SAN reboot for oracle DB at ASM in linux RAC
Hi Experts,
we use 10.2.0.4 database in ASM at oracle RAC in red hat 5 linux.
we use 3 directoey ( asm, crs, and database)
I got notes that SAN box (support SAM in database) will be reboot.
Under this condition, what do i need to do? shutdown instance? database? crs? or asm instance?
Thanks for your help?
JIM
user589812 wrote:
what means is about start all oracle related services in sequence?CRS will start the complete Oracle cluster s/w cluster for you - ASM, RAC, nodeapps, etc.
Usually, the only effort required is simply hitting the reset/power on button - as the o/s will boot, CRS will start and it will in turn bring up the s/w stack. No manual intervention required. (unless you on purpose configured it differently)
Based on Billy suggestion, can I use srvctl stop nodeapps -n all and #ORA_CRS_HOME/bin/crsctl stop crsNo - my suggestion is that before the SAN maintenance window period start, you do a "+shutdown -h now+" on all cluster nodes to halt/powerdown each and every RAC server.
And after the SAN maintenance period is over, and the SAN available again, ssh into the LoM (Lights Out Management) console of each server and do a "+start SYS+" (or equivalent) to powerup the server.
In other words, with the SAN down/busy rebooting/undergoing maintenance, I would not want to have my RAC servers up and running as there is no storage layer to run them on. IMO, it is a lot safer to have these servers powered down to during such a maintenance period.
PS. I have even had the odd case that during SAN maintenance power cables being pulled, Interconnect switches accidentally reset and so on - or you could have some bright spark also shutting down the aircon with the SAN and your RAC servers suffering heat problems and potential damage while running. So my question is - why should I take the risk of keeping my RAC servers up when the storage layer is not there and the cluster is broken and useless? Surely it makes a lot more sense to power down those servers too and then only power them on again when the maintenance period is over and the SAN (and data centre) is in a proper running state again.
Similar Messages
-
CPU Requirements for Oracle 10G Rel2 on RH Linux 3 (Linux x86)
Hi,
Can anyone tell me how to decide on the CPU (Speend and no. of CPUs) for Oracle 10G Rel2 on RH Linux 3 (Linux x86)?
Thanks in Advance.
Prachithe more , the better
-
For oracle database and websphere on LINUX
Hi
All,
I have installled Oracle database 10.2.0.3 on AIX server and Application will be hosted on websphere on LINUX.
Now I don't know what are the things require to connect with oracle database from websphere application on LINUX.. for example .. connection string , driver etc..
any help will be appreciated.
Thanks,
VishalAlready answered at the dup post --> Re: For Oracle Database and WEbsphere
~ Madrid
http://hrivera99.blogspot.com -
How to create redlog and control file at ASM in linux RAC
Hi Experts,
I will to maintance a oracle 10g database at ASM as RAC iin linux red hat.
i am a new person with some question.
nornally speaking, oracle recommadition for oracle 10g database as
create 3 copy fills for control file
create at least 2 redo log with mirror files in system.
However, I checked find
redlog file is at FRA place +FLSdisk1 and no mirror
control file is at FRA place--+FLSDISK1/
datebase file at ‘+DATA1/
There are no mirror for relog.
Go to EM, I also could not find place to enter file name.
We use ASM to hold database to support RAC.
Do i need to create redlog file as
ALTER DATABASE ADD LOGFILE GROUP 1 ('+FLSdisk1/sale/onlinelog/REDO01.LOG','+FLSdisk1/sale/onlinelog/REDO01_mirror.LOG') SIZE 1000M reuse;
my boss told me that ASM is reliable.
Do you need to creat more directory to arrange redlog and control files in ASM for RAC system?
FRA is a good place to store control file and redlog file ?
Thanks
JIM
Edited by: user589812 on Jul 3, 2009 3:03 PMASM is reliable but a smart DBA is very careful. If ASM is doing mirroring this is like RAID doing mirroring. What happens if you accidentally delete one copy ... the other one disappears instantly. Not a good idea.
With respect to redo logs you need a minimum of three groups, two members, and one thread per instance. So a 2 node cluster should, at a minimum have 12 physical files.
Not mirroring the redo logs, assuming multiple members, is not as critical. -
No GUI after reboot for Oracle Linux 6 installation
I am trying to resolve an Oracle Linux 6.2 (64 bit) installation issue. I selected Oracle Linux server default setup and after the reboot, the X-Window or KDE GUI graphical
interface does not come up. Instead, I get a command line prompt. Any idea how to resolve this issue to get an Oracle Linux 6 installation with graphical interface?875554 wrote:
I am trying to resolve an Oracle Linux 6.2 (64 bit) installation issue. I selected Oracle Linux server default setup and after the reboot, the X-Window or KDE GUI graphical
interface does not come up. There is no GUI by default on Oracle Linux 6, you need to specifically select one during install. There are PLENTY of topics about this, so perhaps try searching for an issue first, next time? -
ASM lib for Oracle 11g on Red hat linux 4
Hi,
I am not able to find the ASMlib RPMs for Linux 4.
Please let me know from where i can get the ASMlib RPMs for Linux 4
Do let me know if you need any additional information.
linux 4 kernel version "2.6.9-22.EL i686"
Thanks,
Abhay.Hi;
Please see below links:
http://www.oracle.com/technetwork/topics/linux/asmlib/index-101839.html
http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
http://oss.oracle.com/projects/oracleasm/
Regard
Helios -
OCI Driver for oracle 8.1.5 under Linux OS?
Hello *,
Can somebody help me with a JDBC (level 2/OCI) Driver for Linux
(Suse7.1) running a 1.3 JavaVM from Sun?
Many thanx in advanceThe Oracle ODBC driver is a Windows-only product. It won't install on a UNIX machine.
Justin -
Jre for oracle 8.1.5 on LINUX 6.2
I have strange problem in jre installation ( the tar file is jre_1.1.6-v5-glibc-x86.tar.gz)bfore oracle installation. it gives me an error : "/bin/i686/green_threads/jre :error nloading the shared libraries libXpm.so.4 cannot open shared object file : No such file or directory"
Is it bcoz my X server is not installed ??? Is there any work around other than with out bringing my Xserver...
pls help me
Thanks
Sam
nullYou simply have to find that library and copy it to /usr/X11R6/lib . I installed everything related to X and then found libXpm* in /usr/i486-linux-libc5/lib .
Best of lick. -
Oracle Patch for Oracle 8.0.5 on LINUX 6.2
Hello, all
Anybody out there know how get or download a copy of above patch?
Thanks in advance.
nullYou simply have to find that library and copy it to /usr/X11R6/lib . I installed everything related to X and then found libXpm* in /usr/i486-linux-libc5/lib .
Best of lick. -
How to add other 2 control files at ASM in linux RAC
Hi Experts,
I am new for RAC .
the vendor build a RAC for us. I found there are only one control file in system.
we use oracle 10.2.0.4 at ASM with RAC in redhat linux 5.
how to add 2 additional control file to ASM for RAC ?
Please provide a procedur in detail.
Thanks
JimHi damorgan & Friends,
I could not find some infomration to add control into ASM . I can do this job( see below procedure) in no ASM .
My question, our database locates at ASM and control file with a system auto-number ( fully qualified filename ) as
+DATA1/SALE/controlfile/current.256.690290159
How do I physical copy and rename other 2 contril file in directory and modify location in pfile?
I saw some paper to use request as an alias (such as +dgroup2/control/ctl.f). i can not image to copy/rename control.
Please help me!!
Thanks
Jim
========added control file for no ASM database and works=====================
1)
SQL> create pfile from spfile;
File created.
2)
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL
3)
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
4) modify pfile add additional control file2/3 as
control_files='C:\Oradata\ORCL\control01.ctl','C:\Oradata\ORCL\control02.ctl','C:\Oradata\ORCL\control03.ctl'
and physical copy control01.ctl and raname as control02.ctl,control03.ctl
5)
SQL> startup pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.er database mount;
6)
SQL> Create spfile from pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
File created.
7) check control file info under pfile environment
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L
8)SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
9) startup as spfile environment.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.
10) check control info for spfile environment
SQL> show parameter spfile
NAME TYPE VALUE
spfile string C:\ORACLE\PRODUCT\10.2.0\DB_2\
DATABASE\SPFILEORCL.ORA
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L -
Error message with install of Oracle 9.2 on Mandrake Linux 9.0
Hi,
I hope somebody can help with this. I'm getting an error message during the installation for oracle 9.2 on mandrake linux 9. An error get thrown saying the IP address of a host cannot be determined.
Here is what is in the log:
*** Database Configuration Page***
TitleLabel = Database Configuration
Prompt = Select a database suited to your needs.
ConfigList = General Purpose,Installs a pre-configured database optimized for general purpose usage,Transaction Processing,Installs a pre-configured database optimized for transaction processing,Data Warehouse,Installs a pre-configured database optimized for data warehousing,Customized,Allows you to create a customized database. This option takes longer than the pre-configured options,Software Only,Installs software only and does not create a database at this time,
Selection = s_cfgtyperet = General Purpose
Setting value of s_dbcaProgressOnly to -progress_only
Setting value of b_autoStartApache to true
Setting value of b_launchNETCA to true
Calling query netQueries2.2.0.7.0 getHostIPAddress
Query Exception: UnknownHostException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
Anyone know how to resolve this error and whether or not it is very critical to the oracle installation?
Cheers
JohnnyHi johnny,
You should first check the hosts file to see if the correct hostname and the IP address are shown. You can also check if the "hostname" command returns the correct result. If everything looks good so far, then next check if command "nslookup" returns the correct IP address. If the nslookup <hostname> command returns error, you will need to talk to the Domain Name Server (DNS) administrator to correct this network configuration problem.
Yogi -
Installing Oracle Database with ASM on Oracle VM for SPARC
We're installing Solaris 11 and Oracle VM for SPARC so we can install Oracle Database with ASM. There is a requirement when creating the database that the raw disk have an owner that is the same as the database. Everytime we try to change the owner it will always show that the owner is root.
Any ideas?Hi
Please let me know from where you are allocating ASM raw disks for the guest domain.
i hope you are changing the disk permissions using chown -R
Also confirm the permission using command # ls -IL /dev/rdsk
Regards
AB -
Configure ASM for oracle Grid installation
Hi,
I do not know how to configure ASM for oracle grid infrastructure. As i tried to install oracle grid infrastructure says [INS - 30507] Empty ASM disk group.
I have to configure Asm before installing 11g R2. Please let me know what i have to do and provide the steps to configure and administer asm.
Thanks in advance.http://docs.oracle.com/cd/E11882_01/install.112/e24660.pdf
ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox -
A non-RAC question for the experts: Clusterware + ASM
Hi
We have a 2-nodes cluster in production.
It's an active/passive cluster with a cold failover using SUN Cluster.
There is only one Oracle 10G single-instance database (DB1), running on node #1, that use ASM to access the SAN (it's raw devices).
We want to add a third nodes to move to a 3-nodes cluster, that would have 2 separates single instance Oracle 10g database
node #1: DB1 with ASM (the existing database, existing raw devices)
node #2: cluster passive node
node #3: DB2 with ASM (new additional database, new raw devices)
All nodes are connected to the same SAN.
We' want to use Clusterware instead of SUN Cluster.
The single-instance databases, the listeners and the ASM instances would be protected by Clusterware using "application VIP" (not oracle-vip).
It's not RAC ! but in the future both database might become RAC (but that's not the need today)...
My concern is about ASM !
Do I have to install an ASM instance on each node (just like in RAC) ?
Or may I just configure clusterware to ensure there is only ASM instance running on a node ?
Is it possible to have the ASM instance of node #1 and the ASM intance of node#2 that access the same SAN & raw devices ?
In the case DB1 & DB2 fail over to node#2, the unique ASM instance must see the raw devices of both databases, is this possible ?
Do I have to destroy the curent ASM configuration of DB1 to build the new one, or can I just add new raw devices and share tem across all nodes ?
Thanks for your answers.Hi,
Thanks for the answer
I found this very interesting doucument but it does not go into enough details about ASM, which is my concern.
I found in the Oracle 11g documentation a statement which say that clustered ASM instances for single instance database do not need to talk each other as long as they do not handle the same diskgroup (Figure 1.3 ; http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asmcon.htm#i1021337) . Otherwise, it must be clustered. It would also be a problem for me when DB1 and DB2 are on the same node. I would need two different ASM instance, on the same node, which is not a good situation.
What happen when I start an ASM instance on node #3 to access raw devices already in use by node # 2.
I think I need to start from node #1 and change some ASM configuratoion to make it cluster-aware.
Next, I would add a second clustered ASM instance on node #2, and so on, to make sure that all ASM instances of all nodes can access the same diskgroup, and thefore being able to re-use the existing database on node #1 as well as creating a new one one node #2 (all on the same SAN) -
Using ZFS for Oracle RAC 11gR2 binaries
Hi,
We have following scenario,
Two Node Cluster: Oracle RAC 11Gr2 with Clusterware on Solaris 10
We want to keep Oracle & Clusterware binaries on ZFS mirror file system on each node locally and for Data files, FRA, Voting disks & OCR on shared SAN using ASM.
My question, is the above scenario certified by Oracle or can we keep Oracle binaries on ZFS...?
Will appreciate your input.
ThanksWell my confusion started after reading this doc on oracle support:
Certification of Zeta File System (Zfs) On Solaris 10 for Oracle RDBMS [ID 403202.1]
"Oracle database 10gR2 (10.2.0.3 and higher patches), 11gR1 (11.1.0.6 and higher patches) and 11gR2 (11.2.0.1 and higher patches) are certified with Solaris 10 ZFS on Sparc 64-bit and Solaris x84-64. See Solaris ZFS_Best_Practices_Guide. This is for single instance ONLY. ZFS is currently not applicable to RAC and not Certified to use it as a shared filesystem."
Maybe you are looking for
-
How to get rid of an image which is stuck to the background of the phone screen.
while i was watching a youtube motions suddenly all stopped and the picture stuck hindering all the operation such as phoning or checking the addresses.........how can i do?
-
WBS rearrangement and budget issues
We have implemented PS in our system for the last 6 years. We use mainly WBSs and PMorders attached to them. We tried to use IM in the past but we were not very mature for it. We have now many projects in the system with multiple roots, due to a syst
-
Selection screen in program RLLQ0200
Hi all. I am trying to launch RLLQ0200 for movement 411K to transer material in consigment into own. I want to transfer the stock in storage type 100 and bin PROD. Once the data is selected I can display some materials but some of them can not be sel
-
How adjust iphoto in imovie project?
I dragged my iPhotos into the imovie project. They all last 4 seconds. How to adjust the seconds? THANKS FOR HELPING ME OUT! Frank
-
Instellation has several errors and 2 warnings?
Some errors were DF012, Df024, ans warning Df029 and DF054. I tried to use my Photoshop Cs6 and found some files were missing, so I uninstalled it and re installed it. The Error message comes up again. I dont really know what to do . Is this a proble