Samsung monitor working well only sometimes
I have Mac Mini 2011 with the Samsung SyncMaster T24B350 monitor. Sometimes it works well, but also sometimes I have problems for starting up the machine. The image appears to be stripped and distorted. It fixes sometimes when I restart the machine, but sometimes I must restart it three or four times until it gets functioning well.
I tried all the configurations: the PC cable, the HDMI cable, and the problem continues to appear.
Tr resetting the VRAM
About NVRAM and PRAM
Similar Messages
-
Works well only on charging!
I m having this problem from past one and a half year its been two years since i have purshased this Pavilion g6 2102TX. It only works well when it is on charging otherwise it hangs. Because of this i have to put it on charging while i work! Its fan also stars at very high speed & then becomes normal. Please suggest what sholud i do regarding this problem. PLEASE HELP !
Hi
Please try to update the Bios & Chipset driver from the website restart the unit and have it checked.
Bios Link
Driver Chipset
Intel MEI
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Recently I have found that when in FB- the 'send' or 'comment' buttons do NOT work. I have also just found that the X along side a post - to get the dropdown to hide, etc- does not work either.
I have logged of and back on. I have closed firefox and restarted. I have cleared cache, cookies, etc. and then restarted firefox. Nothing works. It seems like this happened a few times and when I came back to the computer after several hours, it was ok. Most of the time I have to reboot.
While this is happening, some other functions work fine. For instance, if I click on HOME or PROFILE it works. Only seems to be the 'buttons'.
What's making me really crazy is that it is intermittent! And when it happens, if I open IE (ugh) it works fine.
Only fixes found at FB are to clear cache, cookies, etc. which I have already stated do nothing at all. Any ideas?Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Video playback on external monitor working. Only works when Print to Video
I'm having a problem. I'm using FCP 5. When editing, my video playback is not showing up on my external monitor (Sharp MiniDV camcorder). It does however show up on the external monitor when I "Print to Video." This is the first time using FCP 5. I never had this problem with previous versions of FCP. Can anyone tell me whats going on? Thanks
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane -
PB display works, but only sometimes. Any thoughts?
The computer is an older PB G4 Titanium 500Mhz. Currently running OS X 10.4, though I am in the process of a second erase and installing 9.1 that came with it.
Out of nowhere last week the screen just froze, on restart it was completely black. But after turning it on and off a few times the screen will appear, but it will freeze within a half hour or so of use. I have erased the drive and reinstalled a new system, ran the Hardware Test, replaced the battery(as it wasn't holding a charge), and the power cord which was showing signs of wear.
I don't believe it is the inverter as the screen is not even faint, it's completely "off", no sleep light etc. The only thing that I am able to do on a consistent basis is start up from the installer CD. This is what leads me to believe it's not the display itself. But at this point I am beyond baffled.
Anyone encounter a similar issue or have any idea what could be going on?Apologies, wrong board.
-
When I had iOS 7, my apps worked perfectly. But ever since iOS 7.0.2, some of my apps haven't worked! It's bugging me. Can you help?
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
VBA is working well only with step by step method pressing F8 key
Hi
Something is gonig on with my E-tester, I made a script with VBA in some pages and typed some slobal procedures and variables in ThisScript page:
Let me picture this, for example I have this in page 2:
Private Sub RSWVBAPage_afterPlay()
ThisScript.PrintVersTxT ("Click here for a printable version")
RSWApp.WriteToLog ThisScript.actionTXT, ThisScript.resultTXT, ThisScript.summaryTXT, True
If ThisScript.PrintVersFunc("Main_Table", "Table", "id") Then
RSWApp.WriteToLog ThisScript.actionFunc, ThisScript.resultFunc, ThisScript.summaryFunc, True
End If
End Sub
And I have this in "ThisScript" Page:
Public actionTXT As String
Public resultTXT As String
Public summaryTXT As String
Public actionFunc As String
Public resultFunc As String
Public summaryFunc As String
Public Function PrintVersFunc(Patt As String, TblName As String, Prop As String) As Boolean
Dim tbl As HTMLTable
Set tbl = RSWApp.om.FindElement(Patt, TblName, Prop)
If tbl.Width = "100%" Then
actionFunc = "Print Version"
resultFunc = "Failed"
summaryFunc = "Printable Version fuctionality is NOT working"
Else
actionFunc = "Print Version"
resultFunc = "Passed"
summaryFunc = "Printable Version fuctionality is working"
End If
PrintVersFunc = True
End Function
Public Sub PrintVersTxT(LinkTXT As String)
Dim mouse As HTMLLinkElement
If RSWApp.FindInHtml(LinkTXT) Then
actionTXT = "Text Found"
resultTXT = "Passed"
summaryTXT = "Text for Print Version is Present"
Set mouse = RSWApp.om.FindElement("javascript:reformatPage()", "A", "href")
mouse.click
Else
actionTXT = "Text NOT Found"
resultTXT = "Failed"
summaryTXT = "Text for Print Version link is missing"
End If
End Sub
So in the second page I called first the function ThisScript.PrintVersTxT to see if the string I send as a parameter is in the html page, if it so, the function click on the link I wanted to click on, then after that I called function ThisScript.PrintVersFunc this function is going to check if a table change its size(it should be different of 100%) after I clicked on the previous link, if the table changed, this function stores in actionFunc="Print Version", in resultFunc="Passed" and in summaryFunc="Printable Version fuctionality is working"
So I am talking about this part of the code
If tbl.Width = "100%" Then
actionFunc = "Print Version"
resultFunc = "Failed"
summaryFunc = "Printable Version fuctionality is NOT working"
Else
actionFunc = "Print Version"
resultFunc = "Passed"
summaryFunc = "Printable Version fuctionality is working"
End If
I know that the table changed its size from 100% to 85%, but if I let running the script until the end, the e-tester goes to the "ELSE" part and if I run the script step by step with breakpoint in the code the E-tester goes to the first part of the "if".
E-tester should goto the first part of the "IF" whatever the runnig method be, but it does not.
What could be the problem?? is there a especial setting in the e-tester to resolve this?Yes, I am going to print the table width out with the WriteToLog function, but the weird thing here is that if you put a breakpoint to run the code step by step everything is ok, I mean the code recognize that the table width had changed, otherwise the e-tester does not recognize it
I'll let you know how is this going... thank you for your help -
My GT70's backlit keyboard doesn't work well
DISPLAY: 17.3" Full HD Anti-Reflective 1920 x 1080
CPU / PROCESSOR: Intel® Core™ i7-3630QM Quad Core Processor (6M Cache, 2.40GHz - 3.40 GHz) 45W
GRAPHICS / VIDEO CARD: NVIDIA Geforce GTX 675MX 4GB
SYSTEM MEMORY: 16GB (4x4GB) DDR3 1600MHz RAM
HDD: 128GB mSATA SSD + 750GB 7200rpm Hard Disk Drive
OPERATING SYSTEM: Windows 8 64bit
KEYBOARD: Steel Series Gaming Backlit 102-Keys & Touchpad
AUDIO & SPEAKERS: Dynaudio Tech Speakers x 2 + Subwoofer x 1
WLAN: Built-in 802.11b/g/n WLAN
CARD READER: 7-in-1 Card Reader (SD/SDHC/SDXC/XD/MSPRO/MS/MMC)
USB PORTS: 2 x USB 2.0, 3 x USB 3.0
DISPLAY INTERFACES: 1 x HDMI 1 x VGA
OTHER PORTS: 1 x E-SATA, 1 x Microphone-in Jack, 1 x Headphone-out Jack
ETHERNET: 1 x RJ45 LAN
OPTICAL DRIVE: Blu-Ray Reader & DVD+/-R/RW Combo Drive
BATTERY: 9 Cells
Well... my 11 months old GT70 got only problem with backlit keyboard.
it worked well until 2 months ago, but it suddenly didnt work well
Only right side of keyboard has light.. but left and middle side has really dim light.
Also, there's some color that doesnt work. when i set to white color it just comes with purple. orange becomes purple, green becomes blue.
i already reinstalled the KLM (keyboard LED manager), but still doesnt work.
tried with other color
Same..
color problem..If you can't provide more information than that, we can't really help you.
Provide more details via : >>Posting Guide<<
If you can't do that, then contact MSI.
>>How to contact MSI.<< -
IOS6 cell data not working well
Ever since upgrading to iOS6 my cell data is not working well. Sometimes it works great and sometimes it wont work all day long. I generally have Wifi around so it hasn't been a huge deal, but when I am out and about it gets annoying really quick. Things I've tried when the phone's data is not working:
Go into my phone's settings turn cell data off, and then back on
Turning the phone off
Resting my phone's network settings
Does anyone have suggestions about this?take the SIM card out and re-seat it.
Call AT&T and see if they see any issues on their end.
Contact Apple support;. -
Does Safari's Mountain Lion Now Work Well Flash and Youtube
Hi. Usually when I use youtube (Flash but I did join its HTML5 trial) on Lion's Safari 6, it would have errors. Sometimes It would play but it wouldn't move (the red line below). Sometimes I've cached a video to full by pausing the youtube video but when I play it again, it has to download or cache the video again. Youtube on Flash just messes us more (it does mess up with Chrome too and Firefox but not that often). If all's good with youtube, I guess I should buy Mountain Lion.
Thank you in advance.
Gbu.It works well. Sometimes it has a problem, but Flash is stable
-
Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!
Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!
Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
Working on an external monitor as well as the macbook screen
Hello,
When working on an external monitor as well as the macbook screen is there anyway you can have the top bar (with file, edit ect) on the second monitor also?
Im using a macbook with mountain lion if that helps.
Many thanks,
ChrisYes.
System Preferences > Displays > Arrangement Tab
Then one of the monitors should be displaying this screen:
You can put your cursor on that white bar (shown on the blue box to the left) and drag it over to the right if that is where you want the menu bar.
I have mine set up here with my external monitor to the left and the MBPro to the right with my Menu Bar on my external screen as shown by the white bar being on top of the left blue square above.
Hope this helps.
Update:
I misread your question I believe.
If you want the menu bar to be on BOTH screens at the same time you need to have Mirror Displays checked so that the same image is on both screens. That is the only way.
Message was edited by: sdpitbull to add Update section. -
Monitor, Keyboard and Mouse sometimes stop Working
I'm having an issue with my computer, it is a new build on a MSI 890FXA-GD65 motherboard. Sometimes randomly while i play a game, my monitor goes to sleep and wont wake up (monitor is connected via VGA port to my Radeon HD 5670 GPU), my keyboard and mouse turn off(both usb, mouse is Logitech, the red light on the bottom turns off), the computer still runs all the lights are on. Also, the front panel reset and power buttons wont work, the only way to shut it off is by the power switch on my power supply. Any ideas as to what might be the problem?
Quote from: Svet on 21-July-11, 03:02:11
Run CPU-Z http://www.cpuid.com/downloads/cpu-z/1.58-setup-en.exe
and show screenshots from memory and spd pages
Quote from: romie_rome on 29-July-11, 10:09:27
It was set to 1333 by default, everything in BIOS regarding memory is on auto.
By romie_rome at 2011-07-28
By romie_rome at 2011-07-28
Switch command rate to 2T in BIOS Setup,
then retest -
What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).
Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable. -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.
Maybe you are looking for
-
How do I transfer an Ipod to a new laptop?
I recently bought my wife a new Dell XPS Windows XP laptop for Christmas. I want to transfer her over to using the laptop for her iPod mini, including all of her music in iTunes on the desktop. I was also curious how the Consolidate Library command w
-
Download report/dashboard in pdf..
Hi experts, 1.How to download reports in pdf format. 2. How to download whole Dashboard. S
-
Access PSPAR in USER EXIT EXIT_SAPFP50M_001 - include ZXPADU01
Hi, Is it possible to access PSPAR in include ZXPADU01???? (PBAS0001 Enhancement) I want the variable ACTIO from PSPAR. In debugging mode when i tried ()PSPAR-ACTIO it s working, but when i tried it in report, showing error. ( '(' must follewed by a
-
Hi, I don't know why, once in a while my Java plugin is either not working, either missing or don't know what the **** is going on it with it but I can't use it. I have tried to install Java 7 and it worked, but I need another version because I am us
-
Drag and drop iPhotos are not appearing in photo stream??
Hello, I am trying to drag and drop pics from iPhotos in to photo stream however they are not appearing in the stream? Although when taken with my iphone they do appear? A little confused, help would be appreciated H