Samsung Laser & AE printing

I can print fine if I connect my Samsung laser directly to my Macbook. If I attempt to print via the AE using Bonjour, I get "Device in use, waiting..." from the printer. No one else is using the printer and I can't seem to get past this point. I've already deleted and reinstalled the printer drivers.
Any help would be greatly appreciated.

System Preferences --> Printer/Faxes --> Add new printer. I selected IP. Under the IP settings, I chose Jetdirect Socket from the dropdown, entered the IP address of the AE on our network, named the printer and selected the driver from the dropdown list.
The driver in the dropdown list didn't have the printer name in front of it, just the model.
Hope this works for you.

Similar Messages

Samsung laser suddenly printing garbage

I've been using a Samsung ML 2250 successfully for a couple of years with my Imac with the Gutenprint drivers. But suddenly, perhaps after my last software update, it began to print garbage on page after page after page. The first page starts out "%1PS-Adobe-3.0"
Is this related to an update of my OS? I've reset the printer system, reinstalled, but same problem.
Any suggestions?

Partial success--this thread helped: (Thanks to Matt Broughton)
http://discussions.apple.com/message.jspa?messageID=3442464
I installed the HPJIS driver found at http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs.
It doesn't support the ML 2250 but it does support the ML 2150. I installed it as that and it printed a page correctly.
I'm still not sure what happened to the Gutenprint driver...

Samsung laser printer can't print via Airport

I can no longer get my Samsung laser printer (ML-1210) to print via my Airport Extreme Base Station network. All I get is the Printer Center telling me that it can't find the printer. Prior to OS X 10.4.4 and Airport Firmware update 5.7 no problems, after OS X 10.4.4 and Airport Firmware update 5.7 some types of documents (.pdf) would print sometime and some types (.rtd) wouldn't print at all. After OS X 10.4.5 nothing prints.
So far a direct USB connection seems to print OK, as far as regular text files (Rich, and Plain) are concerned.

I tried so many things I'm dizzy. Nothing done to the computer, not even clean installing OS 10.4 on an external HD and booting from that worked. What seems to have finally worked (????) was reverting the AEBS Firmware version down to version 5.5.1.
Since I print so infrequently I'm not going to say it's all OK until I do some more testing/printing.
In the mean time if anyone can give me an specific idea why this conflict may be happening and what else I can do to fix it without running my AEBS with older Firmware I would be grateful.
The latest driver for Samaung ML-1210 is a couple of years old and I think it is a proprietary code (not something standard like PostScript).
I'm not sure if it's only the AEBS Firmware or a combination of conflicts between the "OS Version-Printer Driver-AEBS Firmware".
Thanks.

20" Intel iMac and Samsung Laser Printer

I ordered my new 20" Intel iMac last Saturday, the 14th. From day one, it said estimated ship was Jan. 24th. Yesterday I checked the status and it still said the 24th, but it also said estimated delivery for Jan. 31st. I was sad because when i ordered it, it said estimated ship 3-5 business days. Jan. 24th would be longer than that. So I checked my e-mail this morning, and lo and behold, I have an e-mail from Apple saying my new computer shipped out this morning, making it 5 business days since I ordered it (4 if they considered Monday a holiday). I just wanted to reassure others that the ship date may not be as late as it's estimated.
My question is this... I have a Samsung laser printer (the ML-1740) hooked up to my fiance's Windows XP machine. My Sony Vaio desktop (which I'm giving to my mom) can see the printer just fine. It prints just as if it was hooked up to it. My Powerbook however, cannot see the Samsung printer over the network. I'm a nursing student and print out tons of text only stuff, so I really need to use the laser printer with my new Mac. I've see a lot of different discussions on Mac drivers for this particular model, but I haven't tried any of them on my Powerbook, and I'm curious as to whether or not any of them would even work with the new Intel Mac. My other question is whether or not there is any way I can get my iMac to see the printer on the Windows. I don't necessarily have to install drivers on the Mac if I don't need to. I just need a solution to make it work. If I have to install something, that's fine. If I can just make it print over the network, that's great too. I don't ever use any of the settings the Samsung software provides, so just basic printing is fine. I just don't want to have to e-mail all my documents to myself and then go to the Windows machine to have to print. I apologize if any of this is confusing. What are some of the things I can try to make this work? Or can someone point me in another direction to get the answers. I was stupid in not realizing that the printer didn't support Mac OS X when I bought it, even though I already have one Mac. Thanks so much! I love these forums!

My shipping was the same way, maybe they had a supply shortage of RAM or just a long queue of computers waiting for upgrades and not enough people to perform them. Mine shipped today with an estimate of for the 25th.
I have looked around on Apples site and couldn't find anything about supported printers. You will have to install some form of driver on the Mac. You will have to make sure the PC has it shared correctly. Read about printer sharing in the windows help files. I don't know any more off hand.

Samsung laser printer software updater gone haywire?

I upgraded to Mountain Lion several months ago. I've had the same Samsung ML-2850 printer attached to my system for over 2 years. All of a sudden about a week ago, through nothing I've done, I get a window popping up randomly asking if I want to update the ML-2850 software. If I click "yes" it says there's no software available (which is correct, per the Samsung support web site). If I click "not now" it goes away, only to pop back up randomly several times a day.
I've been in Software Updater and can't find any way to stop this. I've been to the Samsung web site, and I have (and have had) the latest driver for well over a year.
How do I get it to stop this new and very irritating habit??
Tks!
B

Thanks for the link. Here's the part of the thread that helped me...
What worked for me was telling it which printer to print to on that server by, instead of clicking the IP item to add the printer:
1. On the Mac, when Adding a Printer in System Prefs, right click on the toolbar, selectCustomize Toolbar..., and add the 'Advanced' item (looks like a gear)
2. Now, when adding a printer, select that Advanced item (looks like a gear). Select from the drop down 'LPD/LPR Host or Printer', and URL: islpd://(ip address of your printer)/(name of printer) So for example, if your shared printer's name is RW-240 you would use lpd://10.0.1.1/RW-240 using the specific IP of your PC and printer name. Then select your Driver as usual and add.

[SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

Hi. I only speak a little English. Sorry for that.
I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
Well, this is how are the things now:
$ lsusb | grep Samsung
Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 mar 4 09:56 /dev/bus/usb/002/004
$ grep usb /lib/udev/rules.d/50-udev-default.rules
# 'libusb' device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
$ sudo grep SystemGroup /etc/cups/cupsd.conf
SystemGroup sys root lp
$ groups
lp wheel games video audio optical storage scanner power users
$ cat /etc/modprobe.d/blacklist.conf
blacklist usblp
$ lsmod | grep usblp
(no output)
$ cat /etc/udev/rules.d/10-cups_device_link.rules
KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
$ cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
$ rc.d status cupsd
:: Checking cupsd status [STARTED]
$ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
cups 1.5.2-1
ghostscript 9.05-1
gsfonts 1.0.7pre44-3
gutenprint 5.2.7-3
foomatic-db 1:4.0.7_20110707-1
foomatic-db-engine 1:4.0.7_20110707-1
foomatic-db-nonfree 1:4.0.7_20110707-1
foomatic-filters 1:4.0.7_20110707-1
splix 2.0.0-11
I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
I miss archlinux, but I need to print.
What may be wrong? What may be I am missing?
Thanks a lot for your comments and help.
Last edited by felihommen (2012-03-04 20:33:39)

Solved!
Restarting cupsd didn't work.
But reinstalling cups...
$ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
$ sudo rm -r /etc/cups/*
I realize cupsd is already running:
$ ps aux | grep cupsd
root 1549 0.0 0.1 75548 4080 ? Ss 21:04 0:00 cupsd -C /etc/cups/cupsd.conf
felipe 1690 0.0 0.0 8416 1028 pts/1 S+ 21:13 0:00 grep cups
I kill it
$ sudo -SIGKILL 1549
$ ps aux | grep cupsd
felipe 1694 0.0 0.0 8416 1024 pts/1 S+ 21:13 0:00 grep cups
Ok. Reinstall cups
$ sudo pacman -S cups
Start cups daemon:
$ sudo rc.d start cupsd
Open firefox. Go to web interface, bla, bla, bla.... And it's there!
I feel really silly. It was a fresh install, so I didn't think about reinstalling.
Printed some jobs and worked perfectly. I used the gutenprint driver.
Thanks a lot, pyther. I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

How do I make my workhorse Samsung ML-1740 printer work with Yosemite 10.10.3?

How do I make my workhorse Samsung ML-1740 printer work with Yosemite 10.10.3?

Are any other Samsung printers affected? Or is this a specific ML-1915 problem?
(I still can print on a shared ML-1640 printer at home.)
I hope Apple is also reading these forums: As said before: This started with the OS X update!
Then in between there were Samsung printer updates issued by Apple via the softwareupdated function.
They also didn´t solve the problem.
I also tried removing the printer and adding/setting it up again. (as suggested in the Apple support pages).
Even installing the original driver that came on CD. That didn´t help either.
Logic still tells me that this is an Apple / OS X caused problem. Please fix it!!!
I have no intention to buy a new printer just because Apple might have messed up with their updates.
The printer was working perfectly fine and it just got a fresh toner.

How do I get my Samsung tablet to print invoices and shipping information

How do I get my Samsung tablet to print invoices and or shipping labels . Have HP loaded will not print.

Hi,
Depending on your printer actually, please use the Google Play/Store search for HP All-In-One Printer Remote or HP ePrint and install on your tablet.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

Read the printer manual.

How do I install a samsung clp-315 printer under Lion?

I have upgraded to Lion. This morning I uninstalled my Samsung CLP-315 printer (I was trouble shooting & thought it would be easy to re-install). When I try to re- install via the system preferences my computer recognises the printer is there and tries to get the software to drive it from
When I click Add I get this message:
I have also tried downloading the driver from Samsung's Web site but I still can't re-install the printer.
Would appreciate comments/help to get it going again.
Thanks

I had this problem with my Samsung CLX3185, For some other reason I had to restart. After that restart when I got around to it again, I could install it. Hope it helps. Also, Samsung printer software update is available via software update. Suggest run the SW update, restart and try again.

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

Thias is what I find in system information:
Samsung Scanner:
Version:          2.01.12
Erhalten von:          Apple
Zuletzt geändert:          10.04.14 21:20
Art:          Universal
64-Bit (Intel):          Ja
Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

Laser Jet Printer P1007

HI.
I have installed Laser Jet Printer P1007, since about a month it is not accepting paper for printer. First it accepts but subsequently stops and retry message comes though the paper is always full. Please provide solution

Welcome to the HP Forums paperunloading,
I read your post, which indicates that the printer won't pull the paper in.
I can help you with this.
Make sure the paper tray isn't over filled.
I have provided a document to go through the steps to see if that will resolve the issue.
Attention Light Blinks on the Control Panel When a Paper Jam Occurs.
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Where can I download an user guide for a HP laser jet printer p2055dn ?

Where can I download an user guide for a HP laser jet printer p2055dn ? [email protected]
This question was solved.
View Solution.

Hi,
You may not be able to find the manual for it but this is the manual for the P2050 series:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01461642/c01461642.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[Solved] Samsung SCX-4300 Printer Problem

Hi everyone. I installed Arch Linux today. Everything is fine except printer. I am using Samsung SCX-4300 printer and scanner. Scanner works fine but CUPS doesn't see the printer. I can't see anything on CUPS web interface's Local Printers area. Here is a screenshot.
I can see my printer in lsusb command:
Bus 002 Device 004: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 002 Device 003: ID 04e8:342e Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So why I can not see my printer and how can I fix that?
Last edited by DoGuKaN (2013-07-30 20:13:21)

I have a very similar printer (SCX-4500W) and found that I was able to get it working as a printer but that I could not get both print and scan functions to work at the same time.
In order to get the printer going I had to add a file to /etc/udev/rules.d/71-scx4500w.rules with the content as a single line:
ATTR{idVendor}=="04e8", ATTR{idProduct}=="342b", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"
You will need to change the idVendor and idProduct in the line above to match that for your own printer from the lsusb command instead of those above for the SCX-4500W.
I would also suggest that you use the splix drivers package - i.e. make sure that the splix package is installed with:
# pacman -S splix
Then when you add the printer select the splix drivers which will work with that printer (you should check the splix support page to check your printer is supported but I am pretty sure it is)
Once that is done then you need to start the cups.socket daemon with the following command as root (exclude the # which is the prompt)
# systemctl start cups.socket
and if it then works, and allows you to add the printer, then you also need to "enable" the same daemon so that it starts after the next boot as well:
# systemctl enable cups.socket
One other thing is that if you want your printer to be discoverable as a cups remote printer on your local network you will need avahi-daemon running on the server to which the printer is attached, as well as on any machine which needs to see it - check the arch wiki on how to set that up if you need it.
I hope this helps.

How to install samsung scx-4200 printer/scanner on yosemite?

How to install samsung scx-4200 printer/scanner on yosemite?
iam not able to install the drivers for samsung scx-4200 printer/scanner
is there any method for wifi print from my mac air to samsung scx-4200 printer/scanner

Try SpliX, it works ok.

Samsung Laser & AE printing

Similar Messages

Maybe you are looking for