Samsung Smart TV Remote and Standby Mode

Hi All - A few months ago I got a Samsung Smart TV that came with a pretty nice remote. It really can control almost all aspects of the FiOS service, but there are a few commands I cannot figure out how to get it to send to the FiOS STB. 
First off, when I power on the TV, the STB is still in Stanby mode. It asks for me to "Press Menu to Watch ...". I cannot figure out how to get the Samsung remote to send that command or to disable standby mode on the STB. There is no menu button on this remote that's not TV-specific. 
Second, I can't figure out how to bring up the full guide using the remote. By pressing the "up" direction on the four-way button, I get some smaller version of a guide, but I would prefer to see the standard full screen guide. 
Finally, is there a way to get to the On Demand and DVR menus using the Samsung remote? 
Anway, that's the the scoop. Most other featuers (DVR, etc) work pretty well. 
The remote I'm using is a RMCTPF1AP1 and the STB is running version 1.9.7 and build 19.45. It's a QIP7232. 
Thanks in advance for any guidance on getting this working. 
Dave

I'm not sure if you are turning the STB off or if the idle timer is doing it.
No reason to turn the STB off as it doesn't save any energy.
So leaving it on would alleviate one issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

  • Can I control my Apple TV with a Samsung Smart Touch Remote?

    I am trying to control my Apple TV2 with a Samsung 7 series Smart Touch remote. The Samsung universal remote options do not seem to work, nor does the Apple TV apear to be capable of reading inputs from the remote through the Apple TV 3rd party remote setup.

    I do not know if anyone else noticed this. I have a Samsung Un55hu7250 and the above solution worked with one exception.
    If you add it as a "Home Theater" type system then, you cannot tell the TV to use your actual home theater system for the volume control.
    If you instead, On your tv got to system/device manager/Universal remote setup. Then choose blue ray device and type in apple. Select Apple, do the power on test, then select "no it didn't work". Then it will ask you to enter the model number of the Blue Ray device. Type in "Apple" in the search and it will list Both Apple1 and Apple2 in the device list. Select Apple2 and then you will have an Apple TV that is configured as a DVD Player so you can tell the TV to control the volume via the Home Theater system.
    Net result, I have one remote again finally with Apple TV, Samsung TV, Dish Hopper, Sony BD, Antenna TV and surround sound. (Only if you are using the optical audio out to the theater system)

  • Hardware sleep, hibernation and standby mode tracking

    Is there a way to find out that the hardware user is on is about to go into sleep, hibernation or standby mode? I need to be able to save data to the server before the hardware temporarily shuts down. I can't seem to find anything online that addresses this issue. I want to create a code similar to the Windows Media Player that kicks in a warning before changing modes. Thanks.

    Hello avwood:
                You might have add on running on your Google Crome Browser . Just dissable all your Google Crome add ons. See if that does trick. If no add ons are enabled then just un install  it and down load a new copy.  Then see if your computer goes to to sleep. If neither one these methods  work. Then most likely it is being run by U.S.A.  government spy crape back ground hiden program. I wouldn't recommend using it in the first place. frrw

  • CoreCenter and Standby Mode

    I have just standby to use Standby Mode, having read the recent article on electricity consumption in PCPro magazine (UK). However after the machine comes out of standby, CoreCenter v1.7.3(set to start on boot and run in the system tray) starts giving an alarm (much like a car alarm siren) ; the only way to stop this is to close CoreCenter and then reopen it when it is fine and no longer gives an alarm. I guess it is confused and thinks there is fan failure or something similar. Does anybody have CoreCenter and Standby running together?Ho do I work out what is causing the alarm?  I have CoolnQuiet enabled in the BIOS, if I do not run CoreCenter will CoolnQuiet still run and what about control of my Zalman 7000 Processor Fan?
    many thanks
    Paul

    Quote from: Tiresmoke on 31-March-05, 00:00:18
    Dale the fans will still change speed according to the temps but it will be a smaller change and not as quick. CoreCenter does allow better fan control As does Speedfan, MBM and others. Keep in mind that many of us feel CoreCenter is a real turd and do not run it at all so we know it is not needed. You may like it and as such we won't tell you not to run it. However it does not change the fact that it is not needed to make C&Q work.
    I'm seeing very little in the way of fan-control on my system with or without corecenter. Last night the CPU temp went from 25C (as measured by PCWiz2005, which matches what corecenter shows) to 42C under 100% load generated by prime95. Fan speed from 25C to 42C ranged from 2343rpm to 2410rpm. Max rpm on startup is around 3300rpm from memory. Is 42C too cool for the corecell chip to consider ramping up the revs on the fan?
    On startup the cpu fan is locked at 3300rpm. I have to run corecenter to get it to drop back to 2300rpm.
    I'm not seeing anything like reasonable fan-control on this system.

  • Syslogd makes high CPU Load and standby mode doesn´t work.

    After updating to Leopard I see high CPU Load caused by syslogd daemon(40%-80%) and my MacBook has problems with standby mode. After stopping the white LED lights and CPU fan speeds up. Is there any chance to fix these problems?

    OK.. here's where I'm at with troubleshooting this. As I said before, for ME it occurred simultaneous to a low or out of memory situation. I don't know if syslogd was using my the ram, or if the low ram was a symptom of an issue that syslogd was getting caught up in reporting... but the system log file had tens of THOUSANDS of out of memory errors listed. Almost all were from dashboard.
    So... I've done the following. In dashboard I closed ALL open widgets. I disabled spaces (since in another thread someone indicated it used a lot of memory). I ran Leopard Cache Cleaner and used it to perform maintenances, run the os scripts and rebuild caches and so on. Rebooted.
    Now its working fine! Since then its been over 24 hrs and I STILL have over 300megs of ram reported free on a 1 gig system. I've used everything else like normal (safari, mail, ichat, itunes, etc..). Where the problem used to happen after a couple of hours after a reboot every time, now it seems normal. No out of mem, and syslogd is running normally (apparently).
    I will run a few apps that I havent run in a while and see if those create an issue. If not, later today I will enable spaces and see how that does after a few hours. Finally I'll add in the dashboard widgets one at a time to see if the issue lies there. I'll report back here if I discover anything.

  • Can synced lights, a wireless shutter remote and live mode work at the same time on the Canon600D?

    I have a pair of synced lights connected through the hot shoe, and I'd like to use live mode and a wireless shutter remote to take self portraits from a distance... is this possible with the Canon600D? (Rebel T3i)
    I'm finding that turning on live mode stops the lights from flashing, and even with it off, the lights won't flash if I use the remote to take the photo.
    Help would be very appreciated! 

    Did a quick search, I don't think the 600D has the 'silent shutter' option.
    But I might be wrong, it might only be manual only flashes that don't fire in Live View, TTL flashes (any brand) may work.  Maybe it has something to do with the mirror being locked up.   Regardless, a wireless trigger will behave the same as a non-TTL flash, so it's not going to work with off camera flash.
    However, I think that Magic Lantern has a fix for it.  Might look into that if it's something you need.  That said, I've taken hundreds, probably thousands of photos of myself without Live View.  Just tether to a laptop/tablet and you can see the results after you take the shot; adjust accordingly.

  • Acelloratermeter and standby mode iphone

    hi,  basically im making an iphone game app which is controlled by tilting the iphone (acellorator events) and when testing, the game works great but goes into stanby mode (screen dims then goes black [lock screen mode]. Its obviously not registering the tilting as an activity so its like it thinks the phone is just doing nothing and goes standby.  can someone help me solve this?  is there a line of as3 i need to include?  thanks a lot  jonny

    Quote from: Tiresmoke on 31-March-05, 00:00:18
    Dale the fans will still change speed according to the temps but it will be a smaller change and not as quick. CoreCenter does allow better fan control As does Speedfan, MBM and others. Keep in mind that many of us feel CoreCenter is a real turd and do not run it at all so we know it is not needed. You may like it and as such we won't tell you not to run it. However it does not change the fact that it is not needed to make C&Q work.
    I'm seeing very little in the way of fan-control on my system with or without corecenter. Last night the CPU temp went from 25C (as measured by PCWiz2005, which matches what corecenter shows) to 42C under 100% load generated by prime95. Fan speed from 25C to 42C ranged from 2343rpm to 2410rpm. Max rpm on startup is around 3300rpm from memory. Is 42C too cool for the corecell chip to consider ramping up the revs on the fan?
    On startup the cpu fan is locked at 3300rpm. I have to run corecenter to get it to drop back to 2300rpm.
    I'm not seeing anything like reasonable fan-control on this system.

  • Oracle RMAN recovery catalog database in a Primary and Standby mode

    Hello All,
    The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups. There are are 200+ databases running on OEL, RHEL and Windows. So we planned to host the recovery catalog database on Oracle Active DataGuard 11.2.0.1 Enterprise Edition on RedHat EL 5.8 version on two physical servers. The Primary Instance will be in one server in the Primary DC and the Standby Instance will be on another server in another DC. Also all the database datafiles are hosted in ASM Diskgroups on SAN (DATA, FRA, REDO, ARCH diskgroups).
    Are there any specific RPM/patch/OS user custom/specific settings or configurations needed..?
    Thanks in advance..
    Regards,
    Abhijit

    "The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups"
    Hi,
    i think you can achieve HA for the catalog DB. (Rac and Asm should work fine)
    There's no way (afaik) to use TAF with the rman backup. If you have a failure during a backup it simply fails.
    There is no TAF in this situation.
    Hope this helps.
    Regs,
    Drew

  • Cthelper.exe+and standby mode=ERROR

    Did somebody solve problem with chhelper.exe? when my comp resumes from standby i see a standart windows error message about cthelper.exe - and only 2 buttons(close, send to ms).
    what need i do to make cthelper.exe be working correctly?

    Hi,
    Used maybe the Safe Modus with the option the last function configuration and made a repair from the System files.
    Go this not made a restart with the OS CD and made a repair from the System files.
    By

  • How can I share my photo's, music and video's with Samsung Smart TV??  I am using Lion.

    We bought a Samsung Smart TV saturday and now I want to share my files with AllShare or something else.
    Is somebody here who knows how to share??

    You need some software running on your mac such as elgato's eyeconnect.
    This allows your tv to stream content from the mac.
    There is currently a free 30 day trial of the software.  I have it and it works fairly well although some protected content such as itunes purchased movies do not play although it has no problem streaming movies i have copied onto the mac from dvd's i own.
    Drew :-)

  • AIR 3 on Samsung Smart TV

    Are ther any plans to include AIR 3 on Samsung Smart TVs ? (and Flash Player 10.3 )

    Hi Turn on mirroring in control panel But I have a feeling this may be blocked due to recording Or copyright. I  can do this with my Apple TV Cheers Brian

  • Can you get Adobe for a Samsung Smart TV?

    I Have a few friends with Samsung Smart TV's and they want to know if adobe can be installed on their tv's?

    NO.
    Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Cellular data charges may apply.

  • How to program my ATT remote to control volume on my Samsung Smart TV

    I am only able to change channels on my Samsung smart TV via my AT&T remote. I would like it to control the volume as well but have been unsuccessful at being able to get the volume programs on the ATT remote.

    This is more complicated now with the S-20 remote. You must have an s-10 because you cannot change TV channels on an s-20. MAybe you meeant you caan change u-verse channels.
    If you have an old s-10 with mode buttons the volume on the TV in all modes is the default after programming the TV. So, if yo do not have tv volume control, you have not yet found the correct code. If you want to start from scratch, the factory defaul program is att/ok -900.
    If you have a new s-20, without mode buttons, the default is STB volume control. You need to change it. Here are the directions - http://www.att.com/esupport/u-verse/remotes/

  • Can't record when box is in standby mode and other...

    Once my youview box has been put into standby it will not turn on with just one press of the remote but if I press the button 10 to 15 times it will usually come on after 4 to 5 minutes. during this time, the remote will not switch my Sony Bravia tv on but it will shortly after the youview box comes on. To compound the frustrations, I will usually get an IPC6023 message on the tv screen telling me that the channel I'm tuned to is unavailable but the channel is patently available because once I have pressed the ok button three times the channel plays with perfect picture and sound. 
    Also any recordings scheduled whilst the box is in standby mode either fail or just do not record. I presume this is because of the IPC6023 problem.
    One other thing. I am at the moment watching the tv but the youview box is showing the mauve standby light rather than the blue lights which should indicate it is on and also the recording light is on despite the fact that it is not currently recording any programmes, I presume the recording light is on because the box thinks it is still trying to record a failed programme which was set to record whilst the box was in standby mode.
    I have checked my broadband and cables and they do not seem to be the problem
    BT has supplied me with  a 2nd Youview DTRT2100 box and this has exactly the same problems. I changed the hdmi cables and the Ethernet cables after finding this same problem occurred on the 2nd box but there is no difference.
    I have now had 3 Cube engineers visit to check my problem but all they do is a factory reset, deleting any recordings that I have managed to make while the box is not in standby mode and then leaving with the problem unsolved, Now that I’ve received a replacement box which has exactly the same problems, I do not want to go through the whole rigmarole again

    Hi Colin6443,
    Welcome and thanks for posting!
    Sorry for the problems you're having with your Youview box and that it's going on for so long.
    Send over your details and we'll help get things sorted from here.  Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
    All the best,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system prefer

    how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system preferences.  what else do I need to do?

    First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
    I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
    Matt

Maybe you are looking for