Samsung M320 Bluetooth connection to Tx

I can pair my Samsung to the Tx, but it will not connect. Are there drivers suitable for the phone? I have updated the drivers however there are none listed for Samsung, Can another be used? Currently, I have paired using the universal driver.
Post relates to: Palm TX

Only Samsung drivers I've seen are for sale here:
nova media - Mobile High Speed. Solutions for Mac, Palm and Windows for 3G UMTS and GPRS
They do offer a free trial. Be advised, much depends on who your cell provider is - not all of them allow access to their network by an external device!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Samsung Convoy Bluetooth connection

I have a Samsung Convoy and 90% of the time I have to turn the phone off and back on to get the phone to connect with the Jawnone Icon . I have tried removing and re-pairing the Jawbone and phone and it didn't help. Any suggestions?

I recommend that you do a battery pull for your device. Please remove the battery, press and hold the power button for ten seconds. Replace the battery and power the device on. Once the device is on, try pairing the device with the Blue Tooth.

Bluetooth connection with Samsung u740 not working quite right?

I have a new Samsung u740 cell phone and I set it up to sync my contacts b/w the computer and the phone. I also set it up so when someone calls me it pops up on my computer who's calling, but when someone calls it just says "unknown caller". I have synced the contacts on both devices. Does anyone have any advice on what to do?
Thanks Taylor

With your bluetooth connection does your computer allow you to answer the calls? I am currently working on the same issue but with same problems.

Samsung Convoy 3 bluetooth connection problem

I am having connection issues with my Samsung Convoy 3 phone and Jabra Drive bluetooth. Initially the phone and device paired and connected great. I could leave the car and reconnect to the bluetooth with out an issue. Recently though, I have turned on the phone bluetooth then the Jabra Drive and they do not connect. I finally get them to connect after playing with different combinations of connecting on the phone and turning off and on the Jabra Drive. Although, it is not consistent on what combinations work. I have had to turn off the Convoy 3 and turn it back on if there was still a connection failure. Today, I had to turn the phone off and back on after the bluetooth functions were totally unavailable on the Convoy 3. Are other people having bluetooth connection issues with the Samsung Convoy 3? Is there a solution to this issue?

I have had the unit for just over 2 months and started having the issue about a month ago. Also, there is something new whick occured. When in the bluetooth menu on the phone trying to reconnect, the phone froze and rebooted (turned off and back on) by itsself. I have not tried the phone with a bluetooth headset since I do not currently have one - I would only use one in my car so I opted for an in car unit. My father has the same phone with the Jabra Drive unit and is experiencing the same problem. Other people I know are using the Jabra Drive and do not seem to be having this same issue with their phone and bluetooth unit. In the mean time, I will try to locate a bluetooth headset and see what happens.

Samsung d357 bluetooth internet connect

I'm trying to connect to the internet using PPP over a bluetooth connection to my phone. my phone is a Samsug d357
I can get the phone to start dialing, but the call always fails and the computer (an iBook running 10.4.7) says that no carrier was detected.
is there a special modem script I should be running?
is there some special procedure I'm missing?
any help would be greatly appreciated
-Erik

http://www.taniwha.org.uk/

How Do I Download Pictures From My Samsung M320 Cell Phone

Does anyone know how to get the pictures from the Samsung M320 cell phone into iTunes? I tried a USB cable but the computer doesn't seem to want to connect to the camera and do anything with it. I tried Bluetooth and while I seemed to be able to connect it to my iMac I couldn't really seem to do anything with it. I called the store I bought it from and they seemed to think the only way was to use the send picture feature which as far as I can tell I have to pay for and can only send one photo at a time. The phone does not seem to have any remoovable card or anything that the pictures are on.
Any advice?

http://datapilot.com/productdetail/89/producthl/Notempty/
That and an actual "data cable" compatible with this phone did the trick. Previously I had a "USB charging cable" from WalMart which is apparently only good for charging not for data. With Datapilot I am able to download the pictures to my hard drive. It can also work with phonebooks and calendars to some extent but I don't need to do that yet and so can't speak as to that capability.
Cheers!

Bluetooth connection problem

Using Jabra EASYCALL Bluetooth headset, but connection is working unreliable: Sometimes in the middle of the talk party is unable to hear me, I still could hear party. In this case party usually ends conversation, and then we do call again, and after re-call, party can hear you again, but at any time it could happen again.
Also sometime after pairing headset and phone phone is reporting that connected, but won't let use headset, still using phone mic/speaker. Sometimes it is enough to turn Bluetooth off/on on the phone, but sometimes I have to do this several times, optionally including headset on/off.
I'm pretty sure that this is Phone problem, because same headset is working flawlessly with older Xperia phone and also with many other phones and also.

Hi,
I use Bluetooth for my build-in carkit (Toyota Corolla Verso from 2006), my MDEX remote for my hearing aids, my Smartwatch SW2 from Sony, my Samsung Tablet (Bluetooth Tethering) and my wife's Samsung smartphone (also Bluetooth Tethering as she has an unlimited data account :-) ).
It all works great except for the MDEX: this device is no longer automatically connected when I switch it on, while before the update to 14.3.A.0.757, it was working great. Now I have to manually connect.
Phone calls over the Toyota carkit and MDEX (from WIDEX) works without any interruption (and my calls are long, some over one hour).
I suspect that it might be a compatibility issue between BT 4.1 from the Z1Compact and the Jabra headsets, something what was already the case for BT 1.0 etc. The specifications for the Headset and Handsfree Profiles within Bluetooth are being interpreted differently by various manufacturers. The SIG (the organisation which has to approve the products before a manufacturer is allowed to use the word "Bluetooth") seems to miss some flaws in the Bluetooth firmware from either Sony and/or Jabra.
For some years I had a living by testing Sony Ericsson Bluetooth products against competitor Bluetooth products and I can tell you: a lot of issues which never got solved in a good way.
Try to get your headset reflashed with the latest firmware, if all possible.
Otherwise, check the compatibility list for the Xperia Z1 Compact: here you see all Bluetooth headsets which have been tested against this phone.

Spotify losts bluetooth connection

I'm using Spotify on my Samsung Galaxy S3 (Android 4.3). Lately, when I listen to Spotify through my mobile phone, which is linked with bluetooth to a LG soundbar, the bluetooth connection breaks up after every song and it needs to be reconnected after each song. There's no such problem when using a different player (e.g. Google Play Music) with bluetooth connection.

I've been suffering for the same problem with my S3. I use Spotify connected via Bluetooth to my Volvo and once song is changed Bluetooth connection drops. Issue only occurs when using Spotify. Occasionally there is a error message "Bluetooth share has stopped working". I have made hard reset and swapped the phone, but no cure for the pain. This is very annoying issue and I have to blame Spotify for the problem.

Bluetooth connectivity with 6280

friendz,
i cannot connect my samsung wep200 bluetooth headset with my nokia 6280.plz help plz.....it says no device found but the led light in the headset says that its on

17-Jun-2006 11:02 AM
red_angel_2009 wrote:
it says no device found but the led light in the headset says that its on
The headset may be switched on but is it in pairing mode? If not, the phone will not see it and you won't be able to pair the two together.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Google Play Music not playing on Bluetooth connect

I have a SONY E2033 EG4 DUAL, I used to have a Samsung S5. On my Samsung and all other Android phones I have had, my music playlist would auto-start once connected to the car bluetooth. From a google search (ie, "android autoplay music bluetooth") all listings are how to prevent Auto-Play, so I assume this is the default behaviour. With my SONY phone, I literally have to pull the phone out of my pocket, start Google Play and hit Play. The car controls do not work by default. The bluetooth connection is working OK, but for some reason the controls are not being forwarded to Google Play Music until I start the app manually. Is there another SONY app which is taking the requests by default ? How can I override this behaviour ?

Check the SmartConnect settings

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

Lenovo A1-07 Ideapad Tablet Bluetooth connection

I am trying to connect my Lenovo A1-07 Ideapad Tablet to a Nokia 5230 phone using the bluetooth connection. Whilst I get the devices to pair they will not connect. Does anybody have any suggestions?

Hello, my lenovo ideapad a1 woudn't charge unless you plug the charger in really hard and hold it there. That is when the light comes on. I left it off but still it doesn't charge. Any help?

Nokia C5-03/Win7 Bluetooth connectivity problem

When I am trying to connect Nokia Ovi Suite to my phone using Bluetooth, the pairing process seems to succeed, except the last phase: Then I receive a message that the connection did not succeed. The wizard gives then a possibility to try again with a different ID but it fails every time.
It is the same problem if I try to pair the phone from computer's Bluetooth icon in the notification area. However, with using my laptop with XP this succeeds. Therefore I believe that my phone is OK but there is something wrong with my Bluetooth software in Win 7 computer. Nokia Ovi Suite lists it:
- Microsoft (Version: 6.1.7600, subversion: 16385)
When I start the computer, the Event Viewer shows the following error:
"The Bluetooth driver expected an HCI event with a certain size but did not receive it."
Source: BTHUSB
EventID: 5
The Microsoft's "Event Log Online Help" onthat window does not suggest anything.
However, this may be the actual reason for the problems but I do not know how to fix it.
I have tried Microsoft's "Fix it" tool but it did not fix this problem.
Any ideas what to do?

Still the same problem.
Now I installed the Nokia PC Suite and I tried to make a bluetooth connection to it.
Everything goes again well except after the last phase when I give the asked pin number in my phone, the computer ponders a while and shows then a window with the text that the phone cannot be verified.

How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
HotSync over bluetooth works successfully.
Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
I think I have narrowed my problem down to 3 things.
(1) Finding Network Access properties (to allow connected devices to access the internet)
(2) Finding Centro's Network Connection Type: PPP
(3) Finding the correct Login Script to use
for (1) I think I've looked everywhere; found nothing on Network Access.
Checked control panel: only Bluetooth Local COM
Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
Nearly all the forums that I read says to choose Connection Type: PPP.
(3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
First script:
Send: CLIENT
Send: CLIENT
Wait for: CLIENTSERVER
End:
Script 1 Connect Log:
=======================================
Connect Log
S: client
S: client
R:
Err: 0x121F <<<netErrUserCancel b/c I canceled it.
Not connected
========================================
I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
Second script:
Send CR:
Delay: 1
Send: CLIENT
Wait For: CLIENTSERVER
End
**UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
Even without the script it has problems "Signing In".
I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share. If not, please share any ideas.
Thanks!
-Eric
Post relates to: Centro (AT&T)
Message Edited by naisanza on 01-01-2009 02:26 PM

I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
Post relates to: Centro (Verizon)
Message Edited by Cogwheel on 02-13-2009 09:45 AM

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

Samsung M320 Bluetooth connection to Tx

Similar Messages

Maybe you are looking for