Samsung ml-2010 printer + Airport Extreme

I recently purchased an Airport Extreme and networked my samsung ML-2010 laser printer and a external hard drive. I have a usb hub (usb powered) connected to the AE. If i, for some reason, unplug the printer, change the toner, or turn it off then on later, the Airport will not automatically recognize it again. I have to shut off the Airport and turn it back on with the printer ON and connected for it to recognize it again. Is there any update, or fix, that would allow the Airport extreme to recognize the printer as plug and play???
Any help would be greatly appreciated!

Nobody can give me some help? I want to make sure that the printer works before buying the Airport Extreme... :P

Similar Messages

[SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

Hi. I only speak a little English. Sorry for that.
I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
Well, this is how are the things now:
$ lsusb | grep Samsung
Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 mar 4 09:56 /dev/bus/usb/002/004
$ grep usb /lib/udev/rules.d/50-udev-default.rules
# 'libusb' device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
$ sudo grep SystemGroup /etc/cups/cupsd.conf
SystemGroup sys root lp
$ groups
lp wheel games video audio optical storage scanner power users
$ cat /etc/modprobe.d/blacklist.conf
blacklist usblp
$ lsmod | grep usblp
(no output)
$ cat /etc/udev/rules.d/10-cups_device_link.rules
KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
$ cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
$ rc.d status cupsd
:: Checking cupsd status [STARTED]
$ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
cups 1.5.2-1
ghostscript 9.05-1
gsfonts 1.0.7pre44-3
gutenprint 5.2.7-3
foomatic-db 1:4.0.7_20110707-1
foomatic-db-engine 1:4.0.7_20110707-1
foomatic-db-nonfree 1:4.0.7_20110707-1
foomatic-filters 1:4.0.7_20110707-1
splix 2.0.0-11
I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
I miss archlinux, but I need to print.
What may be wrong? What may be I am missing?
Thanks a lot for your comments and help.
Last edited by felihommen (2012-03-04 20:33:39)

Solved!
Restarting cupsd didn't work.
But reinstalling cups...
$ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
$ sudo rm -r /etc/cups/*
I realize cupsd is already running:
$ ps aux | grep cupsd
root 1549 0.0 0.1 75548 4080 ? Ss 21:04 0:00 cupsd -C /etc/cups/cupsd.conf
felipe 1690 0.0 0.0 8416 1028 pts/1 S+ 21:13 0:00 grep cups
I kill it
$ sudo -SIGKILL 1549
$ ps aux | grep cupsd
felipe 1694 0.0 0.0 8416 1024 pts/1 S+ 21:13 0:00 grep cups
Ok. Reinstall cups
$ sudo pacman -S cups
Start cups daemon:
$ sudo rc.d start cupsd
Open firefox. Go to web interface, bla, bla, bla.... And it's there!
I feel really silly. It was a fresh install, so I didn't think about reinstalling.
Printed some jobs and worked perfectly. I used the gutenprint driver.
Thanks a lot, pyther. I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

Samsung CLP-315 and Airport Extreme, sporadically does not print

Hi:
I am using MacBook Pro, OS X 10.5.8, Dual-band Airport Extreme with v.7.4.2, and a Samsung CLP-315.
Previously I had Airport Express and had trouble printing. I fixed it with the workaround using HP Jetdirect with address 10.0.1.1:9101. I then upgraded to Airport Extreme and that fix did not work. I deleted the printer from Print & Fax and added again with Bonjour. Since, it has been printing sporadically. Sometimes, it simply does not print. I have tried to pin down what causes it, but I have only been able to consistently reproduce the error when trying to print from Graphic Converter. Other applications print sporadically.
I have tried to download the new drivers from Samsung, but that has not solved it. I have tried to recreate the workaround through HP Jetdirect, but I always get a "printer busy" error when printing (using both 9100 and 9101)
I also tried to run FixAirportPrinter and although the application sees the printer when launched, after running the application the same symptoms remain.
Any help on how to resolve this is greatly appreciated.
Thanks,
Rodrigo

This is to say that I have exactly the same problem with a Samsung CLP-310 unit. I have 2 Books as below.
My older powerbook has no problem printing to this printer. My newer Intel unit will not print.
If I open Airport utilities on the 10.4 Powerbook and select "Base Station options" I can see the Samsung printer under USB devices. If I repeat the process on my 10.5 Intel unit and double-click on the Airport, the properties page shows the Samsung CLP-310 but it I go to USB devices they are empty.
What gives? The SAME Airport only prints to a USB printer if it is sent from a Power PC Book?
The Samsung CLP-310 is connected directly to the USB Airport output.
Message was edited by: Eugene Baker1

USB Printing AirPort Extreme 802.11n

I've upgraded to the new AirPort Extreme 802.11n base station and am having troubles printing to printers that worked fine with my previous AirPort Extreme 802.11g base station.
Both USB printers are detectable for set-up in the Print & Fax Preference tab and can be printed to when hooked directly to my computer. They are also detectable for set-up in the Print & Fax Preference tab when hooked via the base station.
So, all set-up and settings are fine. The issue I am having which never occurred before is that the file is sent to the queue but is immediately labeled as stopped and will not print no matter what I try.
I've configured, reconfigured, reset,you name it but with no luck.
does anyone have any answers out there. Please help...

I have had the same issue repeatedly after upgrading to Leopard. I can no longer use my printer (Brother HL-2070N the "network ready one") with my airport extreme router. It used to show up before I updated to 10.5.2, now I can't even get it to show up at all. I reset the base station, unplugged, and then re-plugged in the printer, nothing worked. Then I tried to just delete it from my list of printers and re-add it, but now my computer can't find it! I didn't change anything on my network at all, and I had literally printed something just 10 minutes before I applied the update. Very frustrating for a $180 router.

Shared Printer Airport Extreme & LAN

I have a USB Canon i965 connected via USB to my imacG4. This is on a LAN that also has the Airport Extreme base station connected to it. Also on the LAN is a windowsXP machine.
Connected to the Airport is an imacG5.
I have successfully shared the printer with the XP machine using Bonjour for windows. The imacG5 (using the wireless connection)can see the G4 (verify the address etc during printer setup)but I have been unable to print from the imacG5 it says printing then "Job Stopped".
Does bonjour work with wireless connections or am I trying to do something that's impossible ?
iMacG5.1 Mac OS X (10.4.8) imacG4

I do have a router, the airport is plugged into the router.
My husband set it up but he's not a Mac person, he thinks I need to use something other than Bonjour to get the printing to work, but I can't find any alterntive ways to set up the printer. Here's the latest error essage from the logs
No log handling enabled - turning on stderr logging
snmpget: Timeout
snmpget: Timeout
2006-12-17 10:01:14.880 PrinterProxy[1265] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.print.PrinterProxy.ServiceProvider'
See /usr/include/servers/bootstrap_defs.h for the error codes.
2006-12-17 10:01:14.881 PrinterProxy[1265] CFLog (99): CFMessagePortCreateLocal(): failed to name Mach port (com.apple.print.PrinterProxy.ServiceProvider)

Canon printer & airport extreme

I just bought a canon printer & have unable to print from it through my airport extreme. I am able to print when it is directly hooked to my Mac. I contacted Canon & they said that the model (MF4350d) is not supported through a wireless connection through Airport Extreme, but it "does not necessarily mean that it will not work, but we are not able to provide configuration & troubleshooting."
From what i have been reading.... it may not be able to be done, but I thought I would see if anyone had any suggestions?? I have read through multiple posts & have tried all the troubleshooting tips, but with no success!
Help!

If you look for a printer that connects using either wireless or ethernet, you'll be way ahead of the game.
Apple does not publish a compatibility list of USB devices, so if you want to try another USB device, make sure that you can return it if it doesn't work.
And, as you are probably aware, if you buy an all-in-one device, even if it works at the USB port of the AirPort, only printing will work. Scan, fax, copy, maintenance, etc are not supported.
I understand, but cannot verify that Canon devices will not work to scan on the Mac operating system, so you might want to ask about that if you are looking at that brand.

Samsung Blu-Ray player, Airport Extreme network, and streaming Netflix

I am very frustrated. Can you help? My husband just purchased a Samsung Blu-Ray BD-P3600 player and TV. I have read all of the forums on trying to connect this to an Airport Extreme network. After several days of trying different options, I still can not get the Blu-Ray player to connect to my network and be able to stream Netflix. The only way that I have gotten close is through the wireless connection devise and putting in the IP address etc. When doing a network test, if checks the MAC Address and the IP Address, Subnet Mask, Gateway, DNS Server. It then pauses for a long time and tells me that the Gateway Ping won't work. It says, "Your network cannot operate properly." I have not had any trouble connecting any computers or printers to the network. Why can I not get this to work? Please tell me what I am doing wrong. I know just enough to be dangerous. Thank you!

Hi - I found this on CNET but not a techie so not sure if this will work - I have Airport Extreme & just bought 2 Samsung Blu-Ray BD-P3600 players to use w/NetFlix and have called Samsung tech support 3 times w/no luck - the last time the technician said that Apple/Samsung WIFI not compatible - I have a 13 character pswd so that my roommate who has a PC can connect - we don't have any problems with any other connections to Airport Extreme -
Post today from CNET discussion on same topic:
by tommyw66 - 1/6/10 4:54 PM In reply to: Samsung blu ray and Apple Airport Extreme/Express by jonmck8
found this about setting up a psp with airport should help:
"Apple does not mandate that your WEP password is the correct length. In the real world of WEP (non Apple devices) they actually require that your WEP key is a specified length dependent on the bit level of encryption. If you are using HEX or ASCII encoding these passwords can get as high as 26 to 40 characters long. Yea, thats a long pass code! Your Mac sitting in your house doesn't care about all that mumbo jumbo. You can put any old password in the AirPort Admin utility and it will take it.
I learned over at Gaming-Age that I could get away with a 13 character WEP Key. You should, however, stick with 128 bit WEP as this is better protection, and works well with the PSP (I run my AirPort Express in 802.11b/g Compatible Mode). Once you set your WEP key and update your AirPort you can setup your PSP. Now just setup your PSP for Wi-Fi Infrastructure mode"
and this:
The trick is that to use the hexadecimal key with an Apple AirPort Card, you must enter a dollar-sign before the hex number, like
$1E2B3C4FAA

Incompatibility MacPro Quad-Core 2010 and AirPort Extreme for DHCP

Hello,
I have a MacPro 2.8 Ghz Quad-Core Intel Xenon 2010 EFI 1.5, for my internet, I use an AirPort Extreme Base Station version 7.4.2.
When I try to access the internet settings of the AirPort Extreme in the DHCP, the first DHCP address does not select anything in the dropdown menu.
Here is a picture screen:
http://img210.imageshack.us/img210/4995/airportdhcp.jpg
I tried with a second MacPro Quad-core 2.8 Ghz and the error persists. By cons, with a MacBook Pro 3,1 or IMac 4.1, normally I go to the menu in question.
For it is impossible to modify the airport extreme settings with an error message that afirm the first IP address is invalid.
Unable to select because the menu is empty.
I really think a bug MacPro?
Someone does have this problem?
Thank you for your help.
Roberto
Not speaking much English text translated automatically by Google.

roberto1971 wrote:
When I try to access the internet settings of the AirPort Extreme in the DHCP, the first DHCP address does not select anything in the dropdown menu.
It is possible that the new version of AirPort Utility may help:
http://support.apple.com/kb/DL955
"Resolves an issue that caused the DHCP settings tab to display incorrectly"

Can't use my Samsung ML-2010 printer with this iMac

The software download options from Samsung for Mac do not include ML-2010. I'm glad to have a new computer, but not happy that my printer is unusable with it. The printer is, however, compatible with my year-old Acer laptop. Any suggestions would be appreciated.

Sorry, I don't have that printer to try it, but I'm fairly certain that the "Samsung GDI" open-source drivers will work (even they don't have the page updated to say 10.9)
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/samsun g-gdi#Printers
It's in 3 parts - all 3 required.
Andy_ball beat me to it!

Setting up brother printer /airport extreme

How to setup properly? It 's working only from one Mac right now. How to setup printing from the other Mac and Mini.?
Thanks

Deleted printer on Mac + add printer choose printer with "ac" on end -that one is on extreme , network , tested OK

USB printer, Airport Extreme, can set up printer but it won't print

I have an Epson 6600 connected to the AEX via USB. I can see the printer from my Macs and add it just fine but when I send something to it nothing happens. No activity light, no printing or communication error, nothing. Its like the file just goes to alphabet heaven. I've deleted and added the printer several times with no luck. If I connect directly to the printer everything prints fine. Anyone else having this issue? The AEX is using the latest firmware.

http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can't print Samsung ML-2010

Help, can't print using my Samsung ML-2010 printer. Downloaded and installed the 2.0 drivers. Still no printing.
Advice welcome.
-chris

Hi
Thank you for your response I have sorted out the problem.
I noticed it just after I posted and so I must apologise for wasting your time. It was indeed a the, er, hardware connection from the printer to the computer…
I hadn't plugged it in!
I'd thought I had but there's a bunch of USB cables at the back of the iMac and I'd plugged in the wrong one
Silly me.
Intel iMac 20" Mac OS X (10.4.9)

Samsung ML-2010 is anyone using one?

I know this could be posted in the tiger os forum, but it concerns my iMAC G5 series B.
Has anyone actually used the Samsung ML-2010 printer with this computer running OX 10.4.3? It is not clear from the Samsung website if their driver supports the latest os from Apple. I had problems with a HP all in one which had to be returned due to incompatibility with 10.4.3 and do not want to go through that again! I am aware that some HP all in ones do work, my wife has one, but that model is no longer in production. Am also aware that the Samsung is a laser printer only.
Would also like if people using this printer like it?
Thanks
Ed

Thanks, that was the kind of information I was seeking. Appreciate your response. Just ordered one from Staples online and am looking forward to trying it out (50 off helps alot).
The only problem I have really had with the iMac is mating a printer with it.
Our HP laser is not compatible, though it is far less than a year old. One HP "all in one" works, a similar model from HP does not. So I was a little gun shy about ordering a printer without talking to someone who had hands on experience with it.
BTW, I like HP printers, but their software is terrible to uninstall if the printer does not work. Uninstalling the all in one from my Dell 1100 laptop was a nightmare, had to go to mICROSOFT website to get info on deleting about half a dozen registry entries it left behind. Would not uninstall from the XP "add/remove software" utility.
Thanks Again,
Ed

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?

My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?
I have restarted all units, disconnected and reconnected

Hi ryanfromstockbridge,
I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Printing troubleshooting
Troubleshooting printer issues in OS X - Apple Support
OS X Yosemite: Add or remove a printer
Sincerely,
- Brenden

Samsung ml-2010 printer + Airport Extreme

Similar Messages

Maybe you are looking for