Sand Box has stopped working error when using System Exec.vi with wait until completion is true

I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G

Similar Messages

PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6

Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
PProHeadless.exe has stopped working
I tried rebooting, and it still gives me the same error. Sometimes the project will load, sometimes it won't.
The Premiere projects contain a H.264 .mov file coming from my Canon T2i. I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc. Sometimes I also have a .wav file recorded from a Zoom H4n, but not always. I usually edit those in Adobe Audition with the remove noise feature.
I am running on Windows 7 Ultimate 64-bit. I'm using an i7 with 16GB ram and an ATI 6870 video card.
I have the LUT buddy plugin installed.
It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail. Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
Any help anyone could provide would be appreciated.

Hi Dima,
Thank you very much for your prompt reply. Dragging the sequence from PPro to AME made AME lock up. But your second suggestion of exporting the video directly from PPro seems to be working. I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
Thank you once again!
(although it would be nice if I could go through AME just in case)

Getting itunes has stopped working error when sync wit IPad

I am getting a itunes has stopped working when sync with IPad, using windows 7

It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. Why?!

For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. I am using Windows 7 on my 64-bit computer. iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups. It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me". Why can't I sync these photos, and what can I do? Thanks so much for the help, I really appreciate it!

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Windows keeps giving me "itunes has stopped working" error message when I start itunes? How can i fix this?

After downloading the newest version, 10.6.1, whenever I open itunes I almost immediately get a "itunes has stopped working" error messsage, in which the only option is to hit the "close the program" button. Simply closing the error message closes the program as well. I am operated under windows XP with the latest updates (or so the updater tells me). It seems like its getting stuck trying to send me a new user agreement because dont you have to agree to one for every new update? It just can't seem to get past that point. I tried opening it up in safe mode but that didnt work either. Any help would be greatly appeciated.

Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Licensing has stopped working error durinng launch of Photoshop CS3

I cannot get rid of this error message during launch of PS CS3. I tried uninstalling running the CS3MacClean Script, reinstalling, ... same problem. The same installer and serial number works fine on a clean system so I know there must be a file or two that the cleanup script doesn't remove.
Anybody know what files to delete?

After installation, a system upgrade, machine migration, backup restore, or some other system event(s), trying to launch Adobe applications on Mac OS X results in the error "Licensing for this product has stopped working." You may see error numbers after this message, such as "150:30".
Solutions
Do one or more of the following solutions. Note, Adobe Trial Software that displays the error can not be restored to run.
Solution 1: Run the License Repair Tool
Close any Adobe applications.
Download the License Repair Tool:
www.adobe.com/support/contact/licensing.html
Run the License Service Update.
1. Double click the LicenseRecovery111.dmg
2. Double click the LicenseRecoveryLauncher.app.
3. Enter your administrator username and password when prompted and click OK.
4. Follow the on-screen instructions.
Start your Adobe application(s).
Important: The patch applies to Creative Suite 3 or 4 products, Acrobat 8 or 9, Photoshop Elements 6 or 8, Director and Technical Communication Suite. If your issue was not resolved on the first attempt, run the patch again and enter option 0, when prompted to do so.
Solution 2: Delete the FLEXnet Publisher preferences folder
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Quit all Adobe applications.
On your startup disk, locate and rename, or copy to the desktop and then delete, the following folder:
/Library/Preferences/FLEXnet Publisher/
Start your Adobe application(s).
Solution 3: Repair Disk Permissions
Launch the Apple Disk Utility:
/Applications/Utilities/Disk Utility.app
Select your startup disk.
Click Repair Disk Permissions.
Note: This can take considerable time. For more information about using Disk Utility, consult Apple's website.
Start your Adobe application(s).
Solution 4: Reset your permissions on the FLEXnet Publisher licensing service folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/FLEXnet Publisher/
Solution 5: Reset your permissions on the Adobe PCD folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/Adobe/Adobe PCD/
Permissions Instructions:
Close out of all Adobe applications. Follow the directions below to modify permissions to the folder.
Note: This solution requires administrative privileges on your computer. You will need to provide administrative credentials.
On Mac OS X 10.4
Using Finder, navigate to the folder to be modified.
Control+Click the folder, and then select Get Info.
Expand the Ownership & Permissions section.
Click the Details option to show the various owner and group options.
Verify that you have Read & Write permissions.
Click the lock icon next to the Owner field, choose yourself as the Owner, type in your administrator username and password when prompted, and click OK.
Change the Owner to system.
Change the Permission to Read & Write for Owner.
Click Apply To Enclosed Items and click OK to the warning dialog.
Type in your administrator username and password when prompted and click OK.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
On Mac OS X 10.5
Using Finder, navigate to the folder to be modified.
Control+Click on the folder, and then select Get Info.
Expand the Sharing & Permissions section.
Click on the Details option to show the various owner and group options.
Click the lock icon in the lower right corner. Type in your administrator username and password when prompted and click OK.
Change your username to have Read & Write permissions.
Change admin to have Read & Write permissions.
Change Everyone to have Read & Write permissions.
Click the Gear icon and select Apply To Enclosed Item.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 6: Remove the SQLite journaling file.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
The journaling file exists only under specific circumstances where a client is accessing the database file with certain options enabled. If the file does not exist, continue to the next solution.
Using Finder, navigate to:
/Library/Application Support/Adobe/Adobe PCD/cache
If present, delete cache.db-journal.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 7: (Acrobat 9 only) Reinstall on a non-case-sensitive file system.
Adobe applications are not supported on an OS formatted with a case-sensitive file system. If you attempt to install an Adobe application on a case sensitive volume such as a UFS, HFS+ case sensitive (HFSX) or SMB formatted drive, you get an error that the file system of the setup drive is not supported. Only Acrobat 9 doesn't display such error message and allows you to install the application, but attempting to launch Acrobat 9 results in the error "Licensing for this product has stopped working (error code 130:9)." The drive needs to be reformatted to a non-case-sensitive file system.
To check if MAC OS X is formatted with a case-sensitive file system :
From the Apple menu select About this Mac.
Click More Info and under Hardware select Serial-ATA.
Select the drive Acrobat 9 has been installed on and check the file system in the list. Note if the file system is case sensitive.
Alternatively, use the Disk Utility to check the file system:
From Applications > Utilities, launch the Disk Utility
Select the disk Acrobat is installed on and check its format.
Solution 8: Contact Adobe Technical Support
Adobe Technical Support can obtain logs from your machine to determine additional information about the failure. Contact Adobe Technical Support if the information provided has not helped to resolve your issue.
Additional Information
The Flexnet folders/files required to run Adobe applications can get corrupted, or have permission settings problems, if moved from one machine to another, or through a system restore from Time Machine. Flexnet service licensing failures can't be resolved by re-installating the appliaction, nor will the Adobe CS3 or CS4 Clean Scripts solve this problem. If permissions issues prevented the FLEXnet licensing service from launching, accessing its data, or communicating with Adobe processes, the licensing failure is expected.

Please HELP, "iTunes has stopped working" error after connecting iPod video

People please help me out! I have a Razer Blade gaming laptop with Windows 8 64bit.
I have an iPhone 5, iPad 2 and an iPod video (80GB). I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video. I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
Procedures that I already tried and that were unsuccessful to solve the problem:
Uninstall Quicktime
Uninstall iTunes and reinstall
Reset the iPod (several times)
Delete TEMP files on computer
Restart the computer (several times)
Use a different cable and a different USB port
The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors. My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
Thanks very much!

It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

Adobe Photoshop Lightroom 64 bit has stopped working error

I had not been using my laptop for a while and decided to install lightroom 3.2. I did the install and now when I try to start lightroom I get the error message in the subject line:
Adobe Photoshop Lightroom 64 bit has stopped working
I have a Windows 7 laptop, with 6gb RAM, ATI Radeon video card. The laptop is working well, except I just noticed that Photoshop CS5 64 bit and After Effects both give a similar error upon starting those applications as well.
Any ideas as to how I can solve this problem.
Thanks,
Scott

I have the same problem
Lightroom 5.6 crashes when I enter the printmodule.Windows 8.1 64-bit

Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message

Two months ago, I bought a new computer that uses Windows 8. I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason. Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message. I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details. I've tried installing it as an administrator, but got same failed results.
Any help?
Thanks, Mike

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Fresh Install Mac - Licensing for this product has stopped working Error: 6

We just got the new macbook pro refreshes at work and decided to make the switch to standalone CFBuilder.   We downloaded the trial and installed. On launch we get this error, "Licensing for this product has stopped working Error: 6". Every macbook had the same result.   All are running 2 Ghz Quad Core i7 with 8GB of ram.   All of them get the same error.    All have a fresh install of 10.6.6.   Other than installing Air before the CFBuilder install they have no other applications installed.   Other than Air, there are no other Adobe products installed. All CFBuilders were installed under an admin account.
We've tried all the troubleshooting.   Permissions, LicenseRecovery, Setting the clock back to 2010... we even tried reinstalling OSX, then installing acrobat, then air, then CFBuilder with the same result every time.   We even activated the root account on the system and installed under root. Same result every time.    The Flexnet service never gets created unless we use the License recovery tool.   If we install the updater it still makes no difference.
All options for CFBuilder are grayed out under help.   Registration, Deactivation, Updates...
Any suggestions?

Thanks for posting and letting me know. Yes, it is crappy to have to work-around it like that. I noticed when I installed
Builder that it over-wrote some newer files, but I said "Okay to All". I'm using CS4 not CS5 and my newer files were probably better. I'm glad you got your program working at least. My problem is I started my first Project at the wwwroot level, like all the instructions say. It wasn't until I saw Ben Forta's video of it that I realized I was supposed to start a new folder within the wwwroot folder as my Project folder. Now I can't get rid of my first Project folder without DELETING all of the files in wwwroot, WHICH I CANNOT DO. MANY OF THE FOLDERS THERE ARE WORKING WEB SITES! If you know of any way to detach that original Project, I'd sure like to know how to do it.
Thanks,
Tedra

Problem with new iMac (with Yosemite): Licensing has stopped working Error 150:30

I have just bought a new iMac and used the Migration Assistant to transfer all my existing programs from my old computer.
When I try to launch my copy of InDesign CS4, I get the error message:
Licensing for this product has stopped working
Error 150:30
Because new iMacs do not have disk drives, I cannot reinstall using my original DVD disks.
Adobe’s online support team have said they are unable to help.
The Licensing Repair application does not work in Yosemite
Does anyone have any suggestions?
With many thanks
Greg

Download CS4 products
And fix the permissions on the relevant Library folders. The rest is between you and your Mac - as far as Adobe are concerned, CS4 is officially not compatible with Yoesemite.
Mylenium

ZENcast Organizer Has Stopped Working Error Message

3ZENcast Organizer Has Stopped Working Error Message+ Hi
Please could somebody give me some assistance with the following problem, I have looked through the posts but cannot find anything on this problem.
A couple of days ago I have tried to open ZENcast Organizer on my computer and got the following error message:
''Creative Zencast has stopped working. A program caused the program to stop working correctly. Windows will close the program and notify you if a solution is available'.
It would not open up ZENcast Organizer and just closed the program.
I thought there may have been a problem with the program, so I unistalled it etc. and then went to the ZENcast website where I downloaded and installed the newest version which is 2.0.0.
After restarting my computer etc, I tried to access the program but just get the same error message as above.
I am using Windows Vista Home Premium 32 and have the 32GB Zen.
Any help would be really appreciated.
Regards
Wayne

I have the same system. I am getting the same with ZenCast, although it seems to work more often when I ignore the shortcut and go through the start menu. Strange but seems to work.
Also on Creative MediaSource 5 Organizer I am getting issues with it stopping after 2 songs and giving me the same error.
I am going to try to re-install with software from the website. I had used my disk that came with my Zplus because I thought based on what I read here that it was ready to go.
Will let you know if it gets better or not.

How can I fix a "Plugin Container for Firefox has stopped working" error?

Windows 7, Firefox 30
After changing how Firefox handled cookies (changed to forbidding 3rd party cookies, asking permission to set cookies), I rebooted my system, and Firefox would not start - I got the error message in the question. I uninstalled Firefox, and then re-installed, and Firefox ran fine. After some hours, I closed Firefox and rebooted the system, and again, Firefox hangs upon start, and I get the Plugin Container has stopped working error message.
Since Firefox won't work on my Windows desktop, I'm using my Linux desktop to look here for help. The problem details reported are:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 30.0.0.5269
Application Timestamp: 53914233
Fault Module Name: mozalloc.dll
Fault Module Version: 30.0.0.5269
Fault Module Timestamp: 53911393
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Thanks in advance!

plugin-container.exe is crashing repeatedly. The error code is 0x80000003, the faulting module is mozalloc.dll, version 33.0.0.5397, fault address 0x00001425. Hardware acceleration is disabled, and I have disabled all plugins in an attempt to cure the problem (only Acrobat and Flash were enabled, and Flash is up to date).
(Edit) I'm running EMET 4.1 - if this is memory-related might that be significant?
Here are some crashes from the past few hours (many more if you want them)
bp-9f25a45e-4830-4dd9-a54a-c923f2141020 20/10/2014 22:53
a5c758e1-b489-4c72-98f0-954b2790050b 20/10/2014 22:08
b950661f-25d4-4052-872f-6fb7f3dcc03d 20/10/2014 22:02
b4bad77d-bfab-4913-a4ae-6186ead4cdbc 20/10/2014 22:02
2e970550-11e7-4ed0-8ad6-58025495263e 20/10/2014 22:02
fe4c4f7e-5d0e-4acd-ade7-73d2bd505e04 20/10/2014 22:02
4f83309d-1792-4cef-8f0d-b0465e0c4c39 20/10/2014 22:02
57f40624-b424-4181-ab93-0f37fa4188f6 20/10/2014 22:01
3694a431-a1ac-4077-8019-7e59a1595495 20/10/2014 22:01
cdeafebe-5444-4041-8517-e077c414d2df 20/10/2014 21:52
18ae849e-2c17-4ee0-91bc-57bf4895e697 20/10/2014 21:52
eec36b4b-9f8e-4a73-9e27-d71b21c5011c 20/10/2014 21:19
d98ba06e-eb89-41f7-86ee-517f410a342f 20/10/2014 21:17
1ffb43bf-6750-4629-a2aa-2f0ad39da9ea 20/10/2014 21:09
cc0ab618-e918-4fd7-ba52-bf01aadc5a3e 20/10/2014 21:09
8829fe23-9fd0-4826-89cf-a3e9fd860c56 20/10/2014 21:08
e2d6dc1a-41a0-48cb-b7b0-81d4ef787bbd 20/10/2014 11:51
a266ba42-fc1c-4204-9f1b-289f2b99c451 20/10/2014 11:51
a586d4c0-2102-4c80-a73f-b977000b46dd 20/10/2014 11:51
a64d9089-3f91-4504-bcad-122bfd0a01e9 20/10/2014 11:50
caedc737-d9dd-4bfb-83fd-400ac5a6af6a 20/10/2014 11:50
1a56651a-d096-45a5-9afa-e6c0c822d892 20/10/2014 11:38
71f07b05-8310-4f1d-b5e9-70a514e8a43e 20/10/2014 11:38
2de8971d-d1cf-4077-bac0-be405dd76ff5 20/10/2014 11:38
9ffe41cc-844b-4b93-b172-28154eabfc0c 20/10/2014 11:38
bf95a7d3-0e08-485d-84e9-3638a749244b 20/10/2014 11:38
061112b6-e919-4e87-a815-6c137a48d375 20/10/2014 11:38
1d8ebe85-a5a3-4120-920a-0556be7524c8 20/10/2014 11:38
b0fcb220-1515-4c94-8d35-c65c4cb7743c 20/10/2014 11:38
07430c7b-2424-4f90-8a0d-fb90d3c829f3 20/10/2014 11:38
99b8b695-995f-4bce-a879-8bd0e89cd296 20/10/2014 11:26
d01187a9-bb0a-4bc8-b6fe-9669b5a2d858 20/10/2014 11:26
9b650499-6ac1-42c8-9a92-f762d61deafd 20/10/2014 11:26
ec6044dd-8940-4f6e-8e97-94c23213a973 20/10/2014 11:26
a08bb60e-f686-4417-b5ce-3e736c9ed625 20/10/2014 01:15
4eb90c2b-f9ed-4952-b8e9-71fffe7ecf64 20/10/2014 01:14
03642f9d-09ea-46ea-b66d-62dee98a20fe 20/10/2014 01:14
4cd20689-ad73-4371-88c6-d80f4ed95313 20/10/2014 01:13
c72ee7ad-389a-4a14-a5cf-539765e707c4 19/10/2014 21:08
8593221b-8024-45c0-a07b-85dcf5bc9035 19/10/2014 21:07
32a5c4d7-dad9-4fc2-b31e-716881e4cefe 19/10/2014 21:07
d46d8d27-f26e-488c-ab89-5f029d139246 19/10/2014 21:07
da22093e-970d-4724-b074-2ae494745e0b 19/10/2014 20:46
3ca99f2a-0138-4403-81fa-e4245ff9a7db 19/10/2014 20:45
c7252857-d6bb-4c0d-95e5-83f1fd9bf175 19/10/2014 20:45
87c7b0a9-a2b5-4c98-9953-cf684c15f3d5 19/10/2014 20:44
c60f13f8-18b5-42b6-9b02-810cb5a77347 19/10/2014 20:44
188ba801-1616-4048-a941-b60126788efe 19/10/2014 20:44
1c3d4f1e-c3be-469a-a348-5e93d1443bae 19/10/2014 20:44
852bf33f-d3b2-40d3-820e-aea7e1c367da 19/10/2014 20:20
d5cda65a-4fa7-4f9e-b5a0-bacfb1bfcebd 19/10/2014 20:20
d6b7137a-d347-4a39-91a6-e0e5f817b71b 19/10/2014 20:20
a031b2f8-cbb0-4fd5-abf1-a557a4021ce7 19/10/2014 20:20
58cf92b6-f4d7-4ab8-98ea-89cc311338df 19/10/2014 20:20
The crashes are intrusive but Firefox itself is not usually affected - so isolating the plugins works as intended.
(I tried creating a separate thread for this but the process stalled at Stage 3)

Sand Box has stopped working error when using System Exec.vi with wait until completion is true

Similar Messages

Maybe you are looking for