Samsung Monitor not receiving signal through HDMI Mini DisplayPort
I have been having issues using my Macbook Pro on an external monitor lately.
Up until a couple of days ago I was using my monitor as the primary display for my laptop and using the Bluetooth keyboard and trackpad, so my laptop has been closed. I tried to 'wake up' my mac as I usually would do but nothing happened, the monitors power light kept flashing, which is what is does when it isn't receiving a signal, so as anyone else would I investigated and found that my macbook was working the way that it normally would except it doesn't detect the external monitor at all.
I have tried changing the cable, changing the monitor from my 23" samsung display to my 42" sony tv, Restarted my mac more times that I could count and have also updated to the latest software that I possibly could.
I am going to buy a new Mini DisplayPort adapter tomorrow but I would rather just fix it with what I have if I can.
Thank you for any help that can be provided.
Check the cable does not have an air gap at either end.
Sorry ... no other ideas.
Similar Messages
-
External monitor not receiving signal
In a MacBook Pro with Mountain Lion 10.8.3 when connecting to an external monitor does not appeare to be receiving signal.
Apple support article:
Video Troubleshooting Internal and External Monitors -
External SDI Monitor Not Receiving Signal
I have been Premiere Pro CS6 with no problems in getting a video signal via SDI using the Blackmagic Ultrastudio Mini Monitor. Moving to CC I have the exact same setups, but the image will not come through to the monitor at all. (sending SDI signal to Flanders reference monitor)
All the Premiere settings in Preferences >> "Playback" and "Device Control" are identical between CS6 and CC. The Black "Desktop Video" driver is the latest version (9.9.3) and settings are same when trying CS6 and CC.
What else might open up the video output signal and be different in CC setup than CS6?
Thanks!Check the cable does not have an air gap at either end.
Sorry ... no other ideas. -
Monitor not receiving signal from computer
I have an Envy 700-074 and I bought a EVGA Geforce GTX 660 (Superclocked) video card to use with it this past July. It worked very well for the past few months until mid-September when I started having problems while play WOW (I had no problems playing other games that required more video than WOW or in doing my 3d rendering). So two days ago I contacted Blizzard support for advice and they told me to run this display driver uninstaller from guru 3d to totally remove the nvidia drivers from my computer and then reinstall them fresh. Well when I ran the driver remover program, my screen went black and now I can't get any display response at all from my computer. The monitor says it is receiving no signal from my computer. I tried with both a DVI hookup and a VGA hookup and got same response. Please tell me what I can do to fix this. I need my computer.
Hello @Eanori,
Yes re-formatting should get you your drivers back and at the very least give you a clean build to work from. I am going to provide you with all the steps to backup and recover your computer back to factory settings. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doen't get WIFI
Does it not show the presence of a wifi signal, or just not connect?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
my iphone 4 conked out.it was not receiving signal so I switched on and off. But instead of taking me to the apps page it showed ios6 and asked me to go to itunes for an update.instead of updating it asked me to restore settings.now only logo appears
Did you do the update via iTunes?
If you are only getting the logo will want to try to see if can get device in recovery mode and try the restore process via iTunes again.
If you are still unable to get the device to restore will need a repair
Out of Warranty will cost
Just a heads up -
My iphone 4 does not receive signals from my carrier
my iphone 4 does not receive signals from carrier
Tap Settings App>General>Reset>Reset Network Settings. If this not help may be Carrier problem, contact them. If still problem could be faulty iPhone.
-
My ordi do not send signal through my Hdmi to tv
I used to have an excellent connexion between my ordi and my tv through my HDMI and suddenly my Tv do not receive the signal anymore?
I was wondering if there is something to do with Mavrick? or other suggestion?
Thank youwhen I'm too use my appletv I use my tv's remote to choose the input source
in my case the hdmi 2 port
it of cause can't automatic switch because my sat box and ps2 are also sending signals too it so it don't know that I want it to show the appletv rather then any of the other connected boxes -
Hp laserjet 1300 not receive signals from computer
HP Laserjet 1300 seems not to receive signals from my computer. Please explain
This question was solved.
View Solution.Are you networked or USB cabled into from the printer into the computer?
What OS are you using?
If you are on windows 7 and networked in, then you need to check and make sure the that the IP address of the printer is listed as the same in the port settings.
If you are on windows 7 and are using a USB cable, then you have to load the printer through the IN-OS driver. See the link below...
Install the driver included in the Windows 7 operating system (OS)
If you are using some other OS or driver, please let me know.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution -
New monitor not recieving signal via DVI, ok via VGA
Hello,
I have one of the original minis (1.25 GHz, 512 MB, etc) purchased back in early 2005. Until now I've been using an old CRT display connected via VGA. This past weekend I purchased a new 20" AOC LCD monitor from Costco. I attached it with the supplied VGA cable and it worked great. The next day I picked up a DVI cable, attached it and after a minute or two the monitor found the signal and displayed a beautiful image. After five minutes the monitor lost the signal and I haven't been able to get it back since. I exchanged the DVI cable for a new one, but still can't get a pic displayed. The monitor itself is self switching. It knows if the connection is via VGA or DVI.
What am I doing wrong? Could it be the mini? The monitor?
Please help.
Thanks
DaveYes, it is a display specific issue. If you look at this Apple spec page for the original mini and do a search on the word "coherent" it will take you to the part of the spec that deals with the issue.
http://support.apple.com/kb/SP65
Apple displays are not a problem because they have always used coherent receivers. But any other monitor is a roll of the dice, especially with the original mini. The newer mini with GMA950 graphics appears to be much less affected by this even though Apple left the wording in this part of the spec unchanged between the original G4 mini and the current Intel ones. -
my iphone 4 conked out.It was not receiving cellular signal so I switched off and on.After switching on instead of taking me to the first page of apps it showed me ios6 tab and asked me to connect to itunes where it asked me to restore settings. which i did and waited for an hour and a half and later realised its got stuck. Now the phone does not respond at all and shows the logo and a half complete bar.Is there a solution to this, if at all. Am without a phone here ppl.Thanks
Did you do the update via iTunes?
If you are only getting the logo will want to try to see if can get device in recovery mode and try the restore process via iTunes again.
If you are still unable to get the device to restore will need a repair
Out of Warranty will cost
Just a heads up -
Sending and receiving Signal through Internet connection
Hello,
I want to send data that is a continuous generated signal through internet.
I want to transmit this signal live through internet technology.
I don't have any background of web development
Can anyone suggest me how could I send and receive data using internet.
RegardsHello,
I have made a basic VI using Network Stream, it send Random Number generator which i want to plot on a waveform chart on the other side.
But when i run the VI on continuous mode it gives an error as End point broken on the client side.
Kindly guide where i am lagging.
Regards
Attachments:
streams.vi 14 KB -
Not receiving messages on iPad mini
Not receiving phone messages on new iPad mini retina
The iPad can only receive iMessages from other Apple iOS devices. Is the sender using an iPhone, iPad, etc?
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
After I did a reset my gps apps will not receive a signal from my remote GPS receiver. The GPS app wa working fine before. I reloaded the app but no luck. My remote GPS receiver is paired to my iPad and has a strong signal.
Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help -
ATV2 not giving signal to HDMI TV suddenly- Ideas?
My ATV2 has always worked well, but suddenly the TV does not get signal. All conenctors checked, reset, etc.
Ideas?Welcome to the Apple Community.
Have you tried another cable or tested the Apple TV with another TV.
Maybe you are looking for
-
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please. Already gone through troubleshooting guide a zillion times. Thanks.
-
How do I create a barcode in illustrator
Hi, How would I go about creating a Barcode in Illustrator? I used to work in Corel Draw where it had the option of creating a Barcode, now I am uncertain how to do it in Illustrator. Thank you for your help!
-
I cannot get the thumbnails for my catalogue. I have tried downloading the Lightroom program again and it tried to fix it but could not. I have gone to the page to check off thumb nail and that hasn't made any difference. I have the most recent up
-
I used to be able to select an object and copy it from one pdf to another. I now have Adobe Standard 10 and have been unable to. I can copy the object to the clipboard and the paste is greyed out. Any ideas?
-
Wildcard certificate Apache2 NW & Apple Safari
http://blog.boxedice.com/2009/05/11/...-on-macsafari/ It seems that the SSLCertificateChainFile /etc/httpd/ssl/gd_bundle.crt needs to be included, which is easy with Linux version, but how does one do it on NetWare? Thanks Seb