Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

Similar Messages

  • Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

    pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
    how cn i solve this problem..
    pls help..thnx
    my spec:
    AMD Sempron 2400+
    Epox 8rda3i
    Seagate 80gb
    Palit GeForce 6600gt
    Creative Sound Blaster Audigy Value 24-bit

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • About my Sould Blaster Audigy Value in Vi

    After installing the latest driver for Sound Blaster Audigy Value (Vista)
    i can only set 24 bit / 48Khz in the windows audio resample rate
    how can i set to 96khz?
    Besides, my bundled driver can't work in vista with this driver. Can anybody tell me
    how to solve this problem or tell me when will the next driver for this card be released? thanks a lot

    After installing the latest driver for Sound Blaster Audigy Value (Vista)
    i can only set 24 bit / 48Khz in the windows audio resample rate
    how can i set to 96khz?
    Besides, my bundled driver can't work in vista with this driver. Can anybody tell me
    how to solve this problem or tell me when will the next driver for this card be released? thanks a lot

  • SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

    (ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
    CONTINUE ON-
    Download RAR file with ISO inside and install if you don't have the installation CD
    installation cd with EQ download: http://files.filefront.com//;689430;;/
    If you do or after you finish downloading goto step A.
    A) Take your Creative Driver/Install CD, copy it to your hard dri've.
    B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
    C) Set it for Windows XP SP2.
    D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
    E) Restart when told to
    F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
    G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
    Message Edited by jeepbme on 03-08-200708:50 PM

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Creative Sound Blaster Audigy Value/SE/LS Driver 01.04.0

    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit Vista Beta Driver 0.04.0055
    Yeah, 32-bit, wooo.
    When will a 64-bit version be available?

    Has anyone tried the "AMD64" Driver for the Audigy Value (I assume this is the SE?) that is on the bundled CD?
    I tried different driversets from the download/support site to no avail.
    I didn't think about the CD driver until I got to work this morning.
    Really wishing I picked up the Li've! (yesterday) instead of the Audigy Value now
    ...expected this card to have a better chance, especially with "x64 drivers" on the box.
    Oh well, I'll give it one more shot tonight with those CD drivers... hopefully something will work.Message Edited by abz on 2-07-200604:08 PM

  • Audigy Value: true 24-bit suppo

    Hello. Does the Audigy Value have true 24-bit support? I see a Creative application named "Device Control" that has some 24bit options, but I don't know if these are correct. Is 24-bit supported by software or hardware? If I change the option in "Device Control", will Winamp play in 24-bit's Thanks!

    chapas wrote:
    Hello. Does the Audigy Value have true 24-bit support? I see a Creative application named "Device Control" that has some 24bit options, but I don't know if these are correct. Is 24-bit supported by software or hardware? If I change the option in "Device Control", will Winamp play in 24-bit's Thanks!
    Yes audigy value has 24 bit support, winamp and all cd audio only support 6 bit,except HDCD it suppports 20 bit but only when you play it in HDCD player, and in windows you can play it using Windows Media Player 0Message Edited by Clickm3 on 04-08-2006 2:20 AM

  • FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

    FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

    You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
    * for information on the options available see [[Updating firefox]] <--- clickable link ---

  • Erorr with Creative Blaster Audigy Value

    hi
    i have one
    Creative Blaster Audigy Value.
    but when im run creatvie graphic equlaizer see this erorr :
    Graphic Equalizer
    The audio device supported by this application is not detected. The application will exit.
    OK
    what am i doing?

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Windows Vista Ipod Nano Device Driver

    My new Windows Vista asks for ipod driver software & cannot find it on CD nor hard drive. I cannot sync with itunes. Where can I get the driver software?

    Well its surprising to know that! But even  have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .

  • Windows 8: Bit Locker encrypted drive "Access Denied" external drive

    I rebuilt my computer and installed win 8.1 pro.  Now my external drive comes up as an empty drive with "Access denied".  Here is the kicker: I had turned off bitlocker on the external drive long ago as it interfered with automated backups.
    Running the commands suggested here:
    https://social.technet.microsoft.com/Forums/windows/en-US/738c1760-c96d-430f-9ae6-1f28f5c60998/windows-8-bit-locker-encrypted-drive-not-found-or-access-denied?forum=w8itprosecurity it shows the bitlocker but as unlocked.  Drive still shows empty.
    Any suggestions?
    Thanks,
    Markus

    Ahh, turns out to be permission issue not bitlocker (or maybe bitlocker caused it to lose permissions, don't know).
    Opened MyPc, right click on drive ->properties->security->advanced and selected apply to all.
    Markus

  • After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    additional info.
    I have found the correct error definition in english.
    "can not start the device (Code 10)"
    I have updated my bios to the latest version.
    I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
    I have tried to uninstall and reinstall all webcam drivers - no luck

  • Windows Vista vs. Sound Blaster Audigy Value = Problem

    I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
    Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
    Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
    Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
    I will be extremely thankful to you if you please provide a solution to these problems.
    Thank You........

    altho i tried this with audigy se u might wanna check this
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

  • SB Audigy Value Windows XP applications All functions includin What U Hear working Proper

    I have SB Audigy Value Card (SE/LS/ Li've 24 bit)Windows Vista 32 bit SP Classic Windows XP applications, Creative EAX SettingsCreative Graphic EqualizerCreative Speaker SettingsDevice Control And XP Drivers 5.2..54 Driver Date: 3.06.2007 Digitally Signed All the settings including "What u Hear" function work flawlessly under 4. system. (I didn't try 5./7. but I think it should work) I just mixed the applications from old and new driver packages and tricked the set-up program to install the XP drivers instead. I'm not a sound expert but I'm much more satisfied with tihs driver especially while listenig to music. I didn't try it with any games so I don't know. Download Link:http://rapidshare.com/files/9395098/...e0077.exe.html All the files included in this package are Creative's property.

    I've spent ages searching the forums and can find other people who have experienced the problem but have yet found a fix. They've also explained the problem better so I'll try and make this a little clearer also.
    When using Ventrillo first people can hear me fine in Ventrillo but an awful sound (described as the sound of 000 demons) in Counter Strike.<
    When using CS first people can hear me fine in Counter Strike but the screeching sound is heard in Ventrillo.<

  • Audigy SE & Windows Vista Home Premium - No sound after sl

    Hi Everyone,
    I installed an audigy se card in my media center since the onboard audio wasn't supported in Vista anymore. Sound (at least 2.) seems to be all good until I put the machine to sleep while in Media Center. When I wake up the machine, there is no audio in media center, regardless of how much I fiddle with the volume/mute buttons. The only way I can restore audio is if I quit media center and reopen it (for a media center pc, this is sort of a pain).
    Has anyone encountered this and what was the solution? Thanks in advance!
    Here are my machine specs:
    - 2.54 GHz P4
    - ASUS P4PE-BP
    - GB RAM
    - Windows Vista Home Premium
    - ATI Radeon 9800 Pro
    - ATI TV Wonder Elite
    - Audigy SE (with latest vista drivers)

    I have exactly the same problem, with exactly the same solution (quit and restart Media Center).
    Does anyone have any ideas? I have looked at BIOS options as well as power options, driver and audio in Vista.
    I find it odd that restarting Media Center fixes the problem. The audio card must have awoke from sleep sucessfully? No reboot or anything else is needed.
    Athlon 64 3000+
    ASUS A8V-VM SE
    GB DDR 3200
    Radeon x550
    Audigy SE
    Netgear WG3T
    Kworld dual tuner 30 PCIe
    Only similarity is Media Center and Audigy SE!?!
    Latest drivers for everthing.
    Thanks!Message Edited by DarrenGraves on 06-4-200704:06 PM

Maybe you are looking for

  • Trouble getting "back to my mac" to work on new Air - and really need this functionality

    This is sort of one of those "asked and answered" threads, but I wanted to share my solution. I love being able to see my other computers remotely. I don't think Apple sells the functionality of remote desktop enough. I have a laptop and I also run t

  • How do I keep copies of all messages?

    Thius may be an easy one, but I can't figure it out. I have three email accounts: 2 IMAP email accounts and a .Mac account. Since the first two are IMAP, when I delete it on my computer, it gets deleted on the server. If I don't delete them, I very q

  • Classloading settings in Weblogic 11g

    Hi Experts, I would like to know how classloading policies can be set in weblogic application server. I am facing some issues with the class loading. I have an enterprise application which contains an MDB, EJB, and .WAR. I am installing it on a weblo

  • SJSWS7.0u8 use local hostname in logs

    I am trying to add the local host name into my access and error log files, in Sun Web Server 7.0u8, in two ways: 1. Add the local host name as part of the log file name on disk 2. Add the local host name into the custom log format of the access log.

  • Within iTunes is there a way to autiomatically delete duplicate songs

    Within iTunes is there a way to automatically detect and delete duplicate songs - i.e. I know how to find and identify the duplicates but do not want to have to remove them one by one?