Samsung SME1920x can't get max resolution
Hello - I'm running a new Mac Mini with dual displays: Samsung 192N via VGA connection, and a Samsung SME1920x with an HDMI to DVI cable. In theory, the SME1920x can do 1900x1080, but the most I can select via the control panel is 1366x768. The Mini recognizes the monitor as a SME1920, but doesn't offer the higher resolution.
any ideas? thanks very much!
Whoops! Ok, so I'm tired, lol...just realized that the higher resolution was for a different monitor that I was considering buying...the SME 1920x is actually running at its peak resolution.
sorry!
Similar Messages
-
HT1379 Help! can´t get 2560 resolution in dell 2711 on macbook pro retina late 2013, only 1920...
can´t get 2560 resolution in dell 2711 on macbook pro retina late 2013, only 1920...i have the apple thunderbolt to dvi adapter and the dual dvi cable...
thanks for any helphttp://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.3- 15-dual-graphics-late-2013-retina-display-specs.html
says:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single 1080p display at up to 60 Hz, 3840x2160 at 30 Hz, or 4096x2160 at 24 Hz via HDMI. Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required? -
I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?
I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa -
How can I get the resolution of an image file in JSP?
how can I get the resolution of an image file like jpg,gif,png in JSP ?
Hii,
If by the resolution, u mean size..this is how u can come to know....
String add = "path/to/some.jpeg";
javax.swing.ImageIcon chain = new javax.swing.ImageIcon(add);
int height = chain.getIconHeight();
int width = chain.getIconWidth();
Hope that helps.
regards
-
How can I get max, min & average (hours with minutes) of fast 30 days data
Table name:
run_log
TYPE VARCHAR2(10),
SUBTYPE VARCHAR2(10),
PROGRAM VARCHAR2(100),
STATUS VARCHAR2(20),
START_TIME DATE,
END_TIME DATE
How can I get max, min & average (hours with minutes) of fast 30 days data ?Hi,
you have to use analytical functions:
SELECT start_day,
round(AVG(daily_avg)
over(ORDER BY start_day ASC RANGE BETWEEN INTERVAL '30' DAY preceding AND INTERVAL '0' DAY following)) AS moving_avg,
round(MAX(daily_max)
over(ORDER BY start_day ASC RANGE BETWEEN INTERVAL '30' DAY preceding AND INTERVAL '0' DAY following)) AS moving_max,
round(MIN(daily_min)
over(ORDER BY start_day ASC RANGE BETWEEN INTERVAL '30' DAY preceding AND INTERVAL '0' DAY following)) AS moving_min
FROM (SELECT trunc(t.start_time) start_day,
AVG((t.end_time - t.start_time) * 24 * 60 * 60) AS daily_avg,
MAX((t.end_time - t.start_time) * 24 * 60 * 60) AS daily_max,
MIN((t.end_time - t.start_time) * 24 * 60 * 60) AS daily_min
FROM run_log
GROUP BY trunc(t.start_time)) t
ORDER BY 1 DESCAnalytical functions are described in the Oracle doc "Data Warehousing Guide".
Regards,
Carsten. -
T510 w/ NVS 3100m can't show max resolution for a dell 30Inch
T510 Docked
Windows 7 64bit
Dual-Link Cable attached to Dell 3007WFP monitor.
Max Resolution is 1280x800
Ironically, I have a second monitor attached on the DVI port 2 Single Link and this is 1600x1200
NVIDIA NVS 3100m
Why can't this display the max resolution for this monitor.
I have the latest driverssonniep5 wrote:
I had same issue, tech support advised me to return T510 since it didn't ship what I ordered. In my case the resolution should be 1920x1080.
you are talking about the FHD on the T510, this is slightly different to what the OP is asking.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Can I get full resolution images on my iPhone?
I was wondering if there's a way to get full resolution images on my iPhone, because everything that I synched get's blury when you zoom in. I know that the images on my computer are big enough, because on of the smaller ones is 1024x1578.
Check this link - about halfway down under "Photo Optimization and Storage Requirements".
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-ipod-ph oto-pictures/ -
Can't get correct resolution for second monitor
I am trying to use two monitors with a Vostro 1400 (Intel X3100 video card), the problem is I can't set the external monitor to 1280x1024. Gnome's screen resolution program only let me choose from 640x480 to 1360x768. Besides the resolution of the second monitor, everything else seems to be working fine. Some relevant info:
Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 25 02:18:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Failsafe Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Intel GMA X3100"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "RENDER" is enabled
(**) Extension "DAMAGE" is enabled
(**) Extension "XFIXES" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfeb00000/1048576
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "exa"
(**) intel(0): Option "DRI" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xFEA00000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Failsafe Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(**) intel(0): Option "NoDDC" "True"
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1280x800@60
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(**) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (336, 210) mm
(**) intel(0): DPI set to (193, 247)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x00000000
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status:
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x0001f5f6 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x0000fafb to 0x00014141
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfea00000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] mapped front buffer at 0xe0100000, handle = 0xe0100000
(II) intel(0): [drm] mapped back buffer at 0xe5600000, handle = 0xe5600000
(II) intel(0): [drm] mapped depth buffer at 0xe6a00000, handle = 0xe6a00000
(II) intel(0): [drm] mapped classic textures at 0xe7e00000, handle = 0xe7e00000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 62914560 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05600000 (pgoffset 22016)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06a00000 (pgoffset 27136)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x07e00000 (pgoffset 32256)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
(II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
(II) intel(0): 0x00100000-0x019fffff: front buffer (25600 kB) X tiled
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a00000-0x055fffff: exa offscreen (61440 kB)
(II) intel(0): 0x05600000-0x069fffff: back buffer (20480 kB) X tiled
(II) intel(0): 0x06a00000-0x07dfffff: depth buffer (20480 kB) Y tiled
(II) intel(0): 0x07e00000-0x09dfffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(EE) intel(0): underrun on pipe A!
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.2
(**) Option "Device" "/dev/input/event9"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(**) Option "SHMConfig" "True"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) Video Bus: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) Video Bus: xkb_variant: "abnt2"
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event7"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) config/hal: Adding input device Microsoft Microsoft Trackball Optical?
(**) Microsoft Microsoft Trackball Optical?: always reports core events
(**) Microsoft Microsoft Trackball Optical?: Device: "/dev/input/event5"
(II) Microsoft Microsoft Trackball Optical?: Found 5 mouse buttons
(II) Microsoft Microsoft Trackball Optical?: Found x and y relative axes
(II) Microsoft Microsoft Trackball Optical?: Configuring as mouse
(**) Microsoft Microsoft Trackball Optical?: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Trackball Optical?: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Trackball Optical?" (type: MOUSE)
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event11"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) Video Bus: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) Video Bus: xkb_variant: "abnt2"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event10"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) Video Bus: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) Video Bus: xkb_variant: "abnt2"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) AT Translated Set 2 keyboard: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) AT Translated Set 2 keyboard: xkb_variant: "abnt2"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11673 )
AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11674 )
AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11675 )
(EE) intel(0): underrun on pipe B!
xorg.conf
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "GLcore"
Load "glx"
Load "dri"
Load "int10"
Load "vbe"
EndSection
Section "Device"
Identifier "Intel GMA X3100"
Driver "intel"
BusID "PCI:0:2:0"
Option "DRI" "True"
Option "NoDDC" "True"
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
Option "ExaNoComposite" "false"
Screen 0
EndSection
Section "Monitor"
Identifier "Failsafe Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1280x800"
Horizsync 31.5-50.0
Vertrefresh 56.0 - 65.0
modeline "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
DisplaySize 336 210 # 96 DPI @ 1280x800
Gamma 1.0
EndSection
#Section "Monitor"
# Identifier "Monitor externo"
# Vendorname "Samsung"
# Modelname "917p"
# Horizsync 31.5-50.0
# Vertrefresh 56.0 - 65.0
# modeline "1280x1024@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
# DisplaySize 339 271 # 96 DPI @ 1280x1024
# Gamma 1.0
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1280x800@60"
#Modes "1280x1024@60"
Virtual 2560 2048
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "XFIXES" "Enable"
EndSectionichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
Yes, I tried xrandr:
$ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
$ xrandr --addmode VGA 1280x1024
$ xrandr --output VGA --mode 1280x1024
$ xrandr --output VGA --right-of LVDS
At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
$ xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800@60 60.0 +
1360x768 59.8
1024x768 60.0*
800x600 60.3 56.2
640x480 59.9
1280x1024 60.0
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.0*+
1024x768 85.0 75.0 70.1 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
TV disconnected (normal left inverted right x axis y axis) -
Vizio hdtv via VGA to HDMI cable - can't get correct resolution
I'm trying to configure the resolution for a Vizio va22lfhdtv10t on a Mini. When I used a DVI to VGA adapter the resolution was very good at 1920*1080. Now that I'm using a DVI to HDMI cable it defaults to 1080p with 30hz refresh. Font resolution is terrible on this setting and only marginally better when trying the other resolution options. I have seen some posts about creating a custom resolution, but don't know how to do this, or if there is a danger of damaging the LCD with improper settings. Has anyone gotten this HDTV to work other than as a VGA display?
Thanks!1920 x 1080 is the native resolution, so (a) I wouldn't try any other resolution, and (b) I'd ONLY use a digital input (HDMI).
If you're getting crummy unsharp pictures, it sounds as if the TV's scaler is working. You need to look for a menu setting (on the TV) to turn off the scaler. It might be called something like "1:1 pixel" mapping, or "overscan OFF" or some thing similar.
I see on the manual p.35:
+4. Wide - The Wide option lets you determine how the image appears on the screen. Select Normal, Wide, or Panoramic.+
Try those three. My guess is you want "wide" mode for a 1920x1080 feed.
Also, H and V size and position can be adjusted (p.35/36) - maybe that will help? -
How can I get MAX (Labtop) to see my PXI system?
I have a PXI system consisted of PXI 8184 (Microcontroller) and PXI 6552. I wish to run LabView 8 application on my labtop and run it and see how the PXI device respond to my application. TO establish the communication I read that I can use a CAT5 crossover cable or a hub. I couldn't get the PXI system to show up under Remote Systems in MAX residing in my labtop.
How can I solve this problem can any body clue me on that?
ThanksGreetings!
1) Are you using a PXI system which has an embedded controller
with Real Time (RT)?
2) Did controller have RT installed / shipped with it. We can
confirm that in the bios if the LabVIEW RT menu options show up?
3) Listed below are few links you can go through to get started
and troubleshoot. Specifically the chapter 2 in the manual for 8184
http://www.ni.com/pdf/manuals/370836b.pdf
http://digital.ni.com/public.nsf/websearch/A43DD6F680D123DD86256F870002B6A2?OpenDocument
http://www.ni.com/support/install/install_hardware_5.htm
4) When you connect a monitor to the controller what do you see in
the screen?
5) Did you get a chance to install the embedded sw CD that came
with the controller in your host computer?
6) You can also verify if you have a folder similar to following
in your host computer after the installation (Similar to the following)
C:\Program Files\National
Instruments\RT Images\Base\2.0\7151
Thanks and hope this helps to get you rolling
Good luck
Avi Harjani -
How can I get full resolution from my Mac mini?
I have a Mac mini (Late 2014) and an LG 27MP35HQ-B monitor. I’m using an HDMI / mini-DisplayPort (Thunderbolt) cable.
The 27MP35HQ-B supports resolution of 1920 x 1080. The Mac mini supports resolution of 1920 x 1080 using the HDMI port and up to 2560 x 1600 via the mini-DisplayPort.
But the best resolution I see on the Displays Preferences menu for the Mac mini is 1600 x 900. Any suggestions on what I can do to up the resolution?Try using one of these apps:
SwitchResX – The Most Versatile Tool For Controlling Screen Resolutions On Your Mac
Display Menu from Mac App Store -
Can I increase max resolution or turn off snap to grid?
I was wondering if someone could help me with an audio editing problem/question. I'm trying to cut audio at 0 on the waveform and I'm not able to cut exactly where I want to. I've zoomed in all the way and pressed control.shift, which, I guess, incresses the resolution to the maximum (ticks). I find that the cut line is still moving in rather large jumps and I'm not able to cut where I would like (at 0 on the waveform). Is there a way to turn off the snap and increase the resolution even more?
try holding only ctrl instead of ctrl-shift,which doesn't do anything in arrange if i remember well(use that in the matrix)
on the top right of the arrange you can choose the snap setting -
Just got Verizon FIOS 25/25 - Can't get max mbps under boot camp
I have Macbook Pro c2d unibody. I just got Verzion FIOS. Under Mac OS X Snow Leopard I am able to achieve max download and max upload speed. But under boot camp and windows xp sp3 I am only able to get half down, and almost full up. Does anyone know what the issue could be? I've updated my drivers and everything.
You want to post in the Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237 -
How can i get low resolution pictures to print
I just bought a office jet pro 8600 and got on hp e-print for the sole purpose of printing pictures off of my iphone and ipad. I just sent an e-mail to the printer and it only printed "sent from iphone." It says there is some technology preventing printing of low resolution images... usually from camera phones. Any ideas or help.
ThxHi DChip56,
Here are some printing tips for printing from your iPad and iPhone (particularly items in bold):
All photos e-mailed with HP ePrint will print at a default size of 4 x 6 inches (101.6 x 152.4 mm).
If your HP ePrint-enabled printer does not have a separate photo paper tray, just make sure that photo paper is the only paper loaded in the tray when printing photos.
Make sure your digital images have a high enough resolution, or dpi (dots per inch). Image files (like jpeg, bmp, tiff, etc.) need to be at least 100 dpi in order to print via HP ePrint.
Make sure your image attachments are smaller than the 5 MB (megabyte) limit.
If you send a photo that is less than 100 dpi, it will not be printed. Instead, you will see a message in your job history on the ePrintCenter that says “Failed”.
To print a photo or image that is less than 100 dpi, insert the image file into a Word document before e-mailing. Your image will be printed on paper from the main printer paper tray.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
How can I get MAX to scan for instruments on bootup?
I would like to setup MAX (or whatever SW component) to scan for GPIB instruments each time the computer is booted up. I've had one strange case where MAX somehow "lost" it's GPIB instrument configuration and the only way to recover was to manually start MAX and do a scan for instruments. I already do this for the VXI resource manager.
PS - I see the VISA configuration file, visaconfig.ini, has an "AlwaysRefresh" option line. Is there anyway to set this short of a direct edit?
Thanks,
Ed PerkinsScott - If I understand you correctly I should be able to do the following:
1. Disconnect the IEEE-488 cable from my computer.
2. Manually start MAX and tell it to scan instruments (which it will find none).
3. Plug the IEEE cable back in and re-run my application (it uses VISA to control both IEEE-488 and VXI instruments) successfully.
Correct?
What prompted this thread was one strange event. After successfully running our app the previous night (and leaving everything powered up) the app failed all IEEE calls the next morning. When we went into MAX it mysteriously showed no IEEE instruments. Nothing solved the problem (computer reboots, etc.) until we forced MAX to do an instrument refresh. Perhaps something else did go on, but I thought
running MAX and forcing an instrument refresh on each boot-up (much like running the VXI Resource Manager) would be a prudent prevention approach, especially since the station operators don't even know about MAX.
Thanks,
Ed Perkins
Maybe you are looking for
-
I have a problem with my photoshop CS6 retina display
I have a problem with my photoshop CS6 retina display. my photoshop doesn't support retina on my Macbook pro 15 retina. the version I have in my laptop is 13.0v. I was trying to update to 13.1 from my photoshop through > help > update but this option
-
How can I upload my photos to a memory stick from my iPad
-
High res art of the Acrobat Icon
I am looking for the high resolution art work of the PDF Icon to insert into a printed document. Any thoughts other than recreating in Illustrator myself?
-
Selecting HDD for video capture
I'm just now trying out OnLocation CS4 and i can't seem to locate a function/control that will let me select where to capture my video to. I have an external FW HDD that is accessable from the O/S but see no menu items in OL that will allow me to cho
-
Hi, Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure? Regards, Sujan