Sandbox: Solstice(12720) deny iokit-open IOHIDLibUserClient

Sandbox: Solstice(12720) deny iokit-open IOHIDLibUserClient,copy from the console, anyway to fix it?  this leads my game no responding

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) -exec ls -Odel {} \; | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "85." Please post it in a reply.

Similar Messages

  • Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

    im getting the following error trying to upgrade my screen driver.
    "Access Denied Error Opens when Installing HP Monitor Software (Windows 7)"
    I found this error in the help area but it doesnt address the problem, it simply describes the device manager instalation procedure, which I am using , and which results in the error.

    Hi debgibson,
    What is the monitor model number and what is the PC model number?
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • Sandbox: xcscredd(10021) deny file-read-metadata /Users or other ID

    What is this always listing on console screen ,it change to another number and still listing after I command kill it all .
    So many following message on console screen everyday, how to make it stop running ?
    Sandbox: xcscredd(10021) deny file-read-metadata /Users
    Any Mac user have solution fix it ?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Access denied while opening any PDF the second time / Zugriff verweigert beim zweiten Öffnen eines beliebigen PDF

    Reader produces "Access denied" while opening any PDF the second time. A LogOut/LogIn or restart is necessary to open a PDF again successfully. User works with a PC (Win7). The file is located on the desktop in a Windows 2008/2012 AD, user profile on networkshare. The same procedure with a file located on any other networkshare or locally on harddisk works without error. Analysis with processmonitor indicates that the file seems to load and then is cancelled for some unknown reason. The problem is somehow growing, beginning with 1 PC and exists now also in our Citrix environment (2 users). Access rights seem to ok and the same on all tested shares (full Access or Change rights).
    Der Reader bringt den Fehler "Zugriff verweigert", wenn man das zweite mal ein PDF öffnen will. Dabei ist der Fehler völlig unabhängig davon, ob man das gleiche oder ein anderes PDF öffnen will. Um wieder erfolgreich ein PDF zu öffnen, ist ein Ab- und Anmelden bzw. ein Neustart des PCs (Win7) nötig. Umgebung ist eine Windows 2008/2012 AD, Profil liegt im Netz. Der Fehler tritt nur bei PDFs auf, die auf dem User-Desktop liegen. Sind die Dateien irgendwo anders im Netz oder lokal auf der Festplatte, kommt der Fehler nicht. Eine Analyse mit dem Prozessmonitor zeigt, dass das Laden des PDFs irgendwann gecancelt wird, warum auch immer. Das Problem scheint sich auch langsam auszuweiten. Es hat mit einem PC begonnen und tritt nun auch in unserer Citrix Umgebung bei bis jetzt 2 Usern auf. Die Berechtigungen scheinen überall ok und gleich zu sein (Volluzgriff oder Ändern).

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

  • Access Denied Bug Opening PDFs from the DFS in Reader X

    Hi,
    Do you have any timelines for when a bugfix will be released for the Access Denied problems when opening PDFs from a DFS share with Protected Mode enabled? We were hoping to make use of the new sandboxing technology within the corporate environment, as recent issues with security vulnerabilities (in Adobe Reader 9, the authplay.dll issues) would be mitigated by the technology. However, as the Protected Mode does not work when opening from the DFS there is no point in moving to Adobe Reader X from 9.4.1 at the moment.
    It would be good to have a release date so that we can start taking advantage of the technology as soon as we are able to.

    There's no dates, or indications of when this will be done. Thanks for your useful assistance though.

  • "Access denied" when opening report on RAS Server

    I'm sure I'm doing something wrong, but I've only been able to open a report using the rassdk protocol from the server where my java code is running.    This is fine, but I was hoping for efficiency sake that I could have reports reside on the RAS server itself.
    My ras server definitely has a Crystal report called EBTest.rpt in the c:\temp directory.  I run this code...
    ReportClientDocument rcd = new ReportClientDocument();
    rcd.setReportAppServer(ReportConstants.RAS_HOST);
    rcd.open("c:\\temp\\EBTest.rpt", OpenReportOptions._openAsReadOnly);
    rcd.close();
    According to the JavaDoc, this should work, but I get this error ...
    Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Access denied. Please check directory setting for files you can access.---- Error code:-2147467259 Error code name:failed
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
    Am I missing something trivial?  
    Thanks,
    Eric

    Now that I've got it working, I expected that the RAS-local approach would be much faster than the RAS-remote, but I didn't find that to be the case in a quick test that I did.  Is this what you'd expect?  Or is there a different part of the ReportClientDocument interaction that would be more efficient. 
    From what I've seen, the ReportClientDocument construct and open() are one of the expensive aspects of the report rendering.
    Enclosed are the results from a test I did:
    --PERF--20 iteration test for 'Test local report initialization'
    --PERF--WARMED UP in 3359 ms
    --PERF--,Iterations          ,Total Time (mS)     ,Avg(ms)/Iteration   ,Transactions/sec   
    --PERF--,20                  ,35515               ,1775.75             ,0.5631423          
    --PERF--20 iteration test for 'Test remote report initialization'
    --PERF--WARMED UP in 1828 ms
    --PERF--,Iterations          ,Total Time (mS)     ,Avg(ms)/Iteration   ,Transactions/sec   
    --PERF--,20                  ,37109               ,1855.45             ,0.5389528          
    And here's the bulk of the code that generated those results...
    int numIterations = 20;
    PerformanceUtils.runPerformanceTest("Test local report initialization", numIterations, new Command(){
         public void execute() {
              try{
                   ReportClientDocument rcd = new ReportClientDocument();
                   rcd.setReportAppServer(ReportConstants.RAS_HOST);
                   rcd.open("D:\\Program Files\\Business Objects\\BusinessObjects Enterprise 12.0\\Samples\\EN\\Reports\\triCalendarPeriod___-___Find___-___Months.rpt", OpenReportOptions._openAsReadOnly);
                   rcd.close();
              }catch(Exception e){
                   throw new RuntimeException(e);
    PerformanceUtils.runPerformanceTest("Test remote report initialization", numIterations, new Command(){
         public void execute() {
              try{
                   ReportClientDocument rcd = new ReportClientDocument();
                   rcd.setReportAppServer(ReportConstants.RAS_HOST);
                   rcd.open("rassdk://./test/data/crystal/triCalendarPeriod___-___Find___-___Months.rpt", OpenReportOptions._openAsReadOnly);
                   rcd.close();
              }catch(Exception e){
                   throw new RuntimeException(e);

  • Error: Access Denied while opening the Sharepoint 2010 site.

    Dear All,
    When I am trying to open the site I am getting followinh error,
    Error:
    Error: Access Denied
     Current User
    You are currently signed in as:  DomainName\Administrator
    Sign in as a different user 
     Go
    back to site
    Can anybody please tell me how ro resolve this isse ?
    Thanks and Regard's
    Harish Patil

    Hi,
    Run the PowerShell cmdlet to list and check the users permisssion on SharePoint site. You may refer to the articles below.
    Get Users Permissions List on SharePoint Webs – PowerShell Script
    http://mkdot.net/mknetug/mk_sp/b/darko/archive/2010/10/01/get-users-permissions-list-on-sharepoint-webs-powershell-script.aspx
    How to Check Effective Permissions of a User in Each Site in a Site Collection in Sharepoint 2007 and Sharepoint 2010 using Powershell
    http://rahulrashu.blogspot.com/2011/12/how-to-check-effective-permissions-of_11.html
    Hope that helps.
    Ivan-Liu
    TechNet Community Support

  • "Access Denied" when opening a PDF in a browser

    Hi,
    I have a problem I can't solve.
    I'm creating a intranet website. In this, i want display PDF but the browser reply "Access DenIed".
    I stock my PDFs in a network drive where i have the rights on folders and files.
    I try to unckeck "Enable protected mode" but no change.
    I try to open with another PDF reader (Foxit) and it works, but i want keep Adobe by default reader
    for my users.
    I have the last version of Abobe Reader XI (11.0.05.3).
    Thanks.

    ... and/or
    Configure Adobe Reader to not use a Web Browser to open PDF documents... (see the Adobe.com for admx files to apply this setting by group policy) (
    http://forums.adobe.com/thread/392489 )
    Start>Adobe Reader>Edit>Preferences>Internet>uncheck "Display PDF in browser"
    It seems that Adobe have recently changed the location of that setting in Adobe Reader (at least on 11.0.4).  They've now hidden it under Edit > Accessibility > Setup Assistant > Then on page 5 of 5, there's a tick box to toggle 'Display PDF
    documents in the Web Browser'.
    However, it doesn't work like it used to though, as it won't just open a PDF in Adobe Reader instead of the browser.  It will instead ask to disable Enhanced Protected Mode to run acroPDF.dll. 
    And if you try disabling the Adobe PDF reader add-on in Manage Add-ons to try and force it to open in Reader, then when you visit a PDF link, you just get the same blank page (shown below) with the black crossed out circle in the top left, but without the
    message bar at the bottom of the window.  The only way to open the PDF is to either turn off Enhanced Protected Mode and allow acroPDF.dll to run or if there's an original link to the PDF, right click and select 'save-as'.
    I think it's about time Adobe released an x64 PDF viewer...  Or at least there should be an open/save dialogue box in IE.
    If you've got Reader 11.0.4 installed, you can try it for yourself with this PDF link:
    http://helpx.adobe.com/pdf/adobe_reader_reference.pdf
    (The below screenshot is with 'Display PDF documents in the Web Browser' UN-ticked in Adobe Reader settings, so it should open in Reader instead.  But it doesn't.  And with the Reader add-on disabled you get the same page, but without the
    message at the bottom.)

  • FYI: 1 possible solution and cause to Access Denied on opening PDF on network shares with Reader XI

    FYI
    Hi.
    Updated in May to another release of Reader XI.
    Got the problem stated in the titled of this post - with access denied for PDF on network shares.
    Reason:
    Long time error in Adobe Reader with shares and thumbnails causes me to use the thumbnail and preview fix done by a third party. Has worked for years - while Adobe has not seemed to care about fixing this problem ...
    That's the real reason ...having to use an almost out-dated fix now.
    However, if using the thumbnail and preview fix:
    Then its legacy interaction with Adobe Rader is probably the cause of this error - reinstall (reregister) the preview and thumbnail fix - and the problem will go away.
    ... and Adobe Reader XI is back up with protected mode working - on Network shares ... with the thumbnails there.
    Now if anybody is reading this from the Adobe staff ... please add the thumbnail and previews to Adobe Reader?
    May you forgot this did not work on shares ... like forgot "forever" ... and meanwhile users got a third party fix they reinstall everytime from the age of Adobe Reader bloatware creating the FoxIt Reader spinoff.
    Since then Reader has come a long way in tearms of realibility ... however, the missing thumbnail and preview on shares and x64 platform needs to be fixed.
    Then these "cannot" open PDF on Network shares reports may go away ...?

    If you have any bugs to report, this is where to do it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • 'access denied' when opening from Office

    Hello,
    I've experienced this 'access denied' message too. Now I realized that when opening AdobeReader manually all works fine.
    But when Reader is closed and is opened by Office after saving as PDF file - it still shows this error message.
    There's nothing wrong with the file - when opening manually from inside of Reader.
    Is it a problem with commandline execution?
    I'm sorry for any problems you got - especially from reading my english...

    What app are you running - Final Cut Pro or Final Cut Server?
    x

  • Security Sandbox Violation when trying to open new window

    Hi guys
    I have a flash button that I would like to open a new window
    of a specific size when clicked. I found some code on a thread at
    flashkit and tried that out, but when testing in flash I get the
    following message:
    *** Security Sandbox Violation ***
    Connection to javascriptopenNewWindow('
    http://www.designlogic.com.ph/assets/Web_pages/tropicanacomp.gif','height=500,width=500,to p=10,left=100,toolba
    r=no,scrollbars=yes') halted - not permitted from
    file:///C|/Users/James/Graphics/Websites/Design%20Logic/Raw%5FImages/Flash/flashbuttons/G allery%20icons/webPagesIcons/Tropicana1.swf
    Here is the code I inserted into the actionscript:
    on (release) {
    getURL("javascriptopenNewWindow('
    http://www.designlogic.com.ph/assets/Web_pages/tropicanacomp.gif','height=500,width=500,to p=10,left=100,toolba
    r=no,scrollbars=yes') ");
    I also tried steamrolling ahead and testing it from
    dreamweaver after inserting the flash onto my page, but it doesn't
    fucntion. No surprises there.
    Would really appreciate it if someone could help me out with
    this.

    Oh its AS 2.0 by the way :)

  • Permission denied while opening a file.

    Hi,
    I have a program, in which I am trying to open local system file.
    When I give the link as http://www.googlestepper.blogspot.com , it actually connects and opens the URL; whereas and when I give the link as file:///d:/test.txt, it does not open and says 'Permission denied' from a message box.
    More in detail:
    The flow is between JS, PHP and a text file (text file contains two columns; the first is like name and the second is like value where the value is a link: http or file... name-value pair). When user types the name in a text box and presses 'Enter' key, it locates the appropriate value (here link: http or file) from the text file and opens the link. Link opens for http only, but not for file:///, it says 'Permission denied'. I am using Apache.
    Please help me in solving the problem.
    Thanks and regards,
    Leslie Prabakar Ruphas V

    I'll call you Ralph,
    There is a strange a little rule in webservers that says "thou shalt not allow access to the file system!"... It's a security thing... It means that no matter what a hacker does within your server s/he shouldn't have permits to see anything outside of that webserver... so compromised doesn't mean pants-down-hello-world.
    You can't turn it off, and if you could then you really wouldn't want to, and if you figure out how to turn it off flick me your IP address and I'll empty your bank accounts for you. Point taken?
    So what do you do instead? Publish your html page in or under your tomcat's webapps folder, and access it's via it's url.

  • Access Denied when Open Offline File.

    Dear All,
    User has Network Share (with full permission to access files and Folders), I have configure it as an Offline folder (Always available). 
    Problem is that when on network he can access and open all the files. But when he goes offline (No Network), he can open all the Folders but when he tried to open some files few of them are giving errors. "Access Denied"
    Encryption is not enable.
    Can anyone please suggest the resolution.
    Thanks
    Kamran 
    Best Regards

    Hi,
    Please make sure all these file are enabled offline.
    Please see if this article is helpful to you:
    Users may receive an "Access is denied" error message if you make files and folders available for offline use
    http://support.microsoft.com/kb/275461
    Meanwhile, try this:
    1.Make sure that your files and folder have been synchronized. Reinitializing the cache prior to synchronizing will
    cause you to lose any data that isn’t synchronized.
    2.Click Start, type regedit in the Start Search box, and then press
    ENTER.
    If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
    3.Locate the following registry subkey, and then right-click it:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CSC
    4.Point to New, and then click Key.
    5.Type Parameters in the box.
    6.Right-click Parameters, point to New, and then click DWORD (32-bit)Value.
    7.Type FormatDatabase, and then press ENTER.
    8.Right-click FormatDatabase, and then click Modify.
    9.In the Value data box, type 1, and then click OK.
    10.Exit Registry Editor, and then restart the computer.
    Karen Hu
    TechNet Community Support

  • "Access denied" when opening the timeline

    I have FCP 6.0.6.  I dragged a picture into the timeline, and the browser shut down.  When I tried to reopen the timeline, it said "access denied."  How can I reopen the timeline?  I really don't want to have to start over.

    What app are you running - Final Cut Pro or Final Cut Server?
    x

  • Access denied when opening project using project professional client application

    Hi,
    I have some users who are members of 'Team Members for Project Web App'.
    They can open projects using the browser just fine.
    But, if they try to open it using the menu  :  Projects Tab > Open > In Microsoft Project,
    the project professional client application starts but shows an error : 'you do not have the required permissions to perform the operation'
    Is there some restrictions for 'Team Members for Project Web App' with the project professional application?

    Indeed team members should not be added to the PM group. But they should not either edit directly the proejct plan. The process is the following:
    The PM assignes a resource on a task, either from PWA or MS Project Pro,
    The PM publishes the project plan,
    The TM goes to the task link in the quick launch menu on the left side,
    The TM enters the actual work done on his assignments and submit it to the PM,
    The PM goes to the approval center, sees the task updates waiting for approval, approves or rejects the task updates,
    The PM opens the project plan, updates the remaining work and publishes again the project the the task updates are taken into account and send to the TM.
    See this
    reference for Project Server 2010 but still applicable for 2013.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

Maybe you are looking for

  • When creating new table in sqllite db via Flex it become encoded as "utf-16le"

    Hi Guys I have some annoying problem with my AIR application The application is communicating with a local DB (sqllite). as part of initial installation I'm checking if the db exist. in case not then: I create one (file) create the relevent tables in

  • Transition from video to video on command

    Hey, some have answered this question partially already. I'm doing a dinner and presentation so I need to have a video loop during the dinner, then dissolve to different videos as the awards go on. There will be a video, then a background video as th

  • How to hide background apps from dock?

    I have an application (Hardware Growler) that appears in the dock, but it's a background app, so I'd like it to not appear in the dock. In the user account preferences, there's a "hide" checkbox for programs that are launched on startup. No help (but

  • Every time I click on a desktop shortcut, I get an error dialog in FF 4.

    Every time I click on a desktop shortcut, I get a Windows (XP) error dialog in FF 4. I click OK, and the browser then opens to the shortcut page. When no browser window/tab is open, this happens EVERY time. However, if the browser is open, it will op

  • The system cannot find my hard drive - is it broken?

    I recently updated to OS X 10.4.4 and everything was fine. But today the system froze and I couldn't do anything but press the on/off switch to quit. After that I couldn't boot the system normally. If I start from the System-DVD and open the disk uti