Samsung S5- Screen Going White when I Click on Pics

In Facebook app, I attach photos, then click on the photo to tag and it appears for a second and then the screen goes white-gray and then goes back to the status (the post), or, it doesn't even allow me to pull up the photo goes straight to the white-grayish screen, pauses, and back to the post, sometimes just deleting the post completely. This was working prior to today just fine.  I have uninstalled and re-installed FB, and restarted the phone. I need this for work so I am in a bind, any help is appreciated!

Yup you can do that JennAG  pulling the battery then holding in on the Power button while the battery is out is a Form of resetting a Device many of the older Androids that had batteries that you could pull out,  you could then power cycle the phone)  But when the Sealed back style of phone came out power cycling methods had to change a bit on some Devices you hold the Lower Volume and the power button some you hold the upper Volume and the Power and on some you can just hold the Power button it self allot different ways..
But on your s5 puling the Battery leaving it out for 10 min & holding in on the power button for 20 sec. you'll be Fine b

Similar Messages

  • When i view my itunes store, it comes up then screen goes white., when i view my itunes store, it comes up then screen goes white.

    i cant seem to go on my itunes store without it dissaperaing or making a purchase because the screen always goes white. ahhh what to do?

    I was struggling with this since my latest Itunes update.  Fiirst it would not recognize my IPad as a device, after correcting that, it would list the Ipad in my device but my Sync had no options (summry, info, etc). and it kept saying it was "Accessing Itunes store".  reading your question I suddently tried deleting the itunes task (alt-ctrl, delete, processes) and delete Itunes.  (By the way, I had rebooted my computer several times over the last few days).  I opened up Itunes, and voila. Device is there. No "accessing windows" and my sync has the normal options.
    ****..feels good to actually write an answer rather than writing a questions.
    Eman

  • When left screen goes white when click on any tab

    If i leave any tab for a while then click on it all firefox 4 goes white

    If i leave any tab for a while then click on it all firefox 4 goes white

  • Iphone 3gs screen goes blank when it rings/gets a text

    My iphone screen goes white when i get an incomming call. I can answer it if i slde my finger across the general area where the answer switch will be.
    In order to view the screen after the iphone has locked I have to hit the home button followed by the power button 3 times.
    Does anyone know if this can be fixed? If not will i be able to get a replacement. I'd be willing to pay as its out of warranty?
    Thanks in advance for any help you can give me!

    Remove your case and see how it works. It may be blocking the proximity sensors that turn the screen off/on during a call.
    Message was edited by: paulcb

  • While watching streaming video content, Youtube for example, and I click on the fullscreen button, the screen goes white.

    The video plays fine but when I try to watch full screen, the whole screen goes white. The right-click menu comes up and I am able to chose one of the options but the corresponding window does not appear the screen remains white. If I click on the screen the video stops and starts (I can tell by the sound). The escape keys returns the video to the normal size within the browser page and the window for the option I chose from the right-click drop down menu appears over the video.

    Flash and other of your plug-ins look a bit dated, please review [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins#w_updating-or-re-installing-your-plugins Updating or re-installing your plugins], perform a plug-in check and update as needed.
    See if the problem still occurs with the latest Flash version.

  • I have firefox 4 installed. when i go to one web page everything is fine; but, when i try and go to another my screen goes white and i have to restart my computer to be able to go to anyh other web page

    when i go to a website and try and go to another the screen goes white and nothing ever happens. i have firefox 4 installed

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • Firefox freezes, if clicked the screen goes white and says firefox is not responding. How do I fix this?

    At seemingly random times, firefox freezes, and if clicked the screen goes white and says not responding. At times it makes watching any video impossible. I have tried everything I've seen in help forums. I've removed and reinstalled firefox, adobe, silverlight, realplayer, and anything else forums have suggested. So far the only effective solution I've read about this problem is to switch to google chrome. I'd rather not do this.

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    Starting The Computer In Safe Mode;
    If running, turn your computer off.
    Remove any disks and thumb drives that are in your hard drives or ports.
    Now start your computer but also;
    '''Windows; '''Press the <F8> key repeatedly.
    '''Mac: '''Hold down the Shift key.
    '''Linux; '''Using the command line, Linux/Unix computers can be booted
    into various run levels that determine which resources are loaded.
    For example, "runlevel 1" is typically the equivalent to Windows and
    Mac safe modes.
    * Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
    When the '''Boot''' menu is displayed, release the key you were pressing.
    You must now choose what mode you want. The most used are;
    * Safe Mode; The computer runs with only a minimum set of programs.
    * Safe Mode '''With '''Networking; Same as above, but with internet access.

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    /var/audit/current
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    exit
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

    Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
    Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
    Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
    If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • I get a 3914 error when I try and restore my iphone 4. my screen goes white and then all different colors. what should I do?

    i get a 3914 error when i try and restore my iphone 4. my screen goes white and all different colors  what should i do

    first try a different usb cable, remove all other usb devices, and try a different port in back on desktops if possible.  if no luck see these
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

    I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

    Sounds like a hardware issue.  Bring the phone to Apple for evaluation.

  • When I turn on my ipod touch the screen goes white and stays white.

    When I turn on my ipod touch the screen goes white and stays white.  It plays but all I see on the screen is white.  I cannot change anything.

    It iTunes is asking to enter the passcode then:
    - A data recovery company may be able to help
    - Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

  • I start my mac book pro and the screen goes white with an apple in the middle

    I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging  but then it turns
    off again

    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Computer says almost out of disc start up space the. Screen goes white after signing in.  How do I clear space so I can sign in?

    I get a message that says low disc space for start up when I go to sign in.  After I do sign in the screen goes white.  Is there any way to delete items so I can sign in and clear more disc space.  I don't want to lose everything and apple is not covering a tech call. 

    Start up in Safe Mode http://support.apple.com/kb/HT1564

  • The App Store just goes white when I attempt to search for apps.

    My App Store screen just goes white when I attempt to search for apps. You can tell it tries for a few seconds and then nothing but white.

    See if any of these suggestions from appletoolbox.com work for you.
    Please try each step until you resolve your issue:
    Tap Settings > General > Date and Time > Set Automatically > Off. Set the date one year ahead. Then try to access the App Store.
    It may be a connection issue. Try changing your DNS settings to Google’s open DNS by tapping Settings > Wi-Fi >, tap the blue arrow next to your current Wi-Fi network, and then tap the “DNS” field and enter the DNS servers; 8.8.8.8 (Google’s Public DNS). (see this article)
    Close the App Store completely by pressing the home button twice, pressing and hold the App Store icon until it starts to wiggle, then tapping the minus sign to close it. Re-launch the App Store.
    Restart your device by pressing and holding the sleep/wake button until “Slide to Power off” appears.
    Launch the App Store; if it is still blank with nothing shown, wait a few minutes. Sometimes apps may load slowly because of networking issues.
    If still nothing appears, try changing the device’s language by tapping Settings > General > International > Language. Pick a language. Pick any other second language you already know or be familiar with. If you don’t, do not forget to navigate back in a different language. Change the language, launch the App Store, then change the language back to what it was originally.
    Sign out of your Apple ID by tapping Settings > iTunes & App Store, tap your Apple ID and select “Sign Out”. Wait one minute and sign back in by reentering your Apple ID and password.

Maybe you are looking for