Samsung LN40C560 40 inches LCD TV screen is completely RED. HELP??

I have a Samsung LN40C560J2FXZA and the whole screen turned completely Red. I don't know to how to fix it and what is wrong with it? If I have to repair it how much will it cost me ? like a estimate? Please HELP?????

Tvs make cool targets if you're a shooter. That's about all that set is good for now. Sorry to break it to you.
Disclosure: Former BBY employee.

Similar Messages

Samsung Series 750 LCD Questions

I’ve had my TV about a week and am still learning all the ins and outs.
Couple of questions:
1. On the inside flap of the owner’s manual, under “Precautions When Displaying a Still Image”, it says, the following:
“Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right, and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.”
Question(s): What constitutes a “long period of time”? I didn’t think LCDs had screen-burn issues. Also, when HD channels broadcast a show that is in SD, it is in pillar box. Even DirectTV stretch mode does not prevent this. The only solution is to put the TV in “wide mode”. Kind of a hassle. Will watching a two hour TV show or movie be an issue?
2. What is the best Auto Motion Plus custom setting for watching sports (Blur Reduction setting and Judder Reduction setting)? Or, is one of the presets (“Clear”, “Standard”, or “Smooth” ) best?
Thanks for the help!

1: Assuming you have normal/modern viewing habits, one really doesn't need to worry about 4:3 burn on an LCD. I've had my Pioneer plasma for about 3 years now, and I can only barely notice any 4:3 burn. Samsung mentioned this in the manual simply to cover their rear-ends.
2. The 120hz is a feature. The best setting is the setting you like.
Disclosure: Former BBY employee.

Retina MacBook Pro screen(Samsung) compared to 2010 MBP screen

I was doing some comparison between my Samsung retina MBP and a Mid 2010 glossy 15" MBP in a room lit with daylight. The quality in the screen is amazingly better and I am not referring to the resolution improvement.
Both are using the standard color display profile, 10.8.2, and Safari 6. (rMBP = retina version below)
white saturation test: http://www.lagom.nl/lcd-test/white.php
rMBP: only 254 is not disinguishable from nearly every angle.
MBP: you can only distinguish up to 248 with 0 degree viewing angle. Only when you start looking 60+ degrees off center can you distinguish up to 251 but then you have severe color distortion.
Black level test: http://www.lagom.nl/lcd-test/black.php
rMBP: Easily pick out down to 8. If I look hard enough I can distinguish down to 5. In dark room can barely make out down to 3.
MBP: Easily down to 7 and down to 5 if you change viewing angle.
Contrast: http://www.lagom.nl/lcd-test/contrast.php
rMPB: see equal steps in brightness across entire range
MBP: past 24 the bars look fairly uniform and not easy to distinguish steps, last 2 bars are saturated
Viewing angle: http://www.lagom.nl/lcd-test/viewing_angle.php
rMPB: red text on entire screen at 0 degree viewing angle with little to no change of text at different viewing angles
MBP: Looking at 0 degree viewing angle the text appears all different shades of red depending on what part of the window you look at. Look like black striped text at top of window and the correct "red" at bottom when viewing angle centered in middle of screen.

retina macbook pro late 2013 13 inch:
white saturation test: http://www.lagom.nl/lcd-test/white.php
rMBP: All them are distinguishable, but you should look very close to see the 254.
Black level test: http://www.lagom.nl/lcd-test/black.php
rMBP: with brightness set to highest, I can't see first 5 squares in a room with daylight condition.
Contrast: http://www.lagom.nl/lcd-test/contrast.php
rMPB: with brightness set to highest, bar 1 is still not distinguishable from background.
This is my first laptop, I thought is should be much better, since I had heard that the screen is jaw-dropping, eye-popping, But it is not at all something special, my old, low resolution, cheap LG computer monitor is better in some of the tests.

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?

I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Satellite M70-340: screen went completely blue or black

Hi everyone,
I just bougth a Satellite M70-340 notebook and twice tonight the display went into a single color (once black, once blue) and though I still could hear the windows working (I could hear the Windows alert sounds and MSN message alerts), the screen went completely blue or black. I guess the error stems from a display driver problem so I downloaded the latest Intel driver found on this site. I am not sure if it will work.
My question is, did this happen to any of you? How did you fix it? And although I have an Intel Graphics Media Accelerator Driver for Mobile, could I install the ATI driver on this website? (I would prefer ATI driver since it is more up-to-date.)
Thanks all for your concern,
Best regards.

First of all thanks for the advice.
I downloaded the Intel driver found on the website but it turned out that, it is the version already installed in my notebook. So I don't think much has changed in my computer, now that I have installed the Intel driver again.
It has been only 3 days since I bought my notebook and I only installed a few softwares so I don't think it is in a condition much different from factory settings :( Therefore I am not sure if resetting my computer to factory setting would do.
Does anyone know if I could possibly use ATI display driver for my notebook? (It has Intel Media Accelerator Driver or something like that)
Thanks all for your concern,
best regards.

I need to get into my phone, but the screen is completely unresponsive.

I have the iPhone 4 and a few months ago, I dropped my phone and the screen shattered. Now the screen is completely unresponsive and I would like to access my contacts, texts, calls, etc.. Is there anyway I could get into all of that through iTunes or at least my computer?
It's been this way for about a week and the texts and calls are flooding in and I can't even let these people know my phone doesn't work. Which *****.
*I don't have the money to replace/fix my phone at the moment, so I need to find an alternative.
Thanks.
-TMB

You cannot access the phone via the computer. You could try and backup the phone and try and access the backup via a 3rd party software, however most of them cost. Touchcopy is a good one to see the texts, but I'm not sure it will allow you to look at the call lists.
I suggest you find a dumbphone so you can at least handle texts and call since you cannot afford to fix the device right now.

I just downloaded the recent Maverick Software Update onto my Macbook Pro 15" and when the download/reset finished, my screen was completely black and I have not been able to get it back since. Help?

My computer had been wanting to do a software update, with what I believe was the Mavericks Software, for a few weeks but I had been putting it off. When I finally decided to install the update onto my Macbook Pro 15" today, my screen went completely black and I haven't been able to get it back since. The computer still turns on, I can tell because my caps lock key still glows when I press it and my volume buttons still make sounds when I press them. However, I cannot see anything on the screen. I don't even get the grey start up screen when I reset my computer. I have tried the SafeMode Restart where you hold Shift while it is restarting and the Display Reset in which you hold Command + Option (alt) + R + P until you hear the start up noise twice, and neither have worked. Any other advice on what I can do to get my screen back without having to send my computer away to be fixed?

Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

Why my Mac Mini cannot connect to my Samsung 32" HD LCD TV?

Hi guys, I just bought a mac mini and a Samsung 32" HD LCD TV. I was trying to connect the mac mini to the TV by HDMI cable,I and set the PC as the source of the TV. but the TV cannot find signal at all. I tried both HDMI ports on the TV, the results were same. Please help me about this problem. Thanks a lot.

Welcome to the Apple Discussions!
Please tell us about your LCD TV. What model is it? What year was it made?
The reason that I ask is because Samsung says that their TVs made before 2007 have a DVI/HDMI port that does not support computer connections.
Samsung's Guide; How To Attach Your LCD TV To A Laptop Computer

HT1688 I need a Front LCD Display Screen Touch Digitizer Assembly Frame for Iphone 4S Black, where can i buy it ? can i it by website? what ? thanks

I need a Front LCD Display Screen Touch Digitizer Assembly Frame for Iphone 4S Black, where can i buy it ? can i it by website? what ? thanks

Anywhere you can find it via the obvious Google search. It won't be from Apple, but will be a generic replacement.
Why are you throwing away any future chances of out of warranty replacements when you drop or drown it? Apple will give you a warranteed replacement phone for $199 (in the US, roughly the same in your country)

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

I have the original iPad and today 2 inches of the screen went to all color lines. Cant' work or play?

I have the original ipad. Today 2 inches of the screen went to straight color lines. Can't change it! Can't read or work. HELP!!!! Please : )

Sounds like hardware failure.
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

LCD white screen bb curve 8520

my BB cruve LCD white screen bb curve 8520 ????

Hi bluerain welcome to the Community
What is device OS version, is it the recent one? Have you recently updated your device ? If not try that if no updates are there than reload your Device OS.Have a look :
KB30280 : BlackBerry smartphone display blank white or black screen .
If it does not solves then it will wise to visit your Carrier for Replacing or Repairing.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

The font size in the menu bar is too small (unreadable). How can I increase font size. I have a new Samsung PC with high resolution screen.

Hi the fnt size in the menu bar is too small (unreadable). How can I increase the font size. I have a new Samsung PC with high resolution screen.

You must mean Photoshop Elements 11, not Photoshop.
There is no ability to change the size of the menu font in PSE 11.
note to mod:
Please move to the Photoshop Elements forum.

Can i install Adobe AIR on Samsung Galaxy S LCD I9003

Hi,
I wanted to know if we can install Adobe AIR on Samsung Galaxy S LCD I9003. The phone is powered by a 1GHz Cortex A8 CPU but I want to double check before buying this phone. The main purpose for buying this phone is to develop Android apps using Adobe AIR. Also could you suggest some other phones for teting apps developed using Adobe AIR.
Thanks,
Salim

Hi Salim,
This Adobe webpage shows the supported devices:
http://www.adobe.com/flashplatform/certified_devices/
Thanks,
Lisa Chao
Adobe Flash Runtime Team

Samsung LN40C560 40 inches LCD TV screen is completely RED. HELP??

Similar Messages

Maybe you are looking for