SAP 4.6C Installation in Cluster error - Oracle 10g HPUX 11.23

Hi all,
We are installing 4.6C in oracle 10g/hpux 11.23 in a cluster environment in primary node.
During the last phase of installation, I get the below error.
INFO 2008-05-05 10:53:02
    Starting up the SAP System
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyCoprocessCreateAsUser:300
    Creating coprocess /bin/sh /home/r3padm/startsap_dbciR3Pd_00 as
    user r3padm and group sapsys ...
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyGroupIDGet:100
    Group id for group sapsys is 201.
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyUserIDGet:300
    User id for user r3padm is 7029.
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA ExecuteDo:0
    RC code form SyCoprocessWait = 127 .
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA ExecuteCheck:0
    Exit code from /bin/sh: 127.
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-05-05 10:53:02 InstController Action:0
    Step DBR3START_IND_ORA could not be performed.
ERROR 2008-05-05 10:53:03 Main
    Installation failed.
ERROR 2008-05-05 10:53:03 Main
    Installation aborted.
But I am able to start SAP manually using startsap and its successfull.
Can someone help me, what the above error is?
Thanks & Regards
Senthil

Markus,
I read the note, and also I have installaed 4.6C/oracle 10g/hpux11.23 for more than 4 servers and it was successfull.
But this time I am installing in a cluster environment. So I am facing this issue. When I checked in the install directory with ls -lrt the last file isdatabase.log
INFO 2008-05-06 16:02:43 RFCRSWBOINI_IND_IND CRfcOpen:0
    RfcOpen() was successful.
INFO 2008-05-06 16:02:44 RFCRSWBOINI_IND_IND CRfcPing:0
    Pinging of RFC destination was successful.
INFO 2008-05-06 16:02:45 RFCRSWBOINI_IND_IND GetSaprelease:0
    46C
INFO 2008-05-06 16:02:46 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:48 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:49 RFCRSWBOINI_IND_IND DeleteRow:0
    Deleted: 1 rows
INFO 2008-05-06 16:02:50 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:50 RFCRSWBOINI_IND_IND CleanupSAPEntries:0
    Deletion of 0 SAP rows
INFO 2008-05-06 16:02:52 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
ERROR 2008-05-06 16:02:53 RFCRSWBOINI_IND_IND StartJob:0
    Job RSWBOINS_JOB could not be started.
ERROR 2008-05-06 16:02:53 RFCRSWBOINI_IND_IND InstallationDo:0
    Phase failed.
ERROR 2008-05-06 16:02:53 InstController Action:0
    Step RFCRSWBOINI_IND_IND could not be performed.
ERROR 2008-05-06 16:02:53 Main
    Installation failed.
ERROR 2008-05-06 16:02:53 Main
    Installation aborted.
dcecpn0:root >
Also when I logged into the SAP and I can see some error messages in sm21
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 DIA 02 000 SAPSYS            BY4 Database error 2289 at INS access to table DDLOG
18:18:23 DIA 02 000 SAPSYS            BY0 > ORA-02289: sequence does not exist#
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
Its like I am able to display SCC4, when I change to change mode, I get the below error message
"System error: Unable to lock table/view T000"
Can you help
Thanks
Senthil

Similar Messages

SAP CRM 2007 installation in cluster

Dear Experts,
We are about to start the installation of CRM 2007 (ABAP+JAVA) with
Oracle 10g on Windows x64 in cluster environment. In the SAPINST dialog
box under High availability option, I could see installation options like ASCS
Instance, SCS Instance, First MSCS node, Database Instance, Additional
MSCS Node, Enqueue Replication Server, Central Instance and Dialog
Instance.
I have gone through the installation guide. I have below queries
regarding the same. Can you please clarify the same
1) Our requirement is we want to have an ACTIVE-ACTIVE cluster setup
with sap service running in Node A and Database running in Node B. Can
we have this setup in ABAP+JAVA setup
2) Also,in the SAPINST dialog box as said above except last two
(Central and Dialoge instance) as per standard installation guide are
to be installed in shared drives as per the requirement. But, central
and dialog are said to be installed locally on any one node in MSCS or
in separate server. As per my understanding Dialog instance will be
used for load balancing which we do not require now. Hence I feel this
is optional in our case. Where as Central Instance I am not able to
understand why this option is for? Is it mandatory to be installed or optional. If
so, when I installed it in one of the MSCS node the incase of failover
how does it effect the system. As per my understanding ASCS and SCS
comprise central instance.
Please clarify and thanks in advance.
Regards,
Sharath Babu M
+91-9003072891

I am following as per the standard installation guide.

SAP ERP 2005 installation in Cluster mode on Solaris Platform using LDoms

Hello Gurus,
We want to install SAP ERP 2005 (ECC 6.0 SR3) on Solaris 10, (Solaris cluster 3.2). Please let me know the procedure.
What would be the basic steps or difference while performing installation. Also if anybody can give the mount point details in cluster mode will be the great help.
The installation will active-passive like CI and DB will be in the different system.
Also i would like to address that we will be using SUN's Logical domain i.e. we will install DB + Application 1 on one server and CI + Application 2 on second server.
In that case DB + CI will be in cluster mode, and App 1 and App 2 will act as load balancing.
Db is Oracle 10g and OS is Solaris 10.
If any other details you guys want, i will be glad to put here.
Thanks & Regards,
Kshitiz Goyal

> We want to install SAP ERP 2005 (ECC 6.0 SR3) on Solaris 10, (Solaris cluster 3.2). Please let me know the procedure.
> What would be the basic steps or difference while performing installation. Also if anybody can give the mount point details in cluster mode will be the great help.
I suggest you get a good Sun consultant on-site and discuss that with him. It would be a LOT to write here and there are always at least two possibilities of doing such an installation.
The normal installation guides cover the differences between a normal installation and an HA installation, on top there is a lot of documentation available at Sun (http://docs.sun.com/app/docs/doc/820-2562) and also http://wikis.sun.com/display/BluePrints/UsingSolarisClusterandSunClusterGeographic+Edition
Markus

SAP database cluster for oracle 10g

Dear Experts,
Can anybody give me some idea on how do SAP database clustering for oracle 10g on two different remote system.
Is there any sapnote for this or any other help document. Is it possible to do on two different remote system.
Please guide me.
Thanks n regards
Bhaskar

Hi Bhaskar,
do you have SDN account, that allow you to access customer available information in SDN?
If yes, please look at the
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">MSCS Configuration and Support Information for SAP NetWeaver '04 and 7.0</a>
On page 20 you will find some helpful information.
best regards

Netweaver 2004s installation problem on Windows: Oracle 10G

Hi Friends,
I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
The server has 6GB RAM and has 5GB of free space on C: and a free sapce of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver 2004 S installation???
I am installing a central system.
First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
I chose Install MCOD and proceeded further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
Have any of you faced this problem ? Please let me know how you have proceeded further.
Before starting the installation one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system and even then i proceeded with the installation.
Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
Thanks
Diwakar

Hello Diwakar,
If you are just installing NW2004s then it is not mandatory to install Solution manager.
To increase the swap space --
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
you canIncrease swap space/page file here.
Do not install the system as MCOD, make the seperate database.
Do revert for further doubt.
Best Regards,
Sachin.

ORA-12560: TNS:protocol adapter error Oracle 10G

hi,
I just installed Oracle 10G Express Edition. Installation was successful, when I tried to connect the database using
Scott/tiger or hr/hr it does not Connect and throwing an exception :
ORA-12560: TNS:protocol adapter error
How can I get rid of this error to connect to the database.
I am using Windows Vista 64 Bit OS....
Thanks
SUDHEER
Edited by: user9274918 on Mar 4, 2010 8:49 PM

user9274918 wrote:
I am using Windows Vista 64 Bit OS....IF you are using DHCP to get the IP address, and you have not installed the Microsoft Loopback Adapter, the chances are very high that you will get 12560.
It is also possible to get that message is you are not using the same adapter (or do not have networking) when the listener attempts to start or when trying to connect.
Post the results of
ipconfig /all
lsnrctl status
and the contents of the listener.ora and tnsnames.ora found in the %ORACLE_HOME%\network\admin directory
And tell us what steps you skipped/missed in the install doc at http://www.oracle.com/pls/xe102/homepage

More than one SAP systems on same Windows Server 2003 - Oracle 10g

Hello Experts,
We have Windows Server 2003 with 32 GB RAM, 2 quadcore CPU, plenty of space. Already running with NW 700 AS Java on Oracle 10g.
Now we need to install a seperate NW 700 AS Java central instance - so please help me in clarifying following doubts - we don't want to use MCOD.
1. Do we need to install Oracle 10g software again or we can use the existing Oracle 10g installed files. If yes then will the Oracle Home for both the SAP instances will be same - any steps needs to be done for that.
2. Any other steps which needs to be taken care before and after the second instance installation.
3.SAP Note 98252 - speaks about changes in oraInst.loc before the second instance installation - Does it applicable for Windows - Oracle environment also. I am not able to find out this file.
Listener and Tnsnames file changes mentioned in this note seems to be applicable on windows platform also.
Pointers to related documentation would be highly appreciated.
Thanks
Davinder

Hello Davinder,
> 1. Do we need to install Oracle 10g software again or we can use the existing Oracle 10g installed files. If yes then will the Oracle Home for both the SAP instances will be same - any steps needs to be done for that
Theoretical you can use the same ORACLE_HOME, but i would really recommend to install the database software again in a different ORACLE_HOME. It will make a lot of things easier
> 2. Any other steps which needs to be taken care before and after the second instance installation.
The same as by the first installation, but keep in mind of the listener port - you will need to specify a different one.
> Does it applicable for Windows - Oracle environment also. I am not able to find out this file.
On windows it is a registry key (for more information please take a look at metalink note #564192.1)
C:\>reg query HKLM\SOFTWARE\ORACLE /v inst_loc
Regards
Stefan

Character set error oracle 10g

I have a 10g TARGET database with a single byte character set of western european and 9i SOURCE databse with multibyte character of UTF8 since the character sets are different to load data from 9i to 10g I am using national character set NCHAR columns on target database to store the multi byte data :
this is the table i am working on loading
CREATE TABLE RAN_TEST1_MDL
( MODEL_ID NUMBER(15) NOT NULL,
PRODUCT_ID NUMBER(15) NULL,
MODEL_CODE NVARCHAR2(540) NULL,
ODM_CODE NVARCHAR2(900) NULL,
MODEL_DESC NVARCHAR2(1200) NULL )
tablespace csn_d_01 LOGGING NOCOMPRESS NOCACHE NOPARALLEL MONITORING
The table is test table on oracle 10g database .
This is the query I am running
INSERT /*+append*/ INTO WORK_HIER_MDL(
MODEL_ID,
PRODUCT_ID,
MODEL_CODE,
ODM_CODE,
MODEL_DESC
SELECT
MODEL_ID,
PRODUCT_ID,
MODEL_CODE,
ODM_CODE,
MODEL_DESC
FROM SHLD_HIER_MDL
shld_hier_mdl is source table from oracle 9i multi byte UTF8 database.
WORK_HIER_MDL is target table on oracle 10g single byte western european databse
Error : ORA-29275: partial multibyte character
When I describe the source table SHLD_HIER_MDL ( on 9i oracle accesed thru a db link ) I get the following error
ORA-01460: unimplemented or unreasonable conversion requested
I think ORA-29275 and ORA-01460 are correleted . Can anyone suggest what could be the cause for this ? Thanks

Error:     ORA-29275 (ORA-29275)
Text:     partial multibyte character
Cause:     The requested read operation could not complete because a partial
     multibyte character was found at the end of the input.
Action:     Ensure that the complete multibyte character is sent from the
     remote server and retry the operation. Or read the partial
     multibyte character as RAW.
you can export the table and import on 10g.Rename the table,create your test table and use IAS.

Error : Oracle 10g with windows 2008

Hello Experts,
We are installing Solution manager 4.0 on windows 2008 with oracle 10g(10.0.2.0)
It shows "checking operating system version must be 5.1 or 5.2 actual 6.0.
<<<<<Failed".
If orcle 10g for windows 2008 is available on the sap marketplace, please provide us the link for that.
Please recommend any other oracle version compatible to the windows 2008 fro solution manager 4.0.
We have exiting system landscape production server on windows 2003 with oracle 10g Is it compatible with the windows 2008 with oracle 10g?
Thanks & Regards,
Abha

> Please recommend any other oracle version compatible to the windows 2008 fro solution manager 4.0.
Read
Note 1303262 - Oracle on Windows Server 2008
You have to also patch your sapinst.
Markus

500 Internal Server Error (Oracle 10g AS version 10.2.1.0.2

Hi,
I have installed Oracle 10g AS version 10.2.1.0.2 on my machine. Oracle Database is also on the same machine. I am trying to incorporate the Look & Feel functionality in a demo application. I have downloaded the Look & Feel project from the net. This does not use jInitiator. It uses the Sun Java Jre 1.4 instead. I have created a config in the formsweb.cfg also, however, when i run the form it gives me error;
500 Internal Server Error
Forms Servlet Error.
Please check the servlet configuration to make sure this value specifies a valid file.
The config is as below;
[javaplugin]
form=laf_demo.fmx
userid=dev/dev@orcldev
baseHTMLJInitiator=webutiljpi.htm
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_09/index.html
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,4,0,0
WebUtilArchive=frmwebutil.jar,jacob.jar, laf.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
Can anyone please help what should i do to get over with this problem.
Any help would be highly appreciated.

Look for the pathset at metalink. The patchset includes a README file that details the procedure. You should read it through, since there are several notes you should be aware of and you should determine if the particular upgrade procedures apply to your specific environment.
One more thing, I suggest you to upgrade to 10.2.0.4.0, the latest patchset available for this platform.
~ Madrid
http://hrivera99.blogspot.com/

Installation of translationhub in oracle 10g

hi i am completely stuck,i want to know how to install translation hub in oracle 10g.i feel lost after searching google and oracle.pls help

hi i am completely stuck,i want to know how to
install translation hub in oracle 10g.i feel lost
after searching google and oracle.pls helpWhat problem are you having with Translation Hub?
Which version of iDS do you have?
The most common problem is with incompatible Database Character Set or incompatible Oracle Version. For instance, using 9iDS, I can only install Translation Hub on 8.1.6, 8.1.7 or 9.0.1. So, I was unable to install on 10.2.0.1. Also your Database Character set need to be compatible with that supported by Translation Hub.

Installation Solution Manager on Oracle 10g / AIX 6.1 - Oracle Patches

Hi guys,
I have a question.
I'm on a project to install ERP 6.0 and I will start installing Solution Manager 7.0 EHP1, through no fault, the project is long overdue and urgently need the Solution Manager for the team project starts.
The SAP platform is AIX 6.1 / Oracle 10.2.0.4. When I'm installing the central instance of Solution Manager, where the process to install Oracle Database Software Installation, then Current Patch Set (10.2.0.4) and lastly Required Interim Patches, which would be the point 4.7.4 of the Installation Guide SAP Solution Manager 7.0 including SAP Enhancement Package 1 on AIX - Oracle, can jump this last step (Required Interim Patches) and install these patches later ????? O is mandatory to install the Interim Patches to continue installing of SM.
Thanks a lot.
Desiré

Hello Desirée
If you take a look at the note, Oracle/SAP have change the patches policy.
Currently there is only ONE "patch" to be installed.
It is called a SAP patch Bundle (or something like that)
It contains the latest PSU, and all required SAP individual patches.
It must be installed with Mopatch.
it has been released the 10th of this month.
This can facilitate the task of installing patches (only one to "take care off"

Standby database creating error oracle 10g

Hi
i created standby database,but i cannot access primary database data. the standby database opened read only.
but i cannot access data from primary.so i check query in standby database,
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
no rows selected.
what i mistake
Regards
S.Azar

It you are not seeing any errors in the primary alert log, then I think that you have defined log_archive_dest_2 to use LOCATION instead of SERVICE. Archive logs have to be transmitted through Oracle Net in order to be automatically registered by the standby database.
Hope this helps.
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
[Backup and Recovery of OCR|http://oracleracexpert.blogspot.com/2009/08/backup-and-recovery-of-ocr-oracle.html]

PLS-00114: identifier too long error (Oracle 10g)

Hi All,
Hi All,
I have created procedure called "p_procedure_for_cals_annual_sal_oracle_proprierty.lib".
It is must to give the procedure name as mentioned.(>30 Chars)
But while executing I am getting following error.
SQL> exec p_procedure_for_cals_annual_sal_oracle_proprierty.lib
BEGIN p_procedure_for_cals_annual_sal_oracle_proprierty; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00114: identifier 'p_procedure_for_cals_annual_sal_' too long.Please give me suggestion to execute this procedure.
Thank you.
Edited by: user636482 on Mar 22, 2009 9:57 PM

I think you've mistaken EXEC(UTE) with START or @
Execute
Executes a single PL/SQL statement. The EXECUTE command is often useful when you want to execute a PL/SQL statement that references a stored procedure.
Start
STA[RT] {url | file_name[.ext] } [arg...]
Runs the SQL*Plus statements in the specified script. The script can be called from the local file system or from a web server. Only the url form is supported in iSQL*Plus. You can pass values to script variables in the usual way.
Here's a copy/paste of a test:
the file (some_long_name_with_many_characters.sql)
set serverout on
Begin
dbms_output.put_line('A line of text...');
End;
/The SQL*Plus session:
SQL> exec some_long_name_with_many_characters.sql
BEGIN some_long_name_with_many_characters.sql; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00114: identifier 'SOME_LONG_NAME_WITH_MANY_CHARA' too long
ORA-06550: line 1, column 43:
PLS-00103: Encountered the symbol "SQL" when expecting one of the following:
<an identifier> <a double-quoted delimited-identifier> delete
exists prior <a single-quoted SQL string>
The symbol "<an identifier> was inserted before "S
SQL> @some_long_name_with_many_characters.sql
A line of text...
PL/SQL procedure successfully completed.
SQL> sta some_long_name_with_many_characters.sql
A line of text...
PL/SQL procedure successfully completed.
SQL>

SAP R/3 4.6C Installation in HPUX /oracle 10g - Error ORADBUSR_IND_ORA

Hi all
While installing 4.6C in Oracle 10g/HPUX, I get the below error towards the end.
Can some help me to over come this error
Regards
Senthil
. Oracle Version:                     10.2.0.2.0
. Parametervalue os_authent_prefix:   OPS$
. Schema Id:                          R3
. Database User (Schema):             SAPR3
. SAP R/3 Administrator:              OPS$SUPADM
unable to assign default tablespace to user: SAPR3
begin
ERROR at line 1:
ORA-00959: tablespace 'PSAPUSER1D' does not exist
ORA-06512: at line 90
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
ERROR 2008-03-11 20:15:46 ORADBUSR_IND_ORA ExecuteCheck:0
    Exit code from /oracle/SUP/102_64/bin/sqlplus: 191.
ERROR 2008-03-11 20:15:46 ORADBUSR_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-03-11 20:15:46 ORADBUSR_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-03-11 20:15:47 Main
    Installation aborted.

After editing the sql script
Edit the oradbusr.sql file in the installation directory and change
the row
if substr(upper('&&1'),1,5) = 'SAPR3' then
to
if substr(upper('&&1'),1,5) = 'SAPR3notCorrect' then
not supported:
Schemaowner has to be SAPR3 or SAP<SID> where <SID>
has to be a three digit Identifier starting with a character
begin
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 32
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
ERROR 2008-03-12 09:32:34 ORADBUSR_IND_ORA ExecuteCheck:0
    Exit code from /oracle/SUP/102_64/bin/sqlplus: 110.
ERROR 2008-03-12 09:32:34 ORADBUSR_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-03-12 09:32:34 ORADBUSR_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-03-12 09:32:34 Main
    Installation aborted.
Can you help
Regards
Senthil

SAP 4.6C Installation in Cluster error - Oracle 10g HPUX 11.23

Similar Messages

Maybe you are looking for