Samsung wireless adapter

Does anyone know if I can use any wireless adapter on Samsung HDTV to access the internet or do I have to have the Samsung adapter?

Pretty it has to be the samsung adapter. It won't recognize ones that go in your computer.

Similar Messages

Apple TV vs Samsung Wireless adapter

We have an Apple TV working on our current Sony HDTV. Now we are getting a second TV, a Samsung HDTV. Samsung markets the LinkStick Wireless USB 2.0 Adapter for its TV's, and I can get it for a good price on eBay (~$50). I know I won't have access to iTunes' movies and TV shows, but, besides that, are there other advantages to getting a second Apple TV box for this new TV, instead?

Do not waste your money on an Samsung stick as internet TV is crap. Buy an Apple tv. I bought a stick and sold it a few weeks later. You cannot really compare a stick and Apple TV.

Samsung wireless blue ray home theater

i just got a samsung home theater HT - C5500 and I want to know what do I need to use the internet, wireless speakers, and all the features; also I need to know if I can plug my phone to the bluey ray player... its a htc phone

Ok, first of all, in order to use the internet features of the blu ray player, you can go about this two different ways. You can either directly plug an ethernet cable into the back of the blu ray player/home system and access the internet that way, or you can go and purchase the Wireless adapter stick. This stick looks very much like a flash drive that you plug into the back of the player and it picks up on your home wireless signal.
Secondly, in terms of making your speakers wireless there are a couple different options you go with. Samsung sells a device that can make your rear speakers "virtually wireless". What this means is instead of running speaker wire from the home system/blu ray player at the front of your room all the way to the rear of your room, there is a small box that will sit in the back of the room and you run the rear speakers speaker wire into the box. The box then communicates with the home system/blu ray in the front of your room, and you have now saved a lot of wire from being run all around your room. This is the most simple way, but the box is not sold in stores, you will need to order this box directly through Samsung.
The other option in terms of making your speakers wireless is the Rocketfish rocketboost setup. There are many different ways you can go about setting up your speakers so they're wireless and these kits vary depending on how you'd like things done. I'd suggest going and speaking with a Home Theater specialist at Best Buy about this option, they could actually give you demonstrations and a better visual explanation than what I can here.
Finally as for hooking up your HTC phone to the system, there are cables to do so, you just need to purchase the one specific to your model phone. For example, if you'd like to listen to music off your phone, you can purchase a cable that is a headphone jack on one end and a red and white stereo cable on the other end. This way, the headphone jack plugs into your phone and the red and white into the tv or surround sound system if it has the inputs for it (which i dont believe it does). In terms of transmitting video, you will need a specific cable, which I would then again speak to either a Best Buy Mobile associate and/or Home Theater specialist, the combination of the two will be able to point out exactly what kind of cable you will need (I have an iphone and I have it hooked up to my system to watch shows on).
I hope this helped you out and that you can get everything all set now in terms of your new surround sound system!
Ohh and I am a Home Theater specialist for Best Buy if you were wondering and I'm very confident in what I have explained here, hope it helps you out =D

Upgrading my wireless adapter from wireless n-1030 to ultimate-n 6300

Good day!
Is it possible to upgrade my wireless adapter from wireless n-1030 to ultimate-n 6300, my laptop specs are as follows: HP Pavilion DV6-6134TX and the operating system installed Windows 7 64-bit.
This question was solved.
View Solution.

skywalker_08 wrote:
Good day!
Is it possible to upgrade my wireless adapter from wireless n-1030 to ultimate-n 6300, my laptop specs are as follows: HP Pavilion DV6-6134TX and the operating system installed Windows 7 64-bit.
Hi,
Not many laptops support 3 wireless antennas and wireless cards like the Ultimate-N 6300. I have the card myself on Dv6 but it's the 1st generation of the Core i7 processors and also modding the BIOS was necessary to make the card compatible with the laptop. Intel 6150 and 6230 are compatible with the Dv6-6000 Intel based series laptops but the Ultimate-N 6300 not.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Hp 2000-140ca notebook wireless adapter problem

I've had my HP 2000-140ca since about June 2011
Today I woke up to find that my harddrive was fried. I knew this was coming as error messages came up lately, and I had backed up important files in advance. While not the reason I'm posting this, I am extremely disappointed in the length of time the harddrive lasted.
Anyway, since I can't afford to be without the laptop for the length of time it would take to send it away to have it "fixed" under warrenty (basically any amount of time at all) I decided to just buy a new hard drive and deal with it myself.
Hard drive replaced, windows 7 64 installed, many drivers downloaded and also installed. The one problem I seem to have now is that for some reason the wireless driver refuses to install. I've downloaded several different versions as there's a few for this model on the site but nothing seems to work. It just won't detect drivers and when I run the downloaded file it seems to install initially but then fails to do anything. I'm at a loss here and am already suffering the loss of a portable computer.

Do you know what wireless adapter it is?
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Upgrade my DV6-6126sl with an Wireless adapter Bluetooth

Hi,
I open a new topic, because searching among existing ones, I did not find useful answers.
I have a DV6-6126sl and I decided to upgrade it with a wireless card that implements the Bluetooth. analyzing the service and maintenance guide, I chose to buy the part number 657325-001, which should be compatible with both AMD and those models intel, but when I insert the card at startup hangs and does not post bios, giving an error "wireless adapter installed is not supported and then has the error" wireless (702) "," how is it possible? there is a method to unlock it, thanks
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

Today, the seller has sent to me an email that says: "I have the Ralink RT3090BC4 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter 630705-001".
According to you, since the manual is listed as "For use on all computer models:" can I try?
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

Airport extreme connecting with xbox 360 wireless adapter problems...help!!

Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

Just boot camped mid-2012 MBP using Apple's BootCamp 5.1.5621. However, no wireless adapter is listed in device manager

[In Windows 8.1] When I access the Device Manager, it does not list my wireless adapter as one of the devices available. I have attempted to manually install the drivers from the BootCamp 5.1.5621 file.
I've spent several hours attempting to remedy this but have only found threads explaining how to solve the problem if the 802 adapter is already listed in the device manager.

I recently had some BT issue's in Win8 so I wrote a topic about this subject. Maybe you need to replace the Broadcom drivers as well.
Please have a look here:
Apple Wireless Keyboard Windows 8 problem
Good luck.
Marcel

2g Shuffle crashes wireless adapter

Hello,
I'm a dell machine with windows xp and whenever I plug in my new 2g shuffle I get an error message saying windows does not recognize my device and then it crashes my wireless internet connection. I am using a Linksys wireless adapter on my home machine. I moved my machine and hard wired and the shuffle worked like what you expect from all Apple products! I moved it back and reconnected to wireless plugged in the shuffle, same error message, wireless does not work and shuffle is not recognized by windows or itunes.
Any ideas?
Dell Windows XP
Dell Windows XP 1g shuffle, 2g shuffle, 1g mini, 2 5g 60 gig video

After looking at another post I decided to try a powered usb hub, the shuffle works fine, no problems at all with any other devices using the usb ports. The shuffle works like it should, I just don't understand why that makes a difference, do I have a defective shuffle, is it using too much power from the usb port, should I exchange it?
Windows XP

WUSB54G - Wireless Adapter Causing BSOD

Here is one for the support team. I wanted to connect another PC iwas working on to the internet via my WUSB54G wireless adapter. This was a fresh install, but an old computer. At the point in the installation where the adapter is connected to the USB port, Windows keeps shutting down and giving me a blue screen. Any advice?

Did you try to install the adapter drivers and not the software ? If not you should try that...
Make sure you connect the adapter to a different USB Port(don't use the port to which it's already connected)...
Download the adapter drivers from here: http://home.cisco.com/en-us/wireless?referrer=www.linksysbycisco.com
Once you have downloaded the drivers you need to unzip the file...After you unzip the file you should un-install the adapter drivers/software from Programs menu...Connect the adapter to a different USB Port and reboot your computer...Once the computer is rebooted you should see a message "Found new Hardware"...Select the option Install it from a specific location and click Next, then select Include this location in Search and browse to the place where you have unzipped all the files and select the Driver folder and click O.k...Then click Next and it should install the adapter drivers...
NOTE : This installation doesn't install the software(Linksys Monitor)...
Once the Adapter is installed, Click on the Start button >>> Control Panel >>> Network Connections- Right click on the "Wireless Network Connection" icon and select "View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click "Connect". See if this corrects your problem...

Wireless adapter causing blue screen

Hello,About a month ago on my Lenovo Ideapad Z580, I was using the internet when it said I was no longer connected. When I tried troubleshooting, it reset the wireless connection adapter and gave me a blue screen. When it restarted and I tried troubleshootingt it again, it enabled the adapter and worked fine. Since that first time, this BSOD has happened every day, sometimes multiple times a day, but not everytime I am on the internet. I have tried doing a system restore at a few different points, but the restore always ends in an error. I checked at the driver for the wireless adapter is up to date. Please advise on what I can do to fix this problem. Thank you,Stephanie

The symptoms you describe could be symptomatic of a variety of things to include hardware/software issues, overheating caused by a failed processor fan, bad memory (RAM), failing or underpowered power supply, CPU overheating, motherboard, video card, faulty or unsigned device drivers, CMOS battery going bad, BIOS and firmware problems, dirty hardware components, programs hanging or unresponsive in the background, and even malware. If the computer is overheating, it usually begins to shutdown/restart on a more regular basis.
If the machine is only crashing at home after establishing a connection but not at work when establishing a connection, then its probably an issue with your network configuration or something (i.e. wireless adapter) causing a conflict and not a malware issue.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error is usually due to a bad driver or faulty/incompatible hardware or software. This error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high.

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

Hello everybody,
Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points.
I found two work arounds but I don't know how to fix the issue completely.
1. Remove usb adapter and plug it in again (it causes arc4 module to load), then restart networking.
2. rmmod p54usb, rmmod p54common, modprobe arc4, modprobe p54usb and after that restart networking.
Could anybody help to fix the problem generally?
$ lsusb
0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
$ uname -a
Linux arch 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 08:11:41 UTC 2012 i686 Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz GenuineIntel GNU/Linux
Stas

Does the p54common get loaded again as well when you do modprobep54usb?
If not, you might just put that into modprobe.conf blacklist.
If it does get loaded as well, there might be another wireless module getting loaded that perhaps does cause problems. You can check that with
mkinitcpio -v
now, or with lsmod after a reboot before your workaround.

Can I use a USB wireless adapter with my iMac G4 Flat Panel (it has no Airport card).

I have just salvaged an iMac G4 15-inch Flat Panel from the skip and now have it running Mac OS X Tiger 10,4. It has a 700mhz cpu, 80Gb hard drive and 512mb of Ram. No airport card is fitted so I was wondering if a USB wireless adapter could be used instead. I have a Belkin F5D8055ea USB wireless adapter fitted and the system recognises the device, this is as far as I have got as I am a complete novice on Apple/Mac machines. Anyone any ideas please?

If the device is recognised, see if you can located your wi-fi network using Airport Utility.

Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

i have a time warner modem with the ethernet cable plugged into my airport express to create a wireless network in my house. my macbook and dell connect with no prob.
the xb recognizes the airport express, shows it as connected with green bars, but when i try to log into xbox online, it says that there is no connection.
i can plug in the ethernet cable from the xb to the airport ex and there is no problem. only when trying to use the wireless adapter.
how can i stop this? also, how can i find my IP address?
since the xb wouldnt connect and find my ip automatically, i tried to do it manually. when i go to terminal on my macbook and enter "ipconfig e0", i dont see an IP address.
i have seen a lot of info on this but it mainly deals with airport extreme or those who are trying to connect to airport express with an ethernet cable.
so if you can help me troubleshoot the wireless connection between my xb and my airport ex OR explain how i can find my IP address, i would be very grateful.
FYI---the airport express was purchased in april, so i believe it is the new "n" model.
thanks for all your help.

Gary Sanborn, please share your tricks. I'm curious to know how you got it to work. I used to have the old Express and that worked just fine. The new version (n) doesn't seem to connect to xbox live. As previously stated, mine also shows "connected" and a strong green bar signal on the xbox but the text can't get passed "connected to live"... if I'm not mistaken.
I heard about holding down the option button white selected the type of wireless connection and connecting to wireless b only. I would want to avoid this option. I don't want my express to run that slow. Please advice. Thanks in advance.
By the way, I haven't tried it since recently upgrading to OS X 10.5.3. I wasn't sure if that affected airport's connectivity with xbox 360.
Message was edited by: Gino Zevallos

Samsung wireless adapter

Similar Messages

Maybe you are looking for