-550n

I'm running a MacBook Pro with Leopard and have been printing (one-sided) quite happily to our networked Samsung CLP-550n. But, I can't print duplex, the option is greyed out in the printer dialogue box yet from other macs around the office its possible? The default on the printer is set to long-edge binding duplex printing.
Any help would be appreciated.

Alright, it really was a coincidence. However, the printer is using up way too much toner, the text is all blurry. I've already lowered the quality to draft, but it's not enough.
This printer is known to use a lot of toner, but not that much. I had to adjust some settings under Windows, too, to reduce the consumption, but it wasn't so bad that the writing was blurry. And I can only adjust the quality in Linux, I didn't find any other options to play with.

Samsung CLP-315 doesn't print

I was looking through this discussions for two days now and tried everything to make my Samsung CLP-315 print via Time Capsule. If I plug the printer into my iMac it works fine, but if I plug it into Time Capsule it will print a few times only. I'm very disappointed because the printer is Mac compatible and Time Capsule is supposed to support all printers, since there is no list of supported printers.
I guess it can only be a compatibility problem...

It seems like this list is marketed a lot by the experts. Can you please teach us to fish? What are the specs to look for / ask about to determine compatibility? HP had a matrix on their drivers of some sort on their website a while back, but cannot find it.
The problem is this - folks want to buy a printer; which should they buy? Apple keeps thinking of the problem as - i have a printer, how do i get it to work. The latter may be valid - but I keep reading the former and it doesn't appear as if it can be addressed.
Please help us use your products. thank you.

Samsung CLP-310N: web configuration?

Similar Messages

Maybe you are looking for