Sanyo HD2000 import of HD movie One method that worked.

Here is how I was finally able to import movies from my HD2000 into iMovie this evening. This was the first method that was successful for me. Your mileage may vary.
1) I broke down and paid $29.00 for QuickTimePlayer Pro.
2) I then converted my *.MP4 movies that had been imported by iPhoto previously, into a new folder
called "ProcessedMovies" with the same name and *.MP4 extension.
This was done with the FILE->EXPORT and
MOVIE to MPEG-4 setting.
The incoming movie inspector details were Format H.264 1920 x 1080 FPS=59.94 16.55Mb/s
The outgoing movie inspector details were Format AAC 352x288 FPS=30
This was after I docked via the usb port and camera menu options COMPUTER->CARD READER and iphoto imported all the original media.
This isn't quite what I want but it's a start.
The movies in iPhoto will play at full resolution on the Mac so far.
I haven't yet been able to get the movies into iMovie into a high def format (even at 30fps) I expect 30fps will be the best iMovie will support at this point.
--R
\

I purchased Steve Mullen's book "The Ins and Outs of iMovie '09" and in there was the fix for my primary problem.
When I docked, iPhoto was coming up and importing all the photos.
His tip on page 50 "If iPhoto Opens When you Plug in a USB Camcorder" was the solution.
Open Image Capture and change the General settings to "No Application" this fixed my big issue.
So far all the recording formats except two seem to import trouble free. (I tried a sample yesterday)
The 60fps (frames per second) I need to re-try. I had a sample of one of the low performance web formats (Don't recall), and got an error on it one time.... it may be a fluke.
However the 30fps full def HD, all the way down to SD video and Web based test images all imported fine.
I'm now taking my first stab at editing with iMovie.
(Total Newbie).
--R

Similar Messages

How to show one prompt that works for both Graph and Table views?

Have an analysis with a graph and a table. The information in the table and graph are different so cannot use a pivot table w/graph.
Each view has a view prompt for Year and Month (tried both separately and also as one combined column ‘201001’) so user can easily change months.
Too much data to use the slider because it will not graph.
Page prompt does not allow user to switch dates easily.
Since this will be a link from a dashboard, do not think making this a dashboard from a dashboard would be good so not a dashboard prompt.
Saw something about Master Detail linking, but does not appear to work with graph prompts.
How would the analysis be configured to show one prompt that works for both the Table and the Graph?
One prompt would change both the table and the graph.

Master Detail Linking almost works.
Table view can show all the results without error.
Graph view needs to be limited or errs with "Exceeded configured maximum number of allowed input records."
Is there a way to set the initial Master Detail Linking value to the top sorted value?

All-in-one printer that works with Airport Extreme (n)

Hi all,
I have recently bought an Intel MacBook and an Airport Extreme 'n'.
Now I am looking for a compatible all-in-one (multifunction) printer. I have been searching on the net all day till my eyes are sore.
I don't need to use it too often so am looking for a a cheapie under $120. I mainly need it for printing black and white, photocopying and scanning the occasional document.
Is anyone using one with decent quality or can recommend one?
I know about ifelix's list but am looking for a recommendation as well as one that is compatible...
thanks you...

I have looked around here, and just can't figure this
out, please someone help. I just purchased a 3180 hd
with my macbook. Was printing wirelessly fine with
my previous hd and new extreme. Now this one isn't
working and hp said that it is not a supported
wireless printer. Why on earth would apple sell this
printer then.
Could someone please tell me how to make this printer
work over my new airport extreme base. PLEASE
This is the problem with the new airport extreme(n). All the printers work when connected directly to your computer, it is when they are connected to the base station that there seems to be compatibility problems. I have ruled out buying the C3180 for this reason.
Someone may be able to help you. If not you will either have to connect it directly to your mackbook to use it or return it and buy one that is compatible.

No Wireless with Windows 8 on S205 (Win7/8 drivers) - I've read that there is a method that works...

Have read and tried methods suggested in numerous other posts including those for other Lenovo models.
Installed Windows 8 x64 clean install.
- BIOS updated before win8 install.
- Win8 WIFI switch cannot be turned on.
Installed newest wifi driver for Win8
- WIFI switch doesn't turn on.
Installed Win8 Power Management.
- FN+F5 toggles Win8 flight mode only.
- Uninstalled driver and tested with Win7 driver - no better.
Uninstalled Win8 Power Management and installed Win7 Power Management
- FN+F5 only lists a switch for Bluetooth.
- No better for Win7 PW and Win8 wifi driver.
It appears that some people have had success using a particular method but unfortunately it was described quite badly and failed to work in my case.
Can any of the experts or future experts please assist?
N.B. To save the expected post, the wireless hardware switch is on.
Thank you...
Solved!
Go to Solution.

Unfortunately Lenovo were no help and willing to say anything to get me off the phone - This will be my last Lenovo machine, entirely due to the support which has gone the same way of IBM - pathetic and useless. Sad I'm a huge fan of the machines.
Fortunately I was able to fix this after attempting many solutions, the solution was found HERE, which was overlooked in the beginning due to the title.
Windows 8 needs to be booted from BIOS environment not EFI for the wireless to function. To do this I had to reinstall Windows 8 in legacy mode.
QUICK STEPS for anyone else with the same issue.
1) Of course, backup everything you need to another drive.
2) On the Windows 8 installer USB, rename bootmgr.efi to bootmgrold.efi and the folder EFI to OLDEFI.
3) Before installing change your BIOS setting from AHCI to IDE
4) Boot the Windows 8 Installer USB and install.
5) During the procedure, delete all partitions and create a new one (and leaving the RESTORE parititon windows creates).
6) Windows will automatically install drivers and wireless can be used during the setup procedure.
N.B. Only drivers required were for APCI and CardReader. For this you need the Power/Energy Management (I recommend Win 7 version) and Realtek USB2.0 Card Reader drivers (again, Win7 recommended)
HTH and saves lots of time wasted with drivers.

A parallax scrolling method that works with PhoneGap

Hi,
I made a parallax scrolling page into a PhoneGap app, yet...maybe because scrolling is disabled in PhoneGap, it doesn't animated with "scrolled".
What workaround is there? Is there maybe something to un-sandbox about PhoneGap javascript?
Thanks in advance! So much fun making scrolling animations! (seems iOS 8 supports scrolling events in the new style webview too)
Here is some code:
var d = document.createElement("div");
sym.$(d).css({
position:   "absolute",
top:        "0px",
height:     "200%",
visibility: "hidden"
}).html(" ");
document.body.appendChild(d);
// prevent Edge Animate stage from scrolling
sym.getSymbolElement().css({ position:"fixed" });
// animation frame loop: check scroll position
// each frame and move animation accordingly
var lastScrollTop = 0;
var animate = function() {
var scrollTop = $(window).scrollTop();
if (scrollTop != lastScrollTop) {
lastScrollTop = scrollTop;
var maxScroll = $(document).height()-$(window).height();
var scrollPos = scrollTop / maxScroll;
// scrollPos is 0..1
sym.stop( scrollPos * sym.getDuration() );
requestAnimationFrame(animate);
requestAnimationFrame(animate);
So how to modify that to make scrolling animations in PhoneGap Build ?

Unfortunately Lenovo were no help and willing to say anything to get me off the phone - This will be my last Lenovo machine, entirely due to the support which has gone the same way of IBM - pathetic and useless. Sad I'm a huge fan of the machines.
Fortunately I was able to fix this after attempting many solutions, the solution was found HERE, which was overlooked in the beginning due to the title.
Windows 8 needs to be booted from BIOS environment not EFI for the wireless to function. To do this I had to reinstall Windows 8 in legacy mode.
QUICK STEPS for anyone else with the same issue.
1) Of course, backup everything you need to another drive.
2) On the Windows 8 installer USB, rename bootmgr.efi to bootmgrold.efi and the folder EFI to OLDEFI.
3) Before installing change your BIOS setting from AHCI to IDE
4) Boot the Windows 8 Installer USB and install.
5) During the procedure, delete all partitions and create a new one (and leaving the RESTORE parititon windows creates).
6) Windows will automatically install drivers and wireless can be used during the setup procedure.
N.B. Only drivers required were for APCI and CardReader. For this you need the Power/Energy Management (I recommend Win 7 version) and Realtek USB2.0 Card Reader drivers (again, Win7 recommended)
HTH and saves lots of time wasted with drivers.

MX 920 Printer Not Responding - One Solution That Worked For Me

I phoned Canon customer support and they walked me through fixing my problem. We use wireless LAN at the house.
Background:
I have a mac, my wife an iPad. We would be able to print a document, then after aprx 10 minutes I'd have to enter our router password again. Our home office was not so printer friendly. Our printer was located in an adjacent room aprx 25ft away.
Solution to OUR Problem:
Well, I finally phoned Canon Customer service and she ran me through a function test that printed out a report to check the signal strength from our router to the printer. Well, our signal strength was at 84%.
Here is the process they walked me through in order to see my signal strength and confirm my settings.
Click "Menu" , then click "Set Up" (the tool icon), then click "Device Settings", then click "LAN Settings", then click "Confirm LAN settings", then click "Print LAN settings"...then click "Yes" to Print Network Configuration Page
On that page verify:
1. that you have a IPv6 IP Address & Default Gateway (dont ask me how or what that all means...she just advised me that I should make sure that there is one in there...if there was not one in there then there was something wrong with my router or my actual connection/password)..
2. Signal Strength
She advised that it should be as close to 100% as possible.. Again, ours was at 84% and she said, "yup, thats your problem"..
Solution Day 5
The printer has been working flawlessly. I can print something out in the morning, go to the gym, come back an couple of hours later and I can print again...Before, I would have to re enter our router LAN password.
Hope this help some of you out...

Base Station Firmware: 7.2
Airport Utility: 5.2.1
Wireless Radio: 802.11n only (5.0 GHz)
Channel: Automatic
Wireless Security: WPA2 Personal
Under 'Disks' File Sharing is enabled with a disk password (as opposed to accounts or base station passwords). Guest Access is not allowed. The rest are the defaults.
Now I've been having interesting problems with USB external drives mounting on my iMac. One never did (but was always successful with FireWire) and a second one was inconsistent. The drive that I have attached to the AEBS at the moment is one that I finally made fully functional with my desktop so I don't know if that is related. I'm going to have to run a number of additional tests.
Note: my wireless is pure .n - not a mixed environment. I also had a speed issues with the iMac (wired ethernet) until I changed it from manual (100BaseT, full duplex for use with my old Belkin) to Automatic and re-enabled IPv6 which is enabled on the AEBS.

Slow Airport disk - one solution that worked for me

I reformated my USB disk to "Mac OS Extended" format.
Do not use "Mac OS Extende Journaled"
Now I have at least 1 MB/s transfer rate. Before I had just a couple of KB/s

Base Station Firmware: 7.2
Airport Utility: 5.2.1
Wireless Radio: 802.11n only (5.0 GHz)
Channel: Automatic
Wireless Security: WPA2 Personal
Under 'Disks' File Sharing is enabled with a disk password (as opposed to accounts or base station passwords). Guest Access is not allowed. The rest are the defaults.
Now I've been having interesting problems with USB external drives mounting on my iMac. One never did (but was always successful with FireWire) and a second one was inconsistent. The drive that I have attached to the AEBS at the moment is one that I finally made fully functional with my desktop so I don't know if that is related. I'm going to have to run a number of additional tests.
Note: my wireless is pure .n - not a mixed environment. I also had a speed issues with the iMac (wired ethernet) until I changed it from manual (100BaseT, full duplex for use with my old Belkin) to Automatic and re-enabled IPv6 which is enabled on the AEBS.

What is the best all in one printer that works with the iPad

The best all-in-one-printer to use with the ipad mini

Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
See the Airprint printers on the Apple store site:
http://store.apple.com/us/ipad/ipad-accessories/printers#!
Matt

How to make a movie in, Pages, that works when it is saved as a Word document?

I made a pages document, then saved it as a Word document, but the 10 second movie I saved in it doesn't play when you start it in Office and use it. I used an MP4, should I try to get something that creates a .WMV since PC doesn't play well with others?

I use Libre Office all the time. It can only "recognize" file formats that you have installed players for.
Install VLC media player (open source, cross platform) and it should be OK.
I have to wonder if your using the best medium for what you want to accomplish. What do you need besides the movie? Maybe you should be creating a web page? Certainly, HTML has far better support for embedding media in a document than anything else. Better as in will work on Windows, Linux, OS X, etc.

Question about synchronization the methods that work with Properties

Hello everyone
I have the following problem with the properties file and synchronization.
I read properties after the programm was started. And If the properties exist the programm load the properties (java.util.Properties) from the properties file.
Than I have make the possibility to change this properties in GUI and save it. That mean that the properties file will be used from two plases: the first at the beginning and the second in GUI.
I wrote the wrapper for properties, say ApplicationProperties.
I defined ApplicationProperties as the Singleton. At this file I defined
setters/getters for my variables. This class has also two methods
load properties or save properties. This two methods work with the propertiesFile the instance of java.io.File.
The first reads the properties with FileInputStream and the second save it to this file with the FileOutpuStream.
My question is, do I need to synchronize this two methods to make it thread save?
private File propertiesFile;
private void loadPropertiesFromFile() throws FileNotFoundException, IOException {
     FileInputStream input = null;
     try {
          input = new FileInputStream(this.propertiesFile);
          this.properties.load(input);
          updateSettingsFromProperties();
     } catch (FileNotFoundException fnfE) {
          throw new FileNotFoundException("Cannot find the properties file.");
     } catch (IOException ioE) {
          throw new IOException("Cannot read properties file.");
     } finally {
          if(input != null) {
               input.close();
private void savePropertiesToFile() throws IOException {
     FileOutputStream out = null;
     try {
          out = new FileOutputStream(this.propertiesFile);
          this.properties.save(out, PROPERTIES_DESCRIPTION);
     } catch (IOException io) {
          throw new IOException("Can't save properties.");
     } finally {
          if(out != null) {
               out.close();
}Thanks a lot for your advise!

Will you ever be reading or writing the same file from multiple threads at once?
Synchronisation can prevent this from happen, but does it ever happen at the moment?

Any known method that works?

Hello everyone, i have a question, is there a known method to make a entire webpage made on flash as2 or as3 to work when transformed by wallaby, if there it is i need a template to investigate it learn it and provide all feedback possible.
i mean to make all buttons work in simple navigation after conversion by wallaby.
thanks in advance
Xavo

but you can use iterators in WideString
Regards
Bartek

Methods that return more than one object.

Hello everyone,
I don't know if this has ever been proposed or if there's an actual solution to this in any programming language. I just think it would be very interesting and would like to see it someday.
This is the thing: why isn't it possible for a method to return more than one object. They can receive as many parameters as wanted (I don't know if there's a limit), but they can return only 1 object. So, if you need to return more than one, you have to use an auxiliary class...
public class Person {
   private String name;
   private String lastName;
   public Person(String name, String lastName) {
      this.name = name;
      this.lastName= lastName;
   public String getName() {
       return name;
   public String getLastName() {
       return lastName;
}So if you want to get the name of somebody you have to do this, assuming "person" is an instance of the object Person:
String name = person.getName();And you need a whole new method (getLastName) for getting the person's last name:
String lastName = person.getLastName();Anyway, what if we were able to have just one method that would return both. My idea is as follows:
public class Person {
   private String name;
   private String lastName;
   public Person(String name, String lastName) {
      this.name = name;
      this.lastName= lastName;
   public String name, String lastName getName() {
       return this.name as name;
       return this.lastName as lastName;
}And you would be able to do something like:
String name = person.getName().name;and for the last name you would use the same method:
String lastName = person.getName().lastName;It may not seem like a big deal in this example, but as things get more complicated simplicity becomes very useful.
Imagine for example that you were trying to get information from a database with a very complex query. If you only need to return 1 column you have no problem, since your object can be an array of Strings (or whatever type is necessary). But if you need to retrieve all columns, you have three options:
- Create 1 method per column --> Not so good idea since you're duplicating code (the query).
- Create and auxiliary object to store the information --> Maybe you won't ever use that class again. So, too much code.
- Concatenate the results and then parse them where you get them. --> Too much work.
What do you think of my idea? Very simple, very straight-forward.
I think it should be native to the language and Java seems like a great option to implement it in the future.
Please leave your comments.
Juan Carlos García Naranjo

It's pretty simple. In OO, a method should do one thing. If that thing is to produce an object that contains multiple values as part of its state, and that object makes sense as an entity in its own right in the problem domain--as opposed to just being a way to wrap up multiple values that the programmer finds it convenient to return together--then great, define the class as such and return an instance. But if you're returning multiple values that have nothing to do with each other outside of the fact that it's convenient to return them together, then your method is probably doing too much and should be refactored.
As for the "if it increases productivity, why not add it?" argument, there are lots of things that would "increase productivity" or have some benefit or other, but it's not worth having them in the language because the value they add is so small as to no be worth the increase in complexity, risk, etc. MI of implementation is one great example of something that a lot of people want because it's convenient, but that has real, valid utility only in very rare cases. This feature is another one--at least in the domain that Java is targetting, AFAICT.

Media Offline not offline and unable to re-import sound and movie files

I'm getting the dreaded red Media Offline screen and I've tried everything to fix it. To explain I am working on a movie with sound and various bunches of still images imported as numbered stills to be automatically converted to a movie for an exhibition. All well and I was bringing the finished project into Encore when something happened... I don't know, maybe it's because all of the files are on an external hard drive (LaCie) and I had to plug into the LaCie another harddrive with my CS4 install files on it to install Encore... Whatever it was it broke the connection and even though all the files are still there Premiere can't see them. And when I try and re-import them it gives me the message "File video dimensions (width/height) too large" even though it is the same project. And it gives me the same message even with the sound file. From googling I have tried: deleting .xmp files on the HD, repairing disk admissions, creating a new project in Premiere and re-importing the files to see if that worked - didn't work, still kept up the same "File video...too large" message and this is even after..re-updating the software (up-to-date but re-installed it anyway).
I can only think of two other things: it's the hard drive or to get CS6 somehow. Can anyone suggest something else to fix?

Well it can't be a codec problem either as I am mostly only using jpegs in numbered stills. anyone help?

How can I move an ArrayList from one method to another?

As the subject reveals, I want to know how I move an ArrayList. In one method, I fill my ArrayList with objects, and in the next I want to pick an arbitrary object out of the ArrayList.
How do I make this work??

You pass the same array list to both the method. Both method are getting the same thing.
void main(){
//create array list here
ArrayList aList = new ArrayList();
//pass it to a method to fill items
fillArrayList(aList);
//pass the same arraylist to another method
printArrayList(aList);
void fillArrayList(ArrayList list){
list.add("A");
void printArrayList(ArrayList list){
//The array list will contain A added by the previos method
System.out.println(list);
FeedFeeds : http://www.feedfeeds.com

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

Try this general troubleshooting procedure:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Sanyo HD2000 import of HD movie One method that worked.

Similar Messages

Maybe you are looking for