Samsung SE-506 no longer functions after Yosemite update

I have a late 2013 MBP, was using Toast Titanium 11 for covering iMovie projects to burn onto Blu rays, with a Samsung SE-506. For the majority, had no issues, and successfully completed several projects - both to BR and DVD. After updating OS to Yosemite in the last 2 months or so, I have been completely unable to utilize the Samsung drive for this. Discs are never recognized, and I have tried 3 types (BR, DVD, DVD-DL). I've checked in hardware profiles, and the drive does show up correctly when connected.
Can anyone offer any other advice? I've checked in with Roxio community groups for help and no one has been able to find a fix from the handful of suggestions given there.

Try a new USB cable or better still, plug the USB cable into a powered USB hub.

Similar Messages

Hp5520 scan no longer works after Yosemite update

My hp5520 has been working fine for both printing and scanning wirelessly from my iMac until the recent Yosemite update. I can still print, but can no longer scan. What is the solution for this? Is there a driver update needed for Yosemite? I need my scanner back....
Thanks!

cajanie wrote:
.. Is there a driver update needed for Yosemite? I need my scanner back....
Hi,
Did Apple kill it ? Have you asked Apple ? Please try:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPhoto (9.6) No longer works after Yosemite Update! Please Help. The error message I get is below.

Error Message:
"Your photo library is either in use by another application or has become unreadable.
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
I have performed the instructions above with the exception of the restoration from a backup.(Option/Command no longer yields a menu. Just the error message again). Really hoping there is a fix outside of the restoration since I have neglected to back up for some time.
P.S. I see that this is happening to others....I have another Mac to update to Yosemite and fear the same results.

Every time there is an update to anything someone somewhere has an issue. That's why backing up prior to updating is so important.
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

.WAV files no longer readable after Yosemite update

The issue:
I recently did the switch to Yosemite. I now find some .WAV files to be no longer readable through FCP X, Preview app, QT, etc. BUT, I can open them through VLC, and also Soundtrack Pro. The problem:
An FCP X project with this .WAV files has already been edited, with multiple cuts (46 to be exact) throughout the 35 minute timeline. The file is still visible on timeline with all cuts but is now silent. Looking to relink that audio with a working file. The original files' timecode starts at 09:46:30:09, with 7 channels of audio. What I tried to do:
Open in Soundtrack Pro and simply "Save as" a new .wav file. Still not readable. Then brought the original file in to a new Multitrack Project in Soundtrack Pro, exported to .wav, which is now readable by all programs, but cant be relinked since info are not matched (channel count and timecode) "Incompatible file.
The original file and new file have different audio source and channel counts.
Relinked files must have the same media type and similar audio channels as the original files, and must be long enough to cover all the clips that reference the files."
My system:
FCPX (10.1.3)
OS X 10.10 (Yosemite) iMac (27 inch, Late 2012)
3.4 GHz Intel Core i7
32 GB 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048 MB

Thanks Martin. Thats just what I'm going to do. For the record, I have been dealing with Apple support concerning this issue for the last month. It's been a frustrating and exhaustive process and the outcomes has been underwhelming to say the least:
It seems that under OSX Yosemite, Apple Core Audio , which plays audio in all the apple apps: QT, iTunes, FCPX, Logic Pro X etc, can no longer read multi-track WAV files larger than 2GBs. I tested this extensively myself, and the support staff member I was dealing with was able to re-create the problem at his end.
Apps that do not use Core Audio CAN play the WAV files: QT7, Adobe Premiere, Audacity etc.
Using this information the support member helping me escalated the issue to the Apple developers teams for both FCPX and OSX. He said he was really unimpressed by their response, and that while they acknowledged that there 'may' be an issue with Core Audio they didn't care enough to investigate it. He said that while a fix may come in the future there is no timeline for it to happen. He said he wasn't allowed to recommend that I downgrade, but he then rather embarrassingly admitted that I have no choice if I want to have a functioning project again.
Which makes a mockery of my decision to use FCP over Premiere based on the assumption that Apple would better support their software. FCP has pretty much ****** me off right from the start with its babyish interface and glitchy behaviour. Now I have to downgrade my system to Mavericks, in order to limp to the finishing line with this edit, before I will be ridding myself of this junk for good.

Western Digital MyBook Studio no longer works after Yosemite update

A little while ago (Jan 30) I updated Yosemite, and now my Western Digital My Book Studio (using firewire) shows up but no longer works - no Time Machine, or Super Duper back-ups. Does anyone know why this has happened, and what can be done to fix it?

I should add that the drive works fine with another MBP running OSX 10.6.8. Again, with 10.10.2 it either doesn't work or is incredibly slow.

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

HT1766 ipad no longer functions after accepting an updated version of "Hayday"

ipad no longer functions after accepting an updated version of "Hayday"

Unfortunately it was a blinding flash of the obvious that fixed my issue...
Simply rebooting the iMac brought it back to life.
Duh.
I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

Usb port not working after yosemite update please help

ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm    2.7.2f16
com.huawei.driver.dc_net    1.0.2
com.huawei.driver.cdc_acm    2.6.2f17
com.huawei.driver.cdc_usb_bus    1.0.3
com.huawei.driver.HuaweiDataCardDriver    4.25.45
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.70
com.apple.driver.AGPM    100.14.37
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHDA    266.5
com.apple.driver.AppleMikeyDriver    266.5
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.ApplePolicyControl    3.7.21
com.apple.driver.AppleLPC    1.7.3
com.apple.driver.AppleUpstreamUserClient    3.6.1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleHV    1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleIntelHD3000Graphics    10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
com.apple.driver.AppleBacklight    170.4.12
com.apple.driver.AppleMCCSControl    1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleThunderboltIP    2.0.2
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.driver.AppleIRController    327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.iokit.SCSITaskUserClient    3.7.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.5
com.apple.driver.AppleUSBHub    705.4.1
com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
com.apple.driver.AppleFWOHCI    5.5.2
com.apple.driver.AppleSDXC    1.6.5
com.apple.driver.AirPort.Brcm4331    800.20.24
com.apple.driver.AppleAHCIPort    3.0.7
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
com.apple.iokit.IOUSBMassStorageClass    3.7.0
com.apple.AppleGraphicsDeviceControl    3.7.21
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    11
com.apple.driver.DspFuncLib    266.5
com.apple.kext.OSvKernDSPLib    1.15
com.apple.iokit.IOAudioFamily    200.6
com.apple.vecLib.kext    1.2.0
com.apple.driver.AppleHDAController    266.5
com.apple.iokit.IOHDAFamily    266.5
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOSurface    97
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleGraphicsControl    3.7.21
com.apple.driver.AppleBacklightExpert    1.1.0
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.iokit.IOBluetoothFamily    4.3.0f10
com.apple.driver.IOPlatformPluginFamily    5.8.0d49
com.apple.iokit.IOUSBUserClient    705.4.0
com.apple.driver.AppleSMC    3.1.9
com.apple.driver.AppleUSBMultitouch    245.2
com.apple.iokit.IOUSBHIDDriver    705.4.0
com.apple.driver.AppleUSBMergeNub    705.4.0
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily    4.2.1
com.apple.iokit.IOEthernetAVBController    1.0.3b3
com.apple.iokit.IOFireWireFamily    4.5.6
com.apple.iokit.IO80211Family    700.52
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.7.0
com.apple.iokit.IOUSBFamily    705.4.14
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    389.1
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
com.apple.kec.pthread    1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0

I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

My early 2008 Macbook Pro is suffering from black screen after Yosemite update

My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

Hello Adam,
I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software.
How to install OS X Yosemite on your Mac
http://support.apple.com/en-us/HT6412
Regards,
-Norm G.

Mac mail CRASHING after Yosemite update 10.10.3

Are you KIDDING APPLE?
mac mail CRASHING after Yosemite update 10.10.3
The program is completely unusable and crashed after update.
Computer is less than 1 month old and can't run a basic mail program
I REALLY HOPE APPLE FIXES THIS BUG ASAP
Without fix I will return the computer

True,
I also have AppleCare, but unfortunately, after calling them they can't determine what is creating the problem either.
Other forums have shown other troubleshooting steps which didn't solve my problem, but may help others:
Mail app keeps crashing after Yosemite update
Mail crashing after upgrading to 10.10.3
Lets cross our fingers that 10.10.4 will be out shortly to fix this

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

Lacie Rugged external drive will not show up after Yosemite update.

Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.

I have the exact same issue. Have you had any luck with a solution?

After yosemite update I'm unable to type in word

After Yosemite update I am now unable to type in any of my word documents. Any suggestions?

Sorry for hijacking your post -
I have had an issue with my Lumia 820 too after installing the Amber update.
The phone once updated displayed " restarting " and from that point on has failed to go beyond the screen that displays the Nokia logo.
Spoken to Customer care guys and tried hard resetting the device but to no avail.
Unfortunately for me i haven't made a back up of the data i have on the phone and I have extremely important business contacts and other relevant info that I can't afford to lose, hope I am provided with a solution.

My keyboard failed to function after software updates

what should i do..my keyboard failed to function after software updates. i'm using virtual keyboard now.

It would help us to know which comp model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
This will help in providing you with the proper and/or correct solutions.

Samsung SE-506 no longer functions after Yosemite update

Similar Messages

Maybe you are looking for