Sanction Party List [SAP GTS] Reporting & HANA on SAP BW

Dear All,
Since our company will be installing HANA in our BW environment, does anyone know if Santioned Party List Screening Analysis related to SAP GTS will be available after the install in BW OR does HANA need to be installed within SAP GTS environment to gain access to this reporting?
I've read the following information, see below links, and I'm hoping it's not the later.  Any guidance is always appreciated.  Thank you.
Sanctioned Party List Screening Analysis - SAP HANA Live for SAP GTS - SAP Library
Release Notes for SAP HANA Live for SAP Business Suite 1.0, Q3/2 - SAP Library

Hi Claire,
If the sanctioned party list screening reports need to be displayed GTS server needs to be added on HANA studio. Basis can do the Initial setting and all the table related data will be moved as schema into HANA and reports will be available .No further installation of HANA is required.
Thank you
Karthi

Similar Messages

  • GTS with BW on HANA = Sanctioned Party List Reporting

    Dear All,
    Since our company will be installing HANA in our BW environment, does anyone know if Santioned Party List Screening Analysis related to SAP GTS will be available after the install in BW OR does HANA need to be installed within SAP GTS environment to gain access to this reporting?
    I've read the following information, see below links, and I'm hoping it's not the later.  Any guidance is always appreciated.  Thank you.
    Sanctioned Party List Screening Analysis - SAP HANA Live for SAP GTS - SAP Library
    Release Notes for SAP HANA Live for SAP Business Suite 1.0, Q3/2 - SAP Library
    Please note that I did received a prompt response from SCN participant mentioning that GTS has to be on HANA too.  I'm looking for additional readings and guidance on 'activating' SPL reporting using the HANA functionality.
    Sincerely,
    Claire

    Hi Claire,
    First "Sanctioned Party List Screening Analysis" is VDM not reporting.
    You could use tools like crystal report or Lumira to generate report.
    Considering installation, you first need to install HANA DB including HANA Live content.
    I think you are talking about side-by-side approach which means (GTS is one system using non-HANA DB and BW is another system using HANA). Then you need to replicate tables according to note 1780655 to your BW system.
    Best regards,
    Vincent

  • While creating sales order I am getting  Sanctioned party list blocked  but I am able to create delivery, and PGI

    Dear GTS Experts,
    While creating sales order I am getting  Sanctioned party list blocked, but I am able to create delivery, and PGI.
    Where Is the wrong ?
    Thanks a lot
    Venu gopal

    Dear Venu
    Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
    Please let me know if any further inputs required.

  • Separate legal regulation for customers and vendors / sanctioned party list

    Hi,
    since we want to separate responsibilities and mails for checking sanctioned party lists concerning customers (sales department) and vendors (purchasing department) we would like to split business partners using different legal regulations within the GTS system.
    But customers as well as vendors are connected to both regulations after uploading, since there is only the country to separate them.
    All checks concerning sanctioned party list screening should be separated according to the responsibilities as well.
    Is there a way in customizing to solve this? If not: how best could this be done using programming?
    Thanks for your help!

    Hi Pici,
    Take a look at the BAdI Method ACTIVE_LEGAL_REGULATIONS_GET.  There you should be able to use the Partner attributes to influence which Legal Regulation is used for the checks.
    Regards,
    Dave

  • Technical updgrade from SAP GTS 3.0 to SAP GTS 10.0

    Friends,
    I am currently in an upgarde project. Can you provide me the list of T-Codes being used in SAP GTS 3.0 and SAP GTS 10.0.
    I would really appreciate the help.

    Hi Chetan ,
    I don't have any experience with SAP GTS , however have a document which has some Tcode for GTS.
    I tried to paste them over here however it doesnu2019t allow me to put all of them because of charter restrictions.
    Let me know your email address and i can send that across to you .
    Vikas
    Edited by: vikasbhan1234 on Aug 3, 2011 3:00 PM
    Edited by: vikasbhan1234 on Aug 3, 2011 3:02 PM

  • Where are the SAP Crystal reports built by SAP

    Dear All,
    Can anybody give me a link of the SAP Crystal reports built by SAP? It should be on the portal about hundreds of them. However, I cannot find where they are. Thanks in advance.
    Regards,
    Yuka

    Hi.......
    Please check this link......
    Crystal Reports Samples
    Regards,
    Rahul

  • SAP Crystal Reports connection to SAP R/3

    Hello Everybody,
    I install SAP BO Enterprise Edition XI 3.1
    SBOP Rich Client Tools XI 3.1
    SBOP Integration Tool Kit XI 3.1
    Java Connector
    Crystal Reports 2011
    I configured all the integration and it works fine, i can log on the Infoview with SAP ID.
    I work with SAP R/3 4.6C
    The problem is when i connect to the R/3, Crystal show me the system that i have in the saplogon.ini, and then i used a user that i have to test, whenn i tried to logon, an error occurs...
    Logon failed.
    Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
    And when i used the user sap*
    Logon failed.
    Details: Name or password is incorrect. Please re-enter.
    So... what do i need to pass that rights to my user??? or do i need to do some kind of customizing in the SAP R/3 system???
    Thanks!
    Edited by: Erick Fernando Nicolas Fernandez on Aug 10, 2011 3:55 AM

    There is a specific set of authorizations that you need to provide to your SAP user to be able to create CR reports against SAP data source. Check in the "SAP BusinessObjects Enterprise Integration for SAP Solutions Installation and Administration Guide" chapter 13 called "Authorization".
    You can download this guide in the following URL: ht[http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf|http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf]
    More product guides on ht[http://help.sap.com/businessobject/product_guides/|http://help.sap.com/businessobject/product_guides/]
    Hopefully it helps.
    Filipe Hartmann

  • How to add in a SAP BW report iview in SAP EP 7.0

    Hi,
      can anyone help me about the SAP BW report iview in EP 7.0,because there is only Bex Web Application iview.I can not find the type of SAP BW Report Iview

    Hi,
    Check out this links.
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/3d1640d4642402e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/3d1640d4642402e10000000a1550b0/frameset.htm
    Thanks
    Senthil
    P.S: Reward Points for useful answers.

  • Sanctioned Party List upload

    Hello All
    I am an independent consultany. I am trying to upload the SPL file in GTS (8.0). I am getting an error (No Country Code is assigned to the SPL Entity).  It is true that no country code is present for this SPL entity. Can we override or create a country code for Unknown countries?
    How can we handle this condition?
    Sudhir

    Hi Sudhir,
    1. Find out the Error country code by checking the upload logs.
    2. There will at least one country code differing with the Country Key in the system.
        Eg. In the System you would have Configured Russia as RF and the XML file will be having as RU
    3. Go to SPRO --> SAP Global trade services --> General Settings --> Define External Country Codes for Data upload
       Here maintain an entry which suits the XML file entry
       Eg : RU for RF for the legal regulation maintained for SPL upload
    4. Perform the upload again. System will not give you the error.

  • Sanctioned party list screening

    Hi All,
    I tried to run t.code-/n/SAPSLL/SPL_CHSC1MLO  which is used for check business partner Address(Batch). I have set up 36 variants . When I tried to execute each variant which takes normally 6-7 hours to complete each variant. Which is not normal. Earlier it was taking 12-14 hours to complete all 36 variants. I am running in testing server.
    Can you please give some advise on this ?
    Appreciate if you can confirm at the earliest.
    Thanks
    Sits

    Reset Buffer initializes the Comparison procedure and Legal Control . This required because SPL screening function does not directly access the SPL master records and the business partner addresses, but it accesses comparison indices that the system automatically generates when it is creatiing SPL master records or business partner data. A comparison index splits SPL master records and Business partner addresses in to Comparison terms.
    So each time when you upload master data of SPL, this needs to be done to reset/initialize old comparison terms and generate new ones.

  • Strange messages from SAP GTS when creating purchase orders (POs)

    Hello gurus,
    we use SAP GTS to check against sanctioned party lists (SPLs) only. We already transferred all our master data to GTS and our partners were checked okay. Now we just activated the document check in our test system. The system produces two different messages we do not quite understand:
    1. When creating a purchase order with an item without material master, the system gives the message:
    Legal Control: Custs Prod. Mast. Required
    Material
    Obviously GTS tries to find a matching material master, which naturally fails. My question is: Can I disable this check somewhere? In our case it is not important what the material is, we just want to check if our vendor is on some SPL.
    2. In some POs there is the message
    Legal Control: Partn. Function Mapping not Maintained
    Partner Function: DA
    I think I understand what the system is trying to say, but fact is, only one partner function is used in that order (VN). We do not even have a partner function u201CDAu201D in our ERPu2026
    At least in the first case, the PO is not checked against the SPL by SAP GTS, which means we would not detect if we ordered from someone on the SPL. This is not acceptable.
    Any ideas on any of those messages?
    Thanks
    Alicia

    Hello again,
    I found the solution myself:
    1. see Re: Goods receipts into GTS are blocked
    2. was a known problem solved by a patch (check OSS).
    Thanks anyway
    Alicia

  • GTS Error " SAP GTS : Legal Control : P.O is locked"

    Hi,
    I am getting the error saying " SAP GTS : Legal Control : P.O(4502089260) is locked".
    Pls help me.
    Regards,
    krishna

    Hi Leela,
    You should check the document in GTS directly whether it's just "lame" block or a real hit. If it's not a hit (the Business Partner may have been found as SPL relevant because too sensitive settings etc.) you just manually unlock the document. To do this follow the path:
    - go to /sapsll/menu_legal
    - SAP Compliance Management > Sanctioned Party List screening
    - In part Documents click Manually Release Blocked Documents
    - Enter Document number
    - Select (Mark) the document
    - Press Green Flag icon (Cancel Boycott List Block)
    - Maybe you will need to recheck the document (the same menu as release)
    Keep in mind the procedure works if there's set SPL block only.
    Best wishes,
    Roger

  • SAP Crystal Reports 2011 - Product keycode

    Dear all,
    I have been requested to install SAP Crystal Reports 2011 to use it as a reporting tool for our SAP ERP 6.0.
    However, I got stuck when the installation program asks me for the "Product Keycode". Does anybody know if there is a temporary product keycode so we can evaluate this product before purchasing it?If so, where is it?
    Once SAP Crystal Reports 2011 is successfully installed, do we need to install anything else in order to set up the connection between SAP Crystal Reports 2011 and SAP ERP 6.0?
    Thanks in advance,
    Marc

    Since someone on your site obtained CR 2011, they should also have a permanent keycode...
    Failing that, the only way to get a 30 day temp  eval keycode is from here;
    http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    But you will still have to go back to who ever obtained your current CR 2011 and ask them for a permanent keycode.
    Re. Connection to SAP ERP 6.0. You're better off asking in the SAP Crystal Reports Database Connectivity|SAP Crystal Reports - Data Connectivity; forum rather than in this forum.
    - Ludek

  • SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

    Hi,
    I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
    and on the ECC side we had to develop Crystal Authorization - how to develop this?
    Can someone screenshot of these steps and please suggest if something else can be done.

    Hi Pawan,
    Search for the error and you should see many threads for this issue.
    Anyway, this is what I found:
    logon failed. you do not have the necessary rights to design reports
    Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
    The wiki should have answers to all your questions regarding Transports, Authorization et al.
    -Abhilash

  • How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

    Hi All,
    We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
    Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

    Hi,
    Here you go..
    1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
    Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
    2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
    3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
    This step you get query reference sheet or column or query general UUID for next step.
    4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
    Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
    Hope this helps.
    Please keep in mind, it might take more time depends on how many query elements you have in the system...
    Comments added for better DB performance by: Arun Thangaraj

Maybe you are looking for