Samsung Note 4 issue opening Security in Settings
I just got the phone yesterday and after setting everything up I cannot access Security settings in Settings. When I select Security a message comes up "Unfortunately Settings has stopped". I had the Fingerprint unlock activated so I turned that off and it still is happening and I tried to restart the device and it still will not open.
I just chatted with VZW support and found a work around until they fix or narrow down the culprit app. The rep had me start the phone in safe mode by holding the power button in and when the options appear press and hold power off icon until restart in safe mode appears, select to restart in safe mode. When I did this I could access Security from Settings. Restart the phone again to exit safe mode. Hope this helps. According to this result it appears one of the apps I downloaded is impacting the Security Settings. You can do a reset but before doing so you have to set the phone up so it does not restore previous apps so you can add them one at a time to see which one is impacting the Security Settings. I will put that off for now and hope the next update fixes this. I do not want to set everything up again so soon after investing so much time doing so just these past two days.
Similar Messages
-
Not able to open secure web pages
Hi Members,
Their seems to be some problem with my internet. I hope i can get some answer to it. After i had my firmware update for my macbook (leopard 10.5.2 combo updated), it became very slow and gave me kernel panic. Last week i had to format my HDD and re-installed Mac OSX. Now i see some very serious problem. Neither i can use my macbook to log in to dicussion forum and not able to open any secure websites like facebook.com, hi5.com and microsoft.com and support.apple.com. Its pulling my nerves.
Kindly Help.
Regards
VikramThank you so much for the helpful information. Let me tell you in brief...
"Hi,
It has been an ongoing problem with my mac book. I have to use a PC to log in to my discussion forum to know about my questions. I am using a macbook (leopard 10.5.2 combo updated) and i had done a complete re-installtion of the Mac OSX as i had a kenel panic after i had created another account to check the problem with safari (as on a telephone call with apple support). Then i am not able to log into my account even on .mac account too. I had firefox but i had to do too much of "forced quit" when i had to close. Even my "SENDING ERROR REPORTS" FAILS everytime.
All this started when i had some software updates from the website. How can i get rid of this problem. Further, while using any pc on the same network, i have the same problem. Is it a hardware / Mac OS software related problem or the Network (ISP) related problem....
Plzzzzzzzzzzzzzzz Help. " -
Hi
I am unable to open the link in the secure pdf file after entering the password. It says to double click the link to view the content in it but nothing happens when I double click it . Please help.Hold the Control key and click it. It should open in a browser window... or pop up a warning about Reader trying to connect to the internet. Click OK and it should connect.
If it doesn't, the link is "broken" and there's NOTHING anyone here can do about that. ONLY the author can fix the link. -
Whenever I turn on or restart my MBP, a dialog box appears saying --> “/Library/StartupItems/if2k” has not been started because it does not have the proper security settings.
How can I fix this?
First, I searched online and found a site with a If2k_Remover_V2.zip file, but whenever I try to open the link, a page comes up saying,
Forbidden
You don't have permission to access /w/files/if2k/If2k_Remover_V2.zip on this server.
Any thoughts on this?
Also, I see the if2k folder in the Library/StartUpItems; is it something I can just drag into the Trash? Or would that be a bad move?Did you ever figure this out? I just upgraded to Lion on my Air and I have the same issue.
-
I'm having trouble opening pdf's on my Samsung Note tablet.
I'm having trouble opening pdf files on my Samsung note tablet. Before I encountered this isssue, a window would pop up with Adobe as an option everytime I downloaded a pdf files, however now I'm only given polaris office as an option to open pdf's. I've tried changing the settings but have had no success. I'd appreciate any help or advice.
Hi,
Do you have Adobe Reader installed on your device? You can check it under Settings-->Apps. If Adobe Reader is installed on your device and still the pdfs open in some other app, then you might have chosen that app to be the default app for always opening pdfs. You can clear the defaults for that application. Just go to Settings-->App--->Polaris(or any other app where the files open)--->Clear Defaults. Next time you try to open a pdf, you will be presented with the options again. Hope this helps. Please let us know if you still face some issues.
Thanks. -
We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
Hello:
I keep getting this message upon startup. Can't figure out how to address it. Here it is.
"/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
Any suggestions?There's an invisible one name "Icon" according to the error message.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one. -
I am facing with the following problem whenever i start my laptop(Macbook Air,OSX 10.9.4).
Insecure Startup Item disabled.“/Library/StartupItems/MobileBrServ” has not been started because it does not have the proper security settings.Open /Library/StartupItems/ folder and locate the file then remove it. You have installed incompatible software. If you don't believe this is correct, then determine what software installed the item and contact the developer for help.
-
My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.
there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc. -
I recently changed my aol password and right after I changed, I cannot get mail. I get a a pop up block that says, Cannot Get Mail, the user name or password for AOL is incorrect, settings, OK. I go to settings as suggested but the account area is grayed out and will not let me open. Need help on how to fix this problem. I tried sync with my PC and that did not help either.
It sounds like you might need to contact Yahoo! if you aren't able to setup your email account as a new account after deleting it.
I found some links on the Yahoo! website that might help:
http://help.yahoo.com/kb/index?page=content&id=SLN4138&locale=en_US&y=PROD_MOBIL E
http://help.yahoo.com/kb/index?locale=en_US&y=PROD_MOBILE&page=content&id=SLN261 7 -
I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
Thanks!Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac. -
I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.
Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.
-
HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.
You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.
-
i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?
This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.
-
I am not able to open iCloud from my settings, Sirs says I don't have iCloud installed what has happened? I have an email saying my device can't be backed up because my I cloud is full, and telling me to go to settings to manage it, but my iCloud button is in light grey instead of black and unresponsive.
Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes. You will then be able to access Settings>iCloud again.
Maybe you are looking for
-
Is there a way to limit Facebook use on iPhone and iPad?
I use "Stayfocused" on my Macbook, but it's a Google Chrome extension and Chrome isn't supported for mobile platforms. Likewise with "Leechblock", a Firefox extension. Good for Macbook, but apparently not supported for iPad/ iPhone. I can't find any
-
Routine in Infopackage data selection doesnt give appropriate results...
Hi Gurus, I need to pull data into PSA (BW 3.5) based on a certain selections in the Infopackage. Selection is based on specific values of Infoobject 0PLANT , however, as these values are multiple and do not fall in a specific range I have written a
-
Poor Performance on Inner Join of VBUP and VBAK
The following select is performing poorly, i.e., ST05 Execution is 1, Records is 246, but Time/Exec 94,499,272. Very poor. SELECT VBUPVBELN VBUPPOSNR VBAK~KUNNR FROM VBUP INNER JOIN VBAK ON VBUPVBELN = VBAKVBELN WHERE VBAK~
-
Hi All, I need to import R/3orBi & Oracle Table Contents(Field Names) in XI, /people/sravya.talanki2/blog/2005/12/21/convert-any-r3-structure-to-xsd-made-easy-was-60 As per the Blog, I had created the Function module, but the output is in only 2 line
-
Simple calculation problem...pls help
i have 2 report blocks in my report. the query for report block 1 is select emp_name,sal sal1 from emptable where emp_num=7167 the query for the next report block is select emp_name,sal sal2 from emptable where emp_num=7168 both the reports query the