Samsung Note 3 update

I just completed Samsung Note 3 required software update and now the time showing on the top of my phone is incorrect.  The first number of the hour is not being shown. (example:  correct time is 11:33 but it shows 1:33.....another example: correct time was 10:35 but it showed 0:35).  Please fix!

Lets ensure your device is running reliably! Have you attempted to power cycle your device?
YosefT_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

  • Samsung note 3 is not giving audible alerts for all my text messages since the 4.4.4 update.

    Samsung note 3 is not giving audible alerts for all my text messages since the 4.4.4 update.  I get an audible tone about 3/4 of the time.  Thinking a conversation is over I come back 45 minutes later to find another text I didn't know came in.  I've restarted my phone and checked my message settings.   Any ideas?  Factory reset is not an option!

    I'd try going back into the Text Message settings. In Sound setting, work the setting from None to an alert. Then in Vibrate put a check in the box then uncheck. Just to see if that will free it up, could be a possible corruption with the new software update?

  • Will there be an update for the samsung note 10.1?

    I know that an update came out, but where is the update for my samsung note 10.1?

    With it being on Verizon and Samsung, I believe it will be a long wait for an update.

  • Samsung galaxy s3 - updated to KK. Now email on phone does not work. Email worked perfectly prior to s/w update. What do i need to do to get email to function again?

    samsung galaxy s3 - updated to KK yesterday. Now email on phone does not receive messages. Email worked perfectly prior to s/w update. Have turned sync on and off - no change. Nothing has changed w/ email settings either. What needs to be done to get email to function properly again?

        raadga Emails are important! Let's get your Comcast account working again. Go to the email account then select the menu for settings. If "sync only over wifi" is on then uncheck the box. If this is not an option, then you would want to delete and readd the email account to the phone. Please keep us posted.
    Sheritah_vzw
    Follow us on Twitter
    @VZWSupport

  • When I try to use Firefox Browser on my Samsung Note 3, the screen comes up white after the orange bar runs across the top. It worked yesterday.

    March, 9th, 2015 -- My Samsung Note 3 is on AT&T wireless, but I Have Xfinity wi-fi at home. Firefox browser worked yesterday & last night. Today when I search it comes up with a blank white screen after the orange bar runs across the top & never loads anything (words or pictures). When I open the tabs in the side bar, it shows the pictures for them, but still only loads a white page after clicking actual link. It will not sync the last few saved bookmarks with my computer. I made sure that I have the latest android version installed, but It still does this even after uninstalling & re-installing & restarting the phone. AT&T had an update a couple of days ago & I've already talked with their tech support with no resolution. I don't know if there is conflict with AT&T's update & current Android Firefox browser. Please Fix, thank you.

    Yes, it does the same thing whether on wi-fi or 4G.

  • Samsung Note 3 Lollipop Stuck at Searching For Service...

    I have terrible signal strength at work and often completely lose cell reception.  Ever since I've updated my Samsung Note 3 to 5.0, whenever I completely lose cell signal for hours and I go outside, my phone will not pick up the mobile network again.  It's stuck at the "Searching For Service" part.  I have to restart my phone and I'm immediately back on the mobile network.  On 4.4.3, it would pick back up in a few seconds once I step outside. 

    siyang99,
    Thanks for the additional info! I can definitely understand your concern. Being able to use your phone for work is definitely important.
    You mentioned the issue is only at work and the hard reset has not helped. If the issue were due to software you would experience the same issues everywhere. We are unable to guarantee service indoors because there are many factors out of control that can interfere with the signal. But I definitely want to further assist since you have been able to use your phone there before.
    I checked the coverage in that area and show good coverage. What's the signal strength on your phone when at work http://www.verizonwireless.com/support/knowledge-base-88700/? We can try replacing your SIM card to see if you notice an improvement. You can get the sim card replaced at a VZW store for free or we can order and send one out to you.
    JohnB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Malware or virus on Samsung Note II?

    Anybody had a phone taken over by malware or a virus?  Are Samsung Note IIs a target of viruses or malware?  My phone came up with a screen message "don't turn off target" and was unresponsive.  It had been plugged in for hours and had not charged at all. When I found it it was inresponsive to any commands.  I unplugged the phone and removed the battery.  It then was responsive but said battery was critically low.  I turned it off and plugged it in multiple times and each time it turned itself on and quit charging and said battery was critically low. Anybody seen anything like this?

    Were you running antivirus software on your phone before this happen? What phone are you using? Have you installed any new apps or had any updates? Need more detailed information.

  • How do I install flash player on my samsung note 10.1

    How do I install flash player on my samsung note 10.1

    Officially you can't. If a device doesn't come with FP, then it isn't certified to run FP.  PCNEXUS has a work around, search their site.
    http://blogs.adobe.com/flashplayer/2012/06/flash-player-and-android-update.html

  • When I try to download a pdf file it turns into a .do file and can't be opened by my Samsung note 3

    When I try to download a pdf file it turns into a .do file and can't be opened by my Samsung note 3. Once downloaded the file can't be found in any part of the device memory and can't be opened by the browser mozilla.

    Hello there,
    Have you checked if your PDF Plugins are updated? https://www.mozilla.org/en-US/plugincheck/
    For more options: https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them
    Hope this helps!

  • Can not insert/update data from table which is created from view

    Hi all
    I'm using Oracle database 11g
    I've created table from view as the following command:
    Create table table_new as select * from View_Old
    I can insert/update data into table_new by command line.
    But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
    Anybody tell me, what's happend? cause?
    Thankyou
    thiensu
    Edited by: user8248216 on May 5, 2011 8:54 PM
    Edited by: user8248216 on May 5, 2011 8:55 PM

    I can insert/update data into table_new by command line.
    But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK?

  • 544 Movement ,Qty & value is not getting updated in MC.9

    Dear friends,
    MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting   G  in OMJJ.
    I require the info about MC.9 configuration or any info related to this.

    Hi,
    Please refer SAP note 581240 for this.
    For these stocks you have three valuation types for selection:
    ' ' = no inventory valuation
    'A' valuation = without reference to sales document ('make-to-stock
    inventory')
    'M' = separate valuation with reference to the sales and distribution
    document/project
    ONLY stock/stock movements with special stock valuation 'A'
    (make-to-stock inventory) are updated in Inventory Controlling.
    Thus, if you find a document which is not updated in the info structures
    of Inventory Controlling (S031-S039) and you require this, check the
    corresponding documents in the materials management tables. You can find
    the special stock indicator and indicator of the valuation of the
    special stock, for example, in document segment table MSEG in the
    following fields:
    MSEG-SOBKZ = Special Stock Indicator
    MSEG-KZBWS = Indicator: Special Stock Valuation
    Only A type (make to stock ) are updated in the info structures.
    Hoping this helps.
    Regards,
    Rajesh.

  • Master Data is not Getting Updated Properly.

    Dear Expert,
    I am trying to pull the data by Info package but The text is not getting updated.
    The Master data object is    0BPARTNER .  To update this Master data , we ghave 2 info packages
    0BPARTNER_ATTR   and    0BPARTNER_TEXT.    But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
    What could be the Reason for this and How can I solve this issue  ?
    Tahnks,
    Utpal

    Hi,
    Could you please check the data in RSA3.
    If everything is there in R/3 side.Then,please check are you giving any
    condition in the infopackage .
    Please run the infopackage without giving any condition.
    Thanks,
    Saveen Kumar

  • Tax is not getting updated in Sales Order Pricing Conditions

    Hi ,
    Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
    Following are the changes for in the standard Pricing:
    1) Created ZPSC condition type to calculate the sur-charge from Z-table
    2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
    So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
    We implemented the logic for updating values of  Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
    I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
    Please suggest how to update the Tax values correctly without manual update.
    Thanks ,
    Rajesh Sanapala.

    Hi Lakshmi,
    I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
    I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
    Thanks
    Ivy

  • Data is not getting updated in CRM

    HI experts,
    I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
    why this is happening?
    Is there any BDOC used in this case then how we can check that BDOC?
    Thanks,
    Jassi

    Hello
    I am sure that the problem occurs due to this.
    You need to know the error message. To do this:
    1) Choose any red document from transaction SMW01
    2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
    3) In the opening window there is a button "Errors". There is where you can find the error message.
    I hope it helps. Please, provide points if helpful.
    Joaquin

  • Data is not getting updated in table using RFC

    Hi Experts,
    In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
    Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
    Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
    Regards,
    Sari

    HI Sari,
    as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
    -- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
    -- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
    Thanks,
    Bhupesh

Maybe you are looking for