SanDisk 32GB Class 10 MicroSD stops working || Lum...

I have a 32GB Class 10 SanDisk MicroSD card that runs perfectly on all devices, except my newly purchased Lumia 730.
About 2 weeks back, I had purchased my Lumia 730 and installed my 32GB card, upon which it worked for about an hour or 2 and then the "About removing SD Card" message started to pop up. I tried rebooting the device, reinsterting the card, and all the basic fixes that one can think of on such situations and nothing seemed to work. So I connected the card to my PC to check if it worked, and it did, perfectly so. Yet, I formatted it, believing it might still work on my phone.
I have tried every file system available for my card, and all give the same message on startup, that the sd card needs to be fomatted.
Somewhere in this community, I read that resetting the phone muight help, but it didn't.
Now, my exact situation goes like this:
If (After inserting the card and turning the phone on):
     i. The phone reads the card-
          a. It stops working after some time.
          b. It asks for a format that it fails to perform and stops detecting the card.
     ii. It doesn't read the card-
          a. I format it, copy data, then insert
          same as (i)
          b. i format it, insert, then copy data,
          works well till I exceed a particular data limit, of about 4GB I guess.
In case (ii,b) I had formatted the card on FAT32 and inserted, upon which my phone read the card and kept on working well. So I added some music, installed some apps to test whether it works perfectly fine or not. For osme amoutn of music it worked. After a day or two, I thought that the card issue is fixed and so I copied all of my music that I need in my phone (about 5.5GB). When I reinserted the card with all my music, it stopped working. Same as case (i).
I tried resetting the device with the card inside, still the same issue.
Any kind of help is much appreciated.
Thank you.
Edit: I tried copying everything while the card was still in the phone. In that case, it could only copy a maximum of 186items at one go. So I copied in batches of 100. After copying, it worked fine as long as I launched the xbox music app, after which the same old "About removing the SD Card" message showed up again.

Hi, arkeyve. Welcome to Microsoft Mobile Community. Have you tried using a different memory card on your phone? You may check the recommended memory cards that you can use on this link: What types of memory cards can I use with my Lumia?. Let know the outcome.

Similar Messages

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My  ipod classic just stopped working.  Will not turn on, will not do anything.  Black screen.  It is still under warranty.  What do I do to get it fixed or replaced?

    My ipod classis just stopped working.  It is still under warranty and I need to know where the warranty information is so I can get it fixed or replaced?

    If you have tried all of the suggestions mentioned under the appropriate section in this Apple support document, you may need to have your iPod serviced or replaced either by Apple or a third party service. 
    iPod won't turn on
    If the iPod is still under Apple's 1 year warranty against manufacturing defects, Apple may swap it out for you at no cost if they don't conclude the issue to be the result of abuse or accidental damage.  If you have an Apple Store nearby schedule an appointment with them and show them what you are experiencing.
    http://www.apple.com/retail/geniusbar/
    B-rock

  • "New" has stopped working

    In JDev 3.1, "New" (class) has stopped working. I've tried class, frame, applet and not work now. I've restarted Jdev and it still happens.
    The dialog with applet, frame, class, etc does come up, but after I select one and click OK, nothing happens.
    How do I turn it on?
    P.S. The dialog needs an "interface" creation "wizard".

    Found it. Didnt have "root source directories" in project properties defined.

  • SanDisk 32GB-card not working on ZiiO7

    I know that many users have had problems with 32GB SD-cards on the ZiiO7.
    To prevent any problems i checked the list of compatible micro-SD cards before I bought one:
    http://support.creative.com/kb/showa...aspx?sid=91809
    I bought a SanDisk 32GB card, SDSDQM-032G-B35N, that is supposed to work on the ZiiO7.
    The card DOES NOT WORK!!! It works perfectly on my phone and on my computer, but the ZiiO
    will not recognise it. Right now I am just furious that Creative made such a crappy product as the
    ZiiO 7 and I am pretty sure that Creative cant find its own ass even with the help of both hands.
    The list is incorrect and because of it I have paid much money for a SD-card that is not compatible
    with my tablet. Thanks a lot!!! :-(

    Please try to power down and then power up again the ZiiO tablet for the microSD to be detected properly.
    God never made his work for man to mend vmware_happy.gif

  • I've been using InDesign for class.  Now it "stops working" when I try to apply text and closes out

    I've been using InDesign for class.  Now I'm trying to do a newsletter for assignment and it keeps "stop working" and closes out the program.

    What Operating System? Is ID patched to version 8.0.2 (the patch was released last week). Do you have a Font Manager?
    Have you tried replacing your preferences? See Replace Your Preferences

  • Sound stopped working

    Hi.
    It used to work.
    I have problem with sound. Yesterday It does work, but today it stopped working. I'm not sure if it is because of some updates, I haven't noticed anything connected to sound. The only difference is that I uninstalled mplayer2. Then it stopped working - but I'm not sure if it was because of this.
    I tried:
    reinstall alsa, alsa-plugins, alsa-utils, vlc, mplayer2
    install pulseaudio, oss (without configuration)
    reboot
    unmute all chanels in alsamixer
    connecting headphones
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    lspci|grep -i audio
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
    lsmod|grep '^snd'|column -t
    snd_hda_codec_hdmi 27857 1
    snd_hda_codec_realtek 62279 1
    snd_hda_intel 33946 0
    snd_hda_codec 101474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6364 1 snd_hda_codec
    snd_pcm 76956 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18687 1 snd_pcm
    snd 58893 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    pacman -Q |egrep -wi --color 'vlc|audio|alsa|mplayer2|oss|pulse|sound'
    alsa-lib 1.0.27-1
    alsa-plug]alsa-lib 1.0.27-1
    alsa-plugins 1.0.27-1
    alsa-utils 1.0.27-4
    lib32-alsa-lib 1.0.27-1ins 1.0.27-1
    alsa-utils 1.0.27-4
    lib32-alsa-lib 1.0.27-1
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 06XK 03/16/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask F80000000 write-back
    [ 0.000000] 6 base 180000000 mask FE0000000 write-back
    [ 0.000000] 7 base 19FE00000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
    [ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x19fdfffff]
    [ 0.000000] [mem 0x100000000-0x19fdfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x19fdfffff @ [mem 0xd9c9b000-0xd9c9efff]
    [ 0.000000] RAMDISK: [mem 0x37a50000-0x37d1ffff]
    [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000daffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000daff2000 0803C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000daf47000 00040
    [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
    [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000dafe7000 0022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fdfffff]
    [ 0.000000] NODE_DATA [mem 0x19fdfb000-0x19fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199400000-ffff88019f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x19fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
    [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x19fdfffff]
    [ 0.000000] On node 0 totalpages: 1545773
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 141 pages reserved
    [ 0.000000] DMA zone: 3776 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13859 pages used for memmap
    [ 0.000000] DMA32 zone: 873085 pages, LIFO batch:31
    [ 0.000000] Normal zone: 10232 pages used for memmap
    [ 0.000000] Normal zone: 644616 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    [ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
    [ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
    [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fa00000 s85184 r8192 d21312 u262144
    [ 0.000000] pcpu-alloc: s85184 r8192 d21312 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1521477
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 6002944k/6813696k available (4908k kernel code, 630604k absent, 180148k reserved, 4024k data, 820k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.383 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.79 BogoMIPS (lpj=5321276)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000038] Security Framework initialized
    [ 0.000045] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002565] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003415] Mount-cache hash table entries: 256
    [ 0.003607] Initializing cgroup subsys cpuacct
    [ 0.003609] Initializing cgroup subsys memory
    [ 0.003616] Initializing cgroup subsys devices
    [ 0.003618] Initializing cgroup subsys freezer
    [ 0.003620] Initializing cgroup subsys net_cls
    [ 0.003622] Initializing cgroup subsys blkio
    [ 0.003647] Disabled fast string operations
    [ 0.003649] CPU: Physical Processor ID: 0
    [ 0.003650] CPU: Processor Core ID: 0
    [ 0.003655] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003658] mce: CPU supports 7 MCE banks
    [ 0.003671] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003677] process: using mwait in idle threads
    [ 0.003681] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 5
    [ 0.003835] Freeing SMP alternatives: 20k freed
    [ 0.004849] ACPI: Core revision 20121018
    [ 0.011331] ftrace: allocating 19310 entries in 76 pages
    [ 0.022372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055356] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.055365] TSC deadline timer enabled
    [ 0.055369] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.055376] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.055378] ... version: 3
    [ 0.055379] ... bit width: 48
    [ 0.055380] ... generic registers: 4
    [ 0.055381] ... value mask: 0000ffffffffffff
    [ 0.055382] ... max period: 000000007fffffff
    [ 0.055383] ... fixed-purpose events: 3
    [ 0.055384] ... event mask: 000000070000000f
    [ 0.093170] Disabled fast string operations
    [ 0.095374] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.113177] Disabled fast string operations
    [ 0.126599] Disabled fast string operations
    [ 0.082145] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.128712] Brought up 4 CPUs
    [ 0.128716] smpboot: Total of 4 processors activated (12776.19 BogoMIPS)
    [ 0.132574] devtmpfs: initialized
    [ 0.133773] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
    [ 0.134524] RTC time: 14:38:00, date: 04/23/13
    [ 0.134565] NET: Registered protocol family 16
    [ 0.134701] ACPI: bus type pci registered
    [ 0.134776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.134779] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.142122] PCI: Using configuration type 1 for base access
    [ 0.142308] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.142309] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.142310] mtrr: corrected configuration.
    [ 0.142733] bio: create slab <bio-0> at 0
    [ 0.142794] ACPI: Added _OSI(Module Device)
    [ 0.142795] ACPI: Added _OSI(Processor Device)
    [ 0.142797] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.142798] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.144238] ACPI: EC: Look up EC in DSDT
    [ 0.145725] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.148149] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.149385] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.149747] ACPI: Dynamic OEM Table Load:
    [ 0.149750] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.150021] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.150411] ACPI: Dynamic OEM Table Load:
    [ 0.150414] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.150533] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.150890] ACPI: Dynamic OEM Table Load:
    [ 0.150892] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.152416] ACPI: Interpreter enabled
    [ 0.152421] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.152442] ACPI: Using IOAPIC for interrupt routing
    [ 0.159354] ACPI: Power Resource [FN00] (off)
    [ 0.159432] ACPI: Power Resource [FN01] (off)
    [ 0.159506] ACPI: Power Resource [FN02] (off)
    [ 0.159581] ACPI: Power Resource [FN03] (off)
    [ 0.159654] ACPI: Power Resource [FN04] (off)
    [ 0.159950] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.160074] ACPI: No dock devices found.
    [ 0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.160290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.160292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.160531] \_SB_.PCI0:_OSC invalid UUID
    [ 0.160532] _OSC request data:1 8 1f
    [ 0.160943] PCI host bridge to bus 0000:00
    [ 0.160946] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.160949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.160951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.160952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.160954] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.160956] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.160965] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.161009] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 0.161021] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.161028] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.161033] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
    [ 0.161093] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.161118] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
    [ 0.161201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.161240] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.161264] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
    [ 0.161361] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.161391] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.161408] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
    [ 0.161483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.161509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.161596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.161628] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 0.161714] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.161746] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
    [ 0.161876] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.161921] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.161945] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
    [ 0.162042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.162072] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 0.162207] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 0.162228] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
    [ 0.162236] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
    [ 0.162245] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
    [ 0.162254] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
    [ 0.162263] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
    [ 0.162272] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
    [ 0.162324] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.162346] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.162363] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
    [ 0.162392] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.162635] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
    [ 0.162815] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
    [ 0.163511] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.169202] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.169209] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.169339] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.169408] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.169530] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
    [ 0.169605] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
    [ 0.169935] pci 0000:02:00.0: supports D1 D2
    [ 0.169937] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.175788] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.175797] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.175816] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.175957] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
    [ 0.175995] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
    [ 0.176190] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.182448] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.182462] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.182529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.182568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.182598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.182726] \_SB_.PCI0:_OSC invalid UUID
    [ 0.182727] _OSC request data:1 1f 1f
    [ 0.182731] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.182732] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.183395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.183442] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.183487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.183530] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.183573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
    [ 0.183616] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.183662] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.183709] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
    [ 0.183797] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.183801] vgaarb: loaded
    [ 0.183802] vgaarb: bridge control possible 0000:00:02.0
    [ 0.183834] PCI: Using ACPI for IRQ routing
    [ 0.185498] PCI: pci_cache_line_size set to 64 bytes
    [ 0.185611] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.185613] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
    [ 0.185615] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
    [ 0.185616] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff]
    [ 0.185709] NetLabel: Initializing
    [ 0.185711] NetLabel: domain hash size = 128
    [ 0.185712] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.185729] NetLabel: unlabeled traffic allowed by default
    [ 0.185745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.185750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.187760] Switching to clocksource hpet
    [ 0.192350] pnp: PnP ACPI init
    [ 0.192366] ACPI: bus type pnp registered
    [ 0.192633] pnp 00:00: [dma 4]
    [ 0.192731] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.192753] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.192844] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.192878] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.192924] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.192927] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.192929] system 00:04: [io 0x5000-0x5003] has been reserved
    [ 0.192931] system 00:04: [io 0xffff] has been reserved
    [ 0.192932] system 00:04: [io 0x0400-0x0453] has been reserved
    [ 0.192938] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.192940] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.192942] system 00:04: [io 0x0a00-0x0a0f] has been reserved
    [ 0.192944] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.192946] system 00:04: [io 0x5000-0x500f] could not be reserved
    [ 0.192949] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.192975] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.193023] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.193027] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.193068] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.193112] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
    [ 0.193267] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.193270] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.193272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.193274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.193276] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.193278] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.193280] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.193282] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.193284] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.193286] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.193288] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.193629] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20121018/utresrc-650)
    [ 0.193634] pnp 00:0a: can't evaluate _CRS: 12311
    [ 0.193738] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.193762] pnp: PnP ACPI: found 11 devices
    [ 0.193764] ACPI: ACPI bus type pnp unregistered
    [ 0.200460] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.200467] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.200477] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.200481] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.200489] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.200497] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.200503] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.200541] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.200543] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.200545] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.200546] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.200548] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.200550] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
    [ 0.200552] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.200554] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.200556] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.200587] NET: Registered protocol family 2
    [ 0.200783] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.201021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.201188] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.201218] TCP: reno registered
    [ 0.201232] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.201269] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.201357] NET: Registered protocol family 1
    [ 0.201372] pci 0000:00:02.0: Boot video device
    [ 0.201548] PCI: CLS 64 bytes, default 64
    [ 0.201591] Unpacking initramfs...
    [ 0.261406] Freeing initrd memory: 2880k freed
    [ 0.261899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.261905] software IO TLB [mem 0xd5c9b000-0xd9c9b000] (64MB) mapped at [ffff8800d5c9b000-ffff8800d9c9afff]
    [ 0.262304] audit: initializing netlink socket (disabled)
    [ 0.262319] type=2000 audit(1366727880.259:1): initialized
    [ 0.276840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.278407] VFS: Disk quotas dquot_6.5.2
    [ 0.278450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.278614] msgmni has been set to 11730
    [ 0.278836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.278888] io scheduler noop registered
    [ 0.278891] io scheduler deadline registered
    [ 0.278897] io scheduler cfq registered (default)
    [ 0.279146] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.279147] vesafb: scrolling: redraw
    [ 0.279149] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.279531] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
    [ 0.344149] Console: switching to colour frame buffer device 128x48
    [ 0.408701] fb0: VESA VGA frame buffer device
    [ 0.408712] intel_idle: MWAIT substates: 0x21120
    [ 0.408714] intel_idle: v0.4 model 0x2A
    [ 0.408715] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.408750] GHES: HEST is not enabled!
    [ 0.408800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.409237] Linux agpgart interface v0.103
    [ 0.409304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
    [ 0.416404] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.416417] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.416540] mousedev: PS/2 mouse device common for all mice
    [ 0.416900] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.416930] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.417022] cpuidle: using governor ladder
    [ 0.417127] cpuidle: using governor menu
    [ 0.417129] EFI Variables Facility v0.08 2004-May-17
    [ 0.417180] drop_monitor: Initializing network drop monitor service
    [ 0.417252] TCP: cubic registered
    [ 0.417348] NET: Registered protocol family 10
    [ 0.417495] NET: Registered protocol family 17
    [ 0.417505] Key type dns_resolver registered
    [ 0.417796] PM: Hibernation image not present or could not be loaded.
    [ 0.417805] registered taskstats version 1
    [ 0.418395] Magic number: 9:780:637
    [ 0.418468] rtc_cmos 00:05: setting system clock to 2013-04-23 14:38:01 UTC (1366727881)
    [ 0.420125] Freeing unused kernel memory: 820k freed
    [ 0.420254] Write protecting the kernel read-only data: 8192k
    [ 0.423156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.424428] Freeing unused kernel memory: 1224k freed
    [ 0.425960] Freeing unused kernel memory: 440k freed
    [ 0.433142] systemd-udevd[57]: starting version 201
    [ 0.458283] ACPI: bus type usb registered
    [ 0.458349] usbcore: registered new interface driver usbfs
    [ 0.458370] usbcore: registered new interface driver hub
    [ 0.458506] usbcore: registered new device driver usb
    [ 0.458848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.458984] ehci-pci: EHCI PCI platform driver
    [ 0.459037] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.459041] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.459047] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.459062] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.462962] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.462983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
    [ 0.463303] SCSI subsystem initialized
    [ 0.464366] ACPI: bus type scsi registered
    [ 0.464443] libata version 3.00 loaded.
    [ 0.464501] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.464512] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
    [ 0.470946] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.471264] hub 1-0:1.0: USB hub found
    [ 0.471272] hub 1-0:1.0: 2 ports detected
    [ 0.471541] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.471545] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.471551] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.471576] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.475501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.475524] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
    [ 0.484257] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.484616] hub 3-0:1.0: USB hub found
    [ 0.484625] hub 3-0:1.0: 2 ports detected
    [ 0.484916] ahci 0000:00:1f.2: version 3.0
    [ 0.485018] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    [ 0.485078] ahci: SSS flag set, parallel bus scan disabled
    [ 0.485142] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
    [ 0.485145] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 0.485152] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.498266] scsi0 : ahci
    [ 0.498400] scsi1 : ahci
    [ 0.498501] scsi2 : ahci
    [ 0.498607] scsi3 : ahci
    [ 0.498716] scsi4 : ahci
    [ 0.498823] scsi5 : ahci
    [ 0.498879] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
    [ 0.498883] ata2: DUMMY
    [ 0.498885] ata3: DUMMY
    [ 0.498888] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
    [ 0.498891] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
    [ 0.498893] ata6: DUMMY
    [ 0.527671] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
    [ 0.527678] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
    [ 0.527683] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 0.527688] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 0.527693] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 0.527949] xHCI xhci_add_endpoint called for root hub
    [ 0.527951] xHCI xhci_check_bandwidth called for root hub
    [ 0.527980] hub 2-0:1.0: USB hub found
    [ 0.527988] hub 2-0:1.0: 2 ports detected
    [ 0.528084] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.528088] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
    [ 0.528278] xHCI xhci_add_endpoint called for root hub
    [ 0.528282] xHCI xhci_check_bandwidth called for root hub
    [ 0.528325] hub 4-0:1.0: USB hub found
    [ 0.528336] hub 4-0:1.0: 2 ports detected
    [ 0.777504] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.817457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.818156] ata1.00: ATA-9: SAMSUNG MZ7PC128HAFU-000, CXM02K1Q, max UDMA/133
    [ 0.818173] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.818687] ata1.00: configured for UDMA/133
    [ 0.818930] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PC128 CXM0 PQ: 0 ANSI: 5
    [ 0.901417] hub 1-1:1.0: USB hub found
    [ 0.901487] hub 1-1:1.0: 6 ports detected
    [ 1.007327] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.131530] hub 3-1:1.0: USB hub found
    [ 1.131707] hub 3-1:1.0: 6 ports detected
    [ 1.137166] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.210698] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.263792] tsc: Refined TSC clocksource calibration: 1596.373 MHz
    [ 1.263808] Switching to clocksource tsc
    [ 1.456959] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.460046] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.460135] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.460139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.460170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.461145] sda: sda1 sda2 sda3 sda4 < sda5 >
    [ 1.461569] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.668989] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.706891] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
    [ 1.790244] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 1.791051] systemd[1]: Set hostname to <530uarch>.
    [ 1.859141] systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory. See system logs and 'systemctl status ntpd.service' for details.
    [ 1.859155] systemd[1]: Cannot add dependency job for unit laptop-mode.service, ignoring: Unit laptop-mode.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode.service' for details.
    [ 1.859170] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 1.859349] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.859395] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.859406] systemd[1]: Starting Remote File Systems.
    [ 1.859417] systemd[1]: Reached target Remote File Systems.
    [ 1.859425] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
    [ 1.859434] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.859461] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.859468] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.859487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.859494] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.859516] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.859524] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.859547] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.859558] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.859587] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.859595] systemd[1]: Starting Paths.
    [ 1.859603] systemd[1]: Reached target Paths.
    [ 1.859626] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.859714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.859722] systemd[1]: Starting Encrypted Volumes.
    [ 1.859731] systemd[1]: Reached target Encrypted Volumes.
    [ 1.859784] systemd[1]: Starting udev Kernel Socket.
    [ 1.859803] systemd[1]: Listening on udev Kernel Socket.
    [ 1.859845] systemd[1]: Starting udev Control Socket.
    [ 1.859868] systemd[1]: Listening on udev Control Socket.
    [ 1.859877] systemd[1]: Starting Journal Socket.
    [ 1.859912] systemd[1]: Listening on Journal Socket.
    [ 1.859945] systemd[1]: Mounting Huge Pages File System...
    [ 1.893494] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.898344] systemd[1]: Started Load Kernel Modules.
    [ 1.898365] systemd[1]: Mounted FUSE Control File System.
    [ 1.899753] systemd[1]: Starting Apply Kernel Variables...
    [ 1.923663] systemd[1]: Mounting Configuration File System...
    [ 1.930086] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.936854] systemd[1]: Starting Journal Service...
    [ 1.950121] systemd[1]: Started Journal Service.
    [ 1.950178] systemd[1]: Starting Setup Virtual Console...
    [ 1.960089] systemd[1]: Starting Create static device nodes in /dev...
    [ 1.967386] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.967414] systemd[1]: Mounting Debug File System...
    [ 1.976595] systemd[1]: Starting Swap.
    [ 1.976618] systemd[1]: Reached target Swap.
    [ 1.976647] systemd[1]: Mounting Temporary Directory...
    [ 2.023332] systemd[1]: Started File System Check on Root Device.
    [ 2.023347] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 2.060070] systemd[1]: Expecting device dev-disk-by\x2duuid-1166c42d\x2dd01a\x2d40bf\x2d8926\x2d2795b3f0b834.device...
    [ 2.060097] systemd[1]: Expecting device dev-disk-by\x2duuid-C332\x2d535C.device...
    [ 2.060597] systemd[1]: Mounted Huge Pages File System.
    [ 2.060732] systemd[1]: Mounted POSIX Message Queue File System.
    [ 2.062885] EXT4-fs (sda1): re-mounted. Opts: commit=15,data=ordered,discard
    [ 2.079953] systemd[1]: Started Apply Kernel Variables.
    [ 2.080081] systemd[1]: Mounted Configuration File System.
    [ 2.091845] systemd[1]: Started Setup Virtual Console.
    [ 2.093312] systemd[1]: Started Create static device nodes in /dev.
    [ 2.093419] systemd[1]: Mounted Debug File System.
    [ 2.093493] systemd[1]: Mounted Temporary Directory.
    [ 2.093753] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 2.106639] systemd[1]: Started udev Coldplug all Devices.
    [ 2.106691] systemd[1]: Starting Load Random Seed...
    [ 2.113536] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.119903] systemd[1]: Started Load Random Seed.
    [ 2.122479] systemd-udevd[142]: starting version 202
    [ 2.126885] systemd[1]: Started udev Kernel Device Manager.
    [ 2.126941] systemd[1]: Starting Local File Systems (Pre).
    [ 2.126955] systemd[1]: Reached target Local File Systems (Pre).
    [ 2.182697] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
    [ 2.182707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182713] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182720] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182733] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.183607] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.184967] ACPI: Requesting acpi_cpufreq
    [ 2.187346] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 2.187393] ACPI: Lid Switch [LID0]
    [ 2.187480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 2.187487] ACPI: Power Button [PWRB]
    [ 2.190425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.190433] ACPI: Power Button [PWRF]
    [ 2.191578] mei 0000:00:16.0: setting latency timer to 64
    [ 2.191674] mei 0000:00:16.0: irq 46 for MSI/MSI-X
    [ 2.198369] [drm] Initialized drm 1.1.0 20060810
    [ 2.198487] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
    [ 2.198496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.207287] ACPI: Battery Slot [BAT1] (battery present)
    [ 2.210635] ACPI: Fan [FAN0] (off)
    [ 2.210696] ACPI: Fan [FAN1] (off)
    [ 2.210754] ACPI: Fan [FAN2] (off)
    [ 2.210806] ACPI: Fan [FAN3] (off)
    [ 2.210877] ACPI: Fan [FAN4] (off)
    [ 2.211218] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 2.213278] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.213283] ACPI: Thermal Zone [TZ00] (61 C)
    [ 2.214137] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.214139] ACPI: Thermal Zone [TZ01] (30 C)
    [ 2.231486] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.231742] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.236625] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.236988] r8169 0000:02:00.0: irq 48 for MSI/MSI-X
    [ 2.237512] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004ef8000, e8:03:9a:97:b5:a7, XID 0c900800 IRQ 48
    [ 2.237516] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.254854] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.258073] samsung_laptop: detected SABI interface: SwSmi@
    [ 2.258077] samsung_laptop: Backlight controlled by ACPI video driver
    [ 2.271599] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.271604] Copyright(c) 2003-2012 Intel Corporation
    [ 2.272199] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
    [ 2.273865] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 2.274238] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.274354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.276284] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
    [ 2.276358] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
    [ 2.276360] systemd[1]: Starting File System Check on /dev/disk/by-uuid/1166c42d-d01a-40bf-8926-2795b3f0b834...
    [ 2.277330] [drm] Memory usable by graphics device = 2048M
    [ 2.277337] checking generic (e0000000 300000) vs hw (e0000000 10000000)
    [ 2.277340] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 2.277356] Console: switching to colour dummy device 80x25
    [ 2.277856] i915 0000:00:02.0: setting latency timer to 64
    [ 2.293728] iTCO_vendor_support: vendor-support=0
    [ 2.294474] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.295948] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.296080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.296784] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.296789] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.296792] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.296794] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
    [ 2.296797] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
    [ 2.296800] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
    [ 2.297034] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 2.309676] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
    [ 2.309725] systemd[1]: Mounting /mnt/shard...
    [ 2.315045] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.326398] i915 0000:00:02.0: irq 50 for MSI/MSI-X
    [ 2.326694] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.326697] [drm] Driver supports precise vblank timestamp query.
    [ 2.326780] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.329470] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.335638] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.339306] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.339922] systemd[1]: Starting Sound Card.
    [ 2.339944] systemd[1]: Reached target Sound Card.
    [ 2.344210] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.353017] systemd-udevd[151]: renamed network interface eth0 to enp2s0
    [ 2.356365] systemd-udevd[152]: renamed network interface wlan0 to wlp1s0
    [ 2.359280] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [ 2.403861] fbcon: inteldrmfb (fb0) is primary device
    [ 2.412172] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: commit=15,data=ordered,discard
    [ 2.523824] usb 3-1.5: USB disconnect, device number 3
    [ 2.608485] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 2.615267] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
    [ 2.885607] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
    [ 2.900591] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
    [ 2.975438] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
    [ 3.013202] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 3.020042] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
    [ 3.252446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
    [ 3.415660] Console: switching to colour frame buffer device 170x48
    [ 3.424244] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.424247] i915 0000:00:02.0: registered panic notifier
    [ 3.436609] acpi device:32: registered as cooling_device9
    [ 3.436968] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 3.437019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [ 3.437169] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 3.496648] Non-volatile memory driver v1.3
    [ 3.963276] Bluetooth: Core ver 2.16
    [ 3.963296] NET: Registered protocol family 31
    [ 3.963298] Bluetooth: HCI device and connection manager initialized
    [ 3.963305] Bluetooth: HCI socket layer initialized
    [ 3.963307] Bluetooth: L2CAP socket layer initialized
    [ 3.963313] Bluetooth: SCO socket layer initialized
    [ 3.964708] usbcore: registered new interface driver btusb
    [ 4.338375] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4.468607] media: Linux media interface: v0.10
    [ 4.471891] Linux video capture interface: v2.00
    [ 4.518478] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
    [ 4.537926] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
    [ 4.538078] usbcore: registered new interface driver uvcvideo
    [ 4.538083] USB Video Class driver (1.1.1)
    [ 6.473768] wlp1s0: authenticate with 00:24:8c:eb:ff:66
    [ 6.480100] wlp1s0: send auth to 00:24:8c:eb:ff:66 (try 1/3)
    [ 6.482750] wlp1s0: authenticated
    [ 6.483074] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
    [ 6.483084] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 6.483367] wlp1s0: associate with 00:24:8c:eb:ff:66 (try 1/3)
    [ 6.486701] wlp1s0: RX AssocResp from 00:24:8c:eb:ff:66 (capab=0x431 status=0 aid=2)
    [ 6.496708] wlp1s0: associated
    [ 6.496833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
    [ 6.534112] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:24:8c:eb:ff:66
    [ 776.460690] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 776.473529] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 969.874854] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 969.887746] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 1061.757868] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 1061.790334] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 1346.112078] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 1346.143576] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 2241.768058] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 2241.780927] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 2341.444767] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 2341.479230] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    cat /etc/asound.conf (which was working)
    defaults.pcm.card 0
    defaults.pcm.device 0
    defaults.ctl.card 0
    Trying to play a file:
    mplayer Music/Arctic\ Monkeys/Favourite\ Most\ Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3
    MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
    [ass] FcFreeTypeQueryFace failed
    Cannot open file '/home/dan/.mplayer/input.conf': No such file or directory
    Failed to open /home/dan/.mplayer/input.conf.
    Can't open joystick device /dev/input/js0: No such file or directory
    Can't init input joystick
    Playing Music/Arctic Monkeys/Favourite Most Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3.
    Detected file format: MP2/3 (MPEG audio layer 2/3) (libavformat)
    [mp3 @ 0x7f7b7e07d760]max_analyze_duration 5000000 reached at 5015510 microseconds
    [lavf] stream 0: audio (mp3), -aid 0
    Clip info:
    title: teddy picker
    artist: Arctic Monkeys
    album: Favourite Worst Nightmare
    track: 2
    language: German
    genre: Rock
    encoded_by: LAME 3.97
    date: 2007
    Load subtitles in Music/Arctic Monkeys/Favourite Most Nightmare/
    Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
    AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
    AO: [pulse] Init failed: Connection refused
    AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
    Video: no video
    Starting playback...
    A: 1.9 (01.8) of 163.2 (02:43.1) 1.6%
    aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    speaker-test -c 2
    speaker-test 1.0.27
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 16384
    Period size range from 1024 to 1024
    Using max buffer size 16384
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 16384
    0 - Front Left
    1 - Front Right
    Time per period = 5.651455
    Last edited by Kotrfa (2013-04-23 15:32:42)

    Same for me after system upgrade on 2013-05-01:
    pacmatic -Syu
    Since then, no Audio output via HDMI anymore. Mainboard is Intel DH67BL.
    Before upgrade, it worked. Audio via normal audio connector also still works.
    $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
    But on the connected (via HDMI) TV is nothing to hear. Video on TV via HDMI works. Checked also alsamixer volume setting.
    With this, I hear the sound on the speakers connected with the Mainboard:
    $ aplay /usr/share/sounds/alsa/Front_Center.wav
    Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
    $ aplay -l
    **** Liste der Hardware-Geräte (PLAYBACK) ****
    Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    $ lsmod | grep snd
    snd_hda_codec_hdmi 24877 1
    snd_hda_codec_realtek 53315 1
    snd_hda_intel 28850 1
    snd_hda_codec 87310 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 4746 1 snd_hda_codec
    snd_pcm 62851 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
    snd_timer 14846 1 snd_pcm
    snd 44486 9 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 4386 1 snd
    $ cat /proc/asound/modules
    0 snd_hda_intel
    I've read this, but did not help:
    https://wiki.archlinux.org/index.php/Ta … chitecture
    Here the list of upgraded packages:
    grep 2013-05-01.*pgraded /var/log/pacman.log
    http://pastebin.com/vXjp3Bw4
    I also downgraded to the kernel version before upgrade:
    pacman -U /var/cache/pacman/pkg/linux-3.7.4-1-i686.pkg.tar.xz
    But that did not solve the problem. Also using linux-lts kernel did not help.
    I have posted this also on the german Arch Linux board:
    https://bbs.archlinux.de/viewtopic.php?id=23955
    Last edited by 1970 (2013-05-06 05:23:59)

  • DFS replication stopped working and cannot be debugged because WMI repository cannot be accessed

    Hello,
    two days ago our DFS replication suddendly stopped working sometime around midnight local time. At least this is what our second domain controller is reporting. Event log is flooded with event id 5002 from DFSR. It is unclear what caused this sudden problem
    and even worse, how to solve it. First thing I tried was to perform propagation tests. According to propagation report none of them was successful. Creating an integrity report brought me to another problem: It fails with two errors. First it is unable to
    connect to the other DC. Second it is unable to access local WMI repository. This is true for both machines.
    First I tried to find information on possible problems with WMI. WMIdiag provided a lot of information. However, opinions I found on the net largely disagree whether output from WMIdiag is useful or not. Yet I tried to re-compile .mof files and rebuild the
    repository. So far, nothing changed. This is my output from WMIdiag:
    34309 13:02:46 (0) ** WMIDiag v2.1 started on Donnerstag, 22. Mai 2014 at 12:49.
    34310 13:02:46 (0) **
    34311 13:02:46 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
    34312 13:02:46 (0) **
    34313 13:02:46 (0) ** This script is not supported under any Microsoft standard support program or service.
    34314 13:02:46 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
    34315 13:02:46 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
    34316 13:02:46 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
    34317 13:02:46 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
    34318 13:02:46 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
    34319 13:02:46 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
    34320 13:02:46 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
    34321 13:02:46 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
    34322 13:02:46 (0) ** of the possibility of such damages.
    34323 13:02:46 (0) **
    34324 13:02:46 (0) **
    34325 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34326 13:02:46 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
    34327 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34328 13:02:46 (0) **
    34329 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34330 13:02:46 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'COM\ABCDEF' on computer 'DC2'.
    34331 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34332 13:02:46 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
    34333 13:02:46 (0) ** INFO: => 1 possible incorrect shutdown(s) detected on:
    34334 13:02:46 (0) ** - Shutdown on 01 April 2014 10:20:54 (GMT-0).
    34335 13:02:46 (0) **
    34336 13:02:46 (0) ** System drive: ....................................................................................................... C: (Datenträgernr. 0 Partitionsnr. 1).
    34337 13:02:46 (0) ** Drive type: ......................................................................................................... SCSI (Adaptec Array SCSI Disk Device).
    34338 13:02:46 (0) ** There are no missing WMI system files: .............................................................................. OK.
    34339 13:02:46 (0) ** There are no missing WMI repository files: .......................................................................... OK.
    34340 13:02:46 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
    34341 13:02:46 (0) ** AFTER running WMIDiag:
    34342 13:02:46 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
    34343 13:02:46 (0) ** - Disk free space on 'C:': .......................................................................................... 10665 MB.
    34344 13:02:46 (0) ** - INDEX.BTR, 4276224 bytes, 22.05.2014 12:52:30
    34345 13:02:46 (0) ** - MAPPING1.MAP, 67248 bytes, 22.05.2014 12:52:30
    34346 13:02:46 (0) ** - MAPPING2.MAP, 67168 bytes, 22.05.2014 12:48:33
    34347 13:02:46 (0) ** - OBJECTS.DATA, 23126016 bytes, 22.05.2014 12:52:30
    34348 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34349 13:02:46 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
    34350 13:02:46 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
    34351 13:02:46 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
    34352 13:02:46 (0) ** => This will prevent any WMI remote connectivity to this computer except
    34353 13:02:46 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
    34354 13:02:46 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
    34355 13:02:46 (0) ** - 'Windows Management Instrumentation (WMI-In)'
    34356 13:02:46 (0) ** - 'Windows Management Instrumentation (ASync-In)'
    34357 13:02:46 (0) ** Verify the reported status for each of these three inbound rules below.
    34358 13:02:46 (0) **
    34359 13:02:46 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
    34360 13:02:46 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
    34361 13:02:46 (0) ** - You can adjust the configuration by executing the following command:
    34362 13:02:46 (0) ** i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
    34363 13:02:46 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
    34364 13:02:46 (0) ** You can also enable each individual rule instead of activating the group rule.
    34365 13:02:46 (0) **
    34366 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34367 13:02:46 (0) ** DCOM Status: ........................................................................................................ OK.
    34368 13:02:46 (0) ** WMI registry setup: ................................................................................................. OK.
    34369 13:02:46 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
    34370 13:02:46 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
    34371 13:02:46 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
    34372 13:02:46 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
    34373 13:02:46 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
    34374 13:02:46 (0) ** this can prevent the service/application to work as expected.
    34375 13:02:46 (0) **
    34376 13:02:46 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
    34377 13:02:46 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
    34378 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34379 13:02:46 (0) ** WMI service DCOM setup: ............................................................................................. OK.
    34380 13:02:46 (0) ** WMI components DCOM registrations: .................................................................................. OK.
    34381 13:02:46 (0) ** WMI ProgID registrations: ........................................................................................... OK.
    34382 13:02:46 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
    34383 13:02:46 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
    34384 13:02:46 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
    34385 13:02:46 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 1 WARNING(S)!
    34386 13:02:46 (0) ** - ROOT/MICROSOFTACTIVEDIRECTORY, ReplProv1, replprov.dll
    34387 13:02:46 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
    34388 13:02:46 (0) ** This can be due to:
    34389 13:02:46 (0) ** - the de-installation of the software.
    34390 13:02:46 (0) ** - the deletion of some files.
    34391 13:02:46 (0) ** => If the software has been de-installed intentionally, then this information must be
    34392 13:02:46 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
    34393 13:02:46 (0) ** the provider registration data.
    34394 13:02:46 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\MICROSOFTACTIVEDIRECTORY path __Win32Provider Where Name='ReplProv1' DELETE'
    34395 13:02:46 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
    34396 13:02:46 (0) ** You can retrieve the missing file from:
    34397 13:02:46 (0) ** - A backup.
    34398 13:02:46 (0) ** - The Windows CD.
    34399 13:02:46 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
    34400 13:02:46 (0) ** - The original CD or software package installing this WMI provider.
    34401 13:02:46 (0) **
    34402 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34403 13:02:46 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
    34404 13:02:46 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
    34405 13:02:46 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
    34406 13:02:46 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
    34407 13:02:46 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
    34408 13:02:46 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
    34409 13:02:46 (0) **
    34410 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
    34411 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
    34412 13:02:46 (0) ** - REMOVED ACE:
    34413 13:02:46 (0) ** ACEType: &h0
    34414 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34415 13:02:46 (0) ** ACEFlags: &h0
    34416 13:02:46 (0) ** ACEMask: &h7
    34417 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34418 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
    34419 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
    34420 13:02:46 (0) **
    34421 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34422 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34423 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34424 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34425 13:02:46 (0) **
    34426 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
    34427 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
    34428 13:02:46 (0) ** - REMOVED ACE:
    34429 13:02:46 (0) ** ACEType: &h0
    34430 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34431 13:02:46 (0) ** ACEFlags: &h0
    34432 13:02:46 (0) ** ACEMask: &h7
    34433 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34434 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
    34435 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
    34436 13:02:46 (0) **
    34437 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34438 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34439 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34440 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34441 13:02:46 (0) **
    34442 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
    34443 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
    34444 13:02:46 (0) ** - REMOVED ACE:
    34445 13:02:46 (0) ** ACEType: &h0
    34446 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34447 13:02:46 (0) ** ACEFlags: &h0
    34448 13:02:46 (0) ** ACEMask: &h7
    34449 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34450 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
    34451 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
    34452 13:02:46 (0) **
    34453 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34454 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34455 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34456 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34457 13:02:46 (0) **
    34458 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
    34459 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
    34460 13:02:46 (0) ** - REMOVED ACE:
    34461 13:02:46 (0) ** ACEType: &h0
    34462 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34463 13:02:46 (0) ** ACEFlags: &h0
    34464 13:02:46 (0) ** ACEMask: &h1F
    34465 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34466 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34467 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34468 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34469 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34470 13:02:46 (0) **
    34471 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34472 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34473 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34474 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34475 13:02:46 (0) **
    34476 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
    34477 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
    34478 13:02:46 (0) ** - REMOVED ACE:
    34479 13:02:46 (0) ** ACEType: &h0
    34480 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34481 13:02:46 (0) ** ACEFlags: &h0
    34482 13:02:46 (0) ** ACEMask: &h1F
    34483 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34484 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34485 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34486 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34487 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34488 13:02:46 (0) **
    34489 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34490 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34491 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34492 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34493 13:02:46 (0) **
    34494 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
    34495 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
    34496 13:02:46 (0) ** - REMOVED ACE:
    34497 13:02:46 (0) ** ACEType: &h0
    34498 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34499 13:02:46 (0) ** ACEFlags: &h0
    34500 13:02:46 (0) ** ACEMask: &h1F
    34501 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34502 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34503 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34504 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34505 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34506 13:02:46 (0) **
    34507 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34508 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34509 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34510 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34511 13:02:46 (0) **
    34512 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
    34513 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
    34514 13:02:46 (0) ** - REMOVED ACE:
    34515 13:02:46 (0) ** ACEType: &h0
    34516 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34517 13:02:46 (0) ** ACEFlags: &h0
    34518 13:02:46 (0) ** ACEMask: &h1F
    34519 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34520 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34521 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34522 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34523 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34524 13:02:46 (0) **
    34525 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34526 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34527 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34528 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34529 13:02:46 (0) **
    34530 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
    34531 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
    34532 13:02:46 (0) ** - REMOVED ACE:
    34533 13:02:46 (0) ** ACEType: &h0
    34534 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34535 13:02:46 (0) ** ACEFlags: &h0
    34536 13:02:46 (0) ** ACEMask: &h1F
    34537 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34538 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34539 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34540 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34541 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34542 13:02:46 (0) **
    34543 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34544 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34545 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34546 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34547 13:02:46 (0) **
    34548 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
    34549 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
    34550 13:02:46 (0) ** - REMOVED ACE:
    34551 13:02:46 (0) ** ACEType: &h0
    34552 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34553 13:02:46 (0) ** ACEFlags: &h0
    34554 13:02:46 (0) ** ACEMask: &hB
    34555 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34556 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34557 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34558 13:02:46 (0) **
    34559 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34560 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34561 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34562 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34563 13:02:46 (0) **
    34564 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34565 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
    34566 13:02:46 (0) ** - REMOVED ACE:
    34567 13:02:46 (0) ** ACEType: &h0
    34568 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34569 13:02:46 (0) ** ACEFlags: &h0
    34570 13:02:46 (0) ** ACEMask: &h1F
    34571 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34572 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34573 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34574 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34575 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34576 13:02:46 (0) **
    34577 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34578 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34579 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34580 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34581 13:02:46 (0) **
    34582 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34583 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
    34584 13:02:46 (0) ** - REMOVED ACE:
    34585 13:02:46 (0) ** ACEType: &h0
    34586 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34587 13:02:46 (0) ** ACEFlags: &h0
    34588 13:02:46 (0) ** ACEMask: &h1F
    34589 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34590 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34591 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34592 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34593 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34594 13:02:46 (0) **
    34595 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34596 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34597 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34598 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34599 13:02:46 (0) **
    34600 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34601 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
    34602 13:02:46 (0) ** - REMOVED ACE:
    34603 13:02:46 (0) ** ACEType: &h0
    34604 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34605 13:02:46 (0) ** ACEFlags: &h0
    34606 13:02:46 (0) ** ACEMask: &h1F
    34607 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34608 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34609 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34610 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34611 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34612 13:02:46 (0) **
    34613 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34614 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34615 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34616 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34617 13:02:46 (0) **
    34618 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34619 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
    34620 13:02:46 (0) ** - REMOVED ACE:
    34621 13:02:46 (0) ** ACEType: &h0
    34622 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34623 13:02:46 (0) ** ACEFlags: &h0
    34624 13:02:46 (0) ** ACEMask: &h1F
    34625 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34626 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34627 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34628 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34629 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34630 13:02:46 (0) **
    34631 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34632 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34633 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34634 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34635 13:02:46 (0) **
    34636 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
    34637 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
    34638 13:02:46 (0) ** - REMOVED ACE:
    34639 13:02:46 (0) ** ACEType: &h0
    34640 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
    34641 13:02:46 (0) ** ACEFlags: &h0
    34642 13:02:46 (0) ** ACEMask: &h1F
    34643 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
    34644 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
    34645 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
    34646 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
    34647 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
    34648 13:02:46 (0) **
    34649 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
    34650 13:02:46 (0) ** Removing default security will cause some operations to fail!
    34651 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
    34652 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    34653 13:02:46 (0) **
    34654 13:02:46 (0) **
    34655 13:02:46 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
    34656 13:02:46 (0) ** DCOM security error(s) detected: .................................................................................... 14.
    34657 13:02:46 (0) ** WMI security warning(s) detected: ................................................................................... 0.
    34658 13:02:46 (0) ** WMI security error(s) detected: ..................................................................................... 0.
    34659 13:02:46 (0) **
    34660 13:02:46 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
    34661 13:02:46 (0) ** Overall WMI security status: ........................................................................................ OK.
    34662 13:02:46 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
    34663 13:02:46 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
    34664 13:02:46 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
    34665 13:02:46 (0) ** 'select * from MSFT_SCMEventLogEvent'
    34666 13:02:46 (0) **
    34667 13:02:46 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
    34668 13:02:46 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
    34669 13:02:46 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
    34670 13:02:46 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
    34671 13:02:46 (0) ** - ROOT/SERVICEMODEL.
    34672 13:02:46 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
    34673 13:02:46 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
    34674 13:02:46 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
    34675 13:02:46 (0) ** i.e. 'WMIC.EXE /NODE:"ISWDC2" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
    34676 13:02:46 (0) **
    34677 13:02:46 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
    34678 13:02:46 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
    34679 13:02:46 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 32 ERROR(S)!
    34680 13:02:46 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34681 13:02:46 (0) ** MOF Registration: ''
    34682 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34683 13:02:46 (0) ** MOF Registration: ''
    34684 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34685 13:02:46 (0) ** MOF Registration: ''
    34686 13:02:46 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34687 13:02:46 (0) ** MOF Registration: ''
    34688 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34689 13:02:46 (0) ** MOF Registration: ''
    34690 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34691 13:02:46 (0) ** MOF Registration: ''
    34692 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34693 13:02:46 (0) ** MOF Registration: ''
    34694 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34695 13:02:46 (0) ** MOF Registration: ''
    34696 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34697 13:02:46 (0) ** MOF Registration: ''
    34698 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34699 13:02:46 (0) ** MOF Registration: ''
    34700 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34701 13:02:46 (0) ** MOF Registration: ''
    34702 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34703 13:02:46 (0) ** MOF Registration: ''
    34704 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34705 13:02:46 (0) ** MOF Registration: ''
    34706 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34707 13:02:46 (0) ** MOF Registration: ''
    34708 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34709 13:02:46 (0) ** MOF Registration: ''
    34710 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34711 13:02:46 (0) ** MOF Registration: ''
    34712 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34713 13:02:46 (0) ** MOF Registration: ''
    34714 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34715 13:02:46 (0) ** MOF Registration: ''
    34716 13:02:46 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34717 13:02:46 (0) ** MOF Registration: ''
    34718 13:02:46 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34719 13:02:46 (0) ** MOF Registration: ''
    34720 13:02:46 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34721 13:02:46 (0) ** MOF Registration: ''
    34722 13:02:46 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34723 13:02:46 (0) ** MOF Registration: ''
    34724 13:02:46 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34725 13:02:46 (0) ** MOF Registration: ''
    34726 13:02:46 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34727 13:02:46 (0) ** MOF Registration: ''
    34728 13:02:46 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34729 13:02:46 (0) ** MOF Registration: ''
    34730 13:02:46 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34731 13:02:46 (0) ** MOF Registration: ''
    34732 13:02:46 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34733 13:02:46 (0) ** MOF Registration: ''
    34734 13:02:46 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34735 13:02:46 (0) ** MOF Registration: ''
    34736 13:02:46 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34737 13:02:46 (0) ** MOF Registration: ''
    34738 13:02:46 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34739 13:02:46 (0) ** MOF Registration: ''
    34740 13:02:46 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34741 13:02:46 (0) ** MOF Registration: ''
    34742 13:02:46 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    34743 13:02:46 (0) ** MOF Registration: ''
    34744 13:02:46 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
    34745 13:02:46 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
    34746 13:02:46 (0) ** You can refresh the WMI class provider buffer with the following command:
    34747 13:02:46 (0) **
    34748 13:02:46 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
    34749 13:02:46 (0) **
    34750 13:02:46 (0) ** WMI MOF representations: ............................................................................................ OK.
    34751 13:02:46 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
    34752 13:02:46 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
    34753 13:02:46 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
    34754 13:02:46 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
    34755 13:02:46 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34756 13:02:46 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34757 13:02:46 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
    34758 13:02:46 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34759 13:02:46 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    34760 13:02:46 (0) **
    34761 13:02:46 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
    34762 13:02:46 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
    34763 13:02:46 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
    34764 13:02:46 (0) ** WMI static instances retrieved: ..................................................................................... 1822.
    34765 13:02:46 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
    34766 13:02:46 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
    34767 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34768 13:02:46 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
    34769 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
    34770 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
    34771 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
    34772 13:02:46 (0) **
    34773 13:02:46 (0) ** # of additional Event Log events AFTER WMIDiag execution:
    34774 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
    34775 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
    34776 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
    34777 13:02:46 (0) **
    34778 13:02:46 (0) ** 32 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
    34779 13:02:46 (0) ** => This error is typically a WMI error. This WMI error is due to:
    34780 13:02:46 (0) ** - a missing WMI class definition or object.
    34781 13:02:46 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
    34782 13:02:46 (0) ** You can correct the missing class definitions by:
    34783 13:02:46 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
    34784 13:02:46 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
    34785 13:02:46 (0) ** (This list can be built on a similar and working WMI Windows installation)
    34786 13:02:46 (0) ** The following command line must be used:
    34787 13:02:46 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
    34788 13:02:46 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
    34789 13:02:46 (0) ** with WMI by starting the ADAP process.
    34790 13:02:46 (0) ** - a WMI repository corruption.
    34791 13:02:46 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
    34792 13:02:46 (0) ** to validate the WMI repository operations.
    34793 13:02:46 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
    34794 13:02:46 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
    34795 13:02:46 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
    34796 13:02:46 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
    34797 13:02:46 (0) ** the WMI repository must be reconstructed.
    34798 13:02:46 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
    34799 13:02:46 (0) ** otherwise some applications may fail after the reconstruction.
    34800 13:02:46 (0) ** This can be achieved with the following command:
    34801 13:02:46 (0) ** i.e. 'WMIDiag ShowMOFErrors'
    34802 13:02:46 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
    34803 13:02:46 (0) ** ALL fixes previously mentioned.
    34804 13:02:46 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
    34805 13:02:46 (0) **
    34806 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34807 13:02:46 (0) ** WMI Registry key setup: ............................................................................................. OK.
    34808 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34809 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34810 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34811 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34812 13:02:46 (0) **
    34813 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34814 13:02:46 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
    34815 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    34816 13:02:46 (0) **
    34817 13:02:46 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\ABCDEF\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_ISWDC2_2014.05.22_12.49.13.LOG' for details.
    34818 13:02:46 (0) **
    34819 13:02:46 (0) ** WMIDiag v2.1 ended on Donnerstag, 22. Mai 2014 at 13:02 (W:89 E:52 S:1).
    There are a lot of error in the report and I don't know, whether they are relevant or how to solve them. To my current knowledge, I need to solve at least some of them so that I can access the local WMI repository again and get replication back working.
    But after hours of research I am stuck. Any hints are greatly appreciated.
    Regards,
    Oliver

    I don't know why, but soon after posting this, I found a solution to the problem. The WMI part was solved in this thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
    The relevant portion is this:
    Open a CMD prompt in %windir%\system32\wbem
    mofcomp dfsrprovs.mof
    net stop winmgmt
    net start winmgmt
    net start iphlpsvc
    net stop dfsr
    net start dfsr
    I don't know why recompiling of all mof did not solve the problem, but the solution above did. Restarting the DCs solved the communication issue. I don't know why the primary DC forgot about the WMI DFS provider or why communication failed. However, it is
    working again, it seems.

  • Headphone output stopped working (snd-hda, Dell XPS 13)

    Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
    My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
    AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
    I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
    I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
    I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
    I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
    The closest I've been able to get at the problem is this:
    [~]% alsactl monitor
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
    Any hints would be greatly appreciated!
    More info:
    [~]% cat /etc/modprobe.d/alsa-base.conf
    options snd-hda-intel enable=0,1
    options snd-hda-intel model=dell-headset-multi,dell-headset-multi
    This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
    $ cat /sys/module/snd_hda_intel/parameters/model
    dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    To verify these options are actually being used
    $ id -Gn
    martin wheel video audio vboxusers nfs
    I'm in the audio group, not sure if this is required, but can't hurt.
    [~]# cat /etc/asound.conf
    # Use PulseAudio by default
    pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
    ctl.!default {
    type pulse
    fallback "sysdefault"
    # vim:set ft=alsaconf:
    Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
    Some misc. info:
    $ grep Codec /proc/asound/card*/codec*
    Codec: Realtek ALC3661
    [~]% lsmod | grep ^snd
    snd_usb_audio 135316 0
    snd_usbmidi_lib 27484 1 snd_usb_audio
    snd_rawmidi 26806 1 snd_usbmidi_lib
    snd_seq_device 13132 1 snd_rawmidi
    snd_hda_codec_realtek 67127 1
    snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
    snd_hda_intel 26327 3
    snd_hda_controller 26727 1 snd_hda_intel
    snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
    snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    $ lspci -vv
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel modules: snd_hda_intel
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 59
    Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    $ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
    [ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
    [ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
    [ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
    [ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
    [ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
    [ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
    [ 0.000000] On node 0 totalpages: 1973782
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12386 pages used for memmap
    [ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18392 pages used for memmap
    [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 31981568 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.295 MHz processor
    [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
    [ 0.000042] pid_max: default: 32768 minimum: 301
    [ 0.000050] ACPI: Core revision 20140424
    [ 0.020000] ACPI: All ACPI Tables successfully acquired
    [ 0.020260] Security Framework initialized
    [ 0.020267] Yama: becoming mindful.
    [ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024116] Initializing cgroup subsys memory
    [ 0.024140] Initializing cgroup subsys devices
    [ 0.024147] Initializing cgroup subsys freezer
    [ 0.024150] Initializing cgroup subsys net_cls
    [ 0.024155] Initializing cgroup subsys blkio
    [ 0.024183] CPU: Physical Processor ID: 0
    [ 0.024184] CPU: Processor Core ID: 0
    [ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025376] mce: CPU supports 7 MCE banks
    [ 0.025391] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.026475] ftrace: allocating 20445 entries in 80 pages
    [ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [ 0.071098] TSC deadline timer enabled
    [ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.071149] ... version: 3
    [ 0.071150] ... bit width: 48
    [ 0.071151] ... generic registers: 4
    [ 0.071152] ... value mask: 0000ffffffffffff
    [ 0.071154] ... max period: 0000ffffffffffff
    [ 0.071155] ... fixed-purpose events: 3
    [ 0.071156] ... event mask: 000000070000000f
    [ 0.097907] x86: Booting SMP configuration:
    [ 0.097909] .... node #0, CPUs: #1
    [ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.119293] #2 #3
    [ 0.154938] x86: Booted up 1 node, 4 CPUs
    [ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
    [ 0.160676] devtmpfs: initialized
    [ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
    [ 0.164642] pinctrl core: initialized pinctrl subsystem
    [ 0.164688] RTC time: 22:42:27, date: 10/21/14
    [ 0.164750] NET: Registered protocol family 16
    [ 0.164884] cpuidle: using governor ladder
    [ 0.164887] cpuidle: using governor menu
    [ 0.164916] ACPI: bus type PCI registered
    [ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.165118] PCI: Using configuration type 1 for base access
    [ 0.165125] dmi type 0xB1 record - unknown flag
    [ 0.177572] ACPI: Added _OSI(Module Device)
    [ 0.177575] ACPI: Added _OSI(Processor Device)
    [ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.207326] ACPI: Dynamic OEM Table Load:
    [ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.220827] ACPI: Dynamic OEM Table Load:
    [ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.237345] ACPI: Dynamic OEM Table Load:
    [ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.255255] ACPI: Interpreter enabled
    [ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.255298] ACPI: (supports S0 S3 S4 S5)
    [ 0.255300] ACPI: Using IOAPIC for interrupt routing
    [ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.268573] \_SB_.PCI0:_OSC invalid UUID
    [ 0.268575] _OSC request data:1 1f 0
    [ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.269580] PCI host bridge to bus 0000:00
    [ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
    [ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
    [ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
    [ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
    [ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
    [ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
    [ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
    [ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
    [ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
    [ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
    [ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
    [ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
    [ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.295559] vgaarb: loaded
    [ 0.295560] vgaarb: bridge control possible 0000:00:02.0
    [ 0.295603] PCI: Using ACPI for IRQ routing
    [ 0.297024] PCI: pci_cache_line_size set to 64 bytes
    [ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
    [ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
    [ 0.297209] NetLabel: Initializing
    [ 0.297211] NetLabel: domain hash size = 128
    [ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.297225] NetLabel: unlabeled traffic allowed by default
    [ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.299294] Switched to clocksource hpet
    [ 0.305097] pnp: PnP ACPI init
    [ 0.305113] ACPI: bus type PNP registered
    [ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.305256] system 00:00: [io 0xffff] has been reserved
    [ 0.305259] system 00:00: [io 0xffff] has been reserved
    [ 0.305262] system 00:00: [io 0xffff] has been reserved
    [ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
    [ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
    [ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
    [ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
    [ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
    [ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.306696] pnp: PnP ACPI: found 7 devices
    [ 0.306698] ACPI: bus type PNP unregistered
    [ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 0.313661] NET: Registered protocol family 2
    [ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.314216] TCP: reno registered
    [ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314329] NET: Registered protocol family 1
    [ 0.314345] pci 0000:00:02.0: Boot video device
    [ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
    [ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314702] PCI: CLS 64 bytes, default 64
    [ 0.314746] Unpacking initramfs...
    [ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
    [ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
    [ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.390043] Scanning for low memory corruption every 60 seconds
    [ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.392315] zbud: loaded
    [ 0.392526] VFS: Disk quotas dquot_6.5.2
    [ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.392709] msgmni has been set to 15022
    [ 0.392776] Key type big_key registered
    [ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.393009] io scheduler noop registered
    [ 0.393014] io scheduler deadline registered
    [ 0.393072] io scheduler cfq registered (default)
    [ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.393482] intel_idle: MWAIT substates: 0x11142120
    [ 0.393484] intel_idle: v0.4 model 0x45
    [ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.393772] GHES: HEST is not enabled!
    [ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.394367] Linux agpgart interface v0.103
    [ 0.394421] rtc_cmos 00:01: RTC can wake from S4
    [ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.394611] Intel P-state driver initializing.
    [ 0.394625] Intel pstate controlling: cpu 0
    [ 0.394647] Intel pstate controlling: cpu 1
    [ 0.394663] Intel pstate controlling: cpu 2
    [ 0.394684] Intel pstate controlling: cpu 3
    [ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.395139] TCP: cubic registered
    [ 0.395367] NET: Registered protocol family 10
    [ 0.395811] NET: Registered protocol family 17
    [ 0.396487] registered taskstats version 1
    [ 0.397305] Magic number: 2:622:755
    [ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
    [ 0.397659] PM: Hibernation image not present or could not be loaded.
    [ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.399554] Write protecting the kernel read-only data: 8192k
    [ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
    [ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 0.412549] systemd-udevd[57]: starting version 216
    [ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.430313] sdhci: Secure Digital Host Controller Interface driver
    [ 0.430315] sdhci: Copyright(c) Pierre Ossman
    [ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.441502] ACPI: bus type USB registered
    [ 0.441544] usbcore: registered new interface driver usbfs
    [ 0.441562] usbcore: registered new interface driver hub
    [ 0.441712] usbcore: registered new device driver usb
    [ 0.442370] SCSI subsystem initialized
    [ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.442897] ehci-pci: EHCI PCI platform driver
    [ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.444256] libata version 3.00 loaded.
    [ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
    [ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.456468] hub 1-0:1.0: USB hub found
    [ 0.456636] hub 1-0:1.0: 2 ports detected
    [ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
    [ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 0.457437] hub 2-0:1.0: USB hub found
    [ 0.457454] hub 2-0:1.0: 9 ports detected
    [ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.460861] hub 3-0:1.0: USB hub found
    [ 0.460871] hub 3-0:1.0: 4 ports detected
    [ 0.461773] ahci 0000:00:1f.2: version 3.0
    [ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
    [ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
    [ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.473307] scsi0 : ahci
    [ 0.473445] scsi1 : ahci
    [ 0.473555] scsi2 : ahci
    [ 0.473668] scsi3 : ahci
    [ 0.473715] ata1: DUMMY
    [ 0.473717] ata2: DUMMY
    [ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
    [ 0.473721] ata4: DUMMY
    [ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
    [ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.794069] ata3.00: configured for UDMA/133
    [ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
    [ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
    [ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.799393] sda: sda3 sda4
    [ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.887143] hub 1-1:1.0: USB hub found
    [ 0.887202] hub 1-1:1.0: 8 ports detected
    [ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
    [ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
    [ 0.981520] FS-Cache: Loaded
    [ 0.992070] RPC: Registered named UNIX socket transport module.
    [ 0.992075] RPC: Registered udp transport module.
    [ 0.992077] RPC: Registered tcp transport module.
    [ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
    [ 1.007058] Netfilter messages via NETLINK v0.30.
    [ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
    [ 1.023856] vboxdrv: Found 4 processor cores.
    [ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
    [ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
    [ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
    [ 1.322293] systemd-udevd[170]: starting version 216
    [ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
    [ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
    [ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
    [ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
    [ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
    [ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
    [ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.576090] [drm] Initialized drm 1.1.0 20060810
    [ 1.580291] random: nonblocking pool is initialized
    [ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
    [ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
    [ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
    [ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
    [ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.622639] sound hdaudioC0D0: inputs:
    [ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
    [ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
    [ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
    [ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
    [ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 1.628924] ACPI: Power Button [PWRB]
    [ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [ 1.630785] ACPI: Lid Switch [LID0]
    [ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 1.631327] ACPI: Power Button [PWRF]
    [ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
    [ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.641000] wmi: Mapper loaded
    [ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.644274] AVX2 version of gcm_enc/dec engaged.
    [ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 1.707814] iTCO_vendor_support: vendor-support=0
    [ 1.709016] [drm] Memory usable by graphics device = 2048M
    [ 1.709022] [drm] Replacing VGA console driver
    [ 1.710234] Console: switching to colour dummy device 80x25
    [ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
    [ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
    [ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
    [ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
    [ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
    [ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
    [ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.730563] [drm] Driver supports precise vblank timestamp query.
    [ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
    [ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
    [ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
    [ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
    [ 1.756260] [drm] VBT doesn't support DRRS
    [ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
    [ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
    [ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
    [ 1.775456] fbcon: inteldrmfb (fb0) is primary device
    [ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [ 1.808667] mousedev: PS/2 mouse device common for all mice
    [ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2.394398] Switched to clocksource tsc
    [ 2.838140] Console: switching to colour frame buffer device 240x67
    [ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.845936] i915 0000:00:02.0: registered panic notifier
    [ 2.876371] media: Linux media interface: v0.10
    [ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
    [ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.879690] usbcore: registered new interface driver usbhid
    [ 2.879694] usbhid: USB HID core driver
    [ 2.883145] Linux video capture interface: v2.00
    [ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
    [ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
    [ 2.895830] Bluetooth: Core ver 2.19
    [ 2.895849] NET: Registered protocol family 31
    [ 2.895852] Bluetooth: HCI device and connection manager initialized
    [ 2.895861] Bluetooth: HCI socket layer initialized
    [ 2.895864] Bluetooth: L2CAP socket layer initialized
    [ 2.895877] Bluetooth: SCO socket layer initialized
    [ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
    [ 2.901827] usbcore: registered new interface driver uvcvideo
    [ 2.901830] USB Video Class driver (1.1.1)
    [ 2.910511] usbcore: registered new interface driver btusb
    [ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
    [ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
    [ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
    [ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 36.061335] wlan0: authenticated
    [ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 36.070080] wlan0: associated
    [ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
    [ 4501.338278] PM: Syncing filesystems ...
    [ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.348617] done.
    [ 4501.348622] PM: Preparing system for mem sleep
    [ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 4501.351580] PM: Entering mem sleep
    [ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
    [ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.361609] cfg80211: Calling CRDA for country: DE
    [ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
    [ 4501.992409] PM: suspend of devices complete after 640.028 msecs
    [ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
    [ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
    [ 4502.019816] ACPI: Preparing to enter system sleep state S3
    [ 4502.020586] PM: Saving platform NVS memory
    [ 4502.021109] Disabling non-boot CPUs ...
    [ 4502.021139] intel_pstate CPU 1 exiting
    [ 4502.022404] kvm: disabling virtualization on CPU1
    [ 4502.022854] smpboot: CPU 1 is now offline
    [ 4502.023143] intel_pstate CPU 2 exiting
    [ 4502.024386] kvm: disabling virtualization on CPU2
    [ 4502.125774] smpboot: CPU 2 is now offline
    [ 4502.126039] intel_pstate CPU 3 exiting
    [ 4502.127395] kvm: disabling virtualization on CPU3
    [ 4502.229207] smpboot: CPU 3 is now offline
    [ 4502.232189] ACPI: Low-level resume complete
    [ 4502.232259] PM: Restoring platform NVS memory
    [ 4502.232774] Enabling non-boot CPUs ...
    [ 4502.232814] x86: Booting SMP configuration:
    [ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 4502.245238] kvm: enabling virtualization on CPU1
    [ 4502.247462] Intel pstate controlling: cpu 1
    [ 4502.247514] CPU1 is up
    [ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 4502.259870] kvm: enabling virtualization on CPU2
    [ 4502.262107] Intel pstate controlling: cpu 2
    [ 4502.262155] CPU2 is up
    [ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 4502.274504] kvm: enabling virtualization on CPU3
    [ 4502.276760] Intel pstate controlling: cpu 3
    [ 4502.276807] CPU3 is up
    [ 4502.282141] ACPI: Waking up from system sleep state S3
    [ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
    [ 4502.303102] PM: early resume of devices complete after 0.384 msecs
    [ 4502.303194] usb usb2: root hub lost power or was reset
    [ 4502.303197] usb usb3: root hub lost power or was reset
    [ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 4502.329054] sd 2:0:0:0: [sda] Starting disk
    [ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4502.652119] ata3.00: configured for UDMA/133
    [ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
    [ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
    [ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
    [ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
    [ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
    [ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
    [ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
    [ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
    [ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
    [ 4503.274732] PM: resume of devices complete after 970.836 msecs
    [ 4503.275664] PM: Finishing wakeup.
    [ 4503.275668] Restarting tasks ...
    [ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276362] usb 2-5: USB disconnect, device number 3
    [ 4503.276546] pci_bus 0000:01: Allocating resources
    [ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 4503.276596] done.
    [ 4503.276614] pci_bus 0000:02: Allocating resources
    [ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
    [ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
    [ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
    [ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.276778] pci 0000:00:00.0: using default PCI settings
    [ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.276795] i915 0000:00:02.0: using default PCI settings
    [ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.276980] pci 0000:00:1f.3: using default PCI settings
    [ 4503.277590] pci_bus 0000:01: Allocating resources
    [ 4503.277619] pci_bus 0000:02: Allocating resources
    [ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.277673] pci 0000:00:00.0: using default PCI settings
    [ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.277690] i915 0000:00:02.0: using default PCI settings
    [ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.277875] pci 0000:00:1f.3: using default PCI settings
    [ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
    [ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
    [ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4506.058296] dell_wmi: Unknown key e00e pressed
    [ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
    [ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 4507.053766] wlan0: authenticated
    [ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 4507.065241] wlan0: associated
    [ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
    [ 4813.124097] hub 2-2:1.0: USB hub found
    [ 4813.124371] hub 2-2:1.0: 4 ports detected
    [ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
    [ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
    [ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
    [ 4813.515300] usbcore: registered new interface driver snd-usb-audio
    [ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
    [ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
    [ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
    [ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
    [ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
    [ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
    [ 4814.121931] usbcore: registered new interface driver ax88179_178a
    [ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
    [ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 6509.605763] usb 2-2: USB disconnect, device number 6
    [ 6509.605773] usb 2-2.2: USB disconnect, device number 7
    [ 6509.660447] usb 2-2.3: USB disconnect, device number 8
    [ 6509.692281] usb 2-2.4: USB disconnect, device number 9
    [ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
    [ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
    [ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
    [ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
    [ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6511.071805] PM: Syncing filesystems ...
    [ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.087129] done.
    [ 6511.087139] PM: Preparing system for mem sleep
    [ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 6511.090294] PM: Entering mem sleep
    [ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
    [ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
    [ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
    [ 6511.720807] PM: suspend of devices complete after 629.628 msecs
    [ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
    [ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
    [ 6511.748271] ACPI: Preparing to enter system sleep state S3
    [ 6511.749033] PM: Saving platform NVS memory
    [ 6511.749584] Disabling non-boot CPUs ...
    [ 6511.749628] intel_pstate CPU 1 exiting
    [ 6511.751130] kvm: disabling virtualization on CPU1
    [ 6511.752157] smpboot: CPU 1 is now offline
    [ 6511.752650] intel_pstate CPU 2 exiting
    [ 6511.754091] kvm: disabling virtualization on CPU2
    [ 6511.754112] smpboot: CPU 2 is now offline
    [ 6511.755147] intel_pstate CPU 3 exiting
    [ 6511.756491] kvm: disabling virtualization on CPU3
    [ 6511.857520] smpboot: CPU 3 is now offline
    [ 6511.860099] ACPI: Low-level resume complete
    [ 6511.860168] PM: Restoring platform NVS memory
    [ 6511.860682] Enabling non-boot CPUs ...
    [ 6511.860725] x86: Booting SMP configuration:
    [ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 6511.873161] kvm: enabling virtualization on CPU1
    [ 6511.875384] Intel pstate controlling: cpu 1
    [ 6511.875441] CPU1 is up
    [ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 6511.887813] kvm: enabling virtualization on CPU2
    [ 6511.890055] Intel pstate controlling: cpu 2
    [ 6511.890104] CPU2 is up
    [ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 6511.902450] kvm: enabling virtualization on CPU3
    [ 6511.904715] Intel pstate controlling: cpu 3
    [ 6511.904763] CPU3 is up
    [ 6511.910077] ACPI: Waking up from system sleep state S3
    [ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
    [ 6511.931215] PM: early resume of devices complete after 0.474 msecs
    [ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 6511.931308] usb usb2: root hub lost power or was reset
    [ 6511.931310] usb usb3: root hub lost power or was reset
    [ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 6512.030458] sd 2:0:0:0: [sda] Starting disk
    [ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 6512.353607] ata3.0

    Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
    I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

  • My Samba server stopped working and I have no idea why.

    I set up a samba server once I got arch installed and it was working like a boss for about a month. Then one day (i think the machine may have rebooted) it just stopped working. I can't access my samba share from any of my other machines (all running Windows 7). I hadn't changed anything so I don't know what the culprit is. I did some update and looked at the smb.conf file but everything seems to be in order. I also tried to connect with smbclient from the machine itself and I get an NT_STATUS_CONNECTION_REFUSED error.
    What's going on?
    Here is my smb.conf
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options (perhaps too
    # many!) most of which are not shown in this example
    # For a step to step guide on installing, configuring and using samba,
    # read the Samba-HOWTO-Collection. This may be obtained from:
    # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
    # Many working examples of smb.conf files can be found in the
    # Samba-Guide which is generated daily and can be downloaded from:
    # http://www.samba.org/samba/docs/Samba-Guide.pdf
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentry and a ; for parts of the config file that you
    # may wish to enable
    # NOTE: Whenever you modify this file you should run the command "testparm"
    # to check that you have not made any basic syntactic errors.
    #======================= Global Settings =====================================
    [global]
    # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    workgroup = WORKGROUP
    # server string is the equivalent of the NT Description field
    server string = Vault Samba Server
    # Security mode. Defines in which mode Samba will operate. Possible
    # values are share, user, server, domain and ads. Most people will want
    # user level security. See the Samba-HOWTO-Collection for details.
    security = share
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page
    ; hosts allow = 192.168.1. 192.168.2. 127.
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ; load printers = yes
    # you may wish to override the location of the printcap file
    ; printcap name = /etc/printcap
    # on SystemV system setting printcap name to lpstat should allow
    # you to automatically obtain a printer list from the SystemV spool
    # system
    ; printcap name = lpstat
    # It should not be necessary to specify the print system type unless
    # it is non-standard. Currently supported print systems include:
    # bsd, cups, sysv, plp, lprng, aix, hpux, qnx
    ; printing = cups
    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    ; guest account = pcguest
    # this tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/%m.log
    # Put a capping on the size of the log files (in Kb).
    max log size = 50
    # Use password server option only with security = server
    # The argument list may include:
    # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
    # or to auto-locate the domain controller/s
    # password server = *
    ; password server = <NT-Server-Name>
    # Use the realm option only with security = ads
    # Specifies the Active Directory realm the host is part of
    ; realm = MY_REALM
    # Backend to store user information in. New installations should
    # use either tdbsam or ldapsam. smbpasswd is available for backwards
    # compatibility. tdbsam requires no further configuration.
    ; passdb backend = tdbsam
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting.
    # Note: Consider carefully the location in the configuration file of
    # this line. The included file is read at that point.
    ; include = /usr/local/samba/lib/smb.conf.%m
    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    interfaces = 192.168.1.109
    # Browser Control Options:
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    ; local master = no
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    ; os level = 33
    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    ; domain master = yes
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    ; preferred master = yes
    # Enable this if you want Samba to be a domain logon server for
    # Windows95 workstations.
    ; domain logons = yes
    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    ; logon script = %m.bat
    # run a specific logon batch file per username
    ; logon script = %U.bat
    # Where to store roving profiles (only for Win95 and WinNT)
    # %L substitutes for this servers netbios name, %U is username
    # You must uncomment the [Profiles] share below
    ; logon path = \\%L\Profiles\%U
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    ; wins support = yes
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z
    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one WINS Server on the network. The default is NO.
    ; wins proxy = yes
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The default is NO.
    dns proxy = no
    # These scripts are used on a domain controller or stand-alone
    # machine to add or delete corresponding unix accounts
    ; add user script = /usr/sbin/useradd %u
    ; add group script = /usr/sbin/groupadd %g
    ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
    ; delete user script = /usr/sbin/userdel %u
    ; delete user from group script = /usr/sbin/deluser %u %g
    ; delete group script = /usr/sbin/groupdel %g
    #============================ Share Definitions ==============================
    [homes]
    comment = Home Directories
    browseable = no
    writable = yes
    # Un-comment the following and create the netlogon directory for Domain Logons
    ; [netlogon]
    ; comment = Network Logon Service
    ; path = /usr/local/samba/lib/netlogon
    ; guest ok = yes
    ; writable = no
    ; share modes = no
    # Un-comment the following to provide a specific roving profile share
    # the default is to use the user's home directory
    ;[Profiles]
    ; path = /usr/local/samba/profiles
    ; browseable = no
    ; guest ok = yes
    # NOTE: If you have a BSD-style print system there is no need to
    # specifically define each individual printer
    ;[printers]
    ; comment = All Printers
    ; path = /var/spool/samba
    ; browseable = no
    ;# Set public = yes to allow user 'guest account' to print
    ; guest ok = no
    ; writable = no
    ; printable = yes
    [proraid]
    comment = ProRaid Share
    path = /proraid
    public = yes
    available = yes
    brosable = yes
    read only = no
    writable = yes
    # This one is useful for people to share files
    ;[tmp]
    ; comment = Temporary file space
    ; path = /tmp
    ; read only = no
    ; public = yes
    # A publicly accessible directory, but read only, except for people in
    # the "staff" group
    ;[public]
    ; comment = Public Stuff
    ; path = /home/samba
    ; public = yes
    ; writable = no
    ; printable = no
    ; write list = @staff
    # Other examples.
    # A private printer, usable only by fred. Spool data will be placed in fred's
    # home directory. Note that fred must have write access to the spool directory,
    # wherever it is.
    ;[fredsprn]
    ; comment = Fred's Printer
    ; valid users = fred
    ; path = /homes/fred
    ; printer = freds_printer
    ; public = no
    ; writable = no
    ; printable = yes
    # A private directory, usable only by fred. Note that fred requires write
    # access to the directory.
    ;[fredsdir]
    ; comment = Fred's Service
    ; path = /usr/somewhere/private
    ; valid users = fred
    ; public = no
    ; writable = yes
    ; printable = no
    # a service which has a different directory for each machine that connects
    # this allows you to tailor configurations to incoming machines. You could
    # also use the %U option to tailor it by user name.
    # The %m gets replaced with the machine name that is connecting.
    ;[pchome]
    ; comment = PC Directories
    ; path = /usr/pc/%m
    ; public = no
    ; writable = yes
    # A publicly accessible directory, read/write to all users. Note that all files
    # created in the directory by users will be owned by the default user, so
    # any user with access can delete any other user's files. Obviously this
    # directory must be writable by the default user. Another user could of course
    # be specified, in which case all files would be owned by that user instead.
    ;[public]
    ; path = /usr/somewhere/else/public
    ; public = yes
    ; only guest = yes
    ; writable = yes
    ; printable = no
    # The following two entries demonstrate how to share a directory so that two
    # users can place files there that will be owned by the specific users. In this
    # setup, the directory should be writable by both users and should have the
    # sticky bit set on it to prevent abuse. Obviously this could be extended to
    # as many users as required.
    ;[myshare]
    ; comment = Mary's and Fred's stuff
    ; path = /usr/somewhere/shared
    ; valid users = mary fred
    ; public = no
    ; writable = yes
    ; printable = no
    ; create mask = 0765

    Hi,
    My thought is to check the current IP of the server, as your smb.conf has the line interfaces = 192.168.1.109 which means samba will only listen on that interface for requests. If the IP of the server has changed, that would explain why samba isn't working.

  • Adobe RoboHelp 9 has stopped working

    RH9 | WebHelp
    I've copied an existing project and applied a new stylesheet. This has involved multiple "find and replace" actions in order to change old styles to my new styles. All was going well - everything looked fine and the project compiled without a problem. However, after further changes the compile has stopped working. As I start compiling the following message appears as the process starts updating files "Adobe RoboHelp 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    I've tried deleting the CPD file, but it doesn't make any difference. I've also tried removing the last topics I've worked on, but again it's just the same.
    Does anyone have any ideas? I've spent over a day re-styling the project and don't want to lose what I've done.
    Thanks

    Find and replace for style names done correctly should not cause this. If you searched for something like <p class="me"> and replaced it with <p class="you"> and that class was not quite what was in the CSS, RoboHelp would display your topics with the style name showing in block capitals rather than crash.
    My first thought was that something else had been changed unintentionally and was causing this. Then I noted you said it had compiled the first time after you had made the changes. At the moment I am a bit stumped on what it could be.
    The first thing I would try is to generate some other form of help, try Microsoft HTML Help (CHM). If that too fails, then you might have to go for working on a backup as below. However, if it works, I would then create a new webhelp layout by right clicking in the SSL and selecting Create New, not the Duplicate option. If that fails then you may have to work on a backup of the project before you did the find and replace, you did make one didn't you?
    Ttake a fresh copy of the backup so that you retain an untouched copy. Then copy your new CSS from the broken project into a working copy of the backup using Windows Explorer. Manually apply a few of the styles to a few topics and then test compiling. If that works, then do the find and replace work again testing after each style has been changed. After each successful pass, create a backup in case it goes wrong at the next stage. Before you start any find and replace, post back what you are using for that.
    Good luck and post back how you get on.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • ITunes has stopped working/Quicktime uninstall HKEY error!!

    Ok so I just bought a brand new computer that is Windows Vista 64-bit. I installed iTunes and Quicktime the 64 bit version and everything was great until it stopped working. Data execution prevention will not let iTunes open. Here are the steps Ive taken in attempt to fix the problem.
    *Uninstalling Itunes AND Quicktime*
    --iTunes was successful but Quicktime still left a folder in Program Files, and was still listed on the programs list in control panel. So I deleted the Program Files folder. Now when I try to uninstall Quicktime I get this error:
    Could not open key:
    HKEYLOCALMACHINE32\software\classes\typelib\{B11F8D0B-BE5A-46E3-9485-EE692A8B2D3D}\1.0. Verify That you have sufficient access to that key, or contact your support personnel.
    I tried going into regedit and manually deleting the key. That didnt work!
    I also used the free ware program Revo Unistaller, which deletes the associated registry files and everything associated with an install. I did this with Quicktime and now it no longer in the Programs section in control panel, but when I try to reinstall quicktime it still asks me to repair or remove. I've tried both steps and each time I get the same error as stated above.
    What can I do to fix this?

    Hey MrsBeth, it looks like your PC is on a network or something. I am uncomfortable giving advice since I don't know what's going on there.
    What I am comfortable with is these directions below. Give yourself full control and ownership the the entire C: drive and all its subfolders. And temporarily turn off UAC for good measure - you can turn it back on after you've installed iTunes.
    Let's cross our fingers that the install goes through!
    How to Take Ownership and Grant Permissions in Windows Vista
    How to Disable UAC

  • Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

    I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
    There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
    One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
    machine 10.6.1. with RDC 2.0.1 (non-working)
    9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
    On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
    9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
    9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
    Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
    Any help would be appreciated

    Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

  • A few seconds after start the GDM mouse stops working

    After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
    Edited: Mouse works. Only pointer does not move.
    lscpi says:
    00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
    gdm says:
    usb 2-2: new low speed USB device using uhci_hcd and address 4
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
    (this line is repeated several times:)
    [drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
    [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [drm:i915_reset] *ERROR* Failed to reset chip.
    /var/log/Xorg.0.log says:
    [ 23.129]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 23.129]
    X.Org X Server 1.9.3.901 (1.9.4 RC 1)
    Release Date: 2011-01-07
    [ 23.129] X Protocol Version 11, Revision 0
    [ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
    [ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
    [ 23.129] Build Date: 08 January 2011 11:27:31PM
    [ 23.129]
    [ 23.130] Current version of pixman: 0.20.2
    [ 23.130] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
    [ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.206] (==) No Layout section. Using the first Screen section.
    [ 23.206] (==) No screen section available. Using defaults.
    [ 23.206] (**) |-->Screen "Default Screen Section" (0)
    [ 23.206] (**) | |-->Monitor "<default monitor>"
    [ 23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.206] (==) Automatically adding devices
    [ 23.206] (==) Automatically enabling devices
    [ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.260] Entry deleted from font path.
    [ 23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.295] (II) Loader magic: 0x81f3160
    [ 23.295] (II) Module ABI versions:
    [ 23.295] X.Org ANSI C Emulation: 0.4
    [ 23.295] X.Org Video Driver: 8.0
    [ 23.295] X.Org XInput driver : 11.0
    [ 23.295] X.Org Server Extension : 4.0
    [ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
    [ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23.296] (II) LoadModule: "extmod"
    [ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.314] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.314] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.314] Module class: X.Org Server Extension
    [ 23.314] ABI class: X.Org Server Extension, version 4.0
    [ 23.314] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.314] (II) Loading extension XFree86-VidModeExtension
    [ 23.314] (II) Loading extension XFree86-DGA
    [ 23.314] (II) Loading extension DPMS
    [ 23.314] (II) Loading extension XVideo
    [ 23.314] (II) Loading extension XVideo-MotionCompensation
    [ 23.314] (II) Loading extension X-Resource
    [ 23.314] (II) LoadModule: "dbe"
    [ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.320] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.320] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.320] Module class: X.Org Server Extension
    [ 23.320] ABI class: X.Org Server Extension, version 4.0
    [ 23.320] (II) Loading extension DOUBLE-BUFFER
    [ 23.320] (II) LoadModule: "glx"
    [ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.337] (II) Module glx: vendor="X.Org Foundation"
    [ 23.337] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.337] ABI class: X.Org Server Extension, version 4.0
    [ 23.337] (==) AIGLX enabled
    [ 23.337] (II) Loading extension GLX
    [ 23.337] (II) LoadModule: "record"
    [ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 23.338] (II) Module record: vendor="X.Org Foundation"
    [ 23.338] compiled for 1.9.3.901, module version = 1.13.0
    [ 23.338] Module class: X.Org Server Extension
    [ 23.338] ABI class: X.Org Server Extension, version 4.0
    [ 23.339] (II) Loading extension RECORD
    [ 23.339] (II) LoadModule: "dri"
    [ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 23.347] (II) Module dri: vendor="X.Org Foundation"
    [ 23.347] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.347] ABI class: X.Org Server Extension, version 4.0
    [ 23.347] (II) Loading extension XFree86-DRI
    [ 23.347] (II) LoadModule: "dri2"
    [ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.351] (II) Module dri2: vendor="X.Org Foundation"
    [ 23.351] compiled for 1.9.3.901, module version = 1.2.0
    [ 23.351] ABI class: X.Org Server Extension, version 4.0
    [ 23.351] (II) Loading extension DRI2
    [ 23.351] (==) Matched intel as autoconfigured driver 0
    [ 23.351] (==) Matched vesa as autoconfigured driver 1
    [ 23.351] (==) Matched fbdev as autoconfigured driver 2
    [ 23.351] (==) Assigned the driver to the xf86ConfigLayout
    [ 23.351] (II) LoadModule: "intel"
    [ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.408] (II) Module intel: vendor="X.Org Foundation"
    [ 23.408] compiled for 1.9.3, module version = 2.14.0
    [ 23.408] Module class: X.Org Video Driver
    [ 23.408] ABI class: X.Org Video Driver, version 8.0
    [ 23.408] (II) LoadModule: "vesa"
    [ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.414] (II) Module vesa: vendor="X.Org Foundation"
    [ 23.414] compiled for 1.9.0, module version = 2.3.0
    [ 23.414] Module class: X.Org Video Driver
    [ 23.414] ABI class: X.Org Video Driver, version 8.0
    [ 23.414] (II) LoadModule: "fbdev"
    [ 23.425] (WW) Warning, couldn't open module fbdev
    [ 23.425] (II) UnloadModule: "fbdev"
    [ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
    [ 23.426] (II) VESA: driver for VESA chipsets: vesa
    [ 23.426] (++) using VT number 7
    [ 23.435] (WW) Falling back to old probe method for vesa
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: drmOpenMinor returns 8
    [ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.435] (==) intel(0): RGB weight 888
    [ 23.435] (==) intel(0): Default visual is TrueColor
    [ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
    [ 23.436] (--) intel(0): Chipset: "946GZ"
    [ 23.436] (**) intel(0): Tiling enabled
    [ 23.436] (**) intel(0): SwapBuffers wait enabled
    [ 23.436] (==) intel(0): video overlay key set to 0x101fe
    [ 23.520] (II) intel(0): Output VGA1 has no monitor section
    [ 23.587] (II) intel(0): EDID for output VGA1
    [ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
    [ 23.587] (II) intel(0): Year: 2010 Week: 1
    [ 23.587] (II) intel(0): EDID Version: 1.3
    [ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
    [ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
    [ 23.587] (II) intel(0): Gamma: 2.20
    [ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 23.587] (II) intel(0): First detailed timing is preferred mode
    [ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
    [ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 23.587] (II) intel(0): Supported established timings:
    [ 23.587] (II) intel(0): 720x400@70Hz
    [ 23.587] (II) intel(0): 640x480@60Hz
    [ 23.587] (II) intel(0): 640x480@67Hz
    [ 23.587] (II) intel(0): 640x480@72Hz
    [ 23.587] (II) intel(0): 640x480@75Hz
    [ 23.587] (II) intel(0): 800x600@56Hz
    [ 23.587] (II) intel(0): 800x600@60Hz
    [ 23.587] (II) intel(0): 800x600@72Hz
    [ 23.587] (II) intel(0): 800x600@75Hz
    [ 23.587] (II) intel(0): 832x624@75Hz
    [ 23.587] (II) intel(0): 1024x768@60Hz
    [ 23.587] (II) intel(0): 1024x768@70Hz
    [ 23.587] (II) intel(0): 1024x768@75Hz
    [ 23.587] (II) intel(0): 1280x1024@75Hz
    [ 23.587] (II) intel(0): 1152x864@75Hz
    [ 23.587] (II) intel(0): Manufacturer's mask: 0
    [ 23.587] (II) intel(0): Supported standard timings:
    [ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 23.588] (II) intel(0): Supported detailed timing:
    [ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
    [ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 23.588] (II) intel(0): Monitor name: SyncMaster
    [ 23.588] (II) intel(0): Serial No: HMFZ102588
    [ 23.588] (II) intel(0): EDID (in hex):
    [ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
    [ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
    [ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
    [ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
    [ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
    [ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
    [ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
    [ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
    [ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 23.613] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.613] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.613] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Printing probed modes for output VGA1
    [ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Output VGA1 connected
    [ 23.614] (II) intel(0): Using exact sizes for initial modes
    [ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
    [ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
    [ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
    [ 23.614] (**) intel(0): DPI set to (96, 88)
    [ 23.614] (II) Loading sub module "fb"
    [ 23.614] (II) LoadModule: "fb"
    [ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.628] (II) Module fb: vendor="X.Org Foundation"
    [ 23.629] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.629] (II) UnloadModule: "vesa"
    [ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.629] (==) Depth 24 pixmap format is 32 bpp
    [ 23.629] (==) intel(0): VideoRam: 262144 KB
    [ 23.629] (II) intel(0): [DRI2] Setup complete
    [ 23.629] (II) intel(0): [DRI2] DRI driver: i915
    [ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
    [ 23.656] (II) UXA(0): Driver registered support for the following operations:
    [ 23.656] (II) solid
    [ 23.656] (II) copy
    [ 23.656] (II) composite (RENDER acceleration)
    [ 23.656] (II) put_image
    [ 23.656] (II) get_image
    [ 23.656] (==) intel(0): Backing store disabled
    [ 23.656] (==) intel(0): Silken mouse enabled
    [ 23.658] (II) intel(0): Initializing HW Cursor
    [ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.673] (==) intel(0): DPMS enabled
    [ 23.673] (==) intel(0): Intel XvMC decoder disabled
    [ 23.673] (II) intel(0): Set up textured video
    [ 23.673] (II) intel(0): Set up overlay video
    [ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.673] (==) intel(0): hotplug detection: "enabled"
    [ 23.674] (--) RandR disabled
    [ 23.674] (II) Initializing built-in extension Generic Event Extension
    [ 23.674] (II) Initializing built-in extension SHAPE
    [ 23.674] (II) Initializing built-in extension MIT-SHM
    [ 23.674] (II) Initializing built-in extension XInputExtension
    [ 23.674] (II) Initializing built-in extension XTEST
    [ 23.674] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.674] (II) Initializing built-in extension SYNC
    [ 23.674] (II) Initializing built-in extension XKEYBOARD
    [ 23.674] (II) Initializing built-in extension XC-MISC
    [ 23.674] (II) Initializing built-in extension SECURITY
    [ 23.674] (II) Initializing built-in extension XINERAMA
    [ 23.674] (II) Initializing built-in extension XFIXES
    [ 23.674] (II) Initializing built-in extension RENDER
    [ 23.674] (II) Initializing built-in extension RANDR
    [ 23.674] (II) Initializing built-in extension COMPOSITE
    [ 23.674] (II) Initializing built-in extension DAMAGE
    [ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
    [ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.316] (II) LoadModule: "evdev"
    [ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.334] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.334] compiled for 1.9.0, module version = 2.5.0
    [ 24.334] Module class: X.Org XInput Driver
    [ 24.334] ABI class: X.Org XInput driver, version 11.0
    [ 24.334] (**) Power Button: always reports core events
    [ 24.334] (**) Power Button: Device: "/dev/input/event1"
    [ 24.340] (--) Power Button: Found keys
    [ 24.340] (II) Power Button: Configuring as keyboard
    [ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.340] (**) Option "xkb_rules" "evdev"
    [ 24.340] (**) Option "xkb_model" "evdev"
    [ 24.340] (**) Option "xkb_layout" "us"
    [ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.380] (**) Power Button: always reports core events
    [ 24.380] (**) Power Button: Device: "/dev/input/event0"
    [ 24.386] (--) Power Button: Found keys
    [ 24.386] (II) Power Button: Configuring as keyboard
    [ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.386] (**) Option "xkb_rules" "evdev"
    [ 24.386] (**) Option "xkb_model" "evdev"
    [ 24.386] (**) Option "xkb_layout" "us"
    [ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 24.394] (II) No input driver/identifier specified (ignoring)
    [ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
    [ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
    [ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
    [ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
    [ 24.403] (**) Option "xkb_rules" "evdev"
    [ 24.403] (**) Option "xkb_model" "evdev"
    [ 24.403] (**) Option "xkb_layout" "us"
    [ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 24.411] (II) No input driver/identifier specified (ignoring)
    [ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.182] (II) intel(0): Using hsync ranges from config file
    [ 27.182] (II) intel(0): Using vrefresh ranges from config file
    [ 27.182] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.256] (II) intel(0): Using hsync ranges from config file
    [ 27.256] (II) intel(0): Using vrefresh ranges from config file
    [ 27.256] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.363] (II) intel(0): Using hsync ranges from config file
    [ 27.364] (II) intel(0): Using vrefresh ranges from config file
    [ 27.364] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.433] (II) intel(0): Using hsync ranges from config file
    [ 27.433] (II) intel(0): Using vrefresh ranges from config file
    [ 27.433] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
    [ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 72.861] (**) USB Optical Mouse: always reports core events
    [ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
    [ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
    [ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
    [ 72.866] (--) USB Optical Mouse: Found relative axes
    [ 72.866] (--) USB Optical Mouse: Found x and y relative axes
    [ 72.866] (II) USB Optical Mouse: Configuring as mouse
    [ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
    [ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 72.867] (II) USB Optical Mouse: initialized for relative axes.
    [ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 72.868] (II) No input driver/identifier specified (ignoring)
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.752] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.322] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.323] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.093] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.094] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.080] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.081] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.641] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.642] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.913] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.712] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.348] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.916] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.917] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.953] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.954] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.450] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.451] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.802] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.803] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.372] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.373] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.630] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.631] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.932] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.933] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.517] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.518] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.762] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.763] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.439] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.440] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.705] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.706] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.190] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.191] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.467] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.468] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.768] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.770] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.446] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.849] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.852] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.082] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.280] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.171] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.172] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.312] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.313] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.209] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.210] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.521] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.526] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.470] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.606] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.607] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.070] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.071] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.911] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.826] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.827] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.814] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.567] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.568] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.833] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.834] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.806] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.807] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.428] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.429] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.354] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.355] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.029] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.030] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.266] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.267] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.519] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.520] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.179] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.180] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.297] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.376] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.395] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.396] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu

    I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

  • "Mobile Device helper has stopped working" after installing most recent

    OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
    After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
    _*Steps I have taken :*_
    I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
    *The two messages that I continue to get when I open iTunes and connect my phone:*
    1) "Mobile Device helper has stopped working"
    2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
    The most recent error message under "Problems Reports & Solutions" on my start menu read:
    Product: MobileDeviceHelper
    Problem: Stopped working
    Date: 4/7/2010 3:42 PM
    Status: Not Reported
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application Version: 16.691.14.1
    Application Timestamp: 4ba3b8fe
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.550.17.21
    Fault Module Timestamp: 4b8cb530
    Exception Code: c0000005
    Exception Offset: 0000db6b
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    This is the same message that I have received the last 10 times under Mobile Device Helper.
    *Please PLEASE please*, does anyone know how to resolve this problem?
    *Thank you SO MUCH for any insight.*
    -signed, UGH!!!

    Hi,
    I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
    I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
    Really frustrating and disappointing.

Maybe you are looking for

  • Mac Mini Newbie seeks LCD Display Info

    Hi Am about to purchase a Mac Mini. Wondering if I can utilise an LCD TV as my display rather than pay out for an Apple Display? What Max Resolution will I achieve? Will it be comparable to an Apple Display? Any other advice from people whom have don

  • How do you calculate the age of a query?

    Hi, We are trying to determine how old a query is?  Do one of the statistical cubes/queries contain the age or created on date of a query? Thanks for you help.  Points will be rewarded for the correct answer. Thanks, Mike

  • First Video Export to DVD Question

    Hi - I have my first ever video export from Premiere to a DVD and I'm a little nervous about it.  My footage will be shot with the Panasonic ACHD (I think that's the model as I don't have the camera with me here) and the camera is set for 1280 x 720

  • Send Variable From ASP to Flash to ASP

    I'm really, really new to Flash and using Flash 8 Pro. This is what I'm trying to do. I have a list of cars, when someone clicks on a car, they are taken to a page with details about the car and a flash gallery. The Flash Gallery is reads the image f

  • Stored procedure in oracle plsql giving Error

    Hi all, I want to create stored procedure in oracle. In that,I want to update if record is present in the table else want to insert that record in that table. Here is my stored proc which I write. I have very little knowledge about oracle(to be hones