Samsung printer fails after update to CUPS 1.7.5

On July 31 I updated my system and cups-1.7.4-1-x86_64, cups-filters-1.0.54-1-x86_64 and libcups-1.7.4-1-x86_64 got updated to cups-1.7.5-1-x86_64, cups-filters-1.0.55-1-x86_64 and libcups-1.7.5-1-x86_64, respectively. I just tried to print something, but instead of the page that should be printed, my printer, a Samsung ML-2165, printed:
INTERNAL ERROR - Incomplete Session by time out
POSITION: 0x9eee (40686)
SYSTEM: h6fw_5.53/os_hook
LINE: 1353
VERSION: SPL 5.53 07-22-2011
I'm using the Samsung ML-2160 printer driver, which worked flawlessly until recently (note that in the beginning I had problems printing more than 1 job without resetting the printer, as stated in the comments, but this issue magically went away).
I decided to set LogLevel to 'debug' and now my /var/log/cups/error_log reads:
D [04/Aug/2014:17:56:20 +0200] [Job 73] The following messages were recorded from 17:44:25 to 17:56:20
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Job restarted by user.
D [04/Aug/2014:17:56:20 +0200] [Job 73] time-at-processing=1407167771
D [04/Aug/2014:17:56:20 +0200] [Job 73] 3 filters for job:
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [04/Aug/2014:17:56:20 +0200] [Job 73] rastertosamsungspl (application/vnd.cups-postscript to printer/Samsung_ML-2160_Series, cost 0)
D [04/Aug/2014:17:56:20 +0200] [Job 73] job-sheets=none,none
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[0]="Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[1]="73"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[2]="****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[3]="****straat 4 - Google Maps"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[4]="1"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[5]="EdgeControl=Fine number-up=1 JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[6]="/var/spool/cups/d00073-001"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[7]="CUPS_STATEDIR=/run/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[8]="HOME=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[10]="SERVER_ADMIN=root@dc7800"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[11]="SOFTWARE=CUPS/1.7.5"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[13]="USER=root"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[14]="CUPS_MAX_MESSAGE=2047"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[17]="IPP_PORT=631"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[18]="CHARSET=utf-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[19]="LANG=en_US.UTF-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[20]="PPD=/etc/cups/ppd/Samsung_ML-2160_Series.ppd"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[21]="RIP_MAX_CACHE=128m"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[22]="CONTENT_TYPE=application/pdf"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[23]="DEVICE_URI=usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[24]="PRINTER_INFO=Samsung ML-2160 Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[25]="PRINTER_LOCATION="
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[26]="PRINTER=Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[27]="PRINTER_STATE_REASONS=none"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[28]="CUPS_FILETYPE=document"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[30]="AUTH_I****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftopdf (PID 4266)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftops (PID 4267)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/rastertosamsungspl (PID 4268)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started backend /usr/lib/cups/backend/usb (PID 4269)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Restarted by "root".
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops - copying to temp print file "/var/spool/cups/tmp/010ab53e725fc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading USB quirks from "/usr/share/cups/usb".
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loaded 68 quirks.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printing on printer with URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] libusb_get_device_list=11
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: +connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: -connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer found with device ID: MFG:Samsung;CMD:SPL,FWV,PIC,EXT;MDL:ML-2160 Series;CLS:PRINTER;MODE:SPL5,R0STATUS:BUSY; Device URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] Device protocol: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sending data to printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer make and model: Samsung LaserPrinter
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for pstops: pstops 73 mk '****straat 4 - Google Maps' 1 'EdgeControl=Fine JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771'
D [04/Aug/2014:17:56:20 +0200] [Job 73] Using image rendering resolution 600 dpi
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/010ab53e725fc
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter gs (PID 4275)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter pstops (PID 4276)
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4266 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Page = 595x842; 12,12 to 582,830
D [04/Aug/2014:17:56:20 +0200] [Job 73] slow_collate=0, slow_duplex=0, slow_order=0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_comments - %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%BoundingBox: 0 0 596 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%HiResBoundingBox: 0 0 596.00 842.00
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Creator: GPL Ghostscript 914 (ps2write)
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%LanguageLevel: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%CreationDate: D:20140804175611+02'00'
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Pages: 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%EndComments
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_prolog - %%BeginProlog
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_setup - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before page loop - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Copying page 1...
D [04/Aug/2014:17:56:20 +0200] [Job 73] pagew = 570.0, pagel = 817.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageLeft = 12.5, PageRight = 582.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageTop = 829.5, PageBottom = 12.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageWidth = 595.0, PageLength = 842.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1 pages...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4276 (pstops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4275 (gs) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4267 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Samsung_ML-2160_Series: spl2.c:1322: RenderGDI: Assertion `ul_comp_size < ul_band_size' failed.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sent 44411 bytes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4268 (/usr/lib/cups/filter/rastertosamsungspl) crashed on signal 6.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Hint: Try setting the LogLevel to "debug" to find out more.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Waiting for read thread to exit...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read thread still active, aborting the pending read...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Resetting printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4269 (/usr/lib/cups/backend/usb) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] End of messages
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state=3(idle)
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-message="Filter failed"
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-reasons=none
(I wiped out some confidential information)
Notice the failure of the RenderCGI assertion, likely causing the crash of rastertosamsungspl. I searched on the net, but didn't find a solution. However, I remembered that the CUPS packages were updated a few days ago and I manually downgraded to the previous releases. This solved the problem for now.
Can someone see what's changed in the last release, especially regarding communication with a printer driver?

Some older servers don't know what to do with unknown extensions. They are supposed to ignore them, but some actually close the connections with an error. By encapsulating, you are essentially stripping off any extensions because there is no such thing in the SSLv2 format. Suggest upgrading server if possible.

Similar Messages

Printer failed after update

I have a Canon PIXMA MP610 printer which worked fine on Tiger,10.4. After upgrade to Leopard 10.5.5, all I can get is immaculate white paper. The MP610 is not among the printers listed for Leopard so I tried two other models but still producing lily-whiteness. I understand that the driver in most of the PIXMA range is the GUTENPRINT v5.1.3, so that cannot be the problem.
I still have the installation disk. Should I try re-installing. Failing that what should I do? The Canon help-line seems to be closed for a few days.

Upgrade to the latest version (5.2.2) of Gutenprint from _http://gutenprint.sourceforge.net/MacOSX.php_. There is a driver for the Canon PIXMA MP610 in that version.

BB Tour Fails after Update

Like others, I get the clock on white, then black screen of death, then more clock on white. The difference is, mine won't stop. It just keeps going and going and going. From what I can tell on the BlackBerry website, I need to pay someone to help me resolve the problem (????). Am I missing something?? PLEASE HELP!

Mine failed after update too. Device will not even turn on now and if I plug it into the usb the red light comes up but still no screen. tried taking out battery and replacing but still nothing...

Mobile connection fail after updating apple 4s to ios 6.1.3

Mobile connection fail after updating apple 4s to ios 6.1.3
intertnet and other online applications are not working after updating to apple iphone 4s to ios 6.1.3
what is the solution for this......

try resetting your network settings.
Settings.app -> General -> Reset - > Reset Network Settings
CMIIW

Printer fails after recent udev and kde updates

after the very recent upgrades i made everything work again fine, all except my printer on lp0, i have another printer that still works on usb flawlessly but my other printer only works on parallel port.
cups works and registers everything I try to print on jobs lists, but the printer light never blinks or prints as normal.
cat asses.txt > /dev/lp0 makes the printer light print but it never prints
anyone else having this problem?

Sort of.
I have a Canon Pixma iP5000 printer (USB), and after the last update it's still seen fine by the commercial CUPS backend (Turboprint) on /dev/usb/lp0 as ready and waiting jobs, but whenever I send it something to print it magically goes offline!
The only way to print something after the upgrade is stopping the printer first, sending the print output and then starting the printer- THIS way it prints just fine!
It looks to me like a major CUPS bug.

Printing problems after updat maverick

After update to maverick mine hp deskjet 3070a ,cannot print wirelessprinting anymore.the AirPrint is not in the list and, bonjour printing is not in the list *** Well Before i update the printer was working allright with wireless connection. No problem what so ever. I can only choose USB printing. Can you please give me Some advice.

I have the same idential issue with a HP Laser Jet Printer P1100/P1102w... If you tick the netwrok printer sharing box on the USB connection the Bonjoour printers show up then almost immediateky dissapear? Only on a few occasions do they remain stable enough to click on and add, however it fails to support AirPrint and will not print over WiFi... it does not pick AirPrint as the driver on AutoSelect and even if I select the printer driver manually it still will not print over WiFi... USB is fine however. I have reset the printing system, I have done a WiFi card reset, I have done all the troubleshooting I can do but still there is an issue? Is there anything else I can do?
I will be getting HP support to remotely shoaddow my Mac in an attempt to get a successful installation however I suspect the issue will persist? All the Apple Updates are done and also the current drivers are installed. I suspect this is an Apple Bug that needs to be fixed asap? It is a brand new HP printer that is supposed to support AirPrint...Very frustrating Apple?

Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9

Hi,
I have printing problems with my Officejet Pro K5400 after update to Mavericks OSX 10.9.
Now after printing 1 page the printer prints an extra page with '2345X' sentence on it. As this problem started right after updating, I suppose there is a problem with an update.

This patch did solve our problem with the K5400 feeding a "blank sheet".
Thank you.

Printing problems after update to 10.2.1.

After updating to 10.2.1 in XP, when I try to print my Reproduction Files in White Mosaic format, the list of songs prints correctly but the CD insert prints a black square while before it printed the covers, pictures or images I had added to each song. Any help? Thanks

Had the same problem, in Windows Seven, Itunes 10.2.2.12. I did not find a fix for it, but I did find a work-around. I printed the jewel case insert to a pdf file (using cutepdf writer - available at cutepdf.com), then printed the pdf (on the same printer that wouldn't print correctly from Itunes) and it worked fine.

Color (onscreen/print) issues after update to 10.4.9

I am on the hunt for any new information - I haven't found it yet. I am convinced that one printer profile has gone haywire after the OSX 10.4.9 update. I can no longer use it accurately to onscreen proof nor application manage print in Aperture. The other printer profiles seem to be working. Using PSE4 I get the same preview and print results - major yellow/orange colorcast. My other two printers are working ok.
I understand proofing may/will present a shift in lightness, contrast, etc. and you can create an Aperture version to make adjustments for that profile. But I am experiencing a major shift that is difficult to adjust in the overall image.
Has anyone experienced "all of a sudden" icc profile / onscreen proofing / printer issues after the update (FYI ColorSync was updated in that)? I have tried just about everything except un/reinstalling Aperture.

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

[SOLVED] Network Manager systemd unit fails after update

EDIT: Reinstalling libnm-glib resolved this issue
After updating to the latest version of NetworkManager (networkmanager-0.9.8.10-3), the systemd unit fails to start. It works fine after downgrading back to the previous version though (networkmanager-0.9.8.10-1). I'm not sure if this is a bug or an error on my end; since the previous package works I've just dowgraded for the time being. For the update that doesn't work, here is the output of "systemctl status" and the systemd journal:
>>sudo systemctl daemon-reload
>> sudo systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since Wed 2014-06-11 15:28:25 EDT; 10s ago
Process: 24073 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 24073 (code=exited, status=127)
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
>> journalctl -xn
-- Logs begin at Tue 2014-06-10 12:47:19 EDT, end at Wed 2014-06-11 15:28:36 EDT. --
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:25 kyle systemd[1]: Starting Network Manager...
-- Subject: Unit NetworkManager.service has begun with start-up
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has begun starting up.
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
-- Subject: Unit NetworkManager.service has failed
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has failed.
-- The result is failed.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session closed for user root
Jun 11 15:28:28 kyle dbus[489]: [system] Failed to activate service 'org.freedesktop.nm_dispatcher': timed out
Jun 11 15:28:36 kyle sudo[24075]: kyle : TTY=pts/2 ; PWD=/var/cache/pacman/pkg ; USER=root ; COMMAND=/usr/bin/systemctl status NetworkManager
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session closed for user root
Last edited by T0k3n (2014-07-03 15:18:01)

Check the changes:
https://projects.archlinux.org/svntogit … e192881dc5
https://projects.archlinux.org/svntogit … ee906b6c44
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.

Build failed after updating to CTP 3.1

Hi,
After updating to CTP 3.1, I created a blank cordova project and tried to build it.It shows build failed.I can see a warning - The typescript file was given no files for compilation .However this shouldn't stop the build ?
Please advise.

Set your build verbosity to diagnostic (Tools>Options>Projects and Solutions>Build and Run>Set MSBuild project build output verbosity= Diagnostic) and rebuild your project. The added details should reveal why the build is failing.
-Ellen

Aperture fail after updating to snow leopard

after updating to snow leopard, aperture 3 is not working - i have downloaded aperture update 3.1.1, but now it is saying i must have aperture 3 when i try to run it - which i already have???, any help greatly appreciated, thanks.

Doh! - It had "original" in the filename. Renamed it and run the update successfully... All working well, thanks for your patience... Still getting used to Macs.
Thanks again.

Canon MF4370 network printing fails after 10.6 upgrade

Have been using a Canon MF4370dn printer for the past year with a desktop PC, notebook PC and two MacBook Pro. Printer was connected via Ethernet cable to our AT&T wireless router. MacBook Pro running 10.5.x was able to print via AirPort WiFi just fine. After upgrading to 10.6 and replacing the router with an Airport Express I discovered both MacBooks are no longer able to print via the network. I have tried several solutions posted on this board for various Canon UFRII printer problems, but nothing is working.
Here are some relevant setup and diagnostic details:
* Mac OS X 10.6.5
* Firewall is turned off
* Canon UFR II v2.20 driver (followed prior version uninstall procedure from manual multiple times)
* Added printer first via Bonjour, then via IP address and LPD
* Able to access printer management interface via web browser
* Able to print from desktop PC via Ethernet cable and from laptop PC via WiFi
* Able to print from MacBook Pro connected via USB. UFRII print monitor gives error "Cannot monitor this printer with the current connection."
* Unable to print from two MacBook Pros connected either via Ethernet cable or Airport WiFi. Print command returns 10322 error "Cannot communicate with the printer" and UFRII print monitor gives error "Printer not responding."
I would appreciate any additional ideas!
Thanks in advance.

Hello and welcome to Apple Discussions.
First of all I would like to complement you on the work you have done so far. Under most situations I would have expected you to resolve your issue with all that you have done.
The clue for getting this to work is the UFR2 Printmonitor. Once it can communicate with the MF then the driver will function.
From your information I believe that the UFR2 Printmonitor could be still looking for the previous setup when the MF was connected via the AT&T router. When you manually delete the UFR2 driver including "UFR2.BG.plist" this does not work correctly when the service is still running. You will see the 'UFR II Backgrounder' service via Activity Monitor.
So I suggest that you open the UFRII Printmonitor and then click on the Printer menu. You may see the MF4370dn with a USB icon next to it from the previous USB connection. And it should also show the MF4370dn with a network icon next to it. What you want to do is update this network 'link' to the current network connection and that can be done by pressing 'Search for Printer'. Nothing will be visible on the display when this completes so leave it a couple of seconds and then open the UFRII Printmonitor > Printer menu again. If you now select the MF4370dn entry shown with a network icon this should now show a connection to the printer rather than a not responding error. If this does work then you can exit Printmonitor and try printing.
If it still fails to print then delete the MF printer queue and manually remove the UFR2 driver files again, this time adding the extra step of Force Quitting the UFRII Backgrounder service via Activity Monitor. Then restart the Mac and run the v2.20 UFR2 installer again and then add the printer via LPD.
See how that goes and reply if needed.

[SOLVED] HP jetdirect printer errors after updating net-snmp

My office's HP printers weren't working anymore this morning, my cups log showed the following errors after a pacman -Syu.
It looks that libnetsnmp.so.25 is required by hplip 3.11.10-1, but the latest net-snmp 5.7.1-1 provides libnetsnmp.so.30.
168 D [31/Oct/2011:14:15:51 +0000] [Job 708] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="hp color LaserJet 3500" -dDuplex= false -r600 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7 -dIjsUseOutputFD -s OutputFile=- -
169 D [31/Oct/2011:14:15:51 +0000] [Job 708] JCL: <job data>
170 D [31/Oct/2011:14:15:51 +0000] [Job 708]
171 D [31/Oct/2011:14:15:51 +0000] [Job 708] Starting process 3788: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer =hpijs -dDEVICEWIDTHPOINTS=6..."
172 D [31/Oct/2011:14:15:51 +0000] [Job 708] hpijs: error while loading shared libraries: libnetsnmp.so.25: cannot open shared object file: N o such file or directory
[14:29]:sudo pacman -Q | grep net-snmp
net-snmp 5.6.1-4
[14:30]:sudo pacman -Qo /usr/lib/cups/backend/hp
/usr/lib/cups/backend/hp is owned by hplip 3.11.5-1
solution is to downgrade net-snmp:
[2011-10-08 21:56] upgraded net-snmp (5.6.1-4 -> 5.7.1-1)
[2011-10-31 14:24] Running 'pacman -U /var/cache/pacman/pkg/net-snmp-5.6.1-4-x86_64.pkg.tar.xz'
[2011-10-31 14:24] upgraded net-snmp (5.7.1-1 -> 5.6.1-4)
this might help someone else,

Hi groberts619,
Unfortunately the software you obtain from the Printer Software Update doesn't include the HP Scan application - only the print and scan drivers. I just checked on your product and it doesn't appear that there are plans to release an updated HP Scan installer for this model.
On Mavericks it seems your best option will be to use Apple's Image Capture scan application. You can find this application in the /Applications folder. You also have the option to scan using Preview. Look in the File menu for the command to import from a scanner.
FretnBoutNutn
I work for HP.
- Say "Thanks" by clicking the Kudos Star in the post that helped you.
- Please mark the post that solves your problem as "Accepted Solution"

Cloud print disappears after update

After the update to my Samsung Galaxy Note 3 Google Cloud Print no longer works. Icon is gone. Not listed in the Google folder in all apps. Not appearing in share menu. But it is listed in all apps in the settings area and listed as active in settings/print.
Also Handcent popup allows quick response to incoming texts, but whatever is typed doesn't get sent or even registered in the conversation list.
Both issues need to be fixed.

Hi,
Cloud Print was working perfectly until the latest update of the phone.
I uninstalled - re-installed - rebooted and the problem remains.
Cloud Print's icon is nowhere to be found.
Cloud Print no longer shows up in the Share menu.
BUT - Cloud Print shows in Settings/all applications
AND - Cloud Print shows Settings/Other/Print as being active
ALSO - only one application shows that it is still in the system: OfficeSuitePro. There is a way to access Cloud Print in its print menu, but it's rather complex.
Summary: A well-known app, and by Google, of all things, gets installed on Android but it cannot be used because it is essentially invisible. When did this happen? Right after the phone's operating system update.
Please advise,
Michael

Samsung printer fails after update to CUPS 1.7.5

Similar Messages

Maybe you are looking for