Samsung SW-252F CD-RW is incompatible with MSI K7N2GM-L

Warning to all NForcers
The Samsung SW-252F CD-RW is incompatible with the MSI K7N2GM-L. LG, Lite-ON, Pioneer etc work fine. I have a gut feeling the incompatibility will extend to all othe NForce2 based motherboards.
So if you want peace of mind ... give this CD-RW a wide berth.
The customer service at Samsung is also nonexistent. I emailed them about the problem three times and they didn't even bother to reply.
MSI support staff however were very helpful although they could not offer a solution.
And yes i tried a firmware upgrade that was supposed to fix the bug !

Quote
Originally posted by wootzor
It was the power supply after all, 300W is simply too weak for this board. I am now using an Antec TruePower 380W PSU, works perfectly.
I tested my Kingston KVR400X64C3A/512 overnight with MemTest86+, 22 passes and six hours later, no errors. This memory works fine with the board.
Thanks for the help everyone...
That is great! True Powers are the best IMHO!That is all I will use.Helps take the guesswork out of it.

Similar Messages

Is the MSI NX6600LE TD256E incompatible with MSI K8N Neo3 mainboard ?

Hello people,
I have a very ugly problem here. I have an MSI K8N Neo3 mainboard here, that with PCI Express and AGP slots.
It was working fine for a while, so I dont think the mainboard itself is bad.
Originally, an Inno3D Geforce 6200 with Turbo Cache, was installed on that computer. However, in the past week the owner buyed a copy of Battlefield 2 to have some fun, he also buyed an MSI NX6600LE TD256E PCI Express graphic card to replace the Inno3D Geforce 6200 with Turbo Cache.
I got that PC here today, in order to install the new MSI Graphic card, and also install the game. Now comes the ugly part: I cannot get that card to work in that computer, and I don't know why.
At first I thought that the card was defective, so I took it out of that PC and installed it on my own PC, and the card works in my PC (see signature), and my PC's graphics card works fine on the other PC (the K8N Neo3). Even the old Inno3D card works fine.
Since the card works fine in my PC (I've used it while writing this post), and my PC's graphic card works fine in the other PC, as well as the old Inno3D card, the only thing left for me to think is that the NX6600LE TD256E card is not compatible with the K8N Neo3 board, but that seems too strange for me.
Can any one here tell me if there's some kind of compatibility problems between the MSI K8N Neo3 mainboard and the MSI NX6600LE TD256 Graphic card ?
Any help is welcome,

Update:
The card is compatible with the board. What was incompatible with the card, was a little chip in the board (fried) which I didn't noticed during the first inspection of the board.
Curious thing is that it accepted other cards and not the NX6600LE, but in the end, not even my own NX6600 card, or any other PCIe card worked at all. I guess the little chip suffered some kind of damage due to power problems in the place where the computer was. With this in mind, an electrical technician will be sent to the place to verify the electrical installations for problems of any kind, so we can correct them and prevent future problems.
Back to the board thing, a new K8N Neo4-F board has taken the place of the semi-toasted K8N Neo3 board. Also, and thanks to the hibrid design of the K8N Neo3, we will still be able to use it. The PCIe slot is dead for sure, but the AGR Slot still works well, so we'll use it for traditional desktop aplications, such as word processors, internet surfing, e-mail, document scanning and printing, etc, etc, etc...
Well, that's all. I just wanted you guys to know; so no one keeps looking for an an answer to this (now solved) mystery. For me this case is now closed, so if no one is interested into it, Admins... feel free to delete the entire thread
Be well you all,
Edwin

Incompatibility Problem new Kingmax DDR400 with MSI-6585 Mo Bo

Recently just bought a new 256MB Kingmax DDR400 color module but found that it was incompatible with MSI-658(SiS648 chipset mo bo). It did works fine with the old model of Kingmax DDR400(Black chip module).However the code of the both modules are same. And I have tried configuration according to MSI and Kingmax.But found that even the just new single new DDR400 without mixing both also cannot work at frequency of 200Mhz.But the one old working fine. I exclude the possibilty of faulty of the new module cause I have tested it on other platform and do even exchange a new one from vendor.
I have emailed the Kingmax and MSI support, but none of them of reply my msg. Since it was in the category of certified module published in the MSI website, i think MSI and Kingmax will be very irresponsible for not yet test the new color module on the board.

Besides color, the old model and new model really different in term of the board. The height of new model is shorter than old one and very clearly even the layout of the chip is different. By SPD is also different.
I have tried different DIMM slot with different voltage different configuration. It is really a serious problem, but sadly still din receive any reply from MSI and Kingmax.

Samsung UN32H6350 HW Incompatible with FioS Tv App

I just learned that the TV I just bought is incompatible with my new Samsung UN32H6350. The main reason for purchasing was to run the FioS TV app w/o using a STB. Will Verizon ever update their app to be compatible with the new HW? What are my options?

skeys wrote:
I just learned that the TV I just bought is incompatible with my new Samsung UN32H6350. The main reason for purchasing was to run the FioS TV app w/o using a STB. Will Verizon ever update their app to be compatible with the new HW? What are my options?
I'm not understanding the post as you said your tv isnt compatible with your new samsung un32h6350......which is a tv.
A tv not compatible with a tv?
Did you mean the fios app is incompatible with Smart Hub on the tv? The fios app can only access very few channels and is very limited as it is.
Here is a list of all compatible tv devices (and others) with the fios app.
http://www.samsung.com/us/appstore/app/G00002441697-compatible#LED%20TV
Like most things involving Verizon Fios where we don't find things out until they actually do it, if an update is coming to make it compatible is anyone's guess.

I'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you.

Is Samsung GT-S5230 incompatible with iMac ?

Is Samsung GT-S5230 incompatible with my iMac OS 7? And can this be overcome so that I can
transfer photos and Videos to my Pictures file?

You can use SOME of the S5230 ( STAR) features in Mac OS X and you can share documents with it :
In all cases the phone needs to have a Micro SD card installed as "hard disk" ( up to 8GB work fine in it ).
The phone supports saving photos and videos either to the internal space which is only a few hundred MB or to the memory card. But you need to set the memory card as the place to save manually - else it will still save to the telephones space ( silly I know ).
You need to save photos,music,videos on the memory card in the phone ( not to the telephons own filesystem ) , you can set the default loaction where to save in the 5230s settings menu, under "memory".
The 5230 knows 3 modes it can connect to a machine. "PC Studio", "MP3 Player" and "USB Mass Storage".
MP3Player is only usebale in connection with Windows Media Player 11. Itunes can't handle that device.
Now when you plug the 5230 to a Mac you must choose "USB mass storage" as connection to get to the memory card.
This way the phone's memory card will appear in Finder as external harddisk, and thus you can access the files on it.
This phone is usable on mac/linux only in this mode for file access. The "new pc studio" software that would enable all the othe features plus access to the phone system runs only in Windows.
The 5230 has also a data/fax modem , but this is not supported in Lion, only in Snow Leopard. ( to enable that you would choose "PC Studio" as connection type when you plug it in the mac , and then OS X will report that it found a new networking device - a modem . )

SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE

Hello Experts,
Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive. I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when checking transformations.
Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error. And more TYPE is availalbe tys_TG_1_full. This type does not have 3 fields.
Please advice.
Thanks in advance.
Regards
Venkata.

Hello Rathy,
I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
Thanks for the input and points assigned.
Regards
Venkata Agraharam.

I just updated to 10.9.3. I now cannot open Mail - it comes up with an error window and suggests it may be incompatible with this OS. What is the fix for this? Thanks

When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
What is the answer to fix this?!

Backup for safety on at least two reliable drives.
Reinstall using the combo update at http://support.apple.com/kb/DL1746
You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading.

K7N2 Delta (ILSR) incompatible with 200FSB?

Is the K7N2 Delta (Nforce2 Chipset) incompatible with 200FSB??... Ive seen many problems when trying to upgrade the CPU, and use a 200FSB in various forums. So, why does it keep hanging/crashing?? Might it be not really supported even though it specify it does?

From most of the posts I've been reading about this issue, the users are trying to build their systems using Value RAM from various manufacturers such as Kingston or Corsair among others...this just isn't a reality anymore in the high speed world of components...the Delta boards require a lot of power and high speed memory nowadays and a lot of the users are just unaware of these facts...
Part time builders are the most susceptible to this as they build a system every few years and think that all of the 'old' rules apply to their situation...what 'should' be isn't anymore as we continue to design and produce faster products that require faster peripherals to support them...
Getting away cheaply has been designed out of most systems and this really stems from the CPU mfg's and how MB designers have to approach BUS speeds and the like...
CDM has it right that you need to dip a little deeper these days for good QUALITY memory and peripheral items to ENSURE that when you build your new PC that you minimize these issues from the get go...if not then you're going to have a good run at testing this RAM or that RAM to find one that is cheap and will still have the speed capability to keep up with your high end MB & components...
Apacer is a good example of this...they're moderately priced and they perform very well in the sandbox with most applications that you set before them...overclocking them can lead you down a problematic path but overall they're pretty flexible from what I've seen...
Most of us here know that Mushkin is pretty infallable and will take pretty much whatever is thrown at their modules...if not calling their CS dept gets you the kind of help that most companies only dream about providing...
All in all the 'line' has risen and it will rise again and you'll see a rash of users that will complain that "This should do what I want it to do" but as is most always the case, you'll find that they're trying to build an underpowered system that requires fast peripheral components and a lot of them just aren't willing to dish out the cash required for a great white box system...
Yes I agree that it's a scam from the companies to force us to spend more of our hard earned dollars but that is the way of the world now, albeit that it's unfortunate...if you're really good at building systems tho, you'll find that you can usually come up with a pretty mid-range priced system that will blaze thru all the latest games but that only comes with buying components to play trial & error with...much like I used to do in my Computer Store years ago...these days I don't do much of that, I just buy the good stuff and save my time...

Witch laptops are compatible/incompatible with windows XP/VISTA

Hi so i am planning on buying Apple MacBook or maybe PRO
i have a list of laptops that are served in our area:
Apple MacBook Pro MA895
Apple MacBook Pro MA610
Apple MacBook Pro MA611
Apple MacBook Pro MA897
Apple MacBook MB062
Apple MacBook MB063
and i need to know wich one of those are compatible or incompatible with Windows XP? please make a quick response
In advance thank you for your time

All of the "MacBook" laptops are compatible with XP/Vista.
One thing to note is that BootCamp is currently in the beta version (at least until when OS X Leopard comes out), so you may have some minor problems installing and running windows, but they should be fine.
Another thing to note is since Vista craves a lot of CPU, RAM, HD and graphics, I would suggest you going to a MacBook Pro. I have heard that Vista does not run smoothly on computers with less than 2 GB RAM, nor does all of its features render well if you don't have a 128 MB graphics card. Increasing the MacBook's RAM to 2 GB may also significantly increase the performance.
Either way, the option is yours. All of them should work out fine, with perhaps a couple of firmware updates

Subroutine-the actual parameter is incompatible with the formal parameter

Hi,
I have the following code that is outputting an error message during activation:
DATA: I_RESBB TYPE TABLE OF RESBB,
      WA_RESBB TYPE RESBB.
PERFORM OBTAIN_RESBB_DATA
USING I_RESBB.
*&      Form OBTAIN_RESBB_DATA
*       text
*      -->P_I_RESBB text
FORM OBTAIN_RESBB_DATA USING    VALUE(P_I_RESBB) TYPE RESBB.
ENDFORM.                    " OBTAIN_RESBB_DATA
However, I am getting the following messages during activation:
In PERFORM or CALL FUNCTION "OBTAIN_RESBB_DATA", the actual parameter
"I_RESBB" is incompatible with the formal parameter "P_I_RESBB".
What am I doing wrong? I have checked through many different threads & sites but can't find a solution.
Thanks,
John

John, since you seem quite familiar with the ABAP help and obsolete statements I'm now surprised what you were initially asking for.. .
Anyhow, below a sample coding with the table being passed as a USING parameter. Avoid using VALUE on the parameter (i.e. pass by value) unless you need a copy of the parameter. Otherwise this leads to a performance overhead (requirement to copy the parameter), especially for large internal tables.
TYPES T_RESBB_TAB TYPE STANDARD TABLE OF RESBB WITH NON-UNIQUE DEFAULT KEY.
DATA I_RESBB TYPE T_RESBB_TAB.
PERFORM OBTAIN_RESBB_DATA USING I_RESBB.
FORM OBTAIN_RESBB_DATA USING I_RESBB TYPE T_RESBB_TAB.
FIELD-SYMBOLS: <RESBB> TYPE LINE OF T_RESBB_TAB.
LOOP AT I_RESBB ASSIGNING <RESBB>.
    " Additional coding for evaluating/updating the table
ENDLOOP.
ENDFORM.
Cheers, harald
P.S.: Update of my posting: Just read your one comment. Looks like your only problem was attempting to define the table type in the parameters section of the form routine. This doesn't work. If you don't have a type you could use a generic type (i.e. simply just say <i>using i_resbb type table</i>), but in general I would stick to strong typing unless you have a generic routine that must handle different table types. So simply refer to a table type from dictionary or that you defined in your program.

"SOURCE_PACKAGE" is incompatible with "DATA_PACKAGE"

Hi All,
While activating Transformation 2lis_13-vditm I am getting an error
In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
Is there anyone who can solve this problem?
Regards
Amit Srivastava

Hi,
Do you have a similar declaration as below, for Type tys_SC_1_full, in the routine?
TYPES:
      BEGIN OF _ty_s_SC_1_full,
        field1 type c,
        field2 type c,
        field3 type i,
      END   OF _ty_s_SC_1_full.
If Yes, delete or comment all the declarations present in between above BEGIN & END(remove the field1, field2 & field3 declarations).
Now copy all the declarations from the other TYPES tys_SC_1 delcaration and paste here.
In brief the structure of tys_SC_1_full should be exactly same as tys_SC_1.

BIB-16633 Cannot connect because the database version is incompatible with

BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
Reply
why is this?
oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
at oracle.dss.connection.client.Connection.connect(Connection.java:425)
at oracle.dss.connection.client.Connection.connect(Connection.java:342)
at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Lisa Sherriff
Posts: 137
OTN Member Since: Jan, 2001
Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
Reply
Hi,
From the 10.1.2 BI Beans Install Guide it says:
OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
* Oracle9i Release 2 Enterprise Edition, as follows:
o 9.2.0.6 for all platforms.
o 9.2.0.5 with the latest OLAP patch for Windows-only.
* Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
From the error message it would appear that the Database is not one of the above.
Thanks,
Lisa
JDev QA
401488
Posts: 48
OTN Member Since: Aug, 2002
Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
Reply
Hi,
Please note that we have follwing versions of DB up and running:-
1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
Pls let us know the solution to resolve this problem ASAP.
Thanks.

You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
10g - 10.1.0.3 with additional OLAP patch
9i - 9205 with additional OLAP patch
9i - 9206
I would suggest that you have not applied all the required database patches to your instance.
Hope this helps
Business Intelligence Beans Product Management Team
Oraclc Corporation

UDI-00018: Data Pump client is incompatible with database version 11.2.0.1

Hi
I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?

AUTHSTATE=compat
A__z=! LOGNAME
CLASSPATH=/app/oracle/11.2.0/jlib:.
HOME=/home/oracle
LANG=C
LC__FASTMSG=true
LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
LOCPATH=/usr/lib/nls/loc
LOGIN=oracle
LOGNAME=oracle
MAIL=/usr/spool/mail/oracle
MAILMSG=[YOU HAVE NEW MAIL]
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
ODMDIR=/etc/objrepos
ORACLE_BASE=/app/oracle
ORACLE_HOME=/app/oracle/11.2.0
ORACLE_SID=AMT6
ORACLE_TERM=xterm
ORA_NLS33=/app/oracle/11.2.0/nls/data
PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
PS1=nbsud01[$PWD]:($ORACLE_SID)>
PWD=/nbsiar/nbimp
SHELL=/usr/bin/ksh
SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
TERM=xterm
TZ=Europe/London
USER=oracle
_=/usr/bin/env

Is incompatible with

Hi friends,
I am getting the error message:
In PERFORM or CALL FUNCTION "GETATTRIBUTES",
the actual parameter "LT_ATTR_DAT"
is incompatible with
the formal parameter "P_LT_ATTR_DATA".
Please advice what is wrong right here.
Thanks in advance
Sas
DATA: lt_attr_dat TYPE TABLE OF bbpt_attr.
PERFORM getattributes
            TABLES
               lt_attr_dat
            USING
               sy-uname.
FORM getAttributes
       TABLES lt_attr_data type bbpt_attr
       USING lv_user       TYPE sy-uname.
TYPES: BEGIN OF lty_user_attr,
        attr_id          TYPE om_attrib,
        value_logsys TYPE     log_system,
        value            TYPE char30,
       END OF lty_user_attr.
DATA: lt_user_attr TYPE TABLE OF lty_user_attr.
DATA: lt_attr_list TYPE bbpt_attr_list.
DATA: lt_vlist     TYPE bbpt_attr_values.
DATA: ls_attr_list TYPE bbp_attr_list.
DATA: ls_attr_data TYPE bbps_attr.
DATA: ls_user_attr TYPE lty_user_attr.
DATA: ls_vlist     TYPE bbps_attr_values.
DATA: ls_t77omattr TYPE t77omattr.
lv_user = sy-uname.
ls_attr_list-attr_id = 'WRK'.
APPEND ls_attr_list TO lt_attr_list.
* Read Attributes
CALL FUNCTION 'BBP_READ_ATTRIBUTES'
    EXPORTING
      iv_user                 = lv_user
      it_attr_list            = lt_attr_list
    IMPORTING
      et_attr                 = lt_attr_data
    EXCEPTIONS
      object_id_not_found     = 1
      no_attributes_requested = 2
      attributes_read_error   = 3
      OTHERS                  = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform.                    " getAttributes

PERFORM getattributes
            TABLES
               lt_attr_dat[]
            USING
               sy-uname.
FORM getAttributes
       TABLES lt_attr_data STRUCTURE bbpt_attr
       USING lv_user       TYPE sy-uname.
Note : STRUCTURE Is obselete, hence you may define it as
types: tab_type type table of bbpt_attr.
FORM getAttributes
       TABLES lt_attr_data type tab_type
       USING lv_user       TYPE sy-uname.
Regards,
Mohaiyuddin
Edited by: Mohaiyuddin Soniwala on Nov 26, 2008 5:10 PM
Edited by: Mohaiyuddin Soniwala on Nov 26, 2008 5:12 PM

Samsung SW-252F CD-RW is incompatible with MSI K7N2GM-L

Similar Messages

Maybe you are looking for