Samsung RAW   Last Update = issue?

I just ran the update on my mac(it updated camera raw and other stuff), but since the reboot I am unable to see my .SRW files(Samsung RAW from a Samsung NX100)  anymore in aperture, when I click on those who are there, it's visible for a second, then goes black with "Unsupported Image Format" on it.
EXIF data are fine, except for "Pixel Size" showing a very different value then "Master pixel size", even on newly imported files(900x600 vs 4592x3056).
Preview and thumbnails in finder don't work either.
If I switch to JPEG it shows.
My Canon's RAW files are fine.
Any hint how to solve this?

I don't see the Samsung NX100 as supported on the Apple RAW support page.

Similar Messages

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem.
    In import window images are not diplayed as images but all the same blue mini images.
    vertical files are changed into landscape positions and more. Mac version.
    cj de vries

    Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
    Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
    created by Yammer in Bridge General Discussion - View the full discussion
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    THNX Problem solved

  • HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    Since my last update  to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    update 10.8.5 solved this problem. Thankyou anyway.

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

  • Dimension Current Flag and Last Update date not updated - SLD issue!

    Hi.
    ODI is running pretty well now. I have created several interfaces from flats, multi database tables, but still have to test the services and cdc, etc... later I will do this.
    I am having a small issue here when dealing with Slowly Changing Dimensions. I am trying to populate a product dimension. I use a Load KM and the SLD KM. Then I update a product row in the source, and I wish to make sure that type-II runs OK for major and minor changes after running the interface.
    Well minor changes run ok, deletes don't run at all, and update for major changes should generate another surrogate key and turn the old record "current flag" to zero and "close"/update the last update date as well!!!
    What am I missing here? Is this related to the KM restrictions?
    "Restrictions:
    - Make sure to map ALL target table columns flagged as: "Surrogate Key", "Natural Key", "Current Record Flag", "Start Timestamp" and "End Timestamp". Notice that mappings set for the "Current Record Flag", "Start Timestamp" and "End Timestamp" columns are not used."
    Do I need to implement somehow that behaviour or use another KM?
    Another question regarding data warehousing: Well usually in a bespoke DW we can have N sources, N staging areas, and several data marts. Using ODI, for instance what are the best practises to create or simulate this behaviour??
    I know that using a Knowledge Module I can load/extract (to temp tables in the source work schema), then integrate in the target schema.. using the same schema to temp staging tables or another schema.... what is the best aproach?
    Any dw people wants to share some experiences here?
    Thank you all.
    Best regards,
    Alvaro
    Message was edited by:
    Alvaro Silva

    Thanks Cezar :)
    Well Updates work if I unckeck 262!!! :) But deletes are not setting the CURR to zero!!!
    PS: um abraço para ti também .... o mundo é pequeno! :) será que podes adicionar-me no messenger para alguma troca de experiências? [email protected]
    Alvaro
    Message was edited by:
    Guest

  • Iphoto began running slow right after the last update. I'm working with raw files. when I have an open moving from photo to photo some times it slows way down, Never did prior to last update. Thanks

    iphoto is running slow at times. This never happened until I installed the the last update. The program gets slow when I have an event open moving with the arrows back and forth.  It doesn't make a difference in full screen or smaller

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import a number of raw image files and test to see if the same problem persists.
    OT

  • Odd, but minor, issue after last update

    Hi all,
    A couple days ago, I finally updated OSX from 10.4.7 to 10.4.8, and I think in the Software Update routine there was an Airport update, and several other updates for Logic Pro, iMovie, etc., etc. All were minor updates.
    However, now I have an odd issue. Every time I boot up my Intel iMac, I get a message saying that none of my trusted wireless networks are available, and it asks me if I want to connect to Apple network "xxxxxx" -- of course, the "xxxxxx" that the message refers to is my normal Airport network, so I click yes.
    And that's the end of the issue until the next day, when I boot up the iMac again, and again I get the message. It doesn't seem to effect the actual performance throughout the day.
    This minor issue began immediately after the last update, and only effects my Intel iMac. My G4 iMac, which was updated at the same time, to the same software specs, is unaffected.
    Is this a bug, or is there something I can do to resolve the issue?
    Thanks!
    Kevin

    I heve the same problem. Two laptops and a desktop that used to connect automatically to my WPA protected AEBS. Since 10.4.8 none of them auto connect anymore. They never drop the connection during regular use, nor waking from sleep. But on shut down or restart it will not auto connect.

  • Issues after the last update Lumia 920, can't see ...

    Hi.
    I have this issue after the update.  I do not know what's wrong but I can not see my recent calls. Neither can see my sms is sent or the ones I have taken back.
    I have tried to call one of my friends. I can hear them but they can not hear me. I have also checked with my operator and they do not have the disruption will harm the network.
    So what's really wrong? This happened after the last update I did. Living in Sweden, Gävle uses Tele2 comviq simcard.

    When did you update? Have you tried simply rebooting your phone by pressing and holding both Vol down + power buttons for around 10 seconds until the phone vibrates? If that doesn't work, you could try resetting your phone but make sure you backup your data beforehand. 

  • HT6001 my mac has started freezing and suddenly shutting down on me it seems as if every process has slowed down since downloading this last update of 11.1.4, any solutions? Because it shut down in the middle of a test twice now, saying keyboard issue.

    my mac has started freezing and suddenly shutting down on me it seems as if every process has slowed down since downloading this last update of 11.1.4, any solutions? Because it shut down in the middle of a test twice now, saying keyboard issue.

    What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

  • InDesign CC fails during update - issue has lasted approx 6 weeks - have deleted app, no change. Need fix.

    InDesign CC fails during update - issue has lasted approx 6 weeks - have deleted app, no change.
    The update process for InDesign is broken.
    Need this fixed.

    It's the same issue that - apparently - has existed for YEARS.
    The installer can't find a file it thinks should be named a certain way and stops trying. Even though Adobe is the part responsible for naming files.
    The programmers haven't included any sort of troubleshooting scenarios in their updater. And they haven't kept up with all the ways they name files in various versions.
    It's this error from the log file:
    ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe Media Encoder CC/Adobe Media Encoder CC.app/MediaIO/codecs/MCMPEG4VideoCodec.framework/MCMPEG4VideoCodec"(Seq 11)
    I've done all the troubleshooting of this Adobe programming issue I'm going to do.
    Adobe knows about this issue and needs to update the software manager.
    I'm extremely unhappy that I'm paying $600 a year for Adobe to write crap software and expect ME to troubleshoot their junk.
    I don't NEED Adobe software. I'm on the verge of canceling my subscription.
    This is completely unacceptable.

  • Blackberry 10 OS issues since last update 10.3.1.1565

    Ls, I have some problems with our Blackberry’s I have this since the last update of blackberry I have following issue’s:
    - Phones will not start while there are 100% and finalizing
    - Photos are lost
    - Contacts are lost
    - WIFI profiles are lost
    What can we do about this issues?

    Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Digital Camera Raw Compatibility update installation issues.

    I have attempted to install the Digital Camera Raw Compatibility update 6.01 but I am being asked over and over to restart my Mac Pro. The app store shows that I still need to install the update. 

    I was surprised to see it listed.
    I don't have a shiny new Leica  .  Will have to make do with my shiny new RX1R  .
    (Added:)
    I don't follow Medium-Format equipment, but a quick check tells me the Pentax 645D came out in 2010.
    Message was edited by: Kirby Krieger

  • DNS Server issues on Airport Extreme since last update

    Since the last update to my Airport Extreme, my windows 7PC's show connected to internet but do not connect due to DNS server. Windows 8 computer works fine as does Mac. Mac is the only wireless computer I have mentioned. The wireless router is segregated so it should have no effect on anything on my network but it somehow does..... can anyone explain?

    Thanks for your reply.
    I tried everything I found in the web, but nothing worked. I even cleared the HDD and reinstalled the OS (and resetted SMC and PRAM), but now there doesn't seem to be an AirPort - as if it never had exist.
    Until that I have been very happy with the decision to switch to Mac instead of using a Windows PC, but that casts a cloud on it (in the last 10 years none of my windows PC's ever had a hardware defect).
    Fortunately the MacBook is half an year old, so I will bring it back to the seller hoping the best.

  • Tab 7.0 Update Issues / Findings

    * Update Notice received/Performed 11/3 @ 9:30pm
    - Had two browser windows active, something already in 'Copy' memory, went to Copy again and it closed all the browser windows
    - Scrolling is smoother but alittle more touchy.   If a web page has an embede video in it, the video window lags way behind the scrolling until you release your finger, making it difficult to postion the page because the video window is blocking your view.
    Additionally, similar delays occur on other sites that have layered graphics.  You can see a good example of this problem on this site  www.govoutreach.com
    Another bad example I just ran into is scrolling an applications settings menu, All te characters hung & strechted when trying to scroll up or down.  Took the screen about 5 seconds to clear up.  App is called Marine Weather, and the problem occurs when modifying layer options of the mapping.  I've notified the developer to double check w/them as well.  I also checked the problem against Google's Layers, but nothing occured there.
    - After update, Charging via usb, Battery indicator in upper-right showed a negitive sign.  Also...  Info/Status details describe current as 'Decharging'  What is occuring?
    - Sometimes the Task Manager lags abit when starting up
    - Screen Off... When plugging in the charger, the screen would come back on, but then, go back off if you didn't enter your password (about 5 seconds or so).  But after the update, the screen stays on, and now requires you to press th power button to make it sleep.  On the same note, when the battery fully charges, the screen comes on (due to notification), but doesn't return to its off state.
    - Typing Text...  When typing/using the (period,comma,question) button, each depression leaves an odd looking character until you press the space bar, which the reveals the true character selected.  Additionally, if you touch the button, say for a period, wait a few seconds, then the odd character would go away, then the peroid would appear.  The odd looking character appears like a period with a small dash under it.  This issue makes it difficult when tapping to select, as your not able to see the true character until you spacebar away, or wait a few seconds before continuing to type.
    - I'm experiencing more browser/application aborts as days pass.
    - The browser does'nt respond as smooth as before the update.  Slight jerkyness, Longer pauses before another actin occurs such as opening another browser window from clicking on a link.
    - The New Highlighter/Text Selector w/the pop-up options is erratic, and won't let you select text accurately.  It wants to jump to the left margine of a given paragraph, and trying to drag it back won't work sometimes, it still wants to snap back to the left.
    - I'm getting the feeling my battery is draining alittle sooner?  Does this have anything todo with the Decharging I noticed occuring after the update?
    - First wakeup in the morning (from sleep state), seems to take longer for screen to become active, and to turn landscape mode
    - Unless I'm missing a setting on my side, I've also noticed I ha n't been getting notifications  for applications I have installed.  I have to go into the Android Market, then view 'My Apps' to see if there are any updates.
    - Built-in Calendar... Making changes to the settings, Time, you cannot modify the time zone without select Locking the time zone first, backing out of settings, going back in, only then will the time zone list be available to edit. / Also, option to add/delete email accounts is missing.
    - Settings > Accounts & Sync, Ability to turn individual accounts is missing
    - Week-plus of use since update.  Getting less battery time over 8 hour period than before.
    - Using Google Mapping, taking much longer than before to map out area, espeicially with Traffic activated.
    ---END  11/14/2011
    If I can be of any further assistance or Beta testing, please contact me via my email on account.

    If I can add another problem to the list: after the last update, my Tab is no longer able to access WiFi via my Samsung laptop running Windows 7 (I was able to, and did daily, before the update). Nothing has been touched on the laptop. Before, I had been so relieved to be able to tether onto my WiFi at home through my laptop because without it, my Tab will not connect to my Belkin wireless router, no matter what channel, what encryption method (or no encryption) used - **bleep** ANNOYING!  Now, neither will work.  I thought updates were supposed to fix things (like not being able to connect to Belkin routers), not make them worse! 
    Please don't respond saying something is not set up right on my end. The Belkin issue is well documented on blogs throughout the internet, and it has never been resolved.  The only thing that changed for me was the firmware on the Tab - no other settings were touched, although after not being able to connect, I did try numerous variations to try to get it to connect again.  Has Verizon/Samsung just given up on on the 7" (Belkin issue not being resolved, no Gingerbread...)?  I haven't seen any EOL notice for it, so this flakey WiFi issue needs to be resolved.
    Device: Samsung Galaxy Tab, 7", SCH-I800, firmware version 2.3.5

  • Blue Screen of Death After RAW Compatibility Update

    My friend updated her 13" Black MacBook yesterday, specifically the "Digital Camera Raw Compatibility Update 2.3". After a reboot, she got the Apple "Blue Screen of Death", with no login window showing. Looking at system.log, there's a section that looks to be the culprit (this began after restarting due to the install of the update):
    Nov 7 13:55:29 Philbert /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]: Login Window Application Started
    Nov 7 13:55:30 Philbert /usr/sbin/ocspd[53]: starting
    Nov 7 13:55:35 Philbert kernel[0]: display: Not usable
    Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer[50]): Exited abnormally: Hangup
    Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 6 seconds
    Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer[64]): Exited abnormally: Hangup
    Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
    Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer[67]): Exited abnormally: Hangup
    Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
    Nov 7 13:56:02 Philbert com.apple.launchd[1] (com.apple.WindowServer[70]): Exited abnormally: Hangup
    Here are some things I've observed/tried, many from sources via the Internet:
    - I'm able to login in single-user mode
    - I'm not able to login in Safe Mode (hangs on white screen with Apple logo)
    - I've tried booting off the 10.5 install DVD and running Disk Utility - verify/repair disk, this comes back ok. However, if I try to verify/repair permissions, it runs for about 10 - 20 mins then freezes. I let the frozen process run overnight (10-12 hours) and no feedback. I can move the mouse, but I cannot select anything.
    - When the laptop is booted and on the blue screen, I can connect to it via AFP
    - I've tried manually changing the permissions of "/", by doing - chmod 775 /; chmod 1775 /;
    - I've tried removing the com.apple.WindowServer.plist and com.apple.loginscreen.plist files in case they were corrupted by the update
    - I tried running the "installer" command to re-install the update package from the command line. I run it with the "verbose" flags, I get no output and the process hangs.
    Since I can connect via AFP I figure I'll be backing the data up and re-installing OS X. Pretty lame though, considering this failure was caused by running a Software Update. Anyone have a last minute suggestion for me before I go down that path?
    I have the full system.log if anyone is curious!
    Cheers!

    i don't think this is a router issue...i believe it's a hardware issue...this error occured when computer is not getting sufficient memory, drivers are not installed correctly or due to invalid driver installation of any devices installed on the computer...to just isolate the problem try connecting computer directly to the modem and check are you are getting a same error message or not and let me know.

Maybe you are looking for