Sanyo XACTI FH1 slow motion video does not play on FCE

I have a Xacti FH1 that is capable of recording on 240fps and 600fps. I can import the files recorded on either format to FCE but when I try to preview it FCE crash. I can import the same files to imovie 08 and preview, edit and export it with no issues. Is it possible that imovie can handle this formats and FCE does not? Any help will be greately appreciated on how to make FCE work with this type of content.

You can't. FCE only supports 29.97fps or 25fps. The only way to do it would be to first convert it to one of these frame-rates, but such a drastic downscaling would look horrible after conversion. It might be better for your purposes to consider the jump to Final Cut Pro, which I believe can work with these frame rates.

Similar Messages

  • Slow-motion videos do not play as edited (fps) on Mac

    Hi all,
    I just received my iPhone 6 yesterday, and have been playing with the slow-motion video feature. I moved a few over to my computer using Image Capture, and they played fine in their slow-motion, 240 fps. However, the problem is that it doesn't play the video as it was edited on my iPhone (parts of it sped up, and parts of it slowed down). It plays the whole video in slow-motion, which can be a little annoying watching an entire video.
    Thanks, all, for any help!
    P.S. I'm using OS X version 10.9.4

    In Firefox, click Tools>Add-ons. Make sure the Shockwave Flash plugin is enabled and "Always activated".
    If that fails, see: How to perform a "clean install" of Flash Player in Mac OS X  in the Adobe Forums. That will clear out the pluigins and allow a fresh install with the new plugin.

  • 24 fps video does not play in CS5.5 source monitor without choppy motion

    Problem: 24 fps video does not play in CS5.5 source monitor without choppy motion. 30 frame will play fine. I took the same 24fps shot, using the exact same setup parameters, and played it in my CS5.0. No problem. I did them side by side and checked to make sure everything was EXACLTY the same. The 24fps shot played smoothly in the CS5.0 source monitor. Can anyone tell me what the solution might be to get the CS5.5 to play smoothly? When I rendered it on the timeline in CS5.5 it played smoothly on the timeline. Perplexed.

    Thanks Tood,
    Here's the other info. I am running CS5.5 on a windows 7 ultimate 64bit (service pack 1) OS. All of the recent updates have been installed on both the OS and the CS5.5. The source footage is H.264.mov from a nikon d7000 at 1080p 24fps. My video card is an Nvida GeForce GTX285. My processor is an Intel Core i7 3.33GHz with 12GB ram. I am running no third party codecs or effects. I am using the Mercury Playback engine GPU accelerator. I am using a DSLR24 frame project setting.
    Here is the problem: When I bring a 1920x1080 24fps.mov file into my DSLR24 frame project, or any project setting, in my CS5.5 and open it in the source monitor it plays as if it is trying to catch up; stuttering and skipping; it plays the same on the sequence timeline until I render it.  I get no error messages. When I bring the exact same file into my CS5.0, with the exact same project settings, it plays perfectly in the source monitor and on the timeline without rendering. When I bring in a 1280x720 24fps.mov or any other size file into my CS5.5 in any project configuration, it plays perfectly smoothly. Everything plays smoothly without renedering in the source monitors of my CS5.0 and CS5.5 except for a 1920x1080 24fps.mov file in CS5.5. The exact one that I need to play there.
    I would have no problem cutting in my CS5.0 if it intergrated with audition; which is why I bought the CS5.5.
    Thanks,

  • Video does not play on external plasma monitor

    Forum
    Here is my situation.
    I received footage captured with a Panasonic HVX-200, the specs are:
    29.97fps, Compressor: DVCPRO HD 720p 60, frame size: 960x720
    I use an Intensity Pro video card for monitoring on a 42" Samsung LCD. When the Intensity Pro card is set to HDTV 720p 60 (1280x720) the video does not play on the LCD, all I get is a still frame. When the Intensity Pro card is set to Intensity NTSC 720x486, it plays on the LCD but it's not at its best quality. The footage always plays fine in the FCP Canvas and Viewer windows.
    Any ideas on what may be going on?

    YOu need to be using DVCPRO HD 720p60 8-bit 59.94...and whatever DECKLINK header that is there for the card. I use the Kona 3, so mine is AJA KONA DVCPRO HD 720p60 8-bit 59.94. 59.94 because no matter what frame rate you shoot, the video stream is a 59.94 stream to the monitor.
    I hope that does it. No experience with the Intensity.
    Shane

  • Why video does not play when embedded in a PDF when viewed in Windows 8?

    I have a situation where video must be embedded within the PDF document and it was working for us using older versions of IE and on 32 bit machines and using acrobat X. When the same file was tested on Windows 8 it looks good and behaves well except the embedded video does not play. The same video (.mp4) will play on the new OS if it is not embedded in the PDF.
    Is this because the PDF is looking for a 32 bit flash player? Am I doing something wrong and/or is there a fix for this situation?

    Are you watching the pdf file from Adobe Reader?
    Windows 8 by default has a diferent reader for pdf files that does not support rich media elements.

  • The audio in app videos does not play.  It used to so I think it is an ios6 problem.

    Tha audio in app videos does not play.  It used to and works in Safari so my guess is it is an ios6 issue.  Any ideas?  Thanks.

    From Finder menu select Preferences -> Sidebar tab, and tick External disks

  • Ogv video does not play in Firefox 3.6 on a server

    I have successfully create an ogv video in Firefogg. The video plays on my local computer in Firefox. However, when I put the video on my university server, the video does not play any more. Here is a link to the video: http://www.iupui.edu/~streamit/huang/html5video/html5video.html
    I don't know how to solve the problem. Help. Many thanks.

    No problems here on Linux, that video plays for me.
    Try:
    * "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"

  • Video does not play in Viewer or Canvas

    Hi, I am new to Final Cut Pro. I just imported a couple of .mov files into FCP and have added them to a sequence. When I try to play the files on the Canvas, the video does not play (just shows the first frame). Same goes for Viewer window for an individual file. Help!

    You can't really use H264 directly in Final Cut Pro without a lot of hassle.
    Your audio has the wrong sampling rate. Digital audio for video is always 48000 kHz.
    Use QuickTime Player or Compressor to export a copy of your files using the ProRes codec with the correct audio settings. Bring those into FCP.

  • Doesn't display on whole projector screem - video does not play on projecto

    I am having truble with keynote and the projector. Keynote will only display as a little box on the projector - it will not fill up the whoole screen. Also, the vido plays fine on the computer when Kenote is running but it does not pick it up on the screen

    Ok - I have put on the "Size to fit Display" and I also changes the resoluton to a lower setting. I still get the keynot display in in about 1/4 of the whole screeen size when it goes through the projector. The video still does not play what is on the computer vs what is on the display

  • When I push play the video does not play.

    I have PP 2014. When I push play the video sometimes does not play. I just read here that the July 10th update may fix this, but the update keeps failing. Do i need to do something special?

    Does your hardware meet the minimum requirements?

  • MOV video does not play

    Hello guys,
    I have posted a H.264 video clip on my website. It's size is 31 MB. It had played great when I was testing it from my desktop, but once I post it, it does not play. "Q" logo shows up, then the very first frame of the video shows up, but that's it. It does not start to play. Here is the link:
    http://www.icebergfilms.com/Video_files/demo1.mov
    Any idea what I do wrong?
    Thank you so much

    Hi Kirk,
    reason I am doing all these conversions is to achieve the smallest file possible for internet streaming in shortest period of time. I am exporting my video from Final Cut Pro timeline as QT movie. Then it goes to Compressor to be converted to ProRes to make it progressive and to change frame size. Resulting file goes to Compressor again to be converted to H.264. ProRes is an intermediate codec saving a lot of compression time.
    I am trying to check settings during last conversion (from ProRes to H.264): Make it Fast Start and change the audio to AAC. But even though resulting file shows that video is AAC, the file is not any smaller at all. And video does not upload any faster with Fast Start on. So obviously, I am doing something wrong.

  • Video does not play using windows XP running on MAC BOOK PRO?

    noticed this problem with someone i know using a 15 MBP
    somehow it does not play videos using windows xp?

    Can you be more specific?
    What videos? What are you using to try to play them?
    Also, this forum is for Apple support. Since your problem is Windows related, you are not likely to get much help here.
    iMac G4 17" 1.25 | 1.25GB | 10.4.6 | AXP | 40GB iPod | 1GB Nano| Powershot S400 SLVR L7 | Blackberry 7100g | 512MB Shuffle | 30GB 5G iPod | 15" PB 1.67 DDR2

  • Video does not play: "Either windows doesn't support the item's file format......"

    Error message
    "Either windows doesn't support the item's file format or the content doesn't match the extension"
    I have both a Yoga and a Thinkpad 2. The Yoga is running Win 8 and the Thinkpad 2 has 8.1 Preview.
    I have copied multiple video files which are in either .avi or .mp4 containers.
    Some will play and some will not. I have installed all sorts of codec packages and players and the problem is the same. I though it might be a container problem so I tried to convert the file and the converter I used did not work.
    Searched the Internet and nothing really useful was found.
    Then I discovered a common thread. In the files that played, the codec information displayed when checking in properties and the ones that did not play, did not have the information.
    I have a video file on a USB flash drive and checked the properties and the information was there and I could play it from the flash drive. I copied it to my desktop and the file would not play. In checking, the codec information was not present.
    There seems to be an error in copying files where the requisite codec information is not being transferred.
    I have tried this multiple times and multiple permutations of transferring. Sometimes it will play from the desktop and will not play after transfer to the microSD card.
    Each time when it plays, the information is there and each time it does not play, the information is not there.
    Sal

    The problem is the period at the end. This system assumes it
    to be part of the url. I should have put a space and the end of the
    url before using a period to close the sentence. try this one:
    http://www.aaew.org/intro.swf
    http://www.scofieldministries.org/webtest/mv1.swf
    http://www.scofieldministries.org/webtest
    Please note that just the home page and supporting files have
    been loaded to the test server.
    Thanks,

  • All kind of video does not play smooth or else it lags badly on my late macbook pro i7 Quad core 2.4 Ghz, 4GB Ram help me

    i am having this problm badly , as i am freelace Video Editor for that i have to show the video work to my clients and when i play MP4,AVi,Mk4,Mpeg, or all kind of video formates it lags while playing
    what to do ?
    although it's the high conf. machine in macbook pro segment
    however it does not play VIDEO

    Hey Cris from London,
    I would try out the recommended steps in the following link:
    OS X Mavericks: If your Mac runs slowly
    http://support.apple.com/kb/PH13895
    Let us know if any of the steps within resolved the issue.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • Emailed video plays on iPhone, but web download of same video does not play

    I have an MPEG-4 video (mp4v format is all I can tell from VLC or QT Pro). If I email this video to myself on the iPhone 3G, it downloads from the mail server and plays just fine. However, this same video will not play via HTTP on the iPhone 3G. I have tried serving it from a PHP download script and just accessing it directly from a web directory.
    Any ideas why the same file would behave differently when playing via these two different invocations? Does the iPhone require the file to have some kind of embedded streaming information to be played via HTTP?

    take a look through this forum, and you'll see a couple of users that had to change the .htaccess on their webserver in order to stream video files.

Maybe you are looking for

  • FROM DATABASE INDX: What is this and how this it work?

    Hi, I have the following statements in one of the programs that I am modifying:     INDX_KEY-FLAG = 'SP'.     INDX_KEY-USERA = SY-UNAME.     IMPORT DATA_TABLE FROM DATABASE INDX(SD) ID INDX_KEY. What does the last statement mean? How is it able to fi

  • Out of stock item STUCK in cart!

    Tried multiple browsers and OS's. There's a single item in my cart and it's OOS. When I click "Remove this item" it never actually leaves my cart. I can't actually make any purchases until this is fixed because when clicking "Check Out" it wants you

  • Budget validity error wen re-ordering PO- PO is error in process

    Hi all, SRM 5.0 ECS. I am facing few issues related budget check in PO . I tried adding a new line item in PO  to do a PO increase,the PO goes in error in process.When I see RZ20,the alert details show the following message: BUDGET VALIDITY FOR DATE

  • XML issue

    I trying my hands on xml i am new to xml and learning i read the code and tried executing it : CREATE TABLE XMLTABLE OF XMLType; create or replace function getClobDocument( filename in varchar2, charset in varchar2 default NULL) return CLOB determini

  • Powerbuilder and Java

    On a wider note I'm very surprised that Java hasn't catered for extending base classes and still be able to keep the inheritance chain. If I compare this with Powerbuilder for a second, their Foundation Classes all come with an empty extension object