Samsung tv cam

hi i am looking for samsung tv cam freetalk 1750. ı have samsung c8000 tv. But in skype web site i cant find tv cam. I wanna buy where can i buy ıt?can yıu help me?

Hi.
I'm sorry, but the Samsung camera is currently out of stock from the Skype shop.
The Freetalk camera you mention (actual model number is HD TALK-7180) is the old model from 2010 and is generally no longer available.
However, the Samsung camera STC1100 works with all Skype-enabled Samsung TVs from 2010 and 2011. See Samsung's website for details:
http://www.samsung.com/us/video/tvs-accessories/CY-STC1100/ZA
You can also enter your Samsung TV model number on their site to check if the camera is compatible.
A number of online shops are selling this camera:
http://www.google.com/products/catalog?q=samsung+skype+camera&oe=utf-8&rls=org.mozilla:en-USfficial&...
I hope this helps.

Similar Messages

My Samsung tv came pre-loaded with V-Tunes. I prefer in Tune-In Radio. How can I get it on there?

My samsung tv came pre-loaded with V-Tunes. I prefer Tune-IN Radio which was pre-installed on my other samsung tv which was recently replaced with larger unit without realizing that Tune-In wasn't installed on this new one..... How do I get it installed. It ia not appearing in the Samsung Apps on my screen. Frustrated!!!!!

Go to the page linked below, and there's an option to "check your device". If you click this, you can enter the make and model etc. of your new TV and find out for certain if it is compatible or not.
http://www.samsung.com/us/appstore/app.do?appId=G00004990795#

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

Copy of invoice/receipt - Samsung Digital Camera

All,
My Samsung digital camera has broken and I need the invoice/receipt to be able to have Samsung to fix it here in Brazil.
Can you please help me with that?
Here is some information from my camera:
Brand - Samsung
Model - WB850F
S/N - {Removed per Forum Guidelines}
I bought this camera in Best Buy in Orlando, March 2013.
Thank you
Carlos

Hi Carlos,
Welcome to the Best Buy forum!
Before I can find your receipt and potentially provide a copy, I will need a bit more information about the actual transaction. I am going to send you a private message so that I can gather that information and see what I can do to help. You can check your private messages by logging into the forum and clicking on the yellow envelope icon located at the top of the page.
Warmest Regards,
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

HT2986 I got a Samsung video camera for Christmass. I get error message when trying to down load video. Pictures down load fine. I have a Imac with system 10.5.8 and Imovie 8 (7.1.4). Is it camera problem or something on my end. Any help is appreciat

Got a new video camera for Christmas, Samsung HMX-F80, it down loads pictures just fine, but videos I just can't get it to down load. I was able to down load to my PC part no problem.
MY Imac, System 10.5.8, Imovie 8 (7.1.4). Do I need to upgrade? Or what.
Any help is appreciated.

Is it listed here?
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014

Samsung Integrated Camera not working with Skype

Hi,
I have a Samsung ES7000 series TV with an integrated camera. When using the Skype app, this initially works for approximately 1 minute but then a message appears on the TV saying “Connecting USB Camera and Mic”. This results in getting disconnected from the video call.
I have contacted Samsung on a number of occasions and after performing a number of checks without success to fix the problem, they suggested that this is probably a Skype app issue and I should contact Skype.
Could you please help resolve this issue?
Thanks.

Hi,
I wonder about the message, which is "Connecting USB Camera and Mic".
Did you have a software upgrade for TV?
At that time, did you unplug the power cable by force?
I recommend "please do a upgrade software of TV"
The upgrade is through the Network.
You can see the upgrade button at "Main Menu --> Support --> Software Upgrade --> Online".
IMPORTANT.
After upgrading TV, it will be automatically reboot.
Please, Don't power off until finishing upgrade by force.
I hope your success!!
Thanks.

Skype/Samsung TV Camera - audio and chipmunk/heliu...

As has been posted elsewhere although not that i can find for this specific product, the Samsung TV (Skype certified) camera/mic combo CY-STC1100 has me sounding like a member of Alvin and the Chipmunks. I've used Skype with my computer without an issue - this has to be a software issue however this device is specifically certified for use for my TV (PN59D8000 - Samung Plasma 2011). Thoughts?

Moved.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Samsung ST1000 Camera - Bluetooth Problem

Has anyone managed to pair a Samsung ST1000 with an Imac? My Imac seems to be able to see other devices and works well with my Magic Mouse, but it can't 'find' my camera and the camera can't see either my Imac or my Macbook.
Any suggestions?

I spoke to Samsung today and they weren't terribly useful. They said that they had not heard of anyone else having this problem, and that I should contact Apple to see if their Bluetooth supported OPP.
Can anyone confirm this?

Does anyone know where i can download software for my Samsung NX10 camera for my imac

Im desperate to find the Samsung Camera NX10 software disc for a MAC. I only have a copy for windows and am unable to find any downloads or any help anywhere.
Does someone know where i can get this from??

You really don't need any Samsung software to use that camera with the iMac. See > Mac 101: Connect Your Camera
Just connect the camera up via it's USB cable or by putting it's card into a reader and import the photos to iPhoto or other Mac compatible Photo software.
Dennis

Connecting samsung surveillance cameras to internet airport extreme 7.7.3

i have the samsung sds-v4040 and I'm not able to connect to the internet through the airport extreme 7.7.3
i been trying but I'm not really computer friendly with MAC address or dtp or tcp i seen them but don't know what to do. can some one help me plug the info in the correct places? thank you

To successfully access an IP camera on the local network from the Internet, the following basics need to be taken care of:
Install the camera(s) and verify that you can access them from the local network.
Configure port mapping/forwarding on your router. Typically, IP cameras require at least two ports: 1) A web port for administering the camera; Usually TCP port 80, and 2) A streaming port to broadcast the camera video feed; Usually UDP port 9000. Note: You should check with your camera's documentation for the exact ports required.
If the camera is attached to a computer, you will need to configure the computer's firewall to open the same ports as in step 2 above.
Verify that your modem is in bridge mode, i.e., if the modem provides NAT & DHCP services, turn them off.
Test your network. Use CheckIP to determine your router's current WAN-side (public) IP address. Then, from a remote location (not from a computer on the local network), use the DynDNS Open Port Tool to verify that the required ports are open. Success is an "Open" response from the Tool.
For basics on configuring port mapping/forwarding on your AirPort, please refer to the following AirPort User Tip.

Samsung Fascinate- Camera not working

The camera phone function doesn't work. When software is open and try to take picture, the phone will freeze up or not take picture and will give a "force close" message. Tried new O.S. (2.2 update) nothing works (: HELP!!!!!

This is definitely an issue with your specific phone. I recommend either a hands-on evaluation at the store, where a new device can be ordered for you if necessary, or we can order one for you here at customer service. You can PM me with your wireless number, contact number and a good time to reach you, and I can also send you a device. Finally, you always have the option of reaching us at 1-800/922-0204 from an alternate phone for troubleshooting, and also a replacement if warranted.
Thanks,

Samsung S5 camera images have vertical bars/gradient in them. Has anyone seen this before?

Low light conditions produce vertical bars in the image, see attached.
I downloaded another camera app and it too produces these bars.
It would seem that there is a hardware issue with the sensor.
In outdoor images these are not noticeable but I believe they are still there since as the light increases they get lighter. At some point the gradient simply blends together when there is enough light.
This is my second phone in less than 10 days, it seems getting a fully functional S5 is difficult.

Hello pf1234,
Having a camera on your smartphone that doesn't work is understandably frustrating but we will work to get this issue resolved for you. Are you having the same issue with the front facing camera? Let's try to reset the camera app to see if it resolves the issue http://vz.to/XMEq5K Please let us know how it turns out.
CandiceH_VZW
Follow us on Twitter at @VZWSupport

I have a Samsung Digital camera that has WIFI how can I print pictures from my camera.ith this print

Printing Photos from WIFI camera

Hey Betp!
Sounds like you have a nice camera! Unfortunately, unless the camera has some kind of built in print driver, you wouldn't be able to print from it over Wi-fi. What you would most likely need to do is transfer the photos to your computer and then printer them, or remove the memory card and insert it directly into the printer (assuming it comes with that size slot).
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Echo using Samsung STC3000 camera w/ F6400 Smart T...

The other party to the skype call is hearing an echo of their own voice, but only when I skype from this TV. If I skype from my laptop, then no problem. There are no other audio problems (I can hear them, I don't hear any echo of myself, and they can hear me). I have received the same complaint from two different contacts, and they don't have this problem with any other skype users.
Apparently, the STC3000 is picking up output from the TV speakers, and feeding it back on the skype connection. Samsung chat person ("Daisy") denied any knowledge of any such problem.
Anyone have this problem?
Anyone have a solution?
Thanks

I have finally received the reply below from Samsung. I will post in 2 parts due to it's length. In my case, updating the software and not turning on multiple devices at both ends of the call, cured the echo problem.
You must have a minimum connection speed of about 2Mbps, which is recommended for most apps (when viewing standard definition content), whereas at least 4Mbps is needed for HD (high definition) content, and 8Mbps or more for 3D content. To improve signal speed, try moving the TV and router closer together (a maximum distance of about 10-15 feet is recommended) or try connecting the two via Ethernet LAN cable instead.
If you have multiple devices on your network, share a network or live in an area of high network traffic, we would recommend changing the channel on your wireless router – most routers are defaulted to 1, 6 or 11 as these are the only non interference channels on a 2.4GHz router – by changing this it will different to your neighbours' which will cause less network interference.

My phone was working fine and at the same time the samsung logo came up saying there was a software update, the screen went green with lines and static. Help?

I spent time online chatting with reps from Samsung who tried to get me to do a factory reset even though I'd already told them I couldn't access the screen at all. They ended up suggesting I just send it in for a warranty replacement as the phone was only purchased in the summer. I'd like to see if there are other options? I'm trying Verizon's Software Repair assistant but it seems to be stuck at the 25% downloading mark for quite some time. I'm worried I've killed all my data back up as a result. ANY help would be incredible now.

Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario

Samsung tv cam

Similar Messages

Maybe you are looking for