Sanity check ... CRM is not included in Discovery System?

Hi -
We have installed the SAP Discovery System - and I had been assuming that CRM was included - but it looks like it's not.  Is this correct?  Just want to make sure that I'm not missing something obvious -
Thanks,
Michelle

Hi Mike,
technically I'd presume yes. However hardware resources are limited on the box and it might not meet your expectations from a performance perspective. Unfortunately I personally haven't heard of somebody doing that. So I can't tell you what to expect.
Whatever you decide to do: Please make sure to have a working backup in place before making major changes to the system.
Best Regards,
    rAimund

Similar Messages

  • CRM 5.0 ATP check to ECC not including pick / pack time in ECC 6.0

    Been searching SDN & OSS, our ATP check in 5.0 is reading the proper inventory in ECC but when no inventory is available the date being returned is the total replenishment leadtime in the ECC material master. (good)
    When the order is entered in ECC if no stock exist, the total replenishment leadtime become the material availability date in the ECC schedule line, we have 2 days pick / pack time in the shipping point so the confirmed date is 2 factory days after the material availibility date.
    Therefore in CRM the ATP date in CRM looks to be 2 days earlier than desired or what ECC provides.  I also set up the vendor partner in CRM but that did not help.
    Anyone have experience with this one?
    One similiar topic, if total replenshiment leadtime is 3 days and saturday & sunday are not workdays.  a CRM order placed on saturday gives wednesday (monday, tuesday, wednesday) as the date.    ECC gives thursday (tuesday, wednesday, thursday)

    I had 2 issues
    - I didn't have the X set in SMOFPARSFA so i was doing availibility information which doesn't include scheduling (pick pack)
    - other issue was timezones which required note 1423767

  • CRM webUI not login intp EPR system

    Dear expert
    when use WebUI and through this try to login in ECC system I can not login into ecc server ,after searching documents found that  required SSO ( single Sing On ) between both server, How can I create SSO please guide also note that our both servers
    CRM 7.0 and ECC 6 EHP5 both are in ABAP only system not java and portal available.
    Regards

    Hi,
    You must enable the SICF services to run CRM Web UI (check SAP Note 1115493) . Check the below link for more clarifications.
    [http://help.sap.com/bp_crmv12007/CRM_DE/BBLibrary/html/BBlibrary.htm] - section C04: CRM WebClient User Interface.
    With Regards,
    Selvam

  • Hyperion and Siebel CRM release notes and Supported Operating System.

    Hi DBA's
    Kindly provide me the links for Release notes and What are the Operating system support for Hyperion and Siebel CRM?
    Thanks in Advance.
    Best Regards,
    SG

    Hi;
    Thanks allot, the documents helped me and one last question regarding above versions of Hyperion and Siebel,
    1) can i go with Windows 2008 Enterprise Edition 32bit Hyperion and Siebel?
    2) is there any possibility that i want to keep database for both Hyperion and Siebel in Linux 4.0 ES 32bit and Application of Hyperion and Siebel in Windows 2008 EE 32bit?AFAIK Hyperion and Siebel new version is certified wiht Win2008 but i heard some of component not support on linux. Please check below
    http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
    http://download.oracle.com/docs/cd/E11886_01/V8/CORE/core_8_1.html
    I suggest log a Sr and confirm it with oracle support if you have any doubt.
    For your both question please move your post to related place which you could get more quick response, please visit :
    Forum Home » Siebel
    Forum Home » Business Intelligence Challenge to Go » Hyperion EPM
    Regard
    Helios

  • How to check the OSS note in SAP Client system ?

    Hi all
    I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
    Please let me know..
    Thanks
    Mallikarjun

    Hi
    1) One way is checking the version and support pack applied.I.e,
    On the main SAP screen > Systems > Status > Check details of the "Component version".
    2) STMS > Double click on the system you need to check > Check the status of your request.
    Nadini

  • Importing Photos and NOT including Metadata at the same time

    Hello
    I know you can export a photo and marking the check box to NOT INCLUDE metadata, but can you import the same way.
    Thanks

    Aperture does not allow to modify EXIF tags. You will need other tools for doing that. If you know hot to use the Terminal, you can modify EXIF tags with exiftool, see: 
                    Modifying EXIF tags of Originals Using exiftool: camera, lens, gps

  • Add SAP CRM 7.0 to Discovery System?

    Hello all,
    is it possible to add SAP CRM 7.0 to the Discovery System?
    Jan

    I am sure you will be able to install an additional instance on it. But DS-V4 does not come with CRM 7.0.

  • Sales orders from CRM are not getting blocked with credit check

    Hi All
    I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
    Thanks in advance for looking into this

    Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks. 
    Orders created via CRM will not have transaction code set (SY-TCODE).

  • Bailout: failed spill-split-recycle sanity check

    hi all
    i hope someone can help me!
    we have an enterprise portals productive installation on aix5.3
    it is based on netweaver 7.0
    i have just installed a java dialog instance on a windows 2003 server 64 bit which is happily talking to the central instance on aix BUT after changing the java parameters (sapnote 723909) for this new instance, the local windows dev_server0 file now complains with the following error:
    JHVM_BuildArgumentList: main method arguments of node server0
    210       com.sap.engine.core.configuration.impl.addons.PropertyName::init (154 bytes)
    211  !    com.sap.engine.core.configuration.impl.cache.CachedConfiguration::prepareRead (167 bytes)
    212       java.util.AbstractCollection::toArray (68 bytes)
    213       com.sap.engine.lib.xml.dom.DOMDocHandler1::onCustomEvent (130 bytes)
    214       com.sap.engine.lib.xml.dom.DOMDocHandler1::charData (73 bytes)
    Bailout: failed spill-split-recycle sanity check
    211   COMPILE FAILED
    (there are many lines but i have just included one occurrence)
    i just wondered if anyone could tell me which java parameter could have caused this?
    i appreciate i could take out each parameter one by one and stop/start the instance to see when it stops complaining (and i will do this if no-one can help me)
    many thanks
    kirsty

    ok,
    i guess it was obvious really.....
    the flag: -XX:+PrintCompilation (which excludes certain classes from compiling in order to prevent possible server VM crashes) is recommended in note 723909 to help avoid crashes caused by certain classes.
    the thing is this flag seems to cause the class to fail a sanity check in order to stop it compiling which then writes out to the server log causing me unnecessary anguish.
    if the flag is there to prevent classes compiling it should do it cleanly and quietly so im not sure now whether i want it or not!!!
    anyway, apologies for anyone's time i wasted
    kirsty

  • ERROR...This for is not included in the software package you have purchased

    Hi everyone,
    A Business One server was virtualize, after finished the process the server was working properly.
    I add an user and check the professional license.  Next day I got this error "This for is not included in the software package you have purchased" also the rest of the users has restrictions like a CRM license and the error message.  They cannot see all the components of the application.
    Nevertheless on the same server I have another company that do not has any error, the users can log in and they can see everything depending on their authorizations they do not got any error message.
    What could happened , is something with the license profile or could be the authorization of the users ??
    Hope any of you can he p me with this.  I have print screens if any needs them.
    Thanks in advance,
    SBonilla

    Hi,
    You are not assign any license to that particular User, that why this error is comming.
    Before you can assign a license to a user, you must first import the license file.
    As Superuser go to Administration > License > License Administration.
    In the window that appears, press "Import License File" and choose the appropriate license file.
    Go to Main Menu -> License->License Administration->you assign the professional licenses to to the users [or Particular User].
    Regards.
    Koti Babu M

  • P6N Diamond & SLI controller sanity check

    what i would like is a sanity check please from community before RMA is done, i've already contacted both MSI and supplier and have RMA status enabled but before shipping would like to do an opinion from more professional/ experienced people here please 
    MSI reports that SLI controller is bad and to RMA... so ya i probably will but just want doctor 2nd opinions
    thanks in advance!
    testing past few days and having major problems with SLI. 
    mainboard: P6N Diamond MS-7320 v1.0 BIOS 1.2
    processor: Intel Core2 Duo E6850
    graphics cards:  SLI  NX8500GT TD256EH (x2) PCIx16 (both in white slots )
    memory: Corsair CM2x 1024-66400C4 (800mhz, dual channel) (total 2GB)
    drives:  WD1600AA (?) SATAII 3.0GB (raid 0, hardware dipswitched)
    power:  rosewill RX750-S-B Xtreme 750W ATX12V v2.2 EPS12V v2.91  (voltages per bios in spec)
    I have performed several tests including:
    memtest86+ : 25 iterations on memory over 8 hour period = PASS
    ntune stability test : nx8500GT (card #1) in pcix16slot#1 = PASS
    ntune stability test : nx8500GT (card #1) in pcix16slot#2 = PASS
    ntune stability test : nx8500GT (card #2) in pcix16slot#1 = PASS
    ntune stability test : nx8500GT (card #2) in pcix16slot#2 = PASS
    ntune stability test : card#1 in slot#1 & card#2 in slot#2 = FAIL (sli mode on)
    ntune stability test : card#1 in slot#1 & card#2 in slot#2 = FAIL (sli mode off)
    ntune stability test : card#1 in slot#2 & card#2 in slot#1 = FAIL (sli mode on)
    ntune stability test : card#1 in slot#2 & card#2 in slot#1 = FAIL (sli mode off)
    no overclocking
    CPU temperatures ~22 celcius
    SYSTEM temperatures ~38 celcius
    GPU1&2 temp idle ~63 to 66 celcius
    GPU1&2 temp stress ~72 celcius
    all hardware tests ok, no power surges, power supply is adequate and in specs.
    only problems occuring when both cards are in system and operate in either SLI or non-SLI mode.
    all microsoft latest security updates applied
    following hotfixes applied:
    KB940105
    KB936710
    KB930833
    KB932471
    KB945149 (latest per request)

    Quote from: BOSSKILLER on 07-December-07, 04:33:29
    What kind of problems you have?
    Have you tested in XP?
    PSU details.
    Latest drivers from Nvidia installed?
    Power cables to both VGA's connected?
    SLI Bridge connected?
    Hi,
    Answers best I can below:
    Q: Have you tested in XP?
    No, sorry.. I only have Vista x64 platform to use and test (license only  )
    Q: PSU details.
    posted above, but here you go...
    Rosewill RX750-S-B Xtreme 750W ATX12V v2.2 EPS12V v2.91  (voltages per bios in spec)
    Q: Latest drivers from Nvidia installed?
    Yes (data from dxdiag for you)
    Driver Version: 7.15.0011.6375 (English)
    DDI Version: 9Ex
    Driver Attributes: Final Retail
    Driver Date/Size: 10/4/2007 17:14:00, 4993024 bytes
    WHQL Logo'd: Yes
    Q: Power cables to both VGA's connected?  &  SLI Bridge connected?
    Interesting point   With this particular setup, these MSI NX8500GT TD256EH cards do not have SLI bridge and do not require power plugged into video card.  SLI option has onboard bridge controller and is recognized by nvidia drivers and nTune control panel (i am actually able to enable SLI this way w/o a bridge)  yes, I had to rub my eyes too a few time while researching this configuration.
    Mainboard supports ATX 24pin powerconnector (ATX1) and a ATX 12V (JPW1) 8 pin connector.  The power supply supports these types of connections to mainboard.  I will need to reboot after this post and do a visual inspection of reported BIOS voltages for you though and will do so.

  • Do not include some lines in Subtotals and totals in ALV

    Hello All,
    I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
    In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
    As of now I am using ALV grid display and doing the sums by 
    l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
    <b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
    I will be  thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

    Hi,
    see this code,
    Complete code for the ALV grid example
    This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
    The example shows:
    How to setup the ALV grid
    How to ste focus to the grid
    How to set the title of the grid
    How to allow a user to save and reuse a grid layout (Variant)
    How to customize the ALV grid toolbar
    Refresh the grid
    Set and get row selection and read line contents
    Make and exception field (Traffic light)
    Coloring a line
    Steps:
    Create screen 100 with the ALV grid. Remember to include an exit button
    Add a change button to the ALV grid toolbar
    Create screen 200 the Change screen
    The screens:
    The code:
       REPORT sapmz_hf_alv_grid .
    Type pool for icons - used in the toolbar
       TYPE-POOLS: icon.
       TABLES: zsflight.
    To allow the declaration of o_event_receiver before the
    lcl_event_receiver class is defined, decale it as deferred in the
    start of the program
       CLASS lcl_event_receiver DEFINITION DEFERRED.
    G L O B A L   I N T E R N  A L   T A B L E S
       *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
    To include a traffic light and/or color a line the structure of the
    table must include fields for the traffic light and/or the color
       TYPES: BEGIN OF st_sflight.
               INCLUDE STRUCTURE zsflight.
          Field for traffic light
       TYPES:  traffic_light TYPE c.
          Field for line color
       types:  line_color(4) type c.
       TYPES: END OF st_sflight.
       TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
       DATA: gi_sflight TYPE tt_sflight.
    G L O B A L   D A T A
       DATA: ok_code         LIKE sy-ucomm,
        Work area for internal table
             g_wa_sflight    TYPE st_sflight,
        ALV control: Layout structure
             gs_layout       TYPE lvc_s_layo.
    Declare reference variables to the ALV grid and the container
       DATA:
         go_grid             TYPE REF TO cl_gui_alv_grid,
         go_custom_container TYPE REF TO cl_gui_custom_container,
         o_event_receiver    TYPE REF TO lcl_event_receiver.
       DATA:
    Work area for screen 200
         g_screen200 LIKE zsflight.
    Data for storing information about selected rows in the grid
       DATA:
    Internal table
         gi_index_rows TYPE lvc_t_row,
    Information about 1 row
         g_selected_row LIKE lvc_s_row.
    C L A S S E S
       CLASS lcl_event_receiver DEFINITION.
         PUBLIC SECTION.
           METHODS:
            handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
              IMPORTING
                e_object e_interactive,
            handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
              IMPORTING e_ucomm.
       ENDCLASS.
          CLASS lcl_event_receiver IMPLEMENTATION
       CLASS lcl_event_receiver IMPLEMENTATION.
         METHOD handle_toolbar.
    Event handler method for event toolbar.
           CONSTANTS:
    Constants for button type
             c_button_normal           TYPE i VALUE 0,
             c_menu_and_default_button TYPE i VALUE 1,
             c_menu                    TYPE i VALUE 2,
             c_separator               TYPE i VALUE 3,
             c_radio_button            TYPE i VALUE 4,
             c_checkbox                TYPE i VALUE 5,
             c_menu_entry              TYPE i VALUE 6.
           DATA:
               ls_toolbar  TYPE stb_button.
      Append seperator to the normal toolbar
           CLEAR ls_toolbar.
           MOVE c_separator TO ls_toolbar-butn_type..
           APPEND ls_toolbar TO e_object->mt_toolbar.
      Append a new button that to the toolbar. Use E_OBJECT of
      event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
      This class has one attribute MT_TOOLBAR which is of table type
      TTB_BUTTON. The structure is STB_BUTTON
           CLEAR ls_toolbar.
           MOVE 'CHANGE'        TO ls_toolbar-function.
           MOVE  icon_change    TO ls_toolbar-icon.
           MOVE 'Change flight' TO ls_toolbar-quickinfo.
           MOVE 'Change'        TO ls_toolbar-text.
           MOVE ' '             TO ls_toolbar-disabled.
           APPEND ls_toolbar    TO e_object->mt_toolbar.
         ENDMETHOD.
         METHOD handle_user_command.
      Handle own functions defined in the toolbar
           CASE e_ucomm.
             WHEN 'CHANGE'.
               PERFORM change_flight.
           LEAVE TO SCREEN 0.
           ENDCASE.
         ENDMETHOD.
       ENDCLASS.
    S T A R T - O F - S E L E C T I O N.
       START-OF-SELECTION.
         SET SCREEN '100'.
       *&      Module  USER_COMMAND_0100  INPUT
       MODULE user_command_0100 INPUT.
         CASE ok_code.
           WHEN 'EXIT'.
             LEAVE TO SCREEN 0.
         ENDCASE.
       ENDMODULE.                 " USER_COMMAND_0100  INPUT
       *&      Module  STATUS_0100  OUTPUT
       MODULE status_0100 OUTPUT.
         DATA:
      For parameter IS_VARIANT that is sued to set up options for storing
      the grid layout as a variant in method set_table_for_first_display
           l_layout TYPE disvariant,
      Utillity field
           l_lines TYPE i.
    After returning from screen 200 the line that was selected before
    going to screen 200, should be selected again. The table gi_index_rows
    was the output table from the GET_SELECTED_ROWS method in form
    CHANGE_FLIGHT
         DESCRIBE TABLE gi_index_rows LINES l_lines.
         IF l_lines > 0.
           CALL METHOD go_grid->set_selected_rows
               EXPORTING
                 it_index_rows = gi_index_rows.
           CALL METHOD cl_gui_cfw=>flush.
           REFRESH gi_index_rows.
         ENDIF.
    Read data and create objects
         IF go_custom_container IS INITIAL.
      Read data from datbase table
           PERFORM get_data.
      Create objects for container and ALV grid
           CREATE OBJECT go_custom_container
             EXPORTING container_name = 'ALV_CONTAINER'.
           CREATE OBJECT go_grid
             EXPORTING
               i_parent = go_custom_container.
      Create object for event_receiver class
      and set handlers
           CREATE OBJECT o_event_receiver.
           SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
           SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
      Layout (Variant) for ALV grid
           l_layout-report = sy-repid. "Layout fo report
    Setup the grid layout using a variable of structure lvc_s_layo
      Set grid title
           gs_layout-grid_title = 'Flights'.
      Selection mode - Single row without buttons
      (This is the default  mode
           gs_layout-sel_mode = 'B'.
      Name of the exception field (Traffic light field) and the color
      field + set the exception and color field of the table
           gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
           gs_layout-info_fname = 'LINE_COLOR'.
           LOOP AT gi_sflight INTO g_wa_sflight.
             IF g_wa_sflight-paymentsum < 100000.
          Value of traffic light field
               g_wa_sflight-traffic_light = '1'.
          Value of color field:
          C = Color, 6=Color 1=Intesified on, 0: Inverse display off
               g_wa_sflight-line_color    = 'C610'.
             ELSEIF g_wa_sflight-paymentsum => 100000 AND
                    g_wa_sflight-paymentsum < 1000000.
               g_wa_sflight-traffic_light = '2'.
             ELSE.
               g_wa_sflight-traffic_light = '3'.
             ENDIF.
             MODIFY gi_sflight FROM g_wa_sflight.
           ENDLOOP.
      Grid setup for first display
           CALL METHOD go_grid->set_table_for_first_display
             EXPORTING i_structure_name = 'SFLIGHT'
                       is_variant       = l_layout
                       i_save           = 'A'
                       is_layout        = gs_layout
             CHANGING  it_outtab        = gi_sflight.
       *-- End of grid setup -
      Raise event toolbar to show the modified toolbar
           CALL METHOD go_grid->set_toolbar_interactive.
      Set focus to the grid. This is not necessary in this
      example as there is only one control on the screen
           CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
         ENDIF.
       ENDMODULE.                 " STATUS_0100  OUTPUT
       *&      Module  USER_COMMAND_0200  INPUT
       MODULE user_command_0200 INPUT.
         CASE ok_code.
           WHEN 'EXIT200'.
             LEAVE TO SCREEN 100.
             WHEN'SAVE'.
             PERFORM save_changes.
         ENDCASE.
       ENDMODULE.                 " USER_COMMAND_0200  INPUT
       *&      Form  get_data
       FORM get_data.
    Read data from table SFLIGHT
         SELECT *
           FROM zsflight
           INTO TABLE gi_sflight.
       ENDFORM.                    " load_data_into_grid
       *&      Form  change_flight
    Reads the contents of the selected row in the grid, ans transfers
    the data to screen 200, where it can be changed and saved.
       FORM change_flight.
         DATA:l_lines TYPE i.
         REFRESH gi_index_rows.
         CLEAR   g_selected_row.
    Read index of selected rows
         CALL METHOD go_grid->get_selected_rows
           IMPORTING
             et_index_rows = gi_index_rows.
    Check if any row are selected at all. If not
    table  gi_index_rows will be empty
         DESCRIBE TABLE gi_index_rows LINES l_lines.
         IF l_lines = 0.
           CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
                EXPORTING
                     textline1 = 'You must choose a line'.
           EXIT.
         ENDIF.
    Read indexes of selected rows. In this example only one
    row can be selected as we are using gs_layout-sel_mode = 'B',
    so it is only ncessary to read the first entry in
    table gi_index_rows
         LOOP AT gi_index_rows INTO g_selected_row.
           IF sy-tabix = 1.
            READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
           ENDIF.
         ENDLOOP.
    Transfer data from the selected row to screenm 200 and show
    screen 200
         CLEAR g_screen200.
         MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
         LEAVE TO SCREEN '200'.
       ENDFORM.                    " change_flight
       *&      Form  save_changes
    Changes made in screen 200 are written to the datbase table
    zsflight, and to the grid table gi_sflight, and the grid is
    updated with method refresh_table_display to display the changes
       FORM save_changes.
         DATA: l_traffic_light TYPE c.
    Update traffic light field
    Update database table
         MODIFY zsflight FROM g_screen200.
    Update grid table , traffic light field and color field.
    Note that it is necessary to use structure g_wa_sflight
    for the update, as the screen structure does not have a
    traffic light field
         MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
         IF g_wa_sflight-paymentsum < 100000.
           g_wa_sflight-traffic_light = '1'.
      C = Color, 6=Color 1=Intesified on, 0: Inverse display off
           g_wa_sflight-line_color    = 'C610'.
         ELSEIF g_wa_sflight-paymentsum => 100000 AND
                g_wa_sflight-paymentsum < 1000000.
           g_wa_sflight-traffic_light = '2'.
           clear g_wa_sflight-line_color.
         ELSE.
           g_wa_sflight-traffic_light = '3'.
           clear g_wa_sflight-line_color.
         ENDIF.
         MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
    Refresh grid
         CALL METHOD go_grid->refresh_table_display.
         CALL METHOD cl_gui_cfw=>flush.
         LEAVE TO SCREEN '100'.
       ENDFORM.                    " save_changes

  • By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

    By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
    Thanks
    Jacky

    Hi,
    If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Licence   is not included for the material - J1IH

    Hi All
    We are working on ECC 6.0.
    While doing J1IH ( Additional Excise) with Subtransaction Type 01, we are getting a warning message as -
    Licence   is not included for the material
    Message no. 8I993
    However if we process without any Subtransaction Type, no warning is flashed.
    Please let me know the reason for the same and what could be done so that system doesnt prompt it?
    Regards
    Kapil

    Hi
    Check SAP note 1223591
    Regards
    Antony

  • Licence   is not included for the material

    Hi,
    I have maintained account ddetermination for DIEX ETT for sub transaction type 22. When I am doing Additional Excise in J1IH system is giving the warning message as "Licence   is not included for the material" and it is not picking any G/L accounts. Where as without subtransaction , it is picking concerned G/L accounts. Please suggest, what I have to do?
    Regards,

    Hi
    Check SAP note 1223591
    Regards
    Antony

Maybe you are looking for

  • Add stock types to MB5B report output

    Hi, We need to create a new report which will be a combination of MB5B and MB52. In the sense, the new report should be able to give the stock on a particular posting date split into the different stock types like unrestricted, restricted, QI, blocke

  • I would appreciate information on how to download an updated Adobe Flash for my New Apple Ipad?

    I have been unable to download a free upgrade for the Adobe Flash on my new Apple Ipad? Do I need to download through Cloud or just download as an upgrade on my Ipad? I apologize having to ask elementary questions but I am terribly Tech Handicapped.

  • New iPod to new computer with another iPod already in iTunes

    My iPod Video was originally loaded to my laptop and I backed up everything to an external hard drive. That iPod was stolen. I just purchased an iTouch and want to keep the iTunes on my desktop computer and the laptop. However, my husband also has an

  • Anyone using Blackmagic Intensity Pro with Premiere CS4

    I've looked through the threads and have seen similar postings, but no real good answers. Is anyone using Blackmagic Intensity Pro to viiew timeline on a HDTV using the HDMI connector? I purchasedf the Intensity Pro and can't get it to work with CS4.

  • Is the mini displayport high definition?

    I have a Mac Pro with Ati Radeon HD 5770 and just got the Apple 27" Cinema Display and one thing I can't find the answer to is - is the mini display port serving the high definition?