Sanyo HD-2000 Native 1080p60. How compatible?

Hi,
I currently own a HD1010. I film in 720p60. I use MPEG StreamClip to produce AIC files to use in FCE 4 (which according to Movie Inspector are 59.94fps).
The HD-2000 is now available which shoots in 1080p60. I suppose I can produce (rather large!) AIC files the same way which would also be 59.94fps.
However, I keep reading posts saying that FCE only works with 30fps (or 29.97). However, I am currently editing in 60fps (or at least I think I am!). The only weird thing is that 'Export to Quicktime' only exports at 29.97fps.
Am I totally mistaken about how FCE works? Am I somehow only editing in 29.97fps?
Message was edited by: NeilGlroy

Neil, I just bought last week the Xacti FH1 that has the same specifications as the HD2000, the only diffences are the different body, mic input and light that the HD2000 has. I recorded some footage on 1080p60 and import it directly to FCE without converting it to AIC, once you put part of the video on the sequence then it has to be render, but so far rendering just the parts that I want to add to my project sequence instead of converting all the footage to AIC is less time consuming. When I import the footage to FCE and check the properties of the video is shows 59.97 fps but I think depending on what format you export, iy may or may not change the frame rate. Still playing with that. So far the best quaility I have archive to play the final edited movie on my 1080p HDTV via my PS3 is exporting to apple tv format. but the format is equivalent to 1080i30. I tried to export to MP4 using h.264 with 59.97 fps but it run for ever. You will really need a quad core mac to be able to process that. The editing is difficult as well using 1080p60 footage. So far what I have been more succesful with is recording with the camera on 1080i60. My imac can handle that better but still takes time to render or convert.
Hope this gives you some insight

Similar Messages

  • Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

    I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
    How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
    Thanks
    Tim

    Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
    In response to the original problem:
    I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
    tell application "Contacts"
              set thePeople to selection
              repeat with aPerson in thePeople
                        set theDate to birth date of aPerson
                        if theDate is not missing value then
                                  set the year of theDate to 1604
                                  set birth date of aPerson to theDate
                        end if
              end repeat
    end tell
    copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

  • HT202774 Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions?

    Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions for the native player?

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • How compatible is Oracle forms with OCX / ActiveX components

    How compatible is Oracle forms 6.0 with OCX / ActiveX components?
    IFve got to very nice activeX controls (ctSchedule and ctMday)
    from DBI-TECH(www.dbi-tech.com) but they donFt work properly
    within Forms. They work great within VBA (word).
    Sometimes they donFt display things well or donFt react to the
    mouse in the properly manner.
    What can be wrong os is Oracle forms not 100% activeX compatible.
    Thanks
    Guido Reulen
    [email protected]
    null

    Hi b w,
    I do not know much about Simply Accounting, however, if the Crystal Reports can be integrated with this software, then their tech support would be the best one to answer the issue with limited access to reports.
    Secondly, if you can get an ODBC driver for your Simply Accounting, you might be able to create reports in Crystal reports (Again with no guarantee as Simply Accounting does not fall in the supported platforms for Crystal Reports).
    I would suggest you to contact the tech support of Simply Accounting to know if there is any specific version of Crystal reports that works best with your software.
    It is simple to create highly professional reports with Crystal reports and you can either refer to the help included with the software or can log on to SAP support site and download the Crystal Reports user's guide to get step by step instructions on creating reports.
    Please do let us know if you have any further questions.
    Regards,
    Abhishek Jain.

  • How compatible about the PT880 Neo-LSR

    Dear all,
    My old motherboard of 865pe (p4p800-x) is damaged,so now
    I want to buy the motherboard with type "PT880 Neo-LSR"
    But I don't know how compatible it is.
    I want it to work with these hardwares as below:
    Motherboard :PT880 Neo-LSR
    CPU :P4 2.4C
    Memory : Kingston DDR400 256MB 4pcs
    Hard drive: Seagate PATA 160G + WD SATA2 320G( it will be limited to 150MB/S)
    Video Card: Geforce 2 MX400 or ATI 9550
    Printer : Epson ME2 with usb plug
    CD -ROM
    Any advice is welcome!
    helai

    Quote from: Fredrik on 24-March-09, 00:47:14
    It is a Pentium 4 board. How can the reviews be anything than mediocre, at best.
    I wrote Socket A, but maybe in 2004 you could get an AMD64 system. They ran in eights around the Pentium 4, at a lower power consumption and heat dissipation.    Now, I think you could get one at a very good price. This is a mere 180$, even in expensive Sweden: http://www.komplett.se/k/ki.aspx?sku=325623
    Thanks
    I am agree with you, but I still want to get a P4 board to replace my damaged one ,because it 's a easy and cheap way to solve my problem.

  • Nokia E90 and Linux... how compatible are they?

    I am hoping to soon upgrade my current mobile phone (Nokia 6822) and separate PDA (a Palm Tungsten T3) to a Nokia E90. However, I have reservations...
    Does anyone have any knowledge or experience about how the Nokia E90 syncs with Linux Ubuntu? I know it doesn't come "out the box" with Linux support, unfortunately, but what about after-market solutions and work-arounds?
    I don't mind if I sync through a USB cable or Bluetooth, as long as it works. (I really want to avoid running WINE or something similar though...)
    Any thoughts and suggestions appreciated...!
    (And the day Nokia issues Linux support I, for one, will be a happy bunny!)
    Message Edited by prodromoi on 11-Jan-2008 02:30 PM

    Before you get your E90 you MUST think about support , I got 2 BRAND NEW and I have been a NOKIA costumer for more than 10 years (yes , I own 2 communicators of each model ever built and A LOT of accessories and other models as well...) The paint job started peeling off in about 2 weeks , wrote NOT COMPLAINING but looking for any advise , they replied that there is no support for E90 in Taiwan... but they still working good and I decided to cover them with plastic skin , later on they released an "upgrade" that does NOTHING and I did not check asuming that NOKIA of course will do things always thinking in functionality... to make it short ... 2000USD turned into garbage ...
    After the upgrade none of them would recognize the backups I LOST ALL MY CONTACTS LITERALLY JOBLESS!!!!!!!!!!!
    I wrote to "costumer care" that really doesn't care and they tried to convince me that a hardware reset will fix it , of course using NOKIAs for more than 10 years I KNOW THIS BUT IT JUST DOESNT WORKED.
    So finally they say that I had to ship my units to Finland for them to check...
     THEY DID NOT NEED MY PHONES TO BE SHIPPED TO FINLAND TO BE SPOILED RIGHT?
    THEY SPOILED ONLINE , SO SAME AS THE "UPGRADE" WAS SENT , I SEE NO REASON TO SEND THEM BECAUSE A BIT OF LOGIC THEY JUST NEED TO RELEASE THE DOWNGRADE ...
    After the OS "Upgrade"
    -Not recognizing backups
    -Browser not working or poorly performing and phone OVERHEATS to the point of hurt your hand
    -takes about 22 minutes to reboot
    -A brand new NOKIA battery will last for about 4 hours if you don't use the device (20 minutes in use)
    -It turns EXTREMELY SLOW
    -Battery meter shows full everytime , but after reboot it shows empty.
    So ... just for you to know and consider , I do not know the new communicator N** might be good  but for now I just don't feel like risking my money on them , and due to this I am probably getting another two smartphones from a brand that AT LEAST CARE A BIT FOR THE COSTUMER.
    Wrote this because someone said there is no UBUNTU support ... the truth is that there is no support at all.
    Sorry to step on your excitement about the E90 
    You can have the one that I still have if you want.

  • Sanyo VPC 1000HD H.264 Not Compatible with QuickTime or FCP

    I recently aquired the Sanyo Xacti-VPC 1000HD.
    From the results I've observed so far, it's a terrific camera for the price.
    My problem, and I know this has been touched in this forum to a limited degree, is that FCP and QuickTime see the MP4 (H.264) files generated by this camera as green screens.
    Sanyo suggests that regressing to QuickTime 7.1.6 is the way to go since it supposedly works while the newest update QuickTime 7.2 strangely only creates a green screen... and some user bad language.
    I was hoping my upgrade to Leopard (wow 300+ improvements) would cure this issue with FCP 6.0 but noo, green is "in" these days and that's all FCP 6.0 will show me when I import any of those files.
    No doubt this situation will be rectified over time and I know this camera is relatively new to the market BUT I would like to find a means of cutting it's output NOW.
    I tried the one solution offered in an earlier posting of regressing to QuickTime 7.1.6.
    It did sorta work briefly (choppy video playback but no green screen) but later launches of FCP 6.0 just resulted in FCP launch aborts.
    Another poster suggested that iMovie '08 w/QT 7.2 handled Sanyo h.264 files okay but apparently iMovie '08 on my MacBookPro (purchased spring 2007) prefers green as well.
    I do hope someone can forward a workable solution as I really like this camera.
    They have a demo video available at through the Sanyo site of some music performance that proves someone is doing nice editing with the Sanyo VPC-1000HD h.264 files, though I have no idea what technology they are using?
    Anyway, any and all responses would be greatly appreciated.
    Regards,
    jcrewe

    About QTs encoding size the clip is not forced to 4:3 resolution of 320x240, instead it is resized to fit in the boundaries of a 320x240 rectangle. i.e. a 640x268 clip I had, was resized to 320x134.
    -it supports non-mod16 resolutions like the one above or 317x240.
    found some info on profiles:
    QuickTime only supports up to Main Profile. None of the High Profile settings such as 8x8 intra are supported by Apple. If you try to encode your x264 video with these settings, it will NOT play on QuickTime.
    AVC/H.264 Profiles
    The AVC/H.264 standard defines four different Profiles: Baseline, Main, Extended and High Profile (which themselves are subdivided into Levels):
    - Baseline Profile offers I/P-Frames, supports progressive and CAVLC only
    - Extended Profile offers I/P/B/SP/SI-Frames, supports progressive and CAVLC only
    - Main Profile offers I/P/B-Frames, supports progressive and interlaced, and offers CAVLC or CABAC
    - High Profile (aka FRExt) adds to Main Profile: 8x8 intra prediction, custom quants, lossless video coding, more yuv formats (4:4:4...)
    Does anyone have more info on the specs of Baseline 1.3?
    Google was not my friends on that one.

  • How compatible is Motion 5 with Adobe After Effects CS5.5?

    If I create a project in Motion 5, am I able to export this project so that it is natively importable into Adobe After Effects CS5.5? Thanks in advance for any feedback.

    The two will not read each other's project files.  You could try an XML export, and import that into AE.  Audomatic Duck makes translators for this type of stuff.

  • Sanyo Xacti HD1010 - FCP - Apple TV - COMPATIBLE????

    I want to buy a Sanyo Xacti HD1010 camcorder. It seems to be the only camcorder out there that I can take the files and play directly in iTunes due to its H.264 encoding and the iTunes-friendly MP4 format. I have three Apple TVs on three different 46" LCD TVs in my home, hence my need for iTunes compatibility.
    I'd like to know for sure if FCP can edit footage from this Sanyo Xacti HD1010 camcorder. I have read in places that it can't. But others say it can.
    Can anyone shed some light on this topic for me?

    Thanks for the info. So correct me if I'm wrong, I can import the files from the Xacti, convert them, edit them, and then save them back in an Apple TV-friendly format?
    I pulled a sample file from Sanyo. It's a MP4 with the H264 codec. When I bring it into FCP, I can browse the file fine, set in and out points, etc. then add it to my timeline. But when it lands in the timeline, it has a red bar on top. I render it, then all seems fine. Is that what you mean? I guess when I'm done editing the footage, I have to convert it to H264 MP4 format, right?
    What would you suggest in the way of a camcorder? I want HD, editing capabilities, AppleTV friendly, etc. I love the size of the Sanyo Xacti HD1010. Any ideas?

  • G6t-2000 CTO 802.11ac compatible?

    Hello!
    posted this in the wrong forum before. figured id give here a try. 
    i was just wonder if theres a mini PCI card for my G6T-2000 CTO that supports 802.11ac. all i could find was an intel one but i wasnt sure if it'll work. the model numbers Intel 7260HMW IEEE 802.11AC. link below.
    Intel 7260HMW IEEE 802.11AC
    Thank you!
    -Victor

    Nope. If you put that in your computer it will refuse to boot up. TMK, there is not an 802.11ac wireless card offered by HP at this point, and they will not issue BIOS for older machines allowing use of 802.11ac adapters once they do start offering them on newer machines.

  • How compatible are the airport express and extreme with the 2wire routers?

    I have been spending ages trying to set up our connection with a linksys router due to the lack of signal from our 2wire and they just do not want to co-operate.  The 2wire is a 3800hgv-b with a special firmware from at&t to be able to be used for tv purposes as well and also so they can control their users.  The signal barely leaves the room its in and it seems like this would help boost it to other parts of the house.  Is this going to help my problems? Basically I don't want to use the 2-wire as a router just the AX and the 2-wire would just be used for tv.  I don't know how familiar everyone is with U-verse but we were given three plug links which all connect to the same network.  One goes to the 2-wire and we use one for a wired printer and I'm curious if i could use the last one to connect to the AX and broadcast it from upstairs.  The linksys struggled with this because it couldn't act as an access point very well and it was better off with just setting up a new network.  Would it be able to act as an access point for the 2wire? Basically I'm just curious if this is going to solve my problems, or at least most of them. 

    I have been spending ages trying to set up our connection with a linksys router due to the lack of signal from our 2wire and they just do not want to co-operate.
    Since the "extend wireless network" feature used by Apple appears to be a proprietary function, it is extremely unlikely that an Apple device would "extend" or "repeat" the wireless signal that is being transmitted from your 2-Wire router.....if this is what you are asking here.
    If you were to use both an AirPort Extreme (connected directly to the 2-Wire by Ethernet cable) and an AirPort Express, then you would be able to configure the Express to "extend" the wireless network that is being broadcast by the AirPort Extreme.

  • How compatible is Sun ONE Message Queue with IBM Websphere MQ and at what version levels?

     

    Hi,
    Just check the "Troubleshooting Installation Problems section " at http://docs.sun.com/source/816-6453-10/windows.html#34247.
    If you still have problems in installation , you can post your question in the Sun ONE message Queue forum
    at http://softwareforum.sun.com/NASApp/jive/forum.jsp?forum=24

  • How compatible is the iPad's keyboard with the iPad2?

    Most of the reviews for the keyboard have been great - but I've noticed there's been one review that says that the keyboard could possibly damage the iPad2. Has anyone tried using the keyboard and if so - have you noticed any damage to it?

    Which keyboard do you mean?
    - The Bluetooth keyboard is just working with iPad 1 and iPad 2 without any problems. Just bluetooth, there could be no differences.
    - The original iPad Keyboard Dock from Apple is only working with the iPad 1. The iPad 2 is much smaller and not fitting into the dock correctly.

  • How compatible is Lion with Photoshop CS5 and Microsoft Office 2004?

    I can't see myself buying Lion, until I am reassured that it can be used with these applications. If not, Lion is a very expensive upgrade.

    Adobe Photoshop CS5 is listed here http://roaringapps.com/apps:table as working.

  • How compatible are CS5 photoshop files with CC photoshop files?

    If I save a photoshop file in CS5, will it open alright in Creative Cloud?

    If I save a photoshop file in CS5, will it open alright in Creative Cloud?
    It should be fine.
    Nancy O.

Maybe you are looking for