SAP 2007 upgrade - does not allow to change old documents

We have recently upgrade to SAP 2007 from SAP 2005 and now it does not allow to change any of the old documents which was already in the system before upgrading.
Error message
Another user modified table [Message 131-183]
It gives the same error even after restarting the SAP server where SQL is runing and in all the user accounts including manager.
Thank You
Sanjaya

Hi,
Check the Note No. : 1301335 regarding the issue mentioned by you.
You probably need to get the issue investigated on the support side.
Regards,
Jitin
SAP Business One Forum Team

Similar Messages

FBV0 Post only - do not allow to change parked document

I had FBV0 access to post parked document, no complaints.
But, i should not be able change parked document.
can we restrict FBV0 to Post only - do not allow to change parked document ??
Thanks.

Dear P1023,
To segregate the authority to park and to post, i suggest that you
either
- use the exit provided by SAP note 361420 (BTE 1140) to deactivate the posting/
parking button depending on users.
OR
- set up a validation to prevent a users from posting/parking
OR
- Use workflow to release the park documents.
I hope this helps.
Mauri

FB02 does not allow to change Document Header Text

Hi,
We are upgrading to ECC 6.00. In T Code FB02 we are not able to change the document header text (BKPF-BKTXT). This feild is grayed out.
We have done the necessary configuration in Document Change Rules, Document Header- allowing BKPF-BKTXT for change.
We can see the entry in Table V_TBAER. Please help me to solve this problem. We need to have this feild available for change.
Regards
Santosh Hegde

hi Santosh,
I understand that you can see the entry (BKPFT-BKTXT) in V_TBAER, but there are two small things to consider: if you doubleclick the line (in V_TBAER), there are two checkboxes, where the first one has to be ticked (field is changable), if the second checkbox is ticked as well, it means the field can be changed if the posting period is open. pls. check just in case...
if it does not help, I would suggest to open an OSS call about this problem (I did search on my own, but no luck), could be some special SAP error.
ec

Does not allow to change source system in Variant

Hi Gurus,
I am creating a variant for the program RSIMPCUST, but it does not allow me to change source system name. It is showing me gray color. Do you how to fix this issue ?.
Thanks
Liza

Hello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo.

The RFX before upgrade does not allow me to add items from catalog

hello gurus
I have a problem with the RFX, we did an upgrade to SRM7.0 from SRM5.0.
The RFX that existed before upgrade in the server does not allow me to add new items from catalog.
each RFx I created after the upgrade works fine.
My client needs to work with the RFx still open, add items and make bids.
I have reviewed the upgrade guide and found nothing regarding an update of purchasing documents.
I have
SRM 7.0 SPS03 EHP1
MDM 7.1 SP06
MDM catalog 3.0SP10

in SRM 5.0 the system was MDM catalog. Actually, after the upgrade , i have SRM7.01 with MDM catalog.
i donn´t know if it is about version, SP or compatability issue, but i believe the upgrade not affect the purchaser documents.
Those look as locked to modify. on tap Position, the buttom ADD LINE, only i can see Position, not anymore option like MDM catalog, free text.
it is a big problem, because the client has documents opened. i need to resolve this issue. Actually i am working in a sandbox system, but i afraid to have the same problem in PRD system after upgrade.
regards

ITune does not allow to change file names

greetings bros' since a couple days ago I notice that my iT does not allow me to edit the files and sometimes neither recognize new files or folders.
Any clue why this??
muchas gracias
LAB

Something else that may come in handy is this wonderful program and it is free, and no I don't own the company. It takes a bit of time to learn it, but worth the effort. You can edit tags for tracks one by one, or look them up in several databases, including Amazon and discogs, etc. I really like to pre-clean my tags before adding the files to my library since they often get scattered about, and depending on the source, may not even have track titles, only file names.
Here is where to get this gem:
http://www.mp3tag.de/en/

Quicktime does not allow to change video position from streamed video

I just wanted to watch the newest Apple event stream. For many ears I have watched them typically from Mac as they works from there perfectly.
Now I installed quicktime for Windows (without iTunes) and I watched 34 minutes from the event. Then suddenly the sound went off from the quicktime. I tought the system sound went and I checked the volume and other player and they worked fine.
Then I tought it was about streaming problem and I allowed it to continue to 39 minutes. Then I tought I could scroll backward to position where the sound went off. But I couldn't at all. I can drag the position slider somewhere, but it always jump back to the place where it is streaming. When I stop mouse, it jumps back to current position. So if I keep mouse cursor moving and dragging same time the slider, it moves.
Neither I can not start a video (any video, was they a trailers or Apple event videos) and jump to the known position to continue watching.
So to me if I would now like to watch the latest presentation, I should watch first 40 minutes again. As I am not allowed to rewind to wanted position.
I tried this on my laptop as well and I got exactly the same problem (the scrolling).
Is it really so that Windows Quicktime does not allow rewind/forward functions at all on quicktime videos?
Is there tweaks to get that possibility as I do not want to watch 40 minutes and be sharp when it comes so I can continue where I left and not miss the position and never could rewind back?

QuickTime Pro does not allow to make video capture from desktop - only from camera. How can i solve this problem?
Use the QT X.1 Player to capture desktop video. QT 7 Pro does not and never has had this feature which was first introduced in the QT X.0 Player.

NWDS does not allow file change.

Hello friends,
I am developing an Netweaver ISA eCommerce application. I got a problem to change one file of this application. I have opened my NWDS and I changed some files (the activity was created to put the changes) but one of the files that I must change does not accept the modification. I mean, I can not edit that file. If I remove the write protection, the NWDS allows the change, but this way is not correct because the file changed does not go to the activity.
I have already seen this problem before and I solved it through an "edit" command on DTR perspective (right button over the file). But this option is not available at this time.
Can anyone help me?
Thanks!
Rodrigo.

I have found a good way to solve the problem. I removed the DC from client and I created it again. After that, NWDS allowed the file editing.
I do not know why it happened but it seems to be a bug on Developer Studio.
Regards,
Rodrigo.

Crystal Reports XI does not allow to change Table to SQL command?

I have report that has Table in Datasource and this table used in report and all fileds are mapped. I need to change table to SQL Command with the same result set of collumns. When I try to Update in Set Datasource Location - it does not work. CR XI allow to update Command to table but Table to Command just do nothing.
What I have to do or how I can do it?

Alexander,
That's probably the "Best" way to do it, and long term you'll want to start adding BOE to your work flow.
If you want to get around it, here how:
1) MAKE A COPY OF YOUR REPORT AND WORK FROM THE COPY!!! This involves some a good deal of destruction before you get into reconstruction.
2) Once you have created your command, remove the table.
3) Now the fun part... Go through report and manually change all references to the 1st table...
   report fields
   formulas
   selection criteria
   groups
   the whole 9 yards...
A short cut for the future... If you make all of your formula copies of all of your fields ( fCustomerName = {Table.CustomerName} ) and then only use the formula version of the field in the reports, you can make these changes very easily. (All you have to do is update the one set of formulas.)
Also as a side note before you get started... You may want to think twice before you mix commands with tables. You loose the server side filtering and grouping on the tables when you do that. So if you have several tables, you are better off doing the whole thing in one SQL command, do all of your filtering and sorting there and use it to replace ALL of your tables.
Basically, Graham's way is the easy way... Assuming you have access to the BOE.
Jason

LightDM-devel does not allow to change desktop environment

Hi,
I'm new to Arch and I'm trying LightDM under systemd as my display manager. I don't know if this is the right place to ask about it, since it involves a package from AUR but if anyone can help me, I'll appreciate it.
I am currently using XFCE4 as my desktop environment. Since I need to switch user and language quite often, the current LightDM version available in pacman does not work for me since it has a bug that prevents it from reading the language selection correctly (https://bugs.launchpad.net/lightdm/+bug/1019314). Therefore, I'm trying the development version available in AUR which corrects the language problem but introduces a new one.
Because I am new to systemd and LightDM, I'm afraid I have ask the following newbie question. On the first time that I log in, I am able to select language and desktop environment but if I log out and try to log in again, I notice a few strange things. First of all I see that the user name is in bold letters, as if the user would be still logged in. I also notice that I am not longer able to change my desktop session or language, but if I select another user I am able to do it (unless of course, I have already logged in witht this second user, in which case the problem is the same). If I reboot or restart lightdm, I am able once again to select session and language but just like before, only once until next restart. Is this the normal behaviour of lightdm or should i report this as a bug?
Please, let me know if I'm omitting any important information regarding my system or configuration that may be responsible for this behaviour.
Last edited by pedroobv (2013-08-02 22:46:20)

Hello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo.

I does not allow to change my to change my questions

help

Hello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo.

Dropdown by key does not allow to change values

Hi experts,
I have drop down by key and input field in ALV coulmn as cell variants.
The input field is editable but i cannot change the values of drop down. The list of drop down is filled.
Could you plz suggest me some solution.
Regards,
Arti.

WHEN 'FIELD'.
        CLEAR lr_col_header.
        lr_col_header = ls_column-r_column->create_header( ).
        lv_field_header = zcl_zxa_str=>get_otr( 'Z45/FIELD_HEADER' ).
        lr_col_header->set_text( lv_field_header ).
        lr_col_header->set_tooltip( lv_field_header ).
        CREATE OBJECT lr_drdn_by_key
          EXPORTING
            selected_key_fieldname = ls_column-id.
        lr_drdn_by_key->set_selected_key_fieldname( 'DRP_DWN_VALUES' ).
       lr_drdn_by_key->set_key_visible( abap_true ).
        wd_this->add_cell_variant( io_column              = ls_column-r_column
                                   io_cell_editor         = lr_drdn_by_key
                                   iv_variant_column_name = 'CELL_VARIANT'
                                   iv_variant_key_value   = 'DROPDOWN_BY_KEY' ).
        CREATE OBJECT lr_input_field
          EXPORTING
            value_fieldname = ls_column-id.
        wd_this->add_cell_variant( io_column              = ls_column-r_column
                                   io_cell_editor         = lr_input_field
                                   iv_variant_column_name = 'CELL_VARIANT'
                                   iv_variant_key_value   = 'INPUT_FIELD' ).

Functional Area does not allow to change in CJ20N initially

We are on ECC 5.0 an have made fields Functional Area as required field along with other fields (e.g. Company code, Profit Center, Dates etc.) in Project Definition.
During project creation, all the required fields in Project Definition shows up for edit except the Functional Area. Functional Area field is greyed out. After I populate all the required fields, Functional Area fields shows up for edit before save.
Does anybody have encountered this problem? Your help is truely appreciated.

Hi Sanjaya,
Company code is a superior structure element and as such you need to define it first and than go ahead for selecting Functional area.
Due to this logic, first system prompts you to choose company code,profit center etc. and once the values are entered into the internal table for project structure and project controlling it provides option to choose lower level structural elements like Functional area.
Regards
Vikas
PS: Give points for a helpful solution

Mail lost all settings and does not allow to see old messages

One day I launched mail and it appeared as if it was starting for the first time. I aborted the procedure, rebooted and relaunched mail but again. So I regave all the necessary parameters. Then I noticed that Mail had actually kept all the previously custom folders but would not show -a part from the most recent ones- all older messages in Inbox. I looked into Library/Mail/mailboxes and found the missing messages but whenever trying to reimport them into mail got the message that Mail could not find messages in a format acceptable to Mac OS. Actually the messages can be opened with the Mail (but not imported) and have extension .emlx
As an addtional info, the problem appeared shortly after I had switched hosting service but I do not see how this could have affected mails sitting in my hard disk.
It should also be noted that I am receiving and reading new mails without problem.
Any suggestion on how to recover my messages and have them again accessible in my Inbox?
Thanks.
Stefano

What you’ve described could be the result of having set up the account differently and Mail not recognizing the account folder already present in ~/Library/Mail/ — see below a more thorough description of this particular issue. If this is a POP account, the most recent messages in Inbox might appear to have been preserved because they were still on the server and Mail downloaded them again as if you had never set up this account in Mail before.
Under some circumstances (e.g. lack of available disk space, filesystem corruption, repeated crashes), Mail may discard the current ~/Library/Preferences/com.apple.mail.plist preferences file and create a new one. This file is where all the account settings are stored. As a result, all your non-.Mac account settings (but not the messages themselves) are lost. If you had a .Mac account, its settings would appear to have been preserved because Mail would set up that account automatically using the System Preferences > .Mac settings.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what’s it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), quit Mail if it’s running, and make a backup copy of the ~/Library/Mail folder, e.g. by dragging it to the Desktop while holding the Option (Alt) key down, just in case something else goes wrong while trying to solve the problem. This is where all your mail is stored.
There are three ways you could have solved this problem (#2 is what you did):
(1) Restore ~/Library/Preferences/com.apple.mail.plist from a backup if you have one. Mail shouldn’t be running while you do this.
(2) Set up your mail accounts again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done. You’ll also have to re-configure most of your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
(3) Mail may have renamed the old preferences file to com.apple.mail.plist.saved. If that’s the case, you may try trashing the new com.apple.mail.plist and renaming the old com.apple.mail.plist.saved back to com.apple.mail.plist. Again, be sure Mail isn’t running while doing this. Given the circumstances, I would expect com.apple.mail.plist.saved to be corrupt, but apparently that often is not the case and the settings can indeed be restored by just renaming it back to com.apple.mail.plist.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.
<hr>
For each mail account, Mail creates a folder in ~/Library/Mail/ whose name starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server.
When re-creating com.apple.mail.plist, setting up an account with a username and an incoming mail server that exactly match one of the already existing account folders in ~/Library/Mail/ causes Mail to automatically recognize and reuse that account folder. If the username and/or the incoming mail server are different and don’t match an already existing account folder, however, a new account folder is created from scratch, that account behaves as if it had never been set up in Mail before, the old account folder is simply ignored, and the messages it contains become inaccessible other than by manually importing them or setting up the account again.
If you have more account folders in ~/Library/Mail/ than accounts in Mail > Preferences > Accounts, that means some of the account folders have been created anew whereas others are being ignored by Mail (and hence, you don’t have access to the mailboxes and messages stored within them). You can, however, import their contents doing File > Import Mailboxes, choosing Mail for Mac OS X as the data format, and following the instructions. You can get rid of the unused account folders afterwards.
Pay attention to the instructions that Mail displays when choosing Mail for Mac OS X as the data format. In the next step, Mail wants you to select the folder that contains the mailboxes to be imported (i.e. the folder where the *.mbox folders to be imported reside), not the *.mbox folders themselves nor the Messages folders within them. If you select the wrong folder, Mail says “No valid Mail for Mac OS X files were found” because it cannot find any *.mbox folders within the folder you’re selecting.
Alternatively, you may try re-creating com.apple.mail.plist again and this time use the exact same username and incoming mail server that Mail used to name the old account folder.

System not allow to change planning plant

Hi Experts,
My problem is I changed company code , maintenance plant & planning plant in old system as per client requirement. They are using same system from last 4 years. I changed all require setting in customization but now problem is that in equipment task list system does not allow to change the planning plant in header data of IA02 T code. I updated the new planning plant in Function location master,Equipment master , Work center & assign it planner group but even system shows the old planning plant in task list header data. System shows the planning plant data in display mode.
Pl advice from where system link the planning plant field in task list header data.
Thx in adavance.
AVI DDS

Avi
Pete is right. There is no way you can change the planning plant in the Task Lists
Task list creation is done for a planning plant & you will not be able to use the existing tasklist for your updated equipments having different PPlants.
The only way to proceed is to create new tasklists
Delete the old assignments of the tasklists to the maintenance item & reassign the new tasklists to the existing items
In case you dont want the tasklists in the system itself, you will have to delete the tasklists - ie mark the deletion indicator in the change mode & archive the TLs.
Regards
Kartik

SAP 2007 upgrade - does not allow to change old documents

Similar Messages

Maybe you are looking for