Samsung S5 camera images have vertical bars/gradient in them. Has anyone seen this before?

Low light conditions produce vertical bars in the image, see attached.
I downloaded another camera app and it too produces these bars.
It would seem that there is a hardware issue with the sensor.
In outdoor images these are not noticeable but I believe they are still there since as the light increases they get lighter. At some point the gradient simply blends together when there is enough light.
This is my second phone in less than 10 days, it seems getting a fully functional S5 is difficult.

    Hello pf1234,
Having a camera on your smartphone that doesn't work is understandably frustrating but we will work to get this issue resolved for you. Are you having the same issue with the front facing camera? Let's try to reset the camera app to see if it resolves the issue http://vz.to/XMEq5K Please let us know how it turns out.
CandiceH_VZW
Follow us on Twitter at @VZWSupport

Similar Messages

  • TS3276 "message failed because you have exceeded your sending limit."  Has anyone seen this before & what does it mean?

    What does this mean?  Has anyone seen before?

    Most e-mail servers impose limits on how many messages you can send per day and how many different e-mail addresses you can send messages to per day. This is a measure to prevent spam, and you're unlikely to hit those limits unless you're sending messages to a very large group of people. Generally, those limits are somewhere in the hundreds.
    If you haven't been sending that much e-mail, or to that many recipients, then your e-mail account may have been hacked and used to send spam. See:
    Someone is sending messages from my e-mail address!

  • My iPad will not connect to a computer with the cable which  means no updates or down loads. I have tried new cables and different computers. Has anyone seen this before?

    Has anyone seen this issue before?

    Possibly. Do you have other devices and will they connect?
    One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
    I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it.

  • I have an issue where the calendar server on my 10.8.4 machine all of a sudden got hung.  I get a message that says "Operation:  CalDavAccountRefreshQueueableOperation".  It is currently stuck in a "STARTING" status.  Has anyone seen this before?

    I have tried repairing permissions.  I have tried stopping the service both from the Server app and terminal.  I have searched and searched online and can't figure this out.  Any assistance is greatly appreciated!

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • Has anyone seen this Dyld Error Message:   Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow   Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto   Reason: image not found

    Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found

    Yes, some perople have seen this. Options:
    1. Try reinstall iPhoto. (see below)
    2. If you have access to another Mac with the same version of the OS, try and copy that framework over
    3. Reinstall the OS.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.
    Regards
    TD

  • Images Jump Around in Book Module - Has anyone seen this happen?

    I have about 45 tiff files in a book collection saved in the Book module.  Once I added the last few pages, images on one page swapped with images on another page.  In addition, an extra page (images on each side, really two pages)  with the same photos would appear causing me to have duplicate pages.

    I'm having the same problem, and sometimes it jumps to my entire lightroom casche and I have odd images within my book.  I have to go back to "Library" and get my quick collection.  The other thing I notice is that the text adjustment icon doesn't work most of the time, and then when it does work, the program freezes and I need to call on my task manager to close the program.  The padding controls won't stay where I've set them.  If I unlink to move text down only, it stops working, and sometimes it will also freeze.
    Another thing related to "Book" is I can't go back to get another image and add it to my collection once I have saved my book.  It only remembers the images I used at the time I saved, so I have to start all over.
    I know this is a Beta, but hopefully these things will be fixed.  I think it consumes a tremendous amount of RAM, so response is extremely slow, and I have a LOT of RAM.

  • All firefox components have disappeared. Has anyone seen this issue or have a solution?

    Since last few days, my firefox browser does not display any components like address bar, buttons, even the area where the webpage is displayed. I think there was a firefox update that took place before this happened but I am not sure.
    What have I tried so far :
    1) uninstalled and installed firefox : got the latest firefox stub installer and installed. The issue is still there.
    2) Tried to get the installer : tried to get the installer (not the stub that fetches file online during installation). Maybe I got an older one Firefox Setup 3.6.8.exe. this was working fine. I made it update itself using help menu. It updated a few time and was fine. But the last time it updated, it again started showing me the blank window.
    What do I run : Windows 7, 32 bit, 4gb ram. i3 processor
    Screenshot : trying to attach it.
    Till then the description of what I see : the windows frame that is translucent is present and the area where the page is displayed is black. No buttons or address bar or anything. close, min, max button is present. if I hit ctrl b, the bookmark area is taken up by the translucent windows frame but nothing is displayed.

    hello, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23763 (for win7 32 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Has anyone seen this bug with embedded images?

    If I embed a wide image in this post and you click on it to zoom it up, is it centered in the safari window or center WRT the monitor?  Basically can you see all of it?

    It looks like this, here. It's done that for a long time, unless Safari extensions are switched off, regardless of there being any installed.

  • I have no volume anyone seen this before

    Have no volume at all  help?

    Hello Strangers1,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Learn more about troubleshooting iPhone hardware issues.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT5163 i have an iphone4 with no visible sim card slot. has anyone seen this?

    Ui

    Yep. That would be a CDMA phone. It can only be used on the carrier it was originally sold for. CDMA iPhones don't use SIM cards.

  • HT4528 The icons on my iphone have all changed to large and I cannot change it back to normal view. Has anyone seen this happen?

    My phone's display has changed as if it were stretched like we can do with photo's except it affects the whole phone. It won't go back to a  normal display even after shutting it off and restarting. Has anyone seen this and  how did you resolve?

    Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
    Thank you,
    Deb

  • I have an issue with Iphoto, it has told me to reinstall it has anyone done this? Can you help?

    Hello
    I have an erro message come up when I try to start up iphoto, it suggests I reinstall it. Has anyone done this before?
    I originally down loaded iphoto by disc 3 or 4 years ago, i do not have the disk anymore.
    Can i uninstall iphoto and then buy it from the app store and will it keep my photos or will i have to reinstall them as well?
    Many thanks someone!
    Rosie

    Yes you can purchase iPhoto 11 on the App Store. It will update your Library. But, as always, make a back up first.
    Regards
    TD

  • My iPhone 4 camera images have blue lines on them. Anyone else?

    My iPhone 4 camera images have blue lines on them. Anyone else have this?

    My iPhone 4 camera images have blue lines on them. Anyone else have this?

  • Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

    has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image.  What's going on?  I've noticed this has happened in the past randomly with other clips and it's driving me cray cray!  Any help appreciated greatly and thanks in advance for taking the time

    In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
    Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
    MtD

  • Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.

    Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.

    Some people have seen their aluminum uni-body discoloring due to body oils.  Go figure.
    Normally putting anything over the keys/aluminum will hurt heat disspation, but you may need to use keyboard covers.
    Or save up $500/year for new keyboards.
    Neither is supposed to be a sarcastic answer.  Either one could end up being the solution.
    Good luck with it.

Maybe you are looking for

  • Error in BDC using 'N' mode while creating production order

    Hi, I am trying to create a production order  ( transaction CO01 ) by using a BDC. I just have to fill the header details, components , assign the component to operation , save and exit. When I am running the BDC in 'A' or 'E' mode, it works fine. Th

  • How to insert quotes in a table

    How do I insert !((bal==0 && code=='1') || (bal==0 && code=='4')) into a table? I tried with chr(39) and backspace char. But I am getting errors

  • DMS File Upload of Any Extension and DMS File View

    Hi, I want to upload files in DMS and I have written FM for that. It's working fine with txt files but if I upload image file or pdf files then at the time of view only text files shows. In case of PDF File is corrupt message comes and In case of Ima

  • Dimesional Restrictions in DM Package

    I have a DM Package that calls script logic. Currenty I use a requestor to select dimensional members. I want to hard code one of my dimensions but I do not want to do it in the script logic. Is there a was to combine prompted and hard coded dimensio

  • Collecting or time based inbound idoc posting

    Dear All,   We have need of posting idoc's in a specific time interval in SAP ECC system. Please help us.   requirement is We are pushing idocs to ECC , but the idoc should get process only between 3 Pm to 6 PM. Kindly help us. Regards Pradeep P N