Samsung Multifunc Printer CLX 3185 FW

Hy everybody.
I´m fm Sao Paulo, Brazil.
Do you know if Samsung CLX 3185 FW Laser Printer Multifunc is compatible to Ipad, Iphone ?
Thks n Rgds,
Marcio.

Nope. Below is the link to the list of airprint printers.
But look in the app store for an alternate printing app such as printopia, or print and share that route the print job through your computer.
http://support.apple.com/kb/ht4356

Similar Messages

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

Hi Paolo,
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

Cannot print with a Samsung ML2160 printer (mono laser) and Pages. Print function doesn't work, only drag and drop in printer's queue

Hello,
I just purchased a Samsung ML2160 printer and it doesn't work with nor my Pages program, nor the Preview (to print PDF). No matter the way I tried, the Print function doesn't work and I cannot neither print or even enter the printer preferrences menu! My MacBook Pro has worked before with other printers, but now with the Samsung it doesn't work at all... Though, if I drag and drop a document, jpg, pdf in the printer queue, it prints just fine, but that method gives me absolutely no freedom to the printing... Could it be something from the Computer -> Machintosh HD -> Library -> Printers? Because a friend of mine was recently trying to save me some disk space, and therefore erasing part of the HP printer (to remove the previous printer I owned)...
If anyone has any idea, that would be much appreciated
Thank you in advance

Do the sensible thing, as you say neither Preview nor Pages print, try other programs eg TextEdit. If none of them print then it is a System problem and very likely the printer drivers are AWOL or were never installed.
Go to Samsung's website and download their software for the Mac:
http://www.samsung.com/uk/consumer/print-solutions/print-solutions/mono-printers /ML-2160/XEU-support
http://www.samsung.com/uk/support/model/ML-2160/XEU-downloads
Peter

HT4356 I was gifted a new Samsung wireless printer model ML-2165W, it works with my desk top and lap top but can't get it to work with IPad. Did I just receive a "boat anchor" printer in the eyes of Apple?

I was recently gifted a new Samsung wireless printer Model # ML-2165W and while it works fine with all my computers, I can't make it print from my IPAD. Was I given a "boat anchor" in the eyes of Apple?

It looks like your printer isn't on the list of air print enabled printers. It'll still work, you just need to do some tweaking.
You can see if samsung has any apps to enable printing.
or
You can look into a third party app like Print n Share or Print Central.
Then you can print from your iPad.

Samsung WiFi printer can't connect to new Quantum Gateway router?!

We recently replaced our 3-year-old router with the latest Quantum Gateway router and upgraded fios speed from 25/25 to 50/50.
Every device (PC, phones, tablets, and TV) was able to connect to the new network. BUT, our Samsung Wifi printer (M283x seriers) cannot connect at all. With the older router, we were able to access the printer thru Wifi network from two different PCs..
We did not relocate the router and we did not move the printer, so singal strength was not the issue. We even uninstalled and then re-install printer driver to PC to set up the network again. Tried every connecting option that Samsung had suggested, but everything failed.
We also tried to log in to Router Admin site to add this printer, didn't work. WPS was turned on and we couldn't figure out why this new network doesn't add the printer. This router did not like our printer.
One funny thing was that if we turned OFF all the security settings, the router allowed this device to connect to WiFi.
Can anyone help? Thanks a lot!
Solved!
Go to Solution.

I have a solution for you. After upgrading to the Quantum Gateway last week, My Samsung 2835 printer had the same problem. It turns out that the printer doesn't play well with the Quantum Gateway when the Samsung "Wi-Fi Direct" function is enabled. All you have to do is log in to the printer web page. Then, under Settings--> Network Settings--> Wi-Fi Direct... Turn Wi-Fi Direct off using the drop down menu. Hit "Apply", then power cycle the printer. After this you can use WPS or manually configure the printer and it will connect right away. Thank the Verizon technical guy J.W. for figuring this one out by capturing the Wi-Fi traffic between the Gateway and printer.

Samsung laser printer can't print via Airport

I can no longer get my Samsung laser printer (ML-1210) to print via my Airport Extreme Base Station network. All I get is the Printer Center telling me that it can't find the printer. Prior to OS X 10.4.4 and Airport Firmware update 5.7 no problems, after OS X 10.4.4 and Airport Firmware update 5.7 some types of documents (.pdf) would print sometime and some types (.rtd) wouldn't print at all. After OS X 10.4.5 nothing prints.
So far a direct USB connection seems to print OK, as far as regular text files (Rich, and Plain) are concerned.

I tried so many things I'm dizzy. Nothing done to the computer, not even clean installing OS 10.4 on an external HD and booting from that worked. What seems to have finally worked (????) was reverting the AEBS Firmware version down to version 5.5.1.
Since I print so infrequently I'm not going to say it's all OK until I do some more testing/printing.
In the mean time if anyone can give me an specific idea why this conflict may be happening and what else I can do to fix it without running my AEBS with older Firmware I would be grateful.
The latest driver for Samaung ML-1210 is a couple of years old and I think it is a proprietary code (not something standard like PostScript).
I'm not sure if it's only the AEBS Firmware or a combination of conflicts between the "OS Version-Printer Driver-AEBS Firmware".
Thanks.

Inability to print to networked Samsung M2825DW Printer from IE 11

I recently installed a Samsung M2825 printer on my network. Now I'm unable to print to that printer from IE 11. I get the following error message:
"There was an internal error and Internet explorer is unable to print this document."
I can print to my other printers (HP Photosmart and HP LaserJet) but not to the Samsung. Furthermore, I can print to all three printers without difficulty from Firefox 26.0.
I'm running Windows 7 Pro SP 1, 32 Bit.
Any suggestions?

Hi,
Have you tried printing a webpage running IE as an administrator?
Also, third party extensions or add-ons can affect printing from IE. So i recommend you attempt to run in No Add-on mode to try printing.
Thanks!
Andy Altmann
TechNet Community Support

Can anyone help with a Samsung xpression printer?

I have just bought a Samsung xpression printer and although I can print easily on A4 paper, I have NO idea where to load photo paper (size L) and what setting to put it on. Can anyone please?
Thanks in advance!

Contact Samsung support.

Samsung CLP300 prints via old G4 Power(10.4) but not with MacBook (10.5.5)

I bought an Airport Express so I wouldn't have to keep my old power-hogging G4 running as a print server. If I try and print wirelessly to my Samsung CLP300 printer with the G4, it works fine. But when I try and print via my MacBook (10.5.5), the print queue just stalls at a certain percentage. The only solution I've found is to unplug the Airport Express and then plug it in again, but schlepping up to my 3rd floor and waiting 5 mins for the Airport Express to start up can be a real PITA.
Any solutions?

I'm also having issues with Airport Express 802.11b/g, firmware 6.3 that used to worked fine with my Brother MFC-2040 in 10.4 but now struggles in 10.5 with my new Samsung SCX-4300. Like you, it will print one job fine, then it stalls on the next. Printer dialog shows "Printing page 1, 14% complete..." Then it gives up and the dialog shows "Printer Paused". When I resume the printer and resume the job, an error message pops up, "Operation Could not be completed. client-error-not-possible". But when I click OK, the dialog returns that shows "Printing page 1, 14% complete"
I reinstalled the latest printer driver (1.2), deleted the old printer profiles and created new ones for the printer, and followed the directions on the Airport printing troubleshooting guide. I had no problems printing on a Brother MFC-2040 with OS X 10.4. I suspect this is a Leopard issue. Any thoughts?

20" Intel iMac and Samsung Laser Printer

I ordered my new 20" Intel iMac last Saturday, the 14th. From day one, it said estimated ship was Jan. 24th. Yesterday I checked the status and it still said the 24th, but it also said estimated delivery for Jan. 31st. I was sad because when i ordered it, it said estimated ship 3-5 business days. Jan. 24th would be longer than that. So I checked my e-mail this morning, and lo and behold, I have an e-mail from Apple saying my new computer shipped out this morning, making it 5 business days since I ordered it (4 if they considered Monday a holiday). I just wanted to reassure others that the ship date may not be as late as it's estimated.
My question is this... I have a Samsung laser printer (the ML-1740) hooked up to my fiance's Windows XP machine. My Sony Vaio desktop (which I'm giving to my mom) can see the printer just fine. It prints just as if it was hooked up to it. My Powerbook however, cannot see the Samsung printer over the network. I'm a nursing student and print out tons of text only stuff, so I really need to use the laser printer with my new Mac. I've see a lot of different discussions on Mac drivers for this particular model, but I haven't tried any of them on my Powerbook, and I'm curious as to whether or not any of them would even work with the new Intel Mac. My other question is whether or not there is any way I can get my iMac to see the printer on the Windows. I don't necessarily have to install drivers on the Mac if I don't need to. I just need a solution to make it work. If I have to install something, that's fine. If I can just make it print over the network, that's great too. I don't ever use any of the settings the Samsung software provides, so just basic printing is fine. I just don't want to have to e-mail all my documents to myself and then go to the Windows machine to have to print. I apologize if any of this is confusing. What are some of the things I can try to make this work? Or can someone point me in another direction to get the answers. I was stupid in not realizing that the printer didn't support Mac OS X when I bought it, even though I already have one Mac. Thanks so much! I love these forums!

My shipping was the same way, maybe they had a supply shortage of RAM or just a long queue of computers waiting for upgrades and not enough people to perform them. Mine shipped today with an estimate of for the 25th.
I have looked around on Apples site and couldn't find anything about supported printers. You will have to install some form of driver on the Mac. You will have to make sure the PC has it shared correctly. Read about printer sharing in the windows help files. I don't know any more off hand.

Samsung CLP310 printer- printing word doc problem

i have had a Samsung CLP310 printer for a while and its worked perfectly, however, just recently it has not allowed me to print word.doc files , i have to convert them first to a pdf and then print.
Does anyone know if there has been a change to the driver or if i have downloaded a recent universal software upgrade that has mucked things up? Any advice well.
(I have tried the reset printers options etc..)
Many thanks

I'm having the same exact problem but can't seem to get ANY response!! The link below was never responded to so I copied it here. IS THERE A WAY TO MAKE ADOBE USE THE "HP" DRIVER AND NOT THE XEROX?????
http://www.adobeforums.com/webx/.59b4e3da/1
We have a similar problem with 2007 Excel files embedded in Autodesk Inventor 2008. The pdf preview will look fine, but the PDF file has the black box that you are talking about. Also happens when we print to a Xerox Phaser 7300. When we print to a "HP designjet 800" it will print fine. Does it has something to do with the Xerox printer driver???? We have all the latest updates we beleive? We started with Acrobat Adobe 8.1.1, a new install shouldn't have to install 8.0 first should it?
Specs: O.S.: XP Pro x64 Edition Version 2003 sp3
Machine: H.P. xw9300 Workstation, AMD Opteron Processor 250,
2.39 GHz, 4.00 GB of RAM
Video: NVIDIA Quadro FX 3450/4000 SDI with driver version 9.1.3.6 running D3D in Inv.
With NVIDIA Desktop Manager disabled
3D navigator: 3DConnexion - Spaceball 5000 Driver Ver. 6.3.3

TS1253 airport express can not find a driver for my my Samsung CLX-3185 connected with a USB. I can see the printer and it tells me that driver is available but then it can not find it.

I can see and download the driver from the net but it does not help the Airport Express. What can I do?

Thanks for your answer.
actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do.

Connect Mavericks 10.9.1 to a Samsung printer clx-3300

Good morning. I need to connect Sampsung Printer of the clx-3300 serie to an apple macboock pro with os x mavericks . do anybody have the drivers available? Thanks

Hi there Ubifranz,
I would recommend taking a look at the information found in the article below.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X is compatible with most common printers and downloads the latest printer software automatically. To make sure you have the latest software, don’t install the software that came with the printer or from the manufacturer’s website.
When you add a printer, OS X can usually detect whether the printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can’t, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer’s installed accessories so you can take full advantage of them.
-Griff W.

CONNECT NOKIA E71 TO SAMSUNG WIFI PRINTER. WHAT SE...

hi,
Does any one know how to connect to the SAMSUNG clx- 3175 printer WIFI ENABLED. It is connected to a router, of which an acces point is set. just need to know what options to select for DRIVER, BEARER, HOST/QUEUEU, and what these fields require.
i could despretly use some great help.
thanks in advanced.

Check page 74 on the user guide!
Nokia E71 User Guide
Good luck!
Message Edited by illinjah on 31-Jul-2009 10:39 PM
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Samsung Multifunc Printer CLX 3185 FW

Similar Messages

Maybe you are looking for