Sandbox server - SP2010 installation

Hi all,
I have given a sandbox server with Windows server 2008 and SQL server 2008 for which the hostname, domain name and ipconfigurations are already configured with our organizations default settings, now i have been asked to install SP2010 on that.
My question is can i change the computer name and domain name like "contoso.com" ?
waiting for ur quick reply ....
Best Regards
Anil kumar

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

Making Sandbox server with production data

Hi experts ,
We are going build sand box server we are presently using windows server 2003 R2, SQL server 2005 ,SAP ECC6.0
we are just installed operating system only please Guide me we have are Going to approach system copy method or
normally installation then after full backup restore method please kindly guide me how to build sandbox server with
production data
Best Regards
SURESH .M

Hi Suresh,
Refer to below SAP notes and the check out the links within the SAP note for necessary documentation
683447 - SAP Tools for MS SQL Server
1152240 - Setting Up Microsoft SQL Server 2008 (R2) ( Refer Point II in this note )
Note 151603 - Copying an SQL Server database
Hope this helps.
Regards,
Deepak Kori

Problem booting Solaris 10 on ProLiant server after installation.

Hi all!
I have a brand new HP ProLiant DL360 G5 server. It contains 6 internal
hard drives. RAID 5 is configured on these drives using built-in HP
Smart Array P400i controller. I've just installed Solaris 10 8/07 on this
server. Solaris requires a driver for P400i controller. I'm using Driver
Update CD created from HP provided ISO image. Solaris 10 is
officially supported OS for DL360 G5 server.
Installation proceeds as expected:
1) At the begining of Solaris installation, Driver Update is used to
load HP driver for raid controller. During installation, disk is
recognized as c1d0t0 (the only disk in system); one partition is
created on this disk.
2) Disk is devided to 6 slices:
c1d0t0s0 - swap, 4GB
c1d0t0s1 - /, cca 32GB
c1d0t0s[3,4,5,6] - /zones/[a,b,c,d] - each cca 160GB
3) At the end of installation, CPQary3 driver is installed to target
system without any errors reported. No errors are reported during
installation at all.
After reboot, GRUB is started. It shows boot menu containing two
options:
- Solaris 'normal' boot
- failsafe boot
PROBLEM: Selecting 'normal' boot leads to immediate system restart.
According to documentation, this case occurs when PCQary3
driver is not installed.
I'm able to boot using 'failsafe' option in grub. After entering single
user, I load PCQary3 driver to runtime using 'install-du' command.
I'm also able to find instaled Solaris using 'install-recovery' and mount
its root volume to /a directory. Necessary driver IS installed inside
/a/kernel/drv/ directory. Options 'bootpath' in /a/boot/solaris/bootenv.rc
file is set up correctly pointing to device associated with /dev/dsk/c1d0t0s1
device. Also GRUB is able to recognize UFS filesystem for boot partition.
I've already tried (without success):
1) Use RAID 1+0 instead of RAID5
2) Create only 3,5GB partition instead of 700GB large one.
3) Place / on c1d0t0s0 instead of c1d0t0s1.
4) Re-create boot archive using 'bootadm update-archive -R /a'
So, everything seems to be installed correctly, but system cannot boot.
Do you have any ideas how to fix this problem?
Jozef

Sounds like an issue I just had with a brand new X4150, installation and failsafe worked fine, but normal booting led to immediate reboot of the server. This was due to an incompatibility of solaris and intel's newest generation xeon chips.
You can still boot 'normal' solaris in 32-bit mode:
hit 'e' at the grub menu, 'e' again to edit the 'normal' boot entry and add 'kernel/unix' after multiboot. This should boot up solaris in 32-bit mode. From there, download and install the latest patch set (125370-06 and 127112-05 are fixing this issue). After that you should be fine.
Bjoern

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

SQL server 2008 Installation media

HI all,
I am trying to install SQL server 2008 express, and in the "SQL Server Installation Center" i select "New SQL Server stand-alone installation or Add features to an existing installation" After selecting that option a window pops up and prompt me to "Browse for SQL Server 2008 Installation Media"
Now, what exactly is "SQL Server 2008 Installation Media"? how am i suppose to locate/browse the installation media on my computer?
i am totally new to SQL server and i am self-learning it from a book, the problem is that the book does not explain where to browse for instillation media!
my system info:
Windows 7 Home premium
64-bit OS
AMD 2.60 GHz
6.00 GB RAM

This is a solution for Windows 7 users who used the Web Platform Installer (I'm going to call it WPI).
1 - Make sure you have power shell installed.
2 - Install the sql 2008 SP1. google it and download it.
Now comes the detailed part...
You have to get a hold of the installation files without using WPI.   The WPI stores the installer executable on your computer and you have to run it and then get a hold of the directory it extracts before it deletes it.    You need to locate the WPI installation file and then run it manually. Mine was located at...
C:\Users\**username**\AppData\Local\Microsoft\Web Platform Installer\installers\SQLExpressAdv\12A6B9C2237817DEEEB3DCE22AFFA25B6794850C
Of course you substitute your own username.   You may need to reveal hidden folders.   If you can't find it try running a search for the SQLExpressAdv folder.
In that folder you will find a file named "SQLEXPRADV_x64_ENU.exe" or something close to it. Run it and either on the first or second step you will see it extract a bunch of files.   Don't go any further after it runs that extraction.   Go to that folder and copy all the contents it extracted to a new folder and whamo.   That's where you will point your sql browse box to.
Now you can uninstall, set up servers, whatever it is you were trying to do.
-N8

After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

     After
sql server 2012 installation, I   attached my production db. Because of some reasons, i
changed sql engine account from network service user to system user by means of sql server configuration manager.
     Now , there isn’t
a problem at sql server running system. But
I have doubts that
this can produce problems later. Because sql server database engine account must have privileges that listed below;
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
While sql server installation, setup gives these
privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
privileges.
Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
Log on as a service (SeServiceLogonRight)
     Bypass traverse checking
(SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
Replace a process-level token (
this can be set from user rights assignments)
Adjust memory quotas for a process
(this can be set from user rights assignments)
Permission to start SQL Writer (
? - give advice )
Permission to read the Event Log service (
? - give advice )
Permission to read the Remote Procedure Call service (
? - give advice )

Our server is windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu that is in local security policy settings gui.
And i have seen those permissions below were not granted to system user;
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
So, briefly you say, don't panic ?

SQL Server 2012 installation and to default user database files to a particular path

Hi, I am working on SQL Server 2012 installation on one of our test boxes and I would like to configure the sql server install binaries and all the system databases but for tempdb to be in my C and tempdb on a different drive and once all this is set up,
whenever a developer creates a new database without specifying the path for the mdf & ldf files. They should be defaulted to a path like "D:/Data file" & "D:/Log file" for instance instead of being created on the C drive.
Thanks in advance.........
Ione

Hi,
You can of course set default location of database through management Studio please refer below link. Once you change default location even if you do not specify location it would take default one.
http://sqlandme.com/2013/03/18/sql-server-changing-default-database-location-for-server/
I would advise you not to keep files on C drive let it be dedicated system drive also its quite possible that SQL server service account would not have privilege on C drive so after you move tempdb SQL server would not come online as tempdb files cannot
be created . Tempdb is always recreated after SQL Server starts so you just need to change location once using Alter database command
See example mentioned in below link for how to do that
http://msdn.microsoft.com/en-us/library/ms345408%28SQL.90%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Help regarding free BI Sandbox (Server) availability.

I would be thankful if someone can please share a link with me which provides free access to BI Sandbox Server. so that I can install on my local system.
Regards
Ranendra

Look at the trial version of SAP BI BusObjects EDGE server edition here
http://scn.sap.com/thread/3216806 and
https://global.sap.com/campaign/ne/free_trial/businessobject_bi_edge_edition/index.epx?kNtBzmUK9zU

The Server Core installation option is recommended for servers running Hyper-V

Hi,
I installed Hyper-V Server 2008 R2 on my machine and upon running BPA it says that
The Server Core installation option is recommended for servers running Hyper-V
I don't understand what it meant by re-installing hyper-v core instead of the full installation. My Hyper-v is a stand-alone Hyper-V Server 2008 R2 that is the free one.
Thanks!
JAnus

Hi JAnus,
I am afraid you can not change that report .
Please just ignore that .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Server-side installation of Headstart

We've got a live database (8.1.5) with Headstart (2.1.2) installed, all the application's objects, forms, code libraries have been generated using Headstart.
I've created a test database, generated my applications tables from the original repository there, and I want to run my existing live Headstart forms against the test database but I'm unsure about the Headstart server-side installation.
From the installation guide, I can see that I need to run insthst.sql and hstuseri.grt, but I haven't yet got a Headstart Template Package owner. I know that in the live application, the Headstart Template Package owner is the owner of the Headstart objects.
I'd like to know if I create a Headstart Template Package owner in my test database, do I then run insthst.sql and hstuseri.grt, and is there anything else I need to do.
Thanks,
John.

In your test database, you need to have all of the Headstart runtime objects. There are a couple of options for how
to do this. These are described in the User Guide Chapter 8, Runtime Environment.
You will use insthst.sql to create the objects.
If you use a separate Headstart schema, then you can use hstuseri.grt to create the required grants and synonyms
from your application owner schema to the Headstart schema.
Depending on how your users log onto the application, they will also need access to the Headstart objects.
Regards,
Lauri

Headstart Server Side Installation

Hello,
We want to use Designer 6i with Headstart 1.2.1 patch 10 to 13.
I know that you have to migrate the applications (incl. QMS) with the repository of Designer 6. For this migration I use a separate PC.
On the other PC we have installed Designer 6i with an oracle 8.1.7 database (Unix).
Know I want to install the Headstart Server Side installation for Designer 6i.
After the installation i find a lot of errors in the insthsu.log. The first error is that the ci_application_systems view doesn't have a version column. I found out that the ci_application_systems of 6 not the same is as the ci_application_systems of 6i.
Wat are we doing wrong?
Thanks
Leon

Leon,
You are trying to run the Headstart Server Side Installer of Headstart 2.1 against a Designer 6i Repository. This is not possible, because the Repository meta model has changed considerably in 6i.
Patch 13 allows you to use the Headstart 2.1 Template Package with Designer 6i, but it does not allow you to use the Headstart 2.1 Utilities with 6i. For that you need Headstart 6i, which is currently in Beta. If you have an Oracle consultant who is experienced with Headstart on site, you can join the Beta program. Contact your Oracle Consulting representative for more details.
kind regards,
Sandra Muller

How retrieving the product key for a SQL Server 2005 installation

Hi,
is it possible to retrieve the product key associated to a SQL Server 2005 installation?
If yes, how?
Many thanks

Hello,
The following tool may provide you the product key for SQL Server 2005 and SQL Server 2008 instances.
http://www.nirsoft.net/utils/product_cd_key_viewer.html
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Weblogic Server Upgrade Installer

Hi ,
Can anybody help me How can i download weblogic Server Upgrade Installer
I want to upgrade weblogic10.3.5.0 to weblogic 12c
Thanks
Bhaskar

Hi,
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/prepare.htm#BABFIDAB
From the above link
WebLogic Server 12.1.1 is a new major release, there is no upgrade installer for this release
You Can follow this link,it has step wise details
http://docs.oracle.com/cd/E24329_01/web.1211/e24497/upgrade_dom.htm#i1072877
Prior u need to install weblogic 12.1.1.0,and take backup of your existing domain.
Choose the Domain Upgrade Wizard option from the Oracle program group in the Windows Start Menu by clicking Programs > Oracle WebLogic > WebLogic Server 12c > Tools > Domain Upgrade Wizard.
Regards
Fabian

MDM Server : NetWeaver installation is not necessary?

I have been assigned in a project which will require the usage of MDM for ironing data information between our Siebel and SAP system. I have got the information that in order to install MDM server, NetWeaver installation is not necessary.
I guess this is correct but from your experience, is it also recommended?
The installation will be on Linux with ORACLE DB.
Thanks in advance,
Loukas

Hi Loukas,
if you want to use MDM, you (at least) need:
- a Database Server, Oracle is fine
- the MDM Server
- MDM Console for Repository maintenance
- MDM DataManager for viewing data
- MDM ImportManager for importing data
- MDM Syndicator for exporting data
You definitely do not need the whole Netweaver stuff - no application server or anything like that. However, if you want to integrate MDM into your system landscape, SAP XI is recommended to act a a message broker between any system and MDM. I don't know the requirements of XI.
You can run MDM Server on a single machine, together with the database and all the client tools can be on different machines.
I hope this helps. If you need further information, we'd need a more specific desciption of the requirements.
Best regards,
Martin

Sandbox server - SP2010 installation

Similar Messages

Maybe you are looking for