SAN already in use FCP X
Hi,
Please can some one help? I have just taken a SW update to FCP X and now my projects are not loading and I get an error saying SAN already in use... Is there anyway around this?
Thanks...
/John
I would trash the FCPX preferences and setup the SAN details after that again.
Digital rebellion have a free tool for manageing Preferences you can get it here http://www.digitalrebellion.com/prefman/
Jim
Similar Messages
-
Hi everyone. I just today got the message "The selected SAN location is already in use." Has anyone recieved this message before? If so, how can I fix this?
Thanks!Welll I don't see fast how to edit my reply. (the projects and events on external drives show up, but there is a error when FCP-X started up with the message that the "home folder user" is in use
and can not be used by SAN becase of the same name????)
First I did use Preference Manager 3.2 to trash the preference but that did not solve my problem.
Then I repaired permissions. I did not solve the problem.
Waht solve dthe problem is next.
I started my MacBook Pro is safe mode (shift power on) Then I repaired permissions.
Then I copied the Final Cut Events en Projects folders from my home folder Movies to a external dive (in a folder so that with start up it did not show up in. (And trashed the project and event folder in my movies folder)
I restarted the Mac Removed again the Preference.
Then I restarted FCP-X and it started up without a problem.
Then I copied the content of my old folders to the new folders in my movies home folder. (not just the folders Final Cut Events/Projects)
Now it is working correctly. -
I keep getting this message when I try to open FCP X. "The storage location 'brianmassman1' on this computer is already in use by 'brianmassman1' on 'Brian-Massmans-Computer-7". To access the location, quite Final Cut Pro on 'Brian-Massmans-Computer-7' or remove the location."
I have no idea what this means. Particularly the part about "Brian-Massmans-Computer-7." I don't even know what computer that is.
I'm guessing it could have something to do with the fact that I've still got FCP 5 installed. But it's not running.Try repairing permission in the Disk Utility and rebooting,
-
Hi,
I have problem with installation Final cut pro x (trial version)
When I installed and launch, it write me this:
The selected SAN location is already in use. The storage location "RAAF" on this computer is already in use by "RAAF" on "Pavels-MacBook-Pro". To access the location, quit Final Cut Pro on "Pavels-MacBook-Pro" or remove the location.
What I must do?
Thanks so much for you tips
PaulTry repairing permission in the Disk Utility and rebooting,
-
When I open FCPX, it tells me, "The selected SAN location is already in use," and then quits.
I use Final Cut Pro recreationally mostly, but I got hired for a project by chance. I don't use any external hard drives, just my disk. I have an Apple Time Capsule for backups. Suddenly I got an error message when I open it "The selected SAN location is already in use." The subscript reads, "The storage location "newtonfamily" on this computer is already in use by "newtonfamily" on "Newton-Familys-iMac". To access the location, quit Final Cut Pro on "/Users/newtonfamily/Movies/" or remove the location," and has only an okay button, which quits FCPX when you choose it. None of my stuff loads in the project panel or event library. What do I do to get it back.
Try repairing permission in the Disk Utility and rebooting,
-
Initially while working on two projects I began to run out of disk space on the external hard drive. Soon I was given this message:"The selected SAN location is already in use" To try and remedy the situation I decided to move one project to another harddrive that I use for another project. Initially it then showed nothing(projects and events) on either harddrive after that. Now FCX won't even boot up at all. Please help. I'm approching deadlines on all of these projects.
Thank you for any advise.RE : "The selected SAN location is already in use"
I spent 2 hours with Apple technical support and even did a remote session as they looked at my desk top live.
1st the bad news, there is no real solution nor is there an answer as to why this happens. The SAN is supposed to only work through fiber optics and is strictly designed for multiple users accessing the same drives … It should only be activated manually and only through fiber optics . No one at Apple could understand why this is happening, why did my thunderbolt disk appear to be on a SAN and unexplainably unable to be accessed by my computer because it was being accessed by my computer. A conundrum indeed
The semi good news is that I was able to open the original session eventually.
Here is the workaround… And it ain't pretty .
If you can access the disk on the desktop copy the whole content of the disk to another drive , this is because you will have to reformat the drive which is giving you the problems.
Format the original problematic drive and after you have cleared all of the user preferences for Final Cut X relaunch Final Cut.
Final Cut should now see the drive without any of the SAN issues.
Start a new event on the original reformatted drive and give it a somewhat generic name so as not to confuse it with the original event that went bad.
Reimport into this new fresh event all of the original media ( video/audio/graphic ) files and copy them to the reformatted drive.
Do not start a new project related to this new event
Shutdown Final Cut X
Now go to the drive in which you have copied all of your original files and copy the original problematic Final Cut Projects folder right next to the Final Cut Events folder at the root level of the newly formatted drive.
The new drive should only have 2 folders in it now, one is the new Final Cut Events folder that you created by copying over all of original media and the 2nd one should be the Final Cut Projects folder which you just copied back from the backup drive.
I only had to copy the one project which started giving me problems with the SAN issue, because it was the only FCX on my drive at the time therefore I kept intact the original Final Cut folder hierarchy, theoretically even if you have many different projects inside that Final Cut Projects folder it should work, but if that doesn't work try only copying the problematic Final Cut Project.
Start Final Cut again and it should read everything except that the media will be off-line ( unlinked ) and you should be able to re-link all of the media if the files had not change names somewhere along the process.
The one caveat about this is that my edits were off against the music. It almost seems like there was some kind of format issue. Something was lost in translation . My project was only 2 min. long and it had about 50 edits. The 1st three edits were completely off after that it was hard to tell ,some would be on some would be off.
Now I was going on about 2 hours of sleep so i am a bit blurry but what I am certain is that the 1st few edits were 100% off by at least 60 frames.
Again this may have just worked in my instance and it may not be applicable every time this problem pops up.
BTW whenever I connected an older drive everything worked fine there were no SAN issues.
I am on an iMac 27 inch mid 2011, 3.4 GHz Intel core i7 with 16 GB of RAM
running Mac OS X version 10.7.4
and Final Cut X 10.0.4 and
my drive is a Western Digital my book thunderbolt Duo 4 TB formatted in RAID 0
as a final note I tried everything I read on every forum before calling Apple.
Hope this helps someone
Giorgio
new root level drive look -
Photoshop CS3 error saving files - Could not save ... because the fileis already in use or was left
I have a problem with Adobe Photoshop CS3 that only started happening last night. Heres a description of the problem.
When I try and save a Photoshop file, I get the following error message:-
Could not save (filename). because the file is already in use or was left open
I have rebooted my computer, rebooted our server, un-installed & reinstalled Photoshop and also done a system restore, and I still have the problem. (The system restore actually caused huge problems I got the error message The licensing subsystem has failed catastrophically. You must reinstall or call customer support, except I wasnt able to reinstall or uninstall the product. The computer just would not run the installer. I had to undo the system restore.)
I can do Save For Web with no trouble and I can save files to the same location with every other Adobe product installed in the Web bundle, just not Photoshop.
We have 2 machines here with an identical set up (hardware and software) and the problem is only on one machine.
Even though Photoshop says it cant save the file, its actually saving the file in the following format:-
~psX.tmp where X is a random variable, either characters or numbers.
I have to manually open My Documents and rename the file to filename.psd so I can access it again.
Short of reformatting my computer (which Im not keen on doing because it will mean several wasted work hours and I will have to pay our IT people to come in and hook me back up to our network), how can this problem be fixed?
I have also Googled the problem and the only help I found was a suggestion to search for a psicon.dll file and rename it. This file does not appear anywhere on my system, so I'm at a loss.
I have contacted support about this issue, but thought it was also worth while to ask here at the same time.I'm having similar problems with not being able to save files after editing them (and giving them a new file-name, obviously) in Photoshop Elements 4.0. I get an error message saying (for instance): "Could not save as (whatever I'm trying to name the file) because the file is already in use or was left open". Then I see a .tmp file (that I can't open)
I did a search and found that the file was being saved twice, once within Photoshop (where I'm working with it) and also in..
"C:\Documents and Settings\Owner\My Documents\My Pictures\Temporary"
I'm assuming this is the problem, but if you have any clue as to why is this happening and what I can do about it, I'd welcome any input. I've been using PSE-4.0 for years, and this problem just started cropping up. The only (cumbersome) way around this problem has been to just make my edits (in PSE-4.0) and do a "save" under the original file name, then go into explorer and rename the file. So, in short, I cannot do what I've been doing for years, editing a picture and saving it (renamed) in the sane folder (or a different one).
I can "see" the .tmp files in PSE-4.0, but they won't open.. but they will in JASC.. odd..
Thanks-
Bob -
File is already in use or left open
This is a terrible speed bump in an otherwise dandy workflow between Photoshop, Motion & FCP. (FCP Studio2 & PSHOP CS)
When I need to update a Pshop file that is already placed in an open FCP timeline, it's no problem. The file saves, & the FCP timeline automatically updates.
However, when I have the same Photoshop file referenced within a Motion doc, I can't update & save it in Photoshop without quitting BOTH motion AND FCP. Yargh.
I'd like to strangle this little message: "Could not save (file name) because the file is already in use or left open."
Anyone come up with a workaround for this? Does anyone else even run into this?
-RichI think it's not done better because changing original Photoshop file later is always little bit risky if you don't know what you're doing. You know layer position and order is only respected first time when you bring Photoshop file to Motion. So if you later move layers in Photoshop it won't get updated in Motion. And it's impossible to add layers later to your Photoshop file and get those appear in Motion. Changing layer order in Photoshop messes things up even more in Motion.
Anyway I've found best way of working for me is to save Photoshop files with incremental numbers and then in Motion -> Media Inspector -> Replace Media File with the new one. I think it's even smart way of working because like I said before it's quite easy to mess up your Photoshop file when working with Motion. -
Capturing Issues using FCP 7 and Sony HVRZ7U
I am using FCP 7.0.3
On a Mac Book Pro OS 10.5.8
With 2.33 Ghz Intel Core 2 duo processor
I am capturing HD tapes to a WD 2TB external drive.
I am using the Sony HVRZ7U as my playback deck All HD footage was shot on Sony HVRZ7U and Sony HDRFX1.
I have my capture settings set to HDV apple pro res 4222
A. I have noticed that FCP is not capturing in “real time” is this due to the hi res capturing setting? and do I need to let FCP finish process footage even though tape is done with capture? (This usualy adds another 20mins per 1 hr off footage) Is there something I can do to maintain high quality and not have to wait for FCP to be behind capture?
B. Having already gone through aprox 20+ tapes I have come across a few tapes that wont capture? is this due to the fact that not all tapes came from the same camera source? or is it perhaps a bad tape? or something in FCP that went buggy? i tried the usual dumping my preference files, but still fcp keeps frezzing on the capture and then not saving any of the file. I tired to capture smaller portions of tape but still no mater where on tape I try to capture I get same problemA. Yes and yes. Only by increasing the speed of the processor.
B. Maybe because of the different camera types, what cameras are they? It could be a bad tape. Can you view it playing back in your camera? -
Error on start up: The selected location is already in use
I just installed Final cut pro X on my 13" macbook pro with retina display.
When I launch FCP X it is gving me the follwing error message: The selected location is already in use "The storage location "xyz" on this computer is already in use by "(null)" on "(null)". To access the location, quit Final Cut Pro on "(null)" or remove the location"
Where "xyz" is the name of my home folder.
I tried repairing the disk using disk utility and restarted the computer multiple times. But this did not resolve the issue.aludnakvissu wrote:
This is the screenshot of my movies folder
… and no other external drive is connected to my computer.
it is:
your files are on Google Drive ... which is very external ... -
My current Apple ID, for which all of my content has been downoaded (e.g., music, apps) is associated with a work email address that I will no longer have access to in the near future. In my Apple ID account, I noticed I had two alternate emails listed, one is my .me account and the other is my .gmail account. I use my .gmail account, and it is the primary email I use with friends and family. I noticed both were not verified, and when I tried to, it said they were both associated with other accounts. I was able to log into a separate Apple ID account I must have set up at tone point with my .gmail, and I changed the email address to a new one I created. I also deleted the gmail account from any other Apple-relted account I could think of. I am still gettgin the same error message when I try to add it to my current Apple ID: "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
My concern is this: with FaceTime and now iMessage, it seems more important than ever that I am able to use my correct email address. With iOS5 beta, I cannot enter either my .gmail or.me accounts under "You can be reached for messages at:" as I get an error stating: Unable to verify email because it is already in use."
How can I remedy this issue and assign my .gmail account to my Apple ID?Re: Cant verify Apple ID
created by kelly218 in iTunes Store - View the full discussion
I just spoke with a technician at Apple. I hsven't been able to verify because the wife has the phone. but he said all that you need to do is:
1) Go to Settings --> iTunes Store and login with your Apple ID and pwd
2) Go to Settings --> iCloud and login with your Apple ID and pwd
seems that the phone requires you to login to the store first... -
Photoshop CS4 "Could not save as...because file is already in use or was left open"
I have been using Photoshop for years, and CS4 for about a year now. I have never had this error message pop up until this week. It started happening right after I did the Adobe update to 11.0.2. Everytime I try to save a PSD or JPG file now (which are the only two types of files I work with), I get this message preventing me from being able to save;
"Could not save as... because file is already in use or was left open."
I have to attempt to Save as about a dozen times before it will finally save the file. Any suggestions on what could be wrong and how to remedy it? Is it the update that caused this problem?Turn off Caching of Thumbnails in Hidden thumbs.db Files
People sometimes report that they cannot manipulate their folders as they want to because Explorer has a thumbs.db file open. Windows 7 apparently generates these files for compatibility with older software that may expect such files to exist in folders with, for example, photos in them.
The good news is that (with Windows 7 Professional and above) you can disable this through the Group Policy editor:
Click the Start orb
Enter gpedit.msc in the search box and hit Enter.
Expand User Configuration - Administrative Templates - Windows Components.
Click on Windows Explorer.
Right-click the entry "Turn off the caching of thumbnails in hidden thumbs.db files" and choose Edit.
Enable the setting.
-Noel -
Remote Voice Over Workflows using FCP - thoughts?
I am going to try and keep this as simple as possible.
I am Producer and host for an Australian Drag Racing Show that we air nationally...
We record these shows in Full 1080 HD using modern XFILE systems (EVS) using the Apple ProRes 422 (HQ) codec.
Our ENG/EFP team use XDCAM (full 1080i HD).
We edit these shows using FCP 7 amongst a few suites.
I also do some offline content on my 17inch i7 MBP using FCP too.
My question is thus:
The Post Production Team are based in Sydney on the east coast, whilst I am based in Western Australia - this is like being in LA in comparison to New York!
I want to reduce my travel commitment by air, as in the past I have travelled weekly to commentate these shows (40+ shows a year!)
I have - as does the production house - a reasonably good ADSL Internet connection.
I do a lot of Producing and program checks using iChat Theatre within FCP 7. It is quite good.
What I want to get to though is a way in being able to more often commentate these shows remotely from home, without the need for me to physically having to be across country on every occasion - for my sanity's sake.
My co-commentator also lives near me, however our editors are all based across country, together in Sydney.
I see the following options as being the way to do this:
OPTION 1.
When we ingest (log and transfer) the vision, I will always be in Sydney at that time. There are usually several shows generated from this vision.
I copy the Quicktime MOV files that are for use in the shows to my external (eSATA) HD.
Editors in Sydney cut the racing components of our show. They then email me the FCP project file.
(I have FCP, the required Audio and Mics)
Then, I open this FCP Project File and re-link and re-render as required once I receive this and we commentate the shows using the VO utility within Final Cut.
I then do an Audio export only and send the editors the updated FCP Project file, for them to receive and re-link the vision as required, sound mix and print.
OPTION 2.
The Editors cut the shows, then export either within FCP or Compressor a reduced quality file size to send via FTP or sendspace.
I then import this vision locally into FCP, render the vision and commentate it accordingly and just send back the audio.
SO:
What would you all suggest as the easiest and best way to do this. We do have tight work timeframes in terms of getting content to air.
I think Option1 is by far the best, and what I am not sure about is if I did Option2 - what settings for export and I want to avoid bogging down the editors on handling cumbersome vision exports anyway?
Thoughts?
Dean...I would probably go with option 2, myself - I usually export my cuts and run the movie thru compressor with the H.264 LAN or H.264 800KBPS presets. These are found under Apple/Other Workflows/Web/Streaming/Quicktime 7/
These take up roughly 10MB per minute and 5MB per minute respectively.
While I have used Option 1 (duplicate media, transferring a project file), this can get problematic when the editors have generated media - like effects, color correction, etc...
my 2¢
Patrick -
I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?
.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH -
I'm trying to Sync Firefox between my new Android phone with my Macbook Air. It tells me I need to create an account, but says my email address is already in use. So I try to put in the codes in the three boxes, and it leads me back to set up a new account. How can I reset this? How do I proceed?
Thank you for your help!Reset your password
*https://account.services.mozilla.com/forgot
*https://support.mozilla.org/en-US/kb/ive-lost-my-firefox-sync-account-information
How do I manage my Firefox Sync account?
*https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account
Maybe you are looking for
-
since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.
-
Reinstall zones (solaris 8 container)
Hi I have to restore 2 zones, because originally the zones are stored on a ZFS filesystem i've did the backup with the zfsdump scripts. I'm able to restore the ZFS filesystems but that leaves me with the problem of reconfiguring the zones. how do i c
-
My brand new nokia Lumia 620 phone start hanging now its from 30 days of purchase Download many apps that's why????????
-
HI, We have created a order in CRM and have s able to change the shipt to party. ship to party at header and item different,but we are getting error and not ab.le change ship toparty,is there any way we can change shitparty. Your advice.
-
Workbook precalculation service for 2004s
Anyone have a link to Workbook precalculation service for 2004s download. I found a link in SAP Marketplace for BW 3.5 but not for BI. Is there a separate download for BI or can I use the one for BW 3.5?