Sansdisk sdhc not compatible for video playback

video playback jumping in iphoto when using a 32 GB Sansdisk sdhc card to import video

If you didn't format the Sandisk to Mac before storing anything on it you will have to transfer them to or burn them to a CD or DVD and hopefully they are all .jpg then you shouldn't have a problem. If you are going to use the Sandisk on a Mac it must be re-Formatted because they come formatted fat 32 for PC. You may be low on ram as well if what you have stored is Video. You may have to download a different Player like VLC it will play just about everything.

Similar Messages

Sony HDV Walkman not seen for video playback

Hello.
Bit of a problem - have just taken delivery of two spanking new Sony GV-HD700E decks to use in our edit suites at work.
Capturing from the decks works like a charm in both HDV (at both 1080i50 and 25p) and DV-PAL (4:3 and Anamorphic). Playback controls are also working fine.
The problem is when I use 'Print To Video' - everything works fine in DV, but unfortunately the settings under 'Video Playback' for all HDV formats are greyed out - I can't get ANY playback in HDV to the deck at all.
I've tried all the HDV Device Control Presets without success (including unplugging the Firewire cables, restarting the deck and the Mac after each change).
The Sony site says the device definitely takes HDV in, so I was just wondering if it's a driver issue?
Any ideas?
Thanks.
Jim
NB - I did plug the Firewire cables back in each time...
OS 10.5.2
FCP 6.0.2
MBP 2.33 and Mac Pro 8-core 3 GHz
Message was edited by: blooblooblum

What that means is you cannot externally monitor HDV without a 3rd party card or box. You can, however, Print to Video with HDV. I've done it successfully with a Sony V1U with FCS 1 (FCP 5.1.4) and now with FCS 2.
If everything is connected and powered up in the proper order, it should work with the same Easy Setup used to originally capture the footage for the project.
It's very important that the camera or deck be connected to the mac via firewire and then powered up before the computer is turned on. After powering up the mac, launching FCP, and opening your project, make sure the timeline window with your finished, rendered/conformed sequence is activated.
Then, go to Print to Video, make your selections, select the 'Start Recording Automatically' box, and hit OK. Your sequence will do some additional conforming, and then your camera/deck should begin to record as the sequence plays out.
In addition, make sure other firewire devices and cables are disconnected during the Print to Video operation. I've done it successfully with other drives and devices connected, but it could cause problems with certain setups.
Message was edited by: Red Jacket Mike

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

Connecting the canon SX50 to HDTV for video playback???

Connecting the canon SX50 to HDTV for video playback???
ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
(#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
Is there an easy way to accomplish this?
The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
I'm not quite sure I'm recording in full HD...The payback is only 60i

Thanks grazie!
Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
I was also able to control the SX50 TV Display with my samsung remote, kool.
As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway) if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any. Thanks, or grazie grazie!

Volume control for video playback through Apple TV2

I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
I am using the apple remote app on my iphone to control the apple tv.
Whats working:
Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider. Not as cool as using the hard +/- buttons but still works.
Whats not working:
Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
Is there a setting that can be changed or a solution I havent found?
Thanks

Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
HDMI 1 is connected to the satellite settop box with its own remote control ( channel +/-, volume +/- etc. ) it work s fine.
HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
How can we help Apple to open the volume +/- function on their own remote control ?

Old Composite Video cable (Tangerine iBook) not compatible with Video iPod

I discovered a little surprise.
Despite being exactly identical on both ends of the cable, an old Apple Composite Video cable, originally purchased for a Tangerine iBook, is not compatible with Video iPod.
Anybody confirms such situation, or is it just my Video iPod with a faulty video output?
Ciao
30G Video iPod Fifth Generation Mac OS X (10.3.9)

Gerardo
The cable may look the same but it's wired differently. Please see this for more info :
http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
regards
Brian

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
I haven’t been able to find any.
Since the .m4v file type appears to prevent any video bought or rented from the iTunes Store from being played using any other program the lack of these picture controls - if indeed they are lacking - make it seriously deficient as a video player.

Thanks for the rapid response to my enquiry.
I know that it’s possible to adjust the monitor’s performance via System Preferences but it is rather long-winded and I’d rather not alter the settings for the entire screen (and then have to change them all back once finished) when it’s only the video playback window that needs adjustment.
Since iTunes provides various options using the Equalizer for adjusting sound playback it seems rather odd that they don’t have a similar panel for video.
Regarding QuickTime.
Apparently earlier versions (such as 7) had picture controls but the current version (10.4) does not.
I assume Apple are phasing out QT whose development seems to have stopped - or rather gone backwards since it now lacks capabilities it once had - and intend in future to treat iTunes as their universal media player which no doubt makes sense from their point of view.
I wasn’t aware of the .m4v file type when I made my first and probably last video purchase via iTunes yesterday and didn’t realise that it would restrict my options for playback so completely.
The experience has really put me off buying any additional video from the iTunes Store.
Back to DVDs.

Graphics card not available for video output

Hi, I'm trying to use a consumer TV as a video monitor (additional to two computer monitors). I have an ATI Radeon 9200 graphics card with S-vid out for the purpose. I use a separate card for the two computer monitors. This setup works fine on the desktop and for Quicktime (present movie command), but Final Cut does not pick up the 9200 in the list of available devices for video playback in AV setup. I've tried using my Sony Handycam as a firewire to video converter instead and this has patchy results a best, but did work just. I'd much rather try to set up the ATI if possible.
Thanks in advance for any help.

Thank you Jerry, I was obviously given a poor recommendation to buy that card with the TV out if it was never going to work. I'm sure however, that I have used many systems with a dedicated TV out from a graphics card that did not involve using firewire. It seems that Apple don't think this is a very good idea either since they have stopped support for this (except on AGP cards) in later versions of Final Cut. Unfortunately I can't seem to find an up to date AGP with a video out. And I wish I could get that firewire trick working with my dv camera! Cheers, Matt

PPro engine for video playback question

Joe mentioned in another thread that Encore 2.0 uses "PPro engine ... for video playback, instead of DirectShow". Does this imply that Encore DVD requires a CPU with the SSE2 instruction set like PPro does? Thanks.

Yes.

Hello sir this is anshul from india i am using i phone 4 16gb and my i phone is hanging on daily basis with my views i am thinking may be ios 7.1 is not compatible for the i phone 4 and if it can be possible my software can be degrade kindly tell me as oo

HELLO APPLE SUPPORT THIS IS ANSHUL FROM INDIA AND ONE THING I WANNA KNOW HOW CAN WE DEGRADE THE SOFTWARE OF I PHONE BCZ I AM USING IOS 7.1 BUT IT IS NOT COMPATIBLE FOR THE APPLE 4 16GB SO IWANNA DEGARDE IT KIINDLY TELL ME AS SOON AS POSSIBLE

Hi anu,
Apple provides no downgrade path for the iOS. You need to check your setting and do some troubleshooting (do a search of this forum for suggestions). I have an iPhone 4, and I am running iOS 7.1.1 with no issues.
Cheers,
GB

It says the application not compatible for this ipod

it says the application is not compatible for my i touch

How can I find apps that will work on this older Ipod touch? I can't even find a section that only applies to Ipod touch games.

Adobe DV is not working for Video out in CS6!

Adobe DV is not working for Video out in CS6!
I verified my DV device is working fine with Premier Pro CS6.
Anybody ever get this to work?

Stan,
First, the two audio/video output preferences in Encore CS4 and CS6 have different looks, as seen in the images below.
But both are going out through DV/Firewire. Premiere Pro CS6 has the same look and settings as Encore CS6 and the Preview goes out to the monitor.
CS4 -first image and CS6 -second image.

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Are the Ideapad Series not compatible for upgradation to Win 7?

Is IDEAPAD S 10-2 not compatible for upgradation to Windows 7?
It's not listed in the compatible group list by Lenovo but Lenovo advises to run the Upgrade Advisor.
My machine was built in Jul 09. Lenovo site says systems built after Oct 09 support Windows7. As such, is this system not compatible?

Hi did you see this that answer your quest...
http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Windows-7-Official-Drivers-are-released-the-wa...
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7
Windows 7 Driver Help
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Forefront Endpoint not compatible for Windows 8

Forefront Endpoint is not compatible for Windows 8.
What else does Microsoft offer as an antivirus
for Windows 8 Machines?
Or do they have a version compatible for Windows 8?

Hi,
Here it is our official answer for that:
http://blogs.technet.com/b/mmpc/archive/2013/10/09/our-commitment-to-microsoft-antimalware.aspx
You can understand more from this :
Goodbye Microsoft Security Essentials: Microsoft Now Recommends You Use a Third-Party Antivirus
Tarek Majdalani | MS Forefront Edge Security MVP |
http://www.elmajdal.net

Sansdisk sdhc not compatible for video playback

Similar Messages

Maybe you are looking for