Samsung clp not printing with os 10.5.8

i have a samsung clp printer that i bought with my mbp a year and a half ago. after working nearly flawlessly for all this time, suddenly i'm having problems printing. nothing shows up in the print que after i sent it and of course nothing prints. i have re-installed both the drivers and the printer itself many times and i still can't print. i don't have access to printing on my campus because my tech support "doesn't support macs" and my mbp is apparently incompatible with every single printer on campus and the whole system. my printer is conected through my time capsule, which i connect to my mbp via ethernet cable. the wireless stopped working when i upgraded to the 1tb model. previously this configuration worked great. even when i directly connect my printer to my mbp i cannot print. are there any fixes yet??? i would happily roll back to a previous version if the issue is the latest update, however i have no idea how to do this. i purchased a mac because "it just works" and am afraid of messing something up. can anyone help!!?? i have stuff that needs to be printed for school and i'm at a total loss.

sorry, just saw that i was accidently in the snow leopard section....i reposted under the correct section. here's the link.
http://discussions.apple.com/message.jspa?messageID=12340796#12340796
sorry for the inconvenience, i was looking at other posts using search and didn't realize that i was reading the 10.6 board.
thanks again!!
Message was edited by: Elisabeth Hogrefe

Similar Messages

Hint about Samsung CLP-510N Printing with Bonjour

After installing with Bonjour in Printer Utility I had a problem with Samsung's CLP-510N that did not appear with a Windows machine on the network. Using this printer, it simply stalls after appearing to start up OK. It just stops part way through sending a page and refuses to continue. It shows stopped.
I found that if you try to install this printer using Bonjour in the Printer Utility it will not work. However, if you (as per the Samsung instructions) install with IPP (internet printer protocol) in OS 10.4.x there is no problem.
A nice feature in Printer Utility is that the IP address entry does self-complete and shows what printers' address are as you fill out the line.
This may be applicable to other printer related issues with Bonjour. Perhaps it's the way I use my resources, but in short I find Bonjour to be totally useless!
G5 PM 2.0 dual, G4 TiPB DVI 800MHz/1GB, G3 B&W 400MHz Mac OS X (10.4)
G5 PM 2.0 dual, G4 TiPB DVI 800MHz/1GB, G3 BW 400MHz& Mac OS X (10.4.5)

solved my own problem.

How do I install a samsung clp-315 printer under Lion?

I have upgraded to Lion. This morning I uninstalled my Samsung CLP-315 printer (I was trouble shooting & thought it would be easy to re-install). When I try to re- install via the system preferences my computer recognises the printer is there and tries to get the software to drive it from
When I click Add I get this message:
I have also tried downloading the driver from Samsung's Web site but I still can't re-install the printer.
Would appreciate comments/help to get it going again.
Thanks

I had this problem with my Samsung CLX3185, For some other reason I had to restart. After that restart when I got around to it again, I could install it. Hope it helps. Also, Samsung printer software update is available via software update. Suggest run the SW update, restart and try again.

Can not print with HP LaserJet 6L since the upgrade to Mavericks.

Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
I already install the latest print driver from the Apple Software Update website.
The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
The error when print to HP LaserJet 5000 is as follow:-
Unable to get printer status (Not Implemented)!
Network host 'x.x.x.x' is busy; will retry in 30 seconds...
This error can stay forever if I do not delete the print job
The error when print to Epson AcuLaser C9100 is as follow:-
Printer not responding
This error can stay forever if I do not delete the print job
Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
My 2 printer are in good condition, so this is not the printer problem.
Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
Thanks in advance.

That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Lightroom 2.5 not printing with main account user but prints with a new use

I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

Just trying again to see if anyone has any solutions for this question. Thanks

Why will my epson artisan 810 will not print with ipad?

Why will my epson artisan 810 not print with iPad?

Because it is not a Airprint enabled printer.
http://support.apple.com/kb/ht4356

Samsung ML-1630W printer with Mac OS 10.7.5

I'm trying to connect my Samsung ML-1630W printer with my Mac OS 10.7.5 but am being told printer drivers are unavailable. Any I download from samsung or elsewhere still make no difference. Please help!
I haven't even started on the nightmare wireless setup, I'm still struggling to get the computer to even see the printer and yes, everything's plugged in and turned on, before you ask...!

Yes , light room 4 will work ..
Please see the system requirements of LR4 : http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

Officejet Pro 8500A is not printing with Yellow cartridge. Full cartridge and good health ...

I have an OfficeJet Pro 8500 which is not printing with the Yellow cartridge. Printing with the Cyan, Magenta, and Black cartridges is fine. Diagnostics show all cartridges properly installed and having adequate ink supplies.I replaced the Yellow cartridge with a brand new XL cart, but to no avail. I cleaned the orifice with Isopropyl alcohol and a cotton swab, thinking perhaps there was some dried ink or an impurity there. The problem still exists.There are no error messages, either via software or at the printer itself. The printer is out of warranty (imagine that!).I have used HP products for well over 15 years, partly because HP support has been historically excellent. After reading some of the posts on these forums, it seems that HP has allowed their support quality to diminish - significantly. I hope that is not the case in real life.Any ideas out there?

I am having same problem. OfficeJet Pro 8500A Premium. Not printing with Yellow. First replaced Yellow cartridge with new, then spoke with HP Support yesterday and was told that the Black and Yellow Printhead must need to be replaced, at a cost of $49. New Printhead arrived today, inserted and still having same issue with YELLOW! So, for the cost of a new Multi-Pack of print cartridges (which had the Yellow I used to replace the low ink), and the new Printhead, I could have purchased a NEW CANNON PRINTER. I have used HP Products for over 20 years - both professionally (HP Plotters) and at home (always HP Printers, Scanners, Multi-devices, etc. I am VERY frustrated!

Samsung clp 315 not printing with os 10.5.8

i have a samsung clp printer that i bought with my mbp a year and a half ago. after working nearly flawlessly for all this time, suddenly i'm having problems printing. nothing shows up in the print que after i sent it and of course nothing prints. i have re-installed both the drivers and the printer itself many times and i still can't print. i don't have access to printing on my campus because my tech support "doesn't support macs" and my mbp is apparently incompatible with every single printer on campus and the whole system. my printer is conected through my time capsule, which i connect to my mbp via ethernet cable. the wireless stopped working when i upgraded to the 1tb model. previously this configuration worked great. even when i directly connect my printer to my mbp i cannot print. are there any fixes yet??? i would happily roll back to a previous version if the issue is the latest update, however i have no idea how to do this. i purchased a mac because "it just works" and am afraid of messing something up. can anyone help!!?? i have stuff that needs to be printed for school and i'm at a total loss.

I have the same issue. The current Samsung print driver has a bug whereby it will not print a document if the application from which you are printing is different from the application you used last time you printed. The workaround is to restart the printer whenever it does this. I have written to Samsung about this.

Samsung CLP-315 printer not happy with Snow Leopard

I got a Samsung CLP-315 color laser printer about 6 months ago. I had it connected to an iMac G5 (PPC) running Tiger. It worked wonderfully. Well, the iMac died so I got a new Mac Mini (Intel running Snow Leopard). Well, now things are not working very well. When I try to print, sometime it prints, other times I need to power cycle the printer, then when I try to print it works. Printing remotely from my other iMac used to work flawlessly, now it is interemittent. For example, when I try to print a PDF file remotely it won't print. I've very dissapointed that moving to the newest OS causes problems.
Any suggestions?
Thanks

I think I may have fixed the problem. I haven't done extensive testing, but...
I turned off the printer. I used the install CD that came with the printer. I performed an Uninstall operation. Then I opened System Preferences -> Pring & Fax, and deleted the printer. Then I turned on the printer and Snow Leopard asked me if I wanted to install the driver. I said yes and it went looking. When it completed the printer showed up in my print preferences. This time the picture of the printer showed up in the preferences. Before that it was a generic looking printer. Maybe these drivers are newer/better. We'll see.

Hp 1315 will not print with 10.6.7

I cannot find any answers to this strange set of circumstances.
I had an old iMac and an hp 1315 all-in-one printer, and everything worked fine. I recently bought a new iMac with OS 10.6.7, and, rather than reinstalling the printer software, I just plugged the old printer into the USB port on the new iMac. The printer worked fine but the device would not scan. I have since learned that 10.6.7 supports printing ONLY on this device. So far so good, but this is where things get strange.
I wanted to scan some pictures, so I got out the old software CD that came with the printer and installed it in my new iMac. The result was that the device was now able to scan. I was happy about this until I discovered that the 1315 now will not print. I have done everything I can think of, including:
-- uninstalling the hp software
-- downloading the most recent driver from the HP website
-- deleting the printer from the Print & Fax window and then adding it again
-- running the "Reset Printing System" on the Print & Fax window
-- running "Software Update"
-- unplugging, replugging, restarting, etc.
-- running the test page on the printer
-- using the device to copy (i.e., using it separate from the computer)
-- checking to see that there are no lights blinking on the device and that it has toner and paper
The Print & Fax window shows me that my 1315 is "Idle" and is the "Last Printer Used," and it has the green light next to it that should indicate that there are no issues with the printer. But when I try and print something, it doesn't print, and the job status is simply "Error."
I am fine with using this device as a printer only, like I did up until yesterday. I have another scanner, and if I had known this would happen I would used it and would never have touched the 1315 or messed with its scanning function.
I must be able to print things for my business. Can anyone help me.

Download and use the updated HP software from their web site, don't use the disk.
You might have to perform some of the steps here, including trying a new user and #18 Resintall Just OS X to kick out the traces
Step by Step to fix your Mac

HP LaserJet 3015 not printing with 10.5.6

I just upgraded from 10.5.5 to 10.5.6 and my HP Laserjet does not print. I removed it and added it back but when I try to print it always gives me the following error when the printer queue is trying to connect:
Printer busy (status:0xe00002e9)
Please help.
HGCali

<Is this because i just upgraded to 10.5.6? </i>
No, probably not. I have no problems printing to my 3015 from 10.5.6.
Is apple going to do something about this?
Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

Dell laptop with xp operating system will not print with new hp 8610 wireless printer.

Downloaded software from disk and from hp website everything went smoothly except would not print test page or any other document. used scan doctor everything checked out told me to run test page would still not print. told me to print internal test page and it printed it. said had software problem and to reinstall. did so many time still no luck......
where is hp help desk to solve these problems have spent 5 hours with this issue. I have a cannon mx410 wireless and works perfectly. help!!!!!!!

I am experiencing the same issue with Generic desktop PC with Windows XP Professional SP3.
Scan ok. but:-
- fails to print test page (Error: "Test page failed to print. Would you like to view the print troubleshooter for assistance?")
- fails to print from notepad (Error: "The Parameter is incorrect")
Tried Ethernet, wireless and USB connections and all exhibit same behaviour.
Uninstalled and re-installed multiple times.

Samsung clp not printing with os 10.5.8

Similar Messages

Maybe you are looking for